Reinit/Reload for added/changed fields in PO line item and GL ODS

Hi all,
Probably this is usual process in SAP BW.
I have changed 2Lis_item data source and added few fields in 0Pur_o1 ods.
In ods there is data from 2006 to till date.
Now I have to move my changes to Production system. I have to delete and reload compele data again then only I will get values for added fields.
Similar way I have changed 0fi_gl datasource and added few new fields in GL field.
What is the best approach I should follow to get all history data with all new values and start delta ?
thanks

Ok,
Just do this:
You've your GL ODS with data from 2006, 2007 and 2008.
You've deltas running.
Before transporting your changes to productive run all the deltas.
Then transport your changes.
After that if you want the history to be updated with your changes you should delete your delta and create a new one without any data (delta init without any data). That should mark the flag init from that point.
This means the next delta will bring any changes created from that new init to front. To load the history you can do full repairs until you have load all your data.
Diogo.

Similar Messages

Adding Special Field in the line item display

Dears Through SPRO settings, I added the field 'Group Account Number' (ALTKT) for the GL line item display.
It is now transported to Quality.
When I try to see that field in the change line item layout, I could not find that field for inclusion.
However, in the SPRO of Quality, I find that field already appearing.
Why it is not appearing in the FBL3N special field screen ?

Hi Niki,
I am not sure how you have added this filed but if you follow these steps you will have it.
1- Run FBL3N and make your settings and execute it (F8).
2- Go menu Settings > Special fields (You can run it by t code OBVU out of FBL3n also)
3- Add a new entry, select your field (BSEG ALTKT Group account number) and save it
4- Back one step (F3) and select "Change layout..." icon.
Now you have the field in "Hideen fields" column. Just select it as "show selected fields"
Regards,
Omid

Exit or badi for me21n- for adding new field in delivery tab(Item level)

HI,
My Requirement is to add the New Field(Inspection Lot) in delivery tab in item level of me21n .
I want to know this can be done by any Exit or Badi or modifying the standard sap is the only way to do this...
Kindly help me to solve the issue..it's quite urgent , i unable to find one,i used the exit mequery1 but did not work ......
Thanks in Advance.

Hi Nagaraju,
Actually,for every T-code,SAP has provided a lot of BADIs where the customer can write their own codes depending
upon the functionality required.
In order to find the BAD for a particular T-code,go to the T-code SE24 and type in cl_exithandler and click on
Display.
You will get a list of methods in that class,double click on the Get_Instance method from the list.
you will get the code for that method.Scroll down and you will find one of the parameters "Exit Name" there.Put a
breakpoint on that function module and press F8.
In the debugging mode,double click on the Exit Name to get the value contained in it.You will see the first BADI
provided in that T-code.
Note down this and then keep on pressng the F8 and noting down the BADIs being displayed.
Now ,you will have to find out the BADI which fits your requirement.
Now,it is not required to opy that BADI into ZBADI.Instead it is better to create a new implementation for this
BADI.
Go to the T-code SE18 and see its definition.
Now,go to the T-code SE19 and create a new implementation and write the code there.
Once done,activate that implementation and the BADI also.
Now run the T-code and debug the code that you have written.You can modify the code accordng to your requirements.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

MEK1 for non value fields in PO line item

Dear all ,
We've the following scenario I need to solve, we are using a Purchase organization BR01 to put PO's text items only. (Non stock materials)
And once we don't have master for these items I'd like to use the MEK1 to set the automatic values to fields "J_1BMATUSE = Material usage and J_1BMATORG = Material origin and J_1BINDUST = Material category" in the tab BRAZIL at item detail on PO.
We know that is possible to extende KOMP , KOMG and KOMV with those fields.
So could I use some condition type with access sequence to transfer values to certain fields on item detail on PO , similar to MEK1 ?
Does anyone has some experience with a situation like that before ?
Best regards,
Ale.

Hi,
At SPRO-MMPurchasingconditionsdefine price determination processMaintain condition table.Here you can create condition tables.
After creating the condition table , come to MEK1 and give the condition type , the key combination which you defined in condition table will come here.select it and create a condition record which will get defaulted in your item condition details.
Please follow all the rules related to pricing procedure.
Regards,

Screen Exit for adding custom fields in Additional Data tab in ME21N

I need a screen exit or whatever other method for adding custom fields to the additional data tab at header level.
I also need a similar exit for adding a filed at item level.
Thanks in advance
Martin

Hello,
1st find badi or exit and then create screen ...and assign the screen group and screen no for that implementation....some steps i can give u i did with SPRO tcode....
please check it for VA02
SPRO u2013 SAP Reference IMG --- Logistics General --- Basic partner u2013 customers -- Control u2013 Adaption of customers own masters data element u2013 prepare modification of customer free enhancement of customer master record
1)Screen group                                  description
        zs                                           creating badi      --- (save)
       click on (label tab pages) u2013 new entries
       number u2013 10 , function code u2013 zs10 , description u2013 func ---(save) u2013(back)
2)select (FM_CUSTOMER_ADD) u2013 copy
     Implementation name u2013 ZAS
     (desc u2013 impl for cust) u2013 (save)
    interfaceu2014(check_add_on_active) double click on it
3)the above screen appear -- write the code in it u2013 (save) --- (activate) u2013 (back) u2013 (save)
     -- (activate) u2013 (back)
   Business adds in customer sub screens
4)select (FM_CUSTOMER_ADD) u2013 copy
     Implementation name u2013 ZAS1
     (description -- cust) u2013 in attribute u2013 (give screen group name)
5)go to interfaces (GET_TAXI_SCREEN) double click on it
   (save) --- (activate)
6)(SAVE) --
    Goto SE38 -- CREATE PROGRAM WITH NAME (ZQW) type module pool
     Goto SE51 -- Prog : ZQW
       Screen : 200 (Create)
      Goto layout u2013 design the screen
7)save u2013 activate
   then goto transaction : va02
For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
u can check the table MODSAP
u can check the table MODACT
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler
Thank u ,
santhosh

Change Assignment Field in the Line Item

I'm trying to change manually the Assignment field in the Line item of a FI Document but the field is not open for entry.
In the SPRO -> Document Change Rules, Line Item settings are correct and should allow change of the field. Do you have any ideas on that problem?

Hi
Assigment field it system given no , the main purpose of this field is to idetify the particular line item system not allowed to chavge that one once u save the document?
Rams

Help- I have added a field in my tabular form and now i get an error in mul

Help- I have added a field in my tabular form and now i get an error in muli update form; Here is the error, how do I go in to change the process, adding the extra field??
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "F10F6D7EC4CF938382C6DC2EE22800F6", item checksum = "90E47F32E95B71B7A9D47A1311063445"., update "CAPRS"."CONTRACT_ERRORS" set "ID" = :b1, "CONTR_NUM" = :b2, "REPT_MONTH_CD" = :b3, "REPT_FISCAL_YEAR" = :b4, "REPORT_FAC_CAGE_CD" = :b5, "END_ITEM_NUM" = :b6, "END_ITEM_DESC" = :b7, "WSSC" = :b8, "WBS_CD" = :b9, "WPC_CD" = :b10, "CONTR_CLIN" = :b11, "CO
Error Unable to process update.

Hi,
I believe the error is due to the checksum process which doesn't have that additinoal field's information. You can try creating the form again with the additional field, or if needed you can go with the Manual tabular form.
Thanks,
Manish

Report for abserving changes made to the customer master and moniter

Report for abserving changes made to the customer master and moniter and detail
Please send with t. code.

Hi Dhari,
Well the requirement seems very simple but its not as simple as it looks.
i have an idea not sure whether it gonna work or not. you need to build a history cube as if i understand your requirement then for any selected period you wanna see the change in wage type or pay rate for each employee if any.
1. pick up an cube that builds on emp transaction data.
2. add the 0empoyee Md, wage type and pay rate from MD to the cube and fill the cube
3.so now every day or in scheduled time interval the MD will load and the corresponding the TD will be loaded to the cube.
4. create a info object say indicator and add it to the cube
5.while loading the data to the cube everyday in tranformation check if for same employee there is a change or not in the wage type and pay rate. If so set the indicator to 1.
4.now build one more cube for holding the changed records from this cube and call it say zhrchange
5. now pull the date, year and related emplyee information for the emplyee to the zhrchange for those with indicator 1.
6. before the next load happen, rememrbe to set the indicator to 0 before checking the conditoin in the transformation routine , so that only if the conditoin satisfy then only it will be 1 else it will be 0.
now the cube zhrchange has all the changed records with time stamp and you can base your query on that to get the changed values in specific time period
hope this helps.

Update Profit Center Field in CO Line item tables

Hi,
We are working on ECC6.0 NewGL with Real-time CO-FI integration for Cross Company Code and Cross Pofit Center.
For those CO internal documents (like activity confirmation at production order) where there is no cross company code or cross profit center postings, no FI document is generated and hence table FAGLFLEXA is not updated. So, we wanted to take data from CO table COEP / COVP for these internal CO documents. However, there is no Profit Center field in CO line item tables COEP / COVP. We don't want to refer to Object Number (OBJNR) of COEP / COVP tables and take profit center from master table of cost centers, IOs etc..,as Profit center in the cost center, IO masters may get changed latter.
I tried to generate a new report through report painter from structure CCSS, but Profit center is not defined as Charactericts there. Hence of no use.
Can we append Profit Center field in CO line item tables COEP / COVP and update tatabase at the time of posting? Is there any risk?
Please suggest any other alternative...
Thanks,
Bijay

Hi,
As per the standard process we can't derive PC from CO-internal Object...as per my knowledge.
Better you can derive from IO-CC master PC ....if your question that it will change frequently then -no control can make.
Regd,
Kha

Assignment Field In Customer Line Item While Credit Note - SD

When Invoice is been Generated through SD , assignment field in Customer Line item is getting SD Invoice number.
But while Generating Credit Note through SD , it is taking Customer
Account number in teh same field. What could be the reason ?
We need Credit memo number in the said field.
thanks in advance.

Visu
These configurations come from the copy controls. In the Copy controls you need to assign the correct requirements, allocation number and the reference number. For the copy controls for your crredit memo document, you need to change it similar to your billing document settings. The transaction code for this is VTFA and VTFL. Hope this helps.
I found a similar thread for your reference in the SDN.
Assignment Field - Accounting Document
Let me know if you need anything else on the same.
Karthik

Need to add new field in Rfx Line Item Page

Hi
I want to add an new extended field in RFX line item page ( Rfx-> line item tab -> click on the pencil icon of any line items )
can anyone help me ?
Regards
Sudipta

Thanks Vikram for your help
I got the line in the foum ( referred by you )
You have to create a customized line item collection from scratch and hide the original one; this is possible (import and export can be included with this but will take some effort and change the reports).
can you please tell me how to create the customized line item collection ?
Regards
Sudipta

Changing date in PO line item

i want to change the date on a PO line item and the corresponding schedule line item to a specific date of my calculation. which userexit would be good to do this.
I am in 46C so donot have BADI's.
Thanks
Kris

Here`s the program to find USER_EXIT ...
REPORT Z_exits.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Also check this link :
http://www.easymarketplace.de/userexit.php
Good luck !
Thanks
Message was edited by: Saquib Khan

Segment Field in vendor line item

Hello Guru,
we have activated new gl functionality with doucment splitting . but we are not able to view the segement filed in vendor line item and customer line item in different reports.
how we can pool that field in variouse report in instead using Zreport.
Thanks and Advance
Laxmi narayan

Hi,
whe we are entering the vendor line item we can enter the Fund and fund Center, our segment will be derived from the fund ( we have done it in a substitution, if the segment is empty we derive it from the fund) and in BSEG table we can see that the segment is filled correctly. But we cannot change it because this fields segment don't appear in the screen. We have reviewed the SAPMF05A 0332 Screen (screen that we can see when we are entering the vendor line item and we push in "More data" button) but the segment field don't appear.
Thanks in advance,
Sap Userr

PO print-preview for a PO with all deleted line items

Hello MM Gurus,
I am not able to print preview of a PO for which i deleted all the line items. It gives me a message saying that no print relevant changes.
Client need to print such POs. Client expects a text like "item cancelled " for deleted PO items.
My understanding is that its standard SAP pre delivered customising however it is not working.
Pls suggest.
Regards,
Pankaj

Ask your ABAPer to modify the smart form, deleted materials wouldn't come for obvious reasons in standard system ... you need to get in customized/ developed.

Balancing field "Segment" in line item 001 not filled while posting through

HI All,
I am experiencing the below error while processing FB70 transaction in Foreign currency with Tax codes (earlier this problem was not there, this is happening recently). The error description as given below.
"Balancing field "Segment" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Segment marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose."
I have verified all the relevant settings like Classify G/L accounts for document Splitting and Document types etc and all settings are seems to be ok.
But in the below two instances, Iu2019m not getting any error:
If posting is done in company code currency with same tax codes.
If posting is done in foreign currency without tax codes
Your early respons is highly appreciated. Thanks in advance.
Thanx & Regards
Ramesh

Hello
Have you chosen Segment as Mandatory for the Scenarios during Document splitting. If not then for the G/L account you are facing problems with goto the field status and make segment field optional.
Thanks and Regards

Reinit/Reload for added/changed fields in PO line item and GL ODS

Similar Messages

Maybe you are looking for