NI-VISA step by step configuration under linux

Hi!
I need to connect and acquire a codebar reader connected to RS232.
I have: P4 2.4GHz with PCI6023E, mdk 9.1, LV 6.1 comedi, nicvirte and nivisaserver - nivisa drivers correctly installed and running. Serials RS232 are named ttyS00 and ttyS01 under /dev. devfs is running.
Q:Which name belongs to ttyS0x under linux?
Q:There are some literature on this arg?
note: running "find Serial ports.vi" and probing "VISA find resource" icon the result is:
'ASRL1::INSTR' (=> ttyS01?)
Well, trying to read a barcode, with 'LabVIEW <-> Serial.vi' i have no error and no reading. note cpu load for lv process go to 99%!
Any advice?? thanks in advance!
tetractis

Hi,
I find a few things strange here. First normally linux distributions name the serial ports ttySx (where Com1 == ttyS0, Com2 == ttyS1, ...).
Is this just the way mandrake sets things up or is there somthing else at play here?
Secondly make sure that you have +rw permissions for the ports you are trying to get at.
You may also want to test functionality by using something like minicom to test that the data is comming into the port and being transmitted/received correctly.
Hope this helps out!
Aaron K.
Application Engineer
National Instruments

Similar Messages

Vhost configuration for Adobe Media Server running under linux.

Please help me with Vhost configuration for Adobe Media Server running under linux.
I was running a media sharing website for which I wanted to use Adobe Media Server.
To use, AMS, I disabled the already installed Apache server and installed AMS along with the built in Apache server. I could successfully install AMS and could login to AMS Admin Console through my IP number.
My existing website, www.mydomain.com is having its contents located at:
/home/mydomain/public_html
(Directory created under the old version of Apache not bundled with AMS)
Users will be uploading their videos, which will get transcoded and will be delivered to the website visitors in the existing scenario.
To use this website with AMS, this is what I did:
I created a folder for my domain, www.mydomain.com as below
/opt/adobe/ams/conf/_defaultRoot_/www.mydomain.com
Copied Application.xml and Vhost.xml from /opt/adobe/ams/conf/_defaultRoot_/ and pasted them in /opt/adobe/ams/conf/_defaultRoot_/www.mydomain.com
In the Application.xml file there are 2 entries:
<Alias name="mydomain.com"></Alias>
<AppsDir>${/home/mydomain/public_html}</AppsDir>
Please help me with further steps to be completed:
Do I need to create a separate VirtualHost entry in the Apache installed with AMS?
If yes, can I specify already existing document root for my website (/home/mydomain/public_html) or do I need to create a separate folder under webroot/Apache ?
If yes to point 2 above, then do I need to copy all the existing contents from /home/mydomain/public_html to the newly created folder ?
I hope, I can serve all my static contents like html pages and php and media like video/audio. In that case do I need create alias to my Media/Alias folder or AMS will automatically start streaming when a video/audio is requested ?
What other steps do i need to complete?
Any help in this regard would be highly appreciated.
Thanks and Regards

Dear sir or madam,
Here is Letswin Technology, which specializes in global servers, web hosting, VPS, VPNj. If anything I can do for you, pls contact us!
Have a nice day!

The step-by-step procedure of configuring Split-Valuation

Hi
Can anyone give the step-by-step procedure of configuring Split-Valuation
cheers
MaruthiRam

Hii,
To used split valuation, you have to activate it using 'OMW0'.
To change split material valuation once it has been set, you must
1. first post out all stocks (for example, to a cost center or with movement type 562)
2. then change the control parameters
3. if necessary, change the automatic account determination
4. finally post the stocks back in again
In split valuation, you can distinguish between partial stocks of a material according to certain criteria and valuate them separately.
The material stock is divided according to valuation category and valuation type.
The valuation category determines how the partial stocks are divided, that is, according to which criteria.
The valuation type describes the characteristics of the individual stocks.
With the function "Setting" you can determine:
which valuation categories exist in your company (global categories)
which valuation types exist in your company (global types)
which valuation types belong to which valuation category
which valuation categories exist in a valuation area (local categories)
Your entries are only relevant if you set split valuation as active in the function "Global settings".
In the standard SAP R/3 System, the following valuation categories are default settings :
B procurement type
with the valuation types:
"EIGEN" for in-house production
"FREMD" for external procurement
H Origin
X automatic valuation (only for batch)
To select split valuation ('OMWC'), proceed as follows:
1. Determine the valuation categories and valuation types that are allowed for all valuation areas:
    global valuation categories via menu "Goto --> Global Categories"
    global valuation types via menu "Goto --> Global Types"
2. Allocate the valuation types to the valuation categories.
     a) Select "Goto --> Global Categories".
     b) Position the cursor on a valuation category and select
        "Goto --> Global Categories --> Assignments --> 'Types->Category'".
     c) Activate the valuation types you want.
3. Determine the local valuation categories for each valuation area.
     a) Select "Goto --> Local definitions".
     b) Position the cursor on a valuation area and select
         "Goto --> Local Definitions --> Allocate Categoires->Org.units (button Cats->(OU)".
         You obtain a list of the global valuation categories.
     c) Activate the categories to be used in this valuation area.
         The system creates the local valuation types based on the allocations under point 2.
         Only now can you create a master record with split valuation.
Specifying Split Valuation by creating Material Subject to Split Valuation
1. Create a material master record, selecting the Accounting View 1.
2. Enter your data as required on the Accounting data screen, specifying a valuation category.
     (If you can't find the valuation category field, it might be hidden, use OMSR to define the Field Groups.
      Look for the field MBEW-BWTTY for Valuation category).
3.   Be sure that the price control indicator is V for moving average price and enter a moving average price.
4.   In the case of split valuation, you can create only one valuation header record with price control V because the
      individual stock values are cumulated, and this total value is written to the valuation header record. This is where the
      individual stocks of a material are managed cumulatively. To do this, fill in the Valuation category field on the accounting
      screen when you create the material master record and leave the Valuation type field blank.
5.   Save your data and the system creates the valuation header record.
6.   The initial screen appears.
7.   Extend the material by creating new material master records from the Accounting view 1. For the first material, specify a
      valuation type in the Organizational Levels dialog box and enter the respective accounting data on the data screen.
      Proceed likewise for the other materials, distinguishing between them by valuation type. To do this, call up the material in
      creation mode again. Due to the fact that a valuation header record exists, the system requires you to enter a valuation
      type for the valuation category.
8.   Repeat step seven for every valuation type planned.
You want to valuate the stock of material XYZ that you obtain from manufacturer A in Los Angeles at a different price than the stock you obtain from manufacturer B in Detroit. In this case, the valuation category is H for origin. Your valuation types can be LOS ANGELES and DETROIT.
If a material is subject to split valuation, every quantity (sub-stock) of this material must be assigned to a valuation type (for example, country of origin).
For every valuation type, there are two types of data in the system, as follows:
Valuation data (for example, valuation price, total stock quantity, total stock value), which is defined for every valuation type at valuation-area level and applies to all dependent storage locations.
Stock data, which, like batch data, is managed separately for each storage location. If a material that is subject to split valuation is also subject to management in batches, its stock data is not managed by valuation type, but rather by batch. Every batch is assigned to a valuation type.
The stock quantity, stock value, and valuation price for all valuation types are managed cumulatively at valuation-area level.
Must the Valuation Type Exist Before the First Goods Receipt?
You can post the goods receipt of material of a certain valuation type only if the valuation data for this valuation type already exists, because the system valuates the goods receipt at the price defined in the valuation data. On the other hand, the stock data for the valuation type is created automatically during the first goods receipt into the storage location, if this is defined in Customizing for Inventory Management.
Goods Movements with Materials Subject to Split Valuation
If you want to enter goods movements for materials subject to split valuation, you must enter the valuation type in addition to the material number.
Enter the valuation type in the Batch field for MB01.
In MIGO, there is a valuation type field in Detail data -> Material.
Regards,
Kumar

Need Step-by-step configuration of SAP TR

Hello all,
Can any one please share the step-by-step configuration steps for configuring SAP-TR module... basically looking to configure the securities and derivatives. plz send to Text Removed
Thanks alot in advance.
Regards,
Satish Setty
Edited by: Lakshmipathi on Jan 26, 2012 9:17 PM
Stick to forum rules and dont ask to share SAP information to personal mail

Hello Satish,
configuration depends on the business demands of your company or customer. In a delivered system (client 000) you can find example customizing as proposed by SAP. Next to customizing steps you usually have documentation related to the step.
Customizing for Treasury Management is mostly under the tree:
Financial Supply Chain Management->Treasury and Risk Management
BR,
Tomislav

Step by Step Credit Mgmt Configuration

Hi Gurus,
                 Can any body give me step by step Credit Mgmt.configuration to me?
Points will be awarded for good answers for sure.
Looking forward for your hlep.
VCS

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIARCR/FIARCR.pdf
How To Do Configuration For Credit Management
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored.   This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors.
Regards,
Rajesh Banka
Reward points if helpful

Step by Step Oracle 10g ASM Installation on Linux

Hello,
Can any body provide me link for step by step 10g ASM Installation on linux (i.e from disk partitioning to final configuration). I searched on GooGle but didn't find ASM alone, though there were many step by step for RAC environment. I want to first learn ASM alone. Please help me as I'm first time learning ASM.
Looking for Kind reply
Regards,
Abbasi

You should check the oracle learning library for any such doubts,
http://apex.oracle.com/pls/apex/f?p=9830:28:0::NO:RIR:IR_PRODUCT,IR_PRODUCT_SUITE,IR_PRODUCT_COMPONENT,IR_RELEASE,IR_TYPE,IRC_ROWFILTER,IR_FUNCTIONAL_CATEGORY:,,,,,automatic%20storage%20management,
HTH
Aman....

Step by Step 10g ASM Installation on Linux

Hello,
Can any body provide me link for step by step 10g ASM Installation on linux (i.e from disk partitioning to final configuration). I searched on GooGle but didn't find ASM alone, though there were many step by step for RAC environment. I want to first learn ASM alone. Please help me as I'm first time learning ASM.
Looking for Kind reply
Regards,
Abbasi

Abbasi wrote:
Hello,
Can any body provide me link for step by step 10g ASM Installation on linux (i.e from disk partitioning to final configuration). I searched on GooGle but didn't find ASM alone, though there were many step by step for RAC environment. I want to first learn ASM alone. Please help me as I'm first time learning ASM.
Looking for Kind reply
Regards,
AbbasiHi Abbasi,
It would be better if let me know version of Linux, how you plan to use the disk (direct or UDEV), RAC or Single instance.
Anyway, I'll assume you've using OEL/RHEL 5, UDEV for Single Instance (Oracle 10g installed) and only one disk (/dev/asm_disk1) configured for testing purpose.
Creating ASM instance on Linux (Single Instance) using DBCA
1. Add disk to Linux server
2. Configure UDEV for the device. E.g /dev/sdb -> /dev/asm_disk1 //check Oracle documentation for configure UDEV on RHEL/OEL 5. You can directly use /dev/sdc for testing purpose.
3. Change the owner of the disk. e.g. chown oracle:oinstall /dev/asm_disk1
4. As root user, run Oracle CSS script. The Cluster Synchronization Services (CSS) daemon provides cluster services for ASM, communication between the ASM and database instances, and other essential services
# $ORACLE_HOME/bin/localconfig add
5. As oracle user, run DBCA (X11 needed)
$ dbca
6. Select the "Configure Automatic Storage Management" option, then click the "Next" Button.
7. Enter a password for the ASM instance, then click the "Next" button.
8. On the confirmation screen, click the "OK" button to create the ASM instance
9. Once the ASM instance is created, you are presented with the "ASM Disk Groups" screen. Click the "Create New" button.
10. On the "Create Disk Group" screen, enter Disk Group Name of e.g. "DATA" and select the required level of redundancy.
•     External - ASM does not mirror the files. This option should only be used if your disks are already protected by some form of redundancy, like RAID.
•     Normal - ASM performs two-way mirroring of all files.
•     High - ASM performs three-way mirroring of all files.
11. If you didn't find any disk, click "Change Disk Discovery Path..." and enter "/dev/asm_disk1"
12. Select "External" for redundancy, tick the disk (/dev/asm_disk1) and click "OK" button.
13. On the "ASM Disk Groups" screen. Click the "Finish" button.
To access the ASM instance :
1. As oracle user, export the ORACLE_SID
$ export ORACLE_SID=+ASM
2. sqlplus "/as sysdba"
3. SQL> select name, total_mb, free_mb from v$asm_diskgroup;
SQL> select name, path, header_status from v$asm_disk;
To access the ASM command line utility:
1. As oracle user, export the ORACLE_SID
$ export ORACLE_SID=+ASM
2. Enter the asmcmd command
$ asmcmd
You also can refer to :
<a class="jive-link-external" href="http://www.idevelopment.info/data/Oracle/DBA_tips/Automatic_Storage_Management/ASM_10.shtml">http://www.idevelopment.info/data/Oracle/DBA_tips/Automatic_Storage_Management/ASM_10.shtml</a>
<a class="jive-link-external" href="http://forums.oracle.com/forums/thread.jspa?threadID=1102203&tstart=1">how to create an asm instance manaually? oracle 11gr2.
Regards,
Hafiz Abdullah

Installing VISA USB device under Linux

Well, well, well... I've never though that such a time will come, but...
Linux. The question is about it.
It so happend that i need to install a custom made usb device under that OS. I've created the driver using NI-VISA driver development wizard and my device works fine under windows. But i don't know how to create a driver for Linux and how to install it there. Any ideas? Any???
www.xinstruments.com
Custom Software for Industrial Automation
www.hdrconverter.com
Picture processing made easy

Shawn B. wrote:
> It looks like you are running Mandriva 2006 (as opposed to 10.0). 
> The version of NI-KAL that shipped with NI-VISA 3.4 does not support
> Mandriva 2006.  The good news is you can download a newer version
> of NI-KAL that will install on Mandriva 2006 from:
>
> <a href="ftp://ftp.ni.com/support/kal/1.2/"
> target="_blank">ftp://ftp.ni.com/support/kal/1.2/</a>
>
> Install NI-KAL then run updateNIDrivers.
>
> Shawn B.
> National Instruments
This is not exactly an enlightening answer for a typical Linux user. I too
am having difficulty installing this under Debian Etch.
Linux distributions are made of components, the name on the label is a
little meaningless (in my years of experience with Linux, I am yet to find
a single program that will compile with one distro but not another, given
the same tools). So what components exactly does this driver depend upon ?
What am I missing here ? Is it my custom kernel (this is a Debian Etch
system) or some bug in the supplied drivers ?
The installer identified the following :
Checking required install tools...
Checking installer tool versions...
rpm 4.4.1 can be used with a default installation path
tar 1.15.1
Checking dependencies...
glibc 2.3.5
X /usr/X11R6/bin/X
Terminal /usr/X11R6/bin/xterm
Unpacking install files to /tmp/ni4882.install...
My error messages :
The following components, totalling 28444KB, have been selected
for installation:
LabVIEW 7.0 Run-Time Engine
NI-PAL
NI-KAL
NI-488.2 Help
NI-488.2 Utilities
NI-488.2 Driver
Continue? [Ynq] Y
* NI-KAL 1.0.0f0 for Linux/x86
This installer will install the NI software using the targz.
This software is covered by the included license file (LICENSE.txt).
By installing this software you are acknowledging acceptance of the
terms of the license.
The installation location for NI-KAL is /usr/local. A natinst/nikal
subdirectory will be created at the specified location.
Installing:
NI-KAL => /usr/local/natinst/nikal
Extracting /tmp/ni4882.install/kal/nikali-1.0.0-f0.tar.gz to /usr/local/...
Checking required tools...
Configuring for linux kernel version 2.6.14.3-raja.
********************************* NOTE *********************************
Using kernel headers found in /lib/modules/2.6.14.3-raja/source.
If this does not correspond to the location of the 2.6.14.3-raja headers,
then define KERNELHEADERS in your environment to point to the location
of the kernel headers, define KERNELTARGET as the version of the
kernel for which to compile, and then rerun ./configure.
********************************* NOTE *********************************
Kernel has reparent_to_init(): yes
Number of arguments for do_munmap(): 3
pte_offset function: pte_offset_kernel()
Number of arguments for remap_page_range(): 4
Kernel has get_user_pages(): yes
Kernel exports get_user_pages(): yes
USB altsetting name: cur_altsetting
Kernel has usb_get_intf(): yes
Kernel has intf_cache member in usb_host_config: yes
Kernel exports usb_set_configuration(): no
Kernel has usb_endpoint_running(): no
Storing configuration in Makefile.in
If the values stored are incorrect they can be changed before running make.
Installing Kernel module...
/bin/cp nikal.c objects/nikal.c
/bin/cp nikal.h objects/nikal.h
make -C /lib/modules/2.6.14.3-raja/source
SUBDIRS=/usr/local/natinst/nikal/src/objects modules
make[1]: Entering directory `/usr/src/linux-2.6.14.3'
CC [M] /usr/local/natinst/nikal/src/objects/nikal.o
In file included from /usr/local/natinst/nikal/src/objects/nikal.c:86:
/usr/local/natinst/nikal/src/objects/nikal.h:172: warning: 'packed'
attribute ignored
/usr/local/natinst/nikal/src/objects/nikal.c: In function
'nNIKAL100_vmaClose':
/usr/local/natinst/nikal/src/objects/nikal.c:196: sorry, unimplemen

What are the steps involved in configuring Oracle EBSR12 after installation

What are the steps involved in configuring Oracle EBS R12 after installation is complete?
We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
Please direct me to the documents that can be followed to do initial steps for the application functionality to work.
Thanks,
SR

What are the steps involved in configuring Oracle EBS R12 after installation is complete?
We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
Please direct me to the documents that can be followed to do initial steps for the application functionality to work.All Oracle EBS Docs 11i/R12 can be found at:
Oracle Applications Documentation
http://www.oracle.com/technetwork/documentation/applications-167706.html
Thanks,
Hussein

Errors in few of the step while running configuration wizard for PI 7.0

hi all,
i have installed Netweaver 2004s (PI 7.0) quality. during installation i had chosen sld option to be my development system as i wanted to use just single SLD.
now for the post installation steps i had run Configuration wizard. i haven't yet implemented Note : 939592 : PI Usage configuration versus Central SLD as it says first i need to perform all CTC steps.
now in this i got error in few steps:
STEP1 : PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
the error was: CIM_ERR_FAILED: Object manager is not activated
PI_05_This wizard will configure the integration server for sld.
The error was:
Error: CIM_ERR_FAILED: User credentials are invalid or user is denied access
PI_09_This wizard will configure Role of Integration server
Not able to load function SXMB_SET_ROLE_TO_IS( Connect to SAP gateway failed).
What should i do?
Regards,
Priyanshu Srivastava

Hi Priyanshu,
"Object manager is not activated" simply means, that the SLD server is not started. So, please, first of all navigate to the SLD URL http://<host>:<httpport>/sld, login with an administrative SLD user -> Admininstration and push the star button.
Regards,
Blanca

How To Configure Or Intialize Portal Installed With BI7.0 - Step By Step

Hello Gurus
How do I configure or start working on portals which is installed as part of BI 7.0 installation that is EP and EP Core(Includes BI-JAVA and ABAP Stacks).
Please help me out with possible guidance(if possible Step by Step procedure) how to set up the parameters and at which locations in BI.. I have kept couple of days exploring this site, but I couldnt fine one answer relating.
More over the answers I could find was "To configure technical content, business content and bi admin cockpit," Any help or suggestion provided is grealy appreciated and points will be awarded accrodingly.
Thanking you all gurus in advance,
Regards,
Parvez.

Dear,
Try these links:
http://help.sap.com/bp_epv170/EP_US/BBLibrary/Documentation/N00_BB_Essential_Information_EN_US.doc
http://help.sap.com/saphelp_nw04/helpdata/en/7f/5bfc3f8fc2c542e10000000a1550b0/content.htm
https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TEP12&COLLECTION=43&LANGUAGE=EN
http://sapport.blogspot.com/2008/03/business-intelligence-java-components.html
/people/srinivas.gv/blog/2005/11/28/role-and-configuration-of-isolation-methods-in-sap-enterprise-portal
/people/julia.kielbasiewicz/blog/2005/04/17/integration-of-sap-business-warehouse-and-enterprise-portal-150-single-sign-on
http://help.sap.com/saphelp_nw04/helpdata/en/0f/163c405865e801e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/98e6418b7eca17e10000000a155106/frameset.htm
/thread/189547 [original link is broken]
note: You can as well search in this forum.Im sure there are lots!
Thanks.

Steps involved to Configure a Smartform for printing TO Item

Hi,
I want to develop a Smartform to print TO for each Item.
Currently it is being done using SAP Script.
I checked the Configuration in OMLV and assigned my print program Z****** .
This thing here is I don't see any values passed to my program like TO Number, Whse Number etc when called through LT31.
Where as I assign the standard program RLVSDR40 and debug it all the details are being passed to this program.
I am not sure if I am missing any configuration.
Please help me to figure out the issue and let me know all the steps involved in configuring the Smartforms to print Transfer Orders.
Thanks in Advance.
MK.

Hi Murali,
The SAP delivers the solution to print the TO item by SAPScript, but we can do it by Smartform as well, as in
You need to create a project for the enhancement MWMD0001, because EXIT_RLVSDR40_001 will fulfill your purpose of doing it the other ways i.e. via Smart from.
For this you have to use CMOD transaction to create the project for the above said enhancement.
Note: If you do this way any configuration done via OMNU wont't be considered.
Then after in teh import parameters you have a table XRLDRI, which contains both the warehouse number and the transfer order number, the same can be passed on to the designed Smartform to fulfill your purpose.
Sample Code, you can refer to:
*local variable declaration.
   DATA: l_wa_fm_name            TYPE rs38l_fnam.
* Local Field Symbols
   FIELD-SYMBOLS : <l_fs_rldri> TYPE rldri.
* Local Constant declaration
   CONSTANTS : lc_fmname TYPE tdsfname   VALUE 'XYXYXYXY', "Smartform name, here designated by 'XYXYXYXY'
               lc_chk      TYPE rldrudruck VALUE 'X'.
*Moving Transfer Order Print :Item level data into corresponding work area.
   LOOP AT xrldri ASSIGNING <l_fs_rldri>.
* Determine smartform function module
     CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
       EXPORTING
         formname           = lc_fmname
       IMPORTING
         fm_name            = l_wa_fm_name
       EXCEPTIONS
         no_form            = 1
         no_function_module = 2
         OTHERS             = 3.
    IF sy-subrc = 0.
* Call the function module of the smartform
       CALL FUNCTION l_wa_fm_name
         EXPORTING
           user_settings    = lc_chk
           tanum            = <l_fs_rldri>-tanum
           lgnum            = <l_fs_rldri>-lgnum
         EXCEPTIONS
           formatting_error = 1
           internal_error   = 2
           send_error       = 3
           user_canceled    = 4
           OTHERS           = 5.
       IF sy-subrc = 0.
       ENDIF.
     ENDIF.
   ENDLOOP."LOOP AT xrldri ASSIGNING <l_fs_rldri>.
Please validate the same at your end and let me know in case you require any further inputs from my end.
BR/Thanks
Pranav Agrawal

Workflow step by step configuration for scheduling level agreement release

Hi All,
        I tried alot to configure step by step scheduling level agreement release using workflow.
        But, The release code I couln't pass using workflow.
        Plz guide me, or let me know some useful links for the same.

/Use the user exit M06E0005 to avoid all this problems.
In this user exit you can add your custopm logic based on your org structure and then workflow will take to all of release one by one.

Please tell me the step by step process of HP Tape drive configuration.

Dear all,
we are using ECC5.0 and windows 2003 server and oracle 9i .Please tell me the step by step process of HP Tape drive configuration. I Think initSID.sap file in to change the parameter,but which parameter configure.Please suggest.
Best Regards,
Thiru

Hello Thiru,
Once the backup completes,tape willl be automatically ejected.
I dont think there is any way by means of which you can see the data stored in the disk but yes what you can do is to run the backup with verify option
This BRBACKUP command option verifies the backup after the files have been backed up
Please refer to following for more info.
http://help.sap.com/saphelp_nw70/helpdata/EN/55/c491f37407e74781bc0ebd96befba7/content.htm
Rohit

Need to know the steps to setup 'Configurable Search' in PeopleSoft CRM 8.8

Hi,
Could you please let me know the steps to setup 'Configurable Search' in PeopleSoft CRM 8.8(PeopleTools 8.48)?
Thanks

PeopleBooks > PeopleSoft Enterprise CRM Automation and Configuration Tools PeopleBook > Configuring Search Pages
Nicolas.

NI-VISA step by step configuration under linux

Similar Messages

Maybe you are looking for