Related to ALV Report
Hi All,
I have a doubt in ALV report.
there is an output which consists of four fields.
1.Employee
2.Organizational Unit
3.Required Compliance Training Not Completed (the specific course (D))
4.% Compliant*
Output should be:
1 2 3 4
1.a b c d
e
f
I mean there is a single row for 4 fields.
and in only 3 rd column there are again 3 rows.
how to display this.
1..4 are columns
a...f are data .
Please tell me.
Thanks,
Geetha.
Hi All,
I have a doubt in ALV report.
there is an output which consists of four fields.
1.Employee
2.Organizational Unit
3.Required Compliance Training Not Completed (the specific course (D))
4.% Compliant*
Output should be:
1 2 3 4
1.a b c d
e
f
I mean there is a single row for 4 fields.
and in only 3 rd column there are again 3 rows.
how to display this.
1..4 are columns
a...f are data .
Please tell me.
Thanks,
Geetha.
Similar Messages
-
Running ALV REPORT in background
Hi Experts ,
Before writing this query , i went through all the threads related to ALV report in background . But found none of them satisfactory .
I am running a alv report in background . I am not using OO ALV . I am using " REUSE_ALV_GRID_DISPLAY" .
This report is schedules through a background job . It is creating a spool .
But I am getting a error message : *" FRONT END NOT AVIALABLE "*
What i have found so far :
I am planning to use sy-batch variable to check whether it is running in background or not , Then I am planning to read the spool and if the spool is created , i will display the ALV .
Is this the correct approach or some other way to generate the ALV REPORT .
Also by this way will the error message *" FRONT END NOT AVIALABLE "* go .
Please advice .
Regards,
AbhishekHello Everyone ,
Thanks for your replies .
I have the spool generated . But it is waiting status .
The issue here is how I am going to say that the spool is in " Completed " status . Because only after when my spool is in completed status , I want to display the status .
Is there way for this ?
Regards ,
Abhishek -
Need Some MM related ALV reports
hi experts,
I want some MM related ALV reports.
please help me out.
thanks a lot,
prerna.Hi Prerna,
check these sites
http://www.geocities.com/mpioud/Abap_programs.html
http://www.geocities.com/mpioud/Z_DEMO_ALV_REFRESH_BUTTON.html
http://www.sapdesignguild.org/resources/MiniSG-old/from_develop/norm_status_icons.htm#positioning_4
http://www.sap-img.com/fu037.htm
http://help.sap.com/saphelp_470/helpdata/en/bf/3bd1369f2d280ee10000009b38f889/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf
http://www.sap-img.com/abap-function.htm
http://www.sap-img.com/abap/reincarnation-of-reuse-alv-fieldcatalog-merge.htm
http://www.sap-img.com/fu015.htm
http://www.sapgenie.com/abap/code/abap28.htm
http://www.sapdevelopment.co.uk/reporting/alv/alv_variousfcat.htm
Give me ur mail id i will send some documentation.
Do reward if it helps,
Laxmi. -
Hi,
I have a issue in ALV Report for displaying one field's data into output.
I am getting data into all other fields in ALV Report except for this field.
This field & related fields are declared as below: in final internal table.
sta_no TYPE z3status,
status(10) TYPE c,
Here z3status is of type Char(1).
In Report
I have put a condition :
IF i_tab-sta_no EQ 1.
i_tab-status = 'Created'.
ELSE.
i_tab-status = 'Closed'.
ENDIF.
and to field catalog also i am passing right information as for every other field in ALV Report.
Till the point use of REUSE_ALV_LIST_DISPLAY F.M also final internal table is having status field filled.
But in output nothing gets displayed for Status field.
Can anybody tell me what can be the issue!
Thanks in advance.
Thanks,
Deep.Hi,
I have no problem in data fetching into final internal table.
Everything is coming well to REUSE_ALV_DISPLAY F.M.
But still Status field data is not getting displayed.
I have posted some code for reference:
LOOP AT t_z3manboxid INTO wa_z3manboxid.
wa_result-manifest_no = wa_z3manboxid-zmanno.
wa_result-item_no = wa_z3manboxid-item_no.
IF l_item_no NE wa_z3manboxid-item_no.
wa_result-piece_quantity = wa_z3manboxid-vemng.
wa_result-unit = wa_z3manboxid-vemeh.
wa_result-manifester = wa_z3manboxid-usnam.
wa_result-manifest_sta_no = wa_z3manboxid-z3status.
IF wa_result-manifest_sta_no EQ 1.
wa_result-manifest_status = c_created.
ELSEIF wa_result-manifest_sta_no EQ 2.
wa_result-manifest_status = c_in_transit.
ELSEIF wa_result-manifest_sta_no EQ 3.
wa_result-manifest_status = c_arrived.
ELSEIF wa_result-manifest_sta_no EQ 4.
wa_result-manifest_status = c_closed.
ENDIF.
ENDIF.
l_item_no = wa_z3manboxid-item_no.
APPEND wa_result TO t_result.
CLEAR: wa_result, wa_z3manboxid.
ENDLOOP.
Building field catalog following code is added:
For status call is as below:
PERFORM f_build_fieldcat USING c_tab
c_manifest_status
c_space
c_space
c_mannf_status
c_space1
15.
FORM f_build_fieldcat USING p_tabname p_fldname
p_rtabname p_rfldname
p_fldhdg p_check
p_length.
CLEAR t_fieldcat_ln1.
ADD 1 TO g_col_pos.
t_fieldcat_ln1-tabname = p_tabname.
t_fieldcat_ln1-fieldname = p_fldname.
t_fieldcat_ln1-ref_tabname = p_rtabname.
t_fieldcat_ln1-ref_fieldname = p_rfldname.
t_fieldcat_ln1-ddictxt = c_l.
t_fieldcat_ln1-seltext_l = p_fldhdg.
t_fieldcat_ln1-no_zero = space.
t_fieldcat_ln1-do_sum = space.
t_fieldcat_ln1-col_pos = g_col_pos.
t_fieldcat_ln1-no_out = space.
t_fieldcat_ln1-just = c_c.
t_fieldcat_ln1-qfieldname = space.
t_fieldcat_ln1-checkbox = p_check.
t_fieldcat_ln1-input = p_check.
t_fieldcat_ln1-reptext_ddic = p_fldhdg.
IF p_fldname EQ c_manno.
t_fieldcat_ln1-key = c_x.
t_fieldcat_ln1-hotspot = c_x.
ELSE.
t_fieldcat_ln1-key = space.
t_fieldcat_ln1-hotspot = p_check.
ENDIF.
t_fieldcat_ln1-outputlen = p_length.
t_fieldcat_ln1-intlen = p_length.
t_fieldcat_ln1-ddic_outputlen = p_length.
APPEND t_fieldcat_ln1 TO t_fieldcat1.
ENDFORM. " f_build_fieldcat
FORM f_build_sortcat USING p_fldname.
CLEAR t_sortcat_ln1.
ADD 1 TO g_col_pos.
t_sortcat_ln1-spos = g_col_pos.
t_sortcat_ln1-fieldname = p_fldname.
t_sortcat_ln1-up = c_x.
t_sortcat_ln1-down = space.
t_sortcat_ln1-subtot = c_x.
APPEND t_sortcat_ln1 TO t_sortcat1.
ENDFORM. " f_build_sortcat
FORM f_build_layout.
t_layout1-zebra = c_x.
t_layout1-no_vline = c_space1.
t_layout1-reprep = c_x.
t_layout1-detail_popup = c_x.
t_layout1-window_titlebar = text-005.
t_layout1-no_scrolling = c_space1.
t_layout1-detail_titlebar = text-005.
t_layout1-numc_sum = c_x.
t_layout1-get_selinfos = c_x.
t_layout1-min_linesize = 132.
ENDFORM. " f_build_layout
DATA: l_pgm TYPE syrepid,
l_exit(1) TYPE c.
CLEAR: l_pgm,
l_exit.
l_pgm = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = l_pgm
i_callback_user_command = c_user_command
is_layout = t_layout1
it_fieldcat = t_fieldcat1
i_save = c_a
it_events = t_eventcat1
IMPORTING
e_exit_caused_by_caller = l_exit
TABLES
t_outtab = t_result
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc NE 0.
l_exit = l_exit.
ENDIF.
To ALV F.M t_result table is updated with correct data.
But it is not getting displayed.
What can be the reason!
Can anybody give the solution!
Thanks for your replies.
Thanks,
Deep. -
How to give the no of lines per a page in alv report
hi
could u plz inform me
how to give the no of lines per page in alv report
in ordinary report we can give line-count na
how can we give in alvs.
thanx
kals.Hi Kalyan,
There is another Forum(Abap Development) where u can post abap related stuffs and u can also get quick answers there..
Cheers...
Santosh -
Summing up a Column in ALV report
Hi All,
I have developed an ALV Report which will display Invoices and other details.
Now i need to display the sum of NETWR column, if user wish to select that column and click the "SUM" icon.
As of now, if i select the NETWR column and click 'SUM" column, i am getting Runtime error.
How to resolve this issue?
Regards
PavanHi Pavan,
ALV GRID CONTROL:
This task is performed by the SAP Control Framework.
The R/3 System allows you to create custom controls using ABAP Objects. The application server is the Automation Client, which drives the custom controls (automation server) at the front end.
If custom controls are to be included on the frontend, then the SAPGUI acts as a container for them.
Custom controls can be ActiveX Controls or JavaBeans.
The system has to use a Remote Function Call (RFC) to transfer methods for creating and using a control to the front end.
ABAP objects are used to implement the controls in programs.
An SAP Container can contain other controls (for example, SAP ALV Grid Control, Tree Control, SAP Picture Control, SAP Splitter Control, and so on). It administers these controls logically in one collection and provides a physical area for the display.
Every control exists in a container. Since containers are themselves controls, they can be nested within one another. The container becomes the parent of its control. SAP containers are divided into five groups:
SAP custom container: Displays within an area defined in Screen Painter on screens or sub screens.
Class: CL_GUI_CUSTOM_CONTAINER
SAP dialog box container: Displays in a modeless dialog box or as a full screen. Class:
CL_GUI_DIALOGBOX_CONTAINER
SAP docking container: Displays as docked, resizable sub-window with the option of displaying it as a modeless dialog box. Class: CL_GUI_DOCKING_CONTAINER
SAP splitter container: Displays and groups several controls in one area - that is, splits the area into cells Class: CL_GUI_SPLITTER_CONTAINER
SAP easy splitter container: Displays controls in two cells, which the user can resize using a split bar. Class: CL_GUI_EASY_SPLITTER_CONTAINER.
In the control, you can adjust the column width by dragging, or use the 'Optimum width' function to adjust the column width to the data currently displayed. You can also change the column sequence by selecting a column and dragging it to a new position.
Standard functions are available in the control toolbar. The details display displays the fields in the line on which the cursor is positioned in a modal dialog box.
The sort function in the ALV Control is available for as many columns as required. You can set complex sort criteria and sort columns in either ascending or descending order.
You can use the 'Search' function to search for a string (generic search without *) within a selected area by line or column.
You can use the 'Sum' function to create totals for one or more numeric columns. You can then use the "Subtotals" function to set up control level lists: You can use the 'Subtotal' function to structure control level lists: select the columns (non-numeric columns only) that you want to use and the corresponding control level totals are displayed.
For 'Print' and 'Download' the whole list is always processed, not just the sections displayed on the screen.
You can define display variants to meet your own specific requirements. For information on saving variants, see 'Advanced Techniques'.
The ALV grid control is a generic tool for displaying lists in screens. The control offers standard functions such as sorting by any column, adding numeric columns, and fixed lead columns .
Data collection is performed in the program (with SELECT statements, for example) or by using a logical database. The data records are saved in an internal table and passed on to the ALV control along with a field description.
The field description contains information about the characteristics of each column, such as the column header and output length. This information can defined either globally in the Dictionary (structure in the Dictionary) or in the field catalog in the program itself. You can also merge both techniques.
The ALV link is a standard function of Query and QuickViewer. If multiline queries or Quick View lists have been defined, they will automatically be compressed to a single line and output in the ALV control as a long, single line list.
Use Screen Painter to create a sub screen container for the ALV grid control. The control requires an area where it can be displayed in the screen. You have to create a container control that determines this area.
Use the corresponding icon in the Screen Painter layout to create the container control. The size of area "MY_CONTROL_AREA" determines the subsequent size of the ALV control.
The valid GUI status must be set at the PBO event in the flow logic of the ALV subscreen container.
The OK_CODE processing for the cancel functions must be programmed at the PAI event.
The reference variables for the custom container and the ALV grid control must be declared.
To create reference variables, use ABAP statement TYPE REF TO .
The global classes you need to do this are called cl_gui_custom_container (for the custom container control) and cl_gui_alv_grid (for the ALV grid control).
The global classes are defined in the Class Builder. You can use the Class Builder to display information for the methods, their parameters, exceptions, and so on.
Use ABAP statement CREATE OBJECT to create the objects for the container and the ALV control. Objects Are instances of a class.
When an object is created (CREATE), method CONSTRUCTOR of the corresponding class is executed. The parameters of method CONSTRUCTOR determine which parameters have to be supplied with data when the object is created. In the above example, object alv_grid is given the name of the container control (g_custom_container) in exporting parameter i_parent, which links the two controls. For information on which parameters method CONSTRUCTOR possesses and which of these parameters are required, see the Class Builder.
Objects should only be created once during the program. To ensure that this is the case, enclose the CREATE OBJECT statement(s) in an IF IS INITIAL. ... ENDIF clause. The objects must be generated before the control is displayed for the first time - that is, during the PBO event of the ALV subscreen container.
To display the requested dataset in the ALV control, the data must be passed on to the control as an internal table, and a field description must exist indicating the order in which the columns will be output.
In the simplest case, the field description can use a structure from the Dictionary. The Dictionary also determines the technical field attributes like type and length, as well as the semantic attributes like short and long texts. The ALV control uses this information to determine the column widths and headers. The column sequence is determined by the field sequence in the structure.
If no suitable structure is active in the Dictionary, or you want to output internal program fields in the control, then you will have to define information like the output length and column header in the field catalog.
In a typical program run, the dataset is read first (SELECT ....), the internal table is filled with the data to display (... INTO TABLE ...), and ABAP statement CALL SCREEN is then used to call the ALV sub screen container.
The data transfer to the ALV control takes place during the call of method
set_table_for_first_display from class cl_gui_alv_grid. The method call must be programmed at the PBO event of the ALV subscreen container.
The name of the Dictionary structure that supplies the field description is specified in exporting parameter i_structure_name. The name of the internal table that contains the data records to display is specified in changing parameter it_outtab.
The field description for the ALV control can be ta ken from an active Dictionary structure (fully automatic), by passing a field catalog (manual), or through a mixture of the two options (merge).
The field catalog is in internal table with type lvc_t_fcat. This type is defined globally in the Dictionary.
Each line in the field catalog table corresponds to a column in the ALV control.
The field characteristics (= column characteristics) are defined in the field catalog. The field catalog is in internal table with type lvc_t_fcat. Each line that is explicitly described in the ALV control corresponds to a column in the field catalog table.
The link to the data records to output that are saved in internal table is established through field name . This name must be specified in column "fieldname" in the field catalog.
This field can be classified through a Dictionary reference (ref_table and ref_field) or by specifying an ABAP data type (inttype).
Column headers and field names in the detail view of an ALV control line can be determined in the field catalog in coltext and seltext, respectively.
The position of a field during output can be determined with col_pos in the field catalog.
If you want to hide a column, fill field no_out with an "X" in the field catalog. Hidden fields can be displayed again in a user display variant.
Icons can be displayed in the ALV control. If you want a column to be interpreted as an icon, then the icon name must be known to the program (include .) and icon = "X" must be specified for this column in the field catalog.
The above example shows a semi-automatic field description: Part of the field description comes from the Dictionary structure (sflight), while another part is explicitly defined in the field catalog (gt_fieldcat).
The field catalog (internal table) is filled in the program and is passed on together with the name of the Dictionary structure during the method call. The information is merged accordingly in method set_table_for_first_display.
For a user to save display variants, parameters is_variant and i_save must be passed on during method call set_table_for_first_screen. To assign display variants uniquely to a program, at least the program name must be supplied in the transferred structure (gs_variant).
Program names can be up to 30 characters long.
If you only pass on the current parameters for is_variant, then existing variants can be loaded, but no new ones can be saved. If you use parameter i_save, you must pass on a variant structure with is_variant.
I_SAVE = SPACE No variants can be saved.
I_SAVE = 'U' The user can only save user-specific variants.
I_SAVE = 'X' The user can only save general (shared) variants.
I_SAVE = 'A' The user can save both user-specific and general (shared) variants.
You can use parameter is_layout of method set_table_for_first_display, for example, to define the header in the ALV control and the detail display.
To do this, define a query area in the program in accordance with Dictionary structure lvc_s_layo, and pass on the text to display in field -grid_title or -detailtitl.
If you want to create print lists with zebra stripes, set field -zebra to "X". You can display a print preview for print lists by requesting standard function "Print".
All parameters of method SET_TABLE_FOR_FIRST_DISPLAY from global class
CL_GUI_ALV_GRID are defined in the Class Builder.
Events are defined in global class cl_gui_alv_grid; you can use these events to implement user interaction within the program. To respond to a double -click on a table line, you must respond to event DOUBLE_CLICK.
You receive control in the program, allowing you to implement interactive reporting - such as a full screen details list. The events for cl_gui_alv_grid are located in the Class Builder.
To define an implement a local class in the program, you use a handler method. In this handler method, you program the functionality to trigger by a double -click in the output table.
To activate a handler method at runtime, a class or an object from that class registers itself with an event using command SET HANDLER. The names of the IMPORTING parameters in the handler method correspond to the names of the EXPORTING parameters of the related event.
In the above example, the local class is LCL_ILS and the handler method is ON_DBLCLICK. An object - ALV_DBLCLICK - is created and registers itself for event DOUBLE_CLICK.
You can query parameter e_row-index to determine which output line was requested by the double -click. This parameter corresponds to the line number of the output table (internal table with the data records to output). If you need information for the selected line, you have to read it with READ TABLE itab INDEX e_row-index.
This subsequent read in the output table generally corresponds to the HIDE area in conventional reporting. You first have to make sure that the user has double -clicked a line in the output table (similar to the valid line selection with the HIDE technique).
A field group can contain global data objects, but not data objects that have been defined locally in a subroutine or function module.
You can use INSERT to specify both fields and field symbols. This makes it possible to dynamically insert a data object referred to by a field symbol into a field group at runtime. Any field symbols that have not been assigned are ignored, which means no new field is inserted into the field group.
The EXTRACT statement writes all the fields of a field group as one record to a sequential dataset (transport takes place with similarly named fields). If a HEADER field group is defined, then its fields are placed ahead of each record as sort keys. You can then sort the dataset with SORT and process it with LOOP ...ENDLOOP. In this case, no further EXTRACT is possible.
The INSERT statement is not a declarative statement: This means field groups can also be expanded in the program flow section.
As soon as the first dataset of a field group has been extracted with EXTRACT, that field group can no longer be expanded with INSERT. In particular, the HEADER field group cannot be expanded after the first EXTRACT (regardless of the field group).
When the GET events are processed, the logical database automatically writes hexadecimal zeros in all the fields of a node when it returns to an upper-level node in the hierarchy. Since the HEADER normally contains sort fields for all field groups, these hexadecimal zeros in the HEADER serve as a type of hierarchy key: The more zeros there are, the further up in the control level hierarchy you go.
The SORT statement sorts the extract dataset in accordance with the defined field sequence in field group HEADER. The addition BY ... sets a new sort key.
Each must be either a field of field group HEADER or a field group that consists only of fields of the field group HEADER. You can use the additions ASCENDING and DESCENDING to determine whether the fields are sorted in ascending (default) or descending order.
Fields containing X'00' in the logical databases are always displayed before all other values during a SORT.
Processing of an extract dataset always takes places within a LOOP. The contents of the extract dataset field are placed in program fields with the same names.
The group change always involves the fields of the HEADER. Single record processing for extract datasets is performed using language element AT ( = field group).
CNT() is not a statement, but instead a field that is automatically create d and filled when is a non-numeric field from field group HEADER and is part of the sort key. At the end of the group, CNT() contains the number of different values that the field recorded in this group level.
SUM() is not a statement, but instead a field that is automatically created and filled when is a numeric field of an extract dataset. At the end of the group, SUM() contains the control total of field .
*** and CNT are only available at the end of the group level or at AT LAST.
Single record processing for extract datasets AT WITH is only performed when field group is immediately followed by field group in the temporary dataset.
Loops over an extract dataset cannot be nested. However, several contiguous loops are permitted.
The sequence of the control level changes within the LOOP must correspond to the sort sequence.
Totals can only be calculated within control footer processing.
Extracts allow only appends (EXTRACT), sorting (SORT) and sequential processing (LOOP).
Once a SORT or LOOP has occurred, the intermediate dataset is frozen and cannot be expanded with EXTRACT. Operations that insert into or delete from EXTRACT datasets are not supported.
Extracts allow for several record types (FIELD-GROUPS) with fields that can be set dynamically (INSERT is not a declarative statement!). Internal tables have a single, statically-defined line type.
Internal tables use the sequence of table fields according to the declaration for the hierarchy of the control leve l. The control level structure for internal tables is therefore static, and is independent of which criteria were used to sort the internal table.
Extracts do not depend on the field sequence for control level processing: a re-sort or a completely different control level process can take place. The control level structure for extract datasets is therefore dynamic. It corresponds exactly to the sort key of the extract dataset. The sort key is the sequence of fields from the field group HEADER, and is used to sort the extract dataset.
Extracts rely on the compiler to determine which combinations of group levels and a cumulating field the control level totals desire. The desired control level totals are determined by the processing of LOOP ... ENDLOOP blocks. Internal tables build the control level total with the SUM statement.
This procedure leads to high resource depletion for totaling control levels in internal tables.
Regards,
Chandru -
Wrong Display of Japanese Currency in ALV Report
Dear Friends,
I am facing a problem in Displaying a Japanese Currency in the ALV Report Output. I am mentioning the Currency Key field and the Currency field in the Report.
For example, the amount field should be displaying as 22838 instead of 228.38 where this is correct in case of USD but not correct in case of JPY.
Code where the i am appending the fieldcatlog:
ls_fieldcat-fieldname = 'WAERK'.
ls_fieldcat-datatype = 'CUKY'.
ls_fieldcat-outputlen = 8.
ls_fieldcat-seltext_l = Text-088.
ls_fieldcat-seltext_m = Text-088.
ls_fieldcat-seltext_s = Text-088.
ls_fieldcat-reptext_ddic = Text-088.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'BUCK0'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 16.
ls_fieldcat-seltext_l = Text-017.
ls_fieldcat-seltext_m = Text-017.
ls_fieldcat-seltext_s = Text-017.
ls_fieldcat-reptext_ddic = Text-017.
Please do suggest if any inputs on the same.
Thanks in Advance for you reply.
Thanks and Regards,
Saritha KHi,
All the Decimals related to currency fields will be stored in the table tcurx.
You have to get the currency and respective decimals into internal table.
Read the internal the table with key equal to currency.
And calculate the values as below :
loop at gt_output.
READ TABLE gt_tcurx WITH KEY currkey = gt_output-zwaers.
IF sy-subrc EQ 0.
IF gt_tcurx-currdec = '0'.
gt_output-dmbtr = gt_output-dmbtr * 100.
ELSEIF gt_tcurx-currdec = '3'.
gt_output-dmbtr = gt_output-dmbtr / 10.
ENDIF.
ENDIF.
MODIFY gt_output.
endloop. Then pass the gt_output to ALV FM.
In the above code gt_output is my final internal table which i am passing to the ALV FM. And gt_tcurx is the internal table consists of all the currency and their decimals.
Thanks,
Sri. -
Hi all,
I have a Problem with the ALV report felated to FI Data. Where in the Selection screen I have two fields Commitment Item, Fund Center and Fiscal Year. When i am executing the report it is printing correctly.
The Problem is that when i give a commitment which is not related to the Fund Center It is displaying all the records.
That is nothing but it is displaying all the data where the data of the selection screen is not in the internal table.
instead i should display a message that the Commitment item is not related to Fund Center. and the ALV Should not print any values. How do i achieve this?
Please help me in solving the problem. Rewards will be awarded.
Message was edited by:
sravan varanasiHi,
Here is a small ex.
SELECT mtart mtbez FROM t134t
INTO CORRESPONDING FIELDS OF TABLE it_t134t
WHERE mtart IN so_mtart AND spras = 'EN'.
IF sy-subrc = 0.
*********PERFORM display
ELSE.
MESSAGE ID 'Selection error' TYPE 'E' NUMBER '0040'.
ENDIF.
Hope useful.
Regards
Harish. -
Hi Everyone,
We have done ALV report (grid contains 22 columns which belongs to one ztable) in development and we have transported to production system.
and Now we added one more field i.e. not related to ztable that means external field(23rd field to grid) to Field catalog and sent production,
And that extra column which we added is coming in development and also in test system, When we tried to execute it, the extra field is added in the grid and when come out of the selection screen it is getting short dump(we are getting dump error in standard program) and one more main problem is:
The code has been moved but 'extra field is not showing in ALV grid' in production system what would be the problem? and also when we come out of the selection screen it getting short dump as same in development.
Could anyone help me out in this.
Thanks in Advance,
~Teena.The code has been moved but 'extra field is not showing in ALV grid' in production system what would be the problem?<b> -->No one can say any thing until unless we are not sure of ur Code , may be check ur layouts of that program ? are u using any default varints ?</b>
and also when we come out of the selection screen it getting short dump as same in development.--><b>check ST22 , u will get some idea ? or else paste ST22 here so we can get some idea , IN ST222 search for point from where DUMP OCCURS ( means search for arrow mark</b>
Regards
Prabhu -
How to display the header data on different position in alv report
hi all,
how to display the header data on different position in alv report.
for example ,
customer name
xxxx xxxx
vendor name street
xxxx xxxx xxxxx
pls help me .hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks -
Logic needed to print blank line in alv report
hi experts,
can anyone please tell me the logic for this
i want to logic one is
1) in alv report contains
a set of data contains 100 (5 datas)
and a set of data contain 200(5 datas)
i want to have one coloum containing serial no
ex for 100 i want to move no '5' to one coloumn ,but it should display only ones not for all 5 records.
same for 200 also i want to move 7 to this ,it should b displayed ones
i used for at new command alos its not working
2)suppose for particular date, 200 related records is not there
it should conatin blank line,displaying 'NIL'.
SO THE OPT FROMAT MUST BE
MATNR DOCNO
100 1000
100 1000
100 "
100 "
100 "
200 2000
200 "
200 "
200 "
200 "
SUPPOSE 200 RECORD IS NOT THERE THE OPT SHLD B
100 1000
100 1000
200 NILArun,
1)
If you are using the function module REUSE_ALV_GRID_DISPLAY, then use the internal table it_sort with a row for the column where you want the suppression of repeated values.
2)
If you are using the function module REUSE_ALV_GRID_DISPLAY, then simply ensure that your internal table t_outtab has the rows that you need containing 'NIL'.
John -
Hi,
I upload two bmp images in se78. I maintained the image name in zreport. Using select qry i fetch the name and i want to diaplay those images one of the column in my alv report.
Need Source Code for this.
plz assist ,
Thanks.
Edited by: abap.m on May 1, 2010 12:16 PMHai Kanwardeep Singh,
Now i have some image in excel sheet i want to upload those images in r/3.
Because of i'll go to create one alv report to display the images.
For example:
in material master they maintained the machine model number,machine name etc.
Now their req is they need a report
SeqNo Mch_ No Mch_Name Mch_Img
1 100 heat image
2 200 pump image
.(In Mch_Img Column i need a image related to that particular machine how)
Like that i need a report in alv
Edited by: abap.m on May 1, 2010 1:26 PM -
Hi everyone.
I need to develop an ALV report. Select options are -
AFPO-DWERK (plant) (Obligatory)
AFPO-AUFNR (Prd Ord Num) (optional)
AFKO-STLBEZ (Mat Nr) (optional)
S022-ARBPL (Work Center) (optional)
I have extracted all open production orders from AUFK and placed them in an internal table.
Now how can I filter this list to the select options.
Please help me.
Related Tables - AUFK, AFPO, AFKO.
Thanks,
Lakshmijust go to www.alvrobot.com.ar
and the page will generate the code for you.... -
· I have a requirement to prepare alv report to know the Production order details having the status REL (Released), CSER (Error in cost calculation).
someone let me know the tables and the fields that i need to use in this report.
thank you.hi,
check these tables related to pp.
AFKO Order Header
AFPO Order Item Detail
AFFW Confirmations -- Goods Movements with Errors
AFRC Confirmations -- Incorrect Cost Calculations . -
Hi,
Please help me in this.
1) Create the selection screen with the following fields on it.
S_REQUESTOR for ZSWAPHISTORY- REQUESTOR
S_APPROVER for ZSWAPHISTORY- APPROVER providing range
S_to_customer for ZSWAPHISTORY- to_customer providing range
S_from_customer for ZSWAPHISTORY- from_customer providing range
S_MRPC for MARC-DISPO providing range
S_MATNR for MARA-MATNR providing range
S_APPR_DATE for ZSWAPHISTORY- APPR_DATE Default to yesterdays date
S_QUAN for ZSWAPHISTORY-quan
2) Validate the fields entered in the selection screen.
3) Check the user authorizations for this report.
4) Select the entries from the table ZSWAPHISTORY into an internal table based on the input from the selection screen and the value of the field ZSWAPHISTORY -STATUS is APPROVED.
5) Then select the MRP Controller ID (DISPO) from the Table MARC for all entries in the internal table where MARC-MATNR equals to the internal table -material number.
6) Move the field value of MRP Controller ID (DISPO) into the final internal table for the corresponding entries.
7) Declare the Filed Catalogue with the fields that are to be displayed in the ALV
Please help to create this , iam new to this area.
Thanks
AliHi
See the sample code of ALV and do accordingly
Since you are using a Z table it is not clear to create
report ZRGRIRNA no standard page heading
line-count 65
line-size 255
message-id mm.
GR IR Detail Report *
Description : The output has to be displayed
in the ALV Grid format with the Selection *
screen appearing on the output. In The Output *
Subtotals for Vendor, Plant, Period, Material,*
Valuation Class, Purchase Order,Cost Center, *
Cost Element and Receipt Date are displayed *
after sorting the data by same fields. *
Declaration for Tables
tables: t001, " Company Codes
t001w, " Plants/Branches
lfa1, " Vendor Master
ska1, " GL Account Master
mara, " Material Master
mbew, " Material Valuation
ekko, " PO Header Data
cska, " Cost Elements
csks, " Cost Centers
bsis, " GL Accounts: Open Items Data
bkpf. " Accounting Doc: Header Data
Type-pools
Type pools for ALV display
type-pools : slis.
Global variables
data: g_repid like sy-repid,
g_exit type c,
g_events type slis_t_event,
g_list_top_of_page type slis_t_listheader,
g_exit_caused_by_caller,
g_exit_caused_by_user type slis_exit_by_user,
g_top_of_page type slis_formname value 'TOP_OF_PAGE',
g_variant like disvariant,
g_save.
Declaration for Constants
constants : c_x type c value 'X', " Flag
c_c type c value 'C', " Flag
c_l type c value 'L', " Flag
c_a type c value 'A', " Line Type
c_h type c value 'H', " Dr/Cr
c_s type c value 'S', " Line Type
c_mkpf(4) type c value 'MKPF'. " Table
Declaration of Internal Tables
Internal Table for BSIS Table data
data: begin of i_bsis occurs 0,
bukrs like bsis-bukrs, " Company Code
hkont like bsis-hkont, " GR IR Account
gjahr like bsis-gjahr, " Fiscal Year
belnr like bsis-belnr, " Acc Document
buzei like bsis-buzei, " Item No
budat like bsis-budat, " Receipt Date(Posting)
monat like bsis-monat, " Period
end of i_bsis.
Internal Table for BSEG Table data
data: begin of i_bseg occurs 0,
bukrs like bsis-bukrs, " Company Code
belnr like bsis-belnr, " Acc Document
buzei like bsis-buzei, " Item No
gjahr like bsis-gjahr, " Fiscal Year
shkzg like bseg-shkzg, " Dr/Cr Indicator
lifnr like bseg-lifnr, " Vendor Code
matnr like bseg-matnr, " Material No
ebeln like bseg-ebeln, " Purchase Order
ebelp like bseg-ebelp, " PO Item
werks like bseg-werks, " Plant
menge like bseg-menge, " PO Quantity
meins like bseg-meins, " UOM
dmbtr like bseg-dmbtr, " Amount in Local Currency
wrbtr like bseg-wrbtr, " Amount in Trans.Currency
end of i_bseg.
Internal Table for BKPF Table data
data: begin of i_bkpf occurs 0,
bukrs like bkpf-bukrs, " Company Code
belnr like bkpf-belnr, " Acc Document
gjahr like bkpf-gjahr, " Fiscal Year
waers like bkpf-waers, " Trans. Currency
awkey like bkpf-awkey, " Object Key
awtyp like bkpf-awtyp, " Reference Procedure
end of i_bkpf.
Internal Table for MSEG Table data
data: begin of i_mseg occurs 0,
mblnr like mseg-mblnr, " Material Document
mjahr like mseg-mjahr, " Fiscal Year
bwart like mseg-bwart, " Movement Type
matnr like mseg-matnr, " Material No
menge like mseg-menge, " PO Quantity
meins like mseg-meins, " UOM
end of i_mseg.
Internal Table for MBEW Table data
data: begin of i_mbew occurs 0,
matnr like mbew-matnr, " Material No
werks like mbew-bwkey, " Plant
bklas like mbew-bklas, " Valuation Class
end of i_mbew.
Internal Table for EKPO Table data
data: begin of i_ekpo occurs 0,
ebeln like ekpo-ebeln, " Purchase Order
ebelp like ekpo-ebelp, " PO Item
matnr like ekpo-matnr, " Material No
txz01 like ekpo-txz01, " Material Text
end of i_ekpo.
Internal Table for EKKN Table data
data: begin of i_ekkn occurs 0,
ebeln like ekkn-ebeln, " Purchase Order
ebelp like ekkn-ebelp, " PO Item
kostl like ekkn-kostl, " Cost Center
sakto like ekkn-sakto, " Cost Element
end of i_ekkn.
Internal Table for LFA1 Table data
data: begin of i_lfa1 occurs 0,
lifnr like lfa1-lifnr, " Vendor
name1 like lfa1-name1, " Name
end of i_lfa1.
Declaration of Output Internal Table
data: begin of i_final occurs 0,
lifnr like lfa1-lifnr, " Vendor
werks like bseg-werks, " Plant
monat like bsis-monat, " Period
matnr like mara-matnr, " Material Number
bklas like mbew-bklas, " Val Class
ebeln like bseg-ebeln, " PO
kostl like ekkn-kostl, " Cost Center
sakto like ekkn-sakto, " Cost Element
budat like bsis-budat, " Rec. Date
name1 like lfa1-name1, " Vendor Name
belnr like bsis-belnr, " FI Document
bwart like mseg-bwart, " Movement Type
txz01 like ekpo-txz01, " Material Text
menge like bseg-menge, " Quantity
meins like bseg-meins, " UOM
dmbtr like bseg-dmbtr, " Local Amount
wrbtr like bseg-wrbtr, " Tran.Amount
waers like bkpf-waers, " Tran.Currency
status type c, " Material Status
end of i_final.
Internal table to hold field catgory data
data: i_fldcat type slis_t_fieldcat_alv. " Table - field catgory
Internal table to hold Sort/Subtotals criteria data
data: i_sort type slis_t_sortinfo_alv. " Table - sort/Subtotals
Structure
data: x_layout type slis_layout_alv, " Structure-layout
x_fldcat like line of i_fldcat, " Structure-field catagory
x_sort like line of i_sort. " Structure-Sort/Subtotals
Selection screen
selection-screen : begin of block b1 with frame title text-000.
parameters:
p_bukrs like t001-bukrs obligatory, " Company Code
p_grira like ska1-saknr default '0241101000' obligatory. " Account
select-options:
s_budat for bkpf-budat, " Posting Date
s_werks for t001w-werks, " Plant
s_lifnr for lfa1-lifnr, " Vendor
s_matnr for mara-matnr, " Material Number
s_kostl for csks-kostl, " Cost Center
s_kstar for cska-kstar, " Cost Element
s_ebeln for ekko-ebeln, " Purchase Order
s_monat for bsis-monat. " Period
selection-screen skip.
parameters:
p_incmt as checkbox default 'X',
p_incnm as checkbox default 'X'.
selection-screen end of block b1.
Initialization
initialization.
g_repid = sy-repid.
perform layout_init using x_layout.
perform eventtab_build using g_events[].
g_variant-report = g_repid.
g_save = 'A'.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Read Data from Database Tables
perform read_data.
End of selection
end-of-selection.
Build layout report layout.
perform populate_layout_stucture.
Perform build_field_catalog and Sort Table
perform build_field_catalog.
perform build_sort_totals.
List Header for Top-Of-Page
perform comment_build using g_list_top_of_page[].
Call list viewer function module
perform call_list_viewer .
****************Form - Routines**************************************
Form : layout_init
Description : Form to Build layout for list display
form layout_init using rs_layout type slis_layout_alv.
rs_layout-detail_popup = c_x.
endform.
Form : Eventtab_build
Description : Registration of events to happen during list display
form eventtab_build using rt_events type slis_t_event.
Registration of events to happen during list display
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = rt_events.
read table rt_events with key name = slis_ev_top_of_page
into ls_event.
if sy-subrc = 0.
move g_top_of_page to ls_event-form.
append ls_event to rt_events.
endif.
endform. "eventtab_build
Form : top_of_page
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
I_LOGO = 'ENJOYSAP_LOGO'
it_list_commentary = g_list_top_of_page.
endform.
Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Company Code
clear t001.
if not p_bukrs is initial.
select single bukrs
into t001-bukrs
from t001
where bukrs eq p_bukrs.
if sy-subrc <> 0.
message e899 with 'Enter Valid Company Code'(012).
endif.
endif.
Validation of GL Account (GR/IR)
clear ska1.
if not p_grira is initial.
select saknr
into ska1-saknr
from ska1
up to 1 rows
where saknr eq p_grira.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid GR/IR Account'(013).
endif.
endif.
Validation of Vendor Code
clear lfa1.
if not s_lifnr[] is initial.
select single lifnr
into lfa1-lifnr
from lfa1
where lifnr in s_lifnr.
if sy-subrc <> 0.
message e899 with 'Enter Valid Vendor'(001).
endif.
endif.
Validation of Plant Code
clear t001w.
if not s_werks[] is initial.
select single werks
into t001w-werks
from t001w
where werks in s_werks.
if sy-subrc <> 0.
message e899 with 'Enter Valid Plant'(014).
endif.
endif.
Validation of Material Code
clear mara.
if not s_matnr[] is initial.
select single matnr
into mara-matnr
from mara
where matnr in s_matnr.
if sy-subrc <> 0.
message e899 with 'Enter Valid Material'(015).
endif.
endif.
Validation of Purchase Order
clear ekko.
if not s_ebeln[] is initial.
select single ebeln
into ekko-ebeln
from ekko
where ebeln in s_ebeln.
if sy-subrc <> 0.
message e899 with 'Enter Valid Purchase Order'(016).
endif.
endif.
Validation of Cost Center
clear csks.
if not s_kostl[] is initial.
select kostl
into csks-kostl
from csks
up to 1 rows
where kostl in s_kostl.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Cost Center'(017).
endif.
endif.
Validation of Cost Element
clear cska.
if not s_kstar[] is initial.
select kstar
into cska-kstar
from cska
up to 1 rows
where kstar in s_kstar.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Cost Element'(018).
endif.
endif.
endform. "validate_screen
*& Form read_data
Read the Data from the database Tables
form read_data.
Get the Accounting Documents for the GR/IR Account Entered on
Selection Screen
clear i_bsis.
refresh i_bsis.
select bukrs " Company Code
hkont " GR IR Account
gjahr " Fiscal Year
belnr " Acc Document
buzei " Item No
budat " Receipt Date(Posting)
monat " Period
into table i_bsis
from bsis
where bukrs = p_bukrs
and hkont = p_grira
and budat in s_budat
and monat in s_monat .
if sy-subrc <> 0.
message i899 with 'No data found'(043).
g_exit = c_x.
stop.
endif.
sort i_bsis by bukrs hkont gjahr belnr buzei.
Get the Vendor,PO,Material,Qty details from BSEG Table
if not i_bsis[] is initial.
clear i_bseg.
refresh i_bseg.
select bukrs " Company Code
belnr " Acc Document
buzei " Item No
gjahr " Fiscal Year
shkzg " Dr/Cr Indicator
lifnr " Vendor Code
matnr " Material No
ebeln " Purchase Order
ebelp " PO Item
werks " Plant
menge " PO Quantity
meins " UOM
dmbtr " Amount in Local Currency
wrbtr " Amount in Trans.Currency
into table i_bseg
from bseg
for all entries in i_bsis
where bukrs = p_bukrs
and belnr = i_bsis-belnr
and gjahr = i_bsis-gjahr
and buzei = i_bsis-buzei
and lifnr in s_lifnr
and werks in s_werks
and matnr in s_matnr
and ebeln in s_ebeln.
sort i_bseg by bukrs belnr buzei gjahr.
Select the Trans.Currency from BKPF Table
clear i_bkpf.
refresh i_bkpf.
select bukrs " Company Code
belnr " Acc Document
gjahr " Fiscal Year
waers " Trans. Currency
awkey " Object Key
awtyp " Reference Procedure
into table i_bkpf
from bkpf
for all entries in i_bsis
where bukrs = p_bukrs
and belnr = i_bsis-belnr
and gjahr = i_bsis-gjahr.
endif.
sort i_bkpf by bukrs belnr gjahr.
Get the Quantity and UOM of Material from MSEG Table
if not i_bkpf[] is initial.
clear i_mseg.
refresh i_mseg.
select mblnr " Material Document
mjahr " Fiscal Year
bwart " Movement Type
matnr " Material No
menge " PO Quantity
meins " UOM
into table i_mseg
from mseg
for all entries in i_bkpf
where mblnr = i_bkpf-awkey(10).
endif.
sort i_mseg by mblnr mjahr.
Get the Material And Description from EKPO Table
if not i_bseg[] is initial.
clear i_ekpo.
refresh i_ekpo.
select ebeln " Purchase Order
ebelp " PO Item
matnr " Material No
txz01 " Material Text
into table i_ekpo
from ekpo
for all entries in i_bseg
where ebeln = i_bseg-ebeln
and ebelp = i_bseg-ebelp.
sort i_ekpo by ebeln ebelp.
Get the Valuation Class from MBEW Table
clear i_mbew.
refresh i_mbew.
select matnr " Material No
bwkey " Plant
bklas " Valuation Class
into table i_mbew
from mbew
for all entries in i_bseg
where matnr = i_bseg-matnr
and bwkey = i_bseg-werks.
sort i_mbew by matnr werks.
Get the Cost Center and Cost Element of the PO from EKKN Table
clear i_ekkn.
refresh i_ekkn.
select ebeln " Purchase Order
ebelp " PO Item
kostl " Cost Center
sakto " Cost Element
into table i_ekkn
from ekkn
for all entries in i_bseg
where ebeln = i_bseg-ebeln
and ebelp = i_bseg-ebelp
and kostl in s_kostl
and sakto in s_kstar.
sort i_ekkn by ebeln ebelp.
Get the Vendor Name
clear i_lfa1.
refresh i_lfa1.
select lifnr " Vendor
name1 " Name
into table i_lfa1
from lfa1
for all entries in i_bseg
where lifnr = i_bseg-lifnr.
endif.
sort i_lfa1 by lifnr.
Move the data to Final Output Internal Table
loop at i_bsis.
i_final-belnr = i_bsis-belnr. " FI Document
i_final-monat = i_bsis-monat. " Period
i_final-budat = i_bsis-budat. " Rec. Date
Read the Transaction Currency from BKPF Internal Table
read table i_bkpf with key bukrs = i_bsis-bukrs
belnr = i_bsis-belnr
gjahr = i_bsis-gjahr
binary search.
if sy-subrc = 0.
i_final-waers = i_bkpf-waers. " Tran.Currency
Read the Movement Type for all Material Related
Documents from MSEG Internal Table
if i_bkpf-awtyp = c_mkpf.
read table i_mseg with key mblnr = i_bkpf-awkey(10)
mjahr = i_bkpf-awkey+10(4).
if sy-subrc = 0.
i_final-bwart = i_mseg-bwart. " Movement Type
endif.
endif.
endif.
Read Vendor, Plant, PO Document, Local And Trans.Amounts
from BSEG Internal Table
read table i_bseg with key bukrs = i_bsis-bukrs
belnr = i_bsis-belnr
gjahr = i_bsis-gjahr
buzei = i_bsis-buzei
binary search.
if sy-subrc = 0.
i_final-lifnr = i_bseg-lifnr. " Vendor
i_final-werks = i_bseg-werks. " Plant
i_final-ebeln = i_bseg-ebeln. " PO
i_final-dmbtr = i_bseg-dmbtr. " Local Amount
i_final-wrbtr = i_bseg-wrbtr. " Tran.Amount
i_final-menge = i_bseg-menge. " Quantity
i_final-meins = i_bseg-meins. " UOM
For Credit Indicator(SHKZG = H) amounts should be (-)ve
if i_bseg-shkzg = c_h.
i_final-dmbtr = i_final-dmbtr * -1.
i_final-wrbtr = i_final-wrbtr * -1.
i_final-menge = i_final-menge * -1.
endif.
Read the Material and its Description from EKPO Internal Table
read table i_ekpo with key ebeln = i_bseg-ebeln
ebelp = i_bseg-ebelp
matnr = i_bseg-matnr
binary search.
if sy-subrc = 0.
i_final-matnr = i_ekpo-matnr. " Material Number
i_final-txz01 = i_ekpo-txz01. " Material Text
Populate the Material Status depending on the Input Checkbox
On Selection Screen
if not i_ekpo-matnr is initial.
i_final-status = c_x.
endif.
endif.
Read the PO related Cost Element and Cost Centers
from EKKN Internal Table
read table i_ekkn with key ebeln = i_bseg-ebeln
ebelp = i_bseg-ebelp
binary search.
if sy-subrc = 0.
i_final-kostl = i_ekkn-kostl. " Cost Center
i_final-sakto = i_ekkn-sakto. " Cost Element
endif.
Read the Valuation Class from MBEW Internal Table
read table i_mbew with key matnr = i_bseg-matnr
werks = i_bseg-werks
binary search.
if sy-subrc = 0.
i_final-bklas = i_mbew-bklas. " Val Class
endif.
Read the Vendor Name from LFA1 Internal Table
read table i_lfa1 with key lifnr = i_bseg-lifnr
binary search.
if sy-subrc = 0.
i_final-name1 = i_lfa1-name1. " Vendor Name
endif.
endif.
append i_final.
clear i_final.
endloop.
sort i_final by lifnr werks monat matnr.
Depending on the check Box Selected display the data
if p_incmt = c_x and p_incnm ne c_x.
delete i_final where matnr eq space.
elseif p_incnm = c_x and p_incmt ne c_x.
delete i_final where matnr ne space.
endif.
endform. "Read Data
Form : populate_layout_stucture
Description : Populating the layout structure
form populate_layout_stucture.
clear x_layout .
Layout properties
x_layout-zebra = c_x.
x_layout-detail_popup = c_x.
x_layout-detail_initial_lines = c_x.
x_layout-colwidth_optimize = c_x.
endform. " populate_layout_stucture
Form : build_field_catalog
Description : Building the field catalog data
form build_field_catalog.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = g_repid
i_internal_tabname = 'I_FINAL'
i_inclname = g_repid
changing
ct_fieldcat = i_fldcat
exceptions
inconsistent_interface = 1
program_error = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Getting the Header text for the coloums
loop at i_fldcat into x_fldcat where fieldname = 'LIFNR' or
fieldname = 'NAME1' or
fieldname = 'WERKS' or
fieldname = 'MONAT' or
fieldname = 'MATNR' or
fieldname = 'BKLAS' or
fieldname = 'EBELN' or
fieldname = 'KOSTL' or
fieldname = 'SAKTO' or
fieldname = 'BUDAT' or
fieldname = 'BELNR' or
fieldname = 'BWART' or
fieldname = 'TXZ01' or
fieldname = 'MENGE' or
fieldname = 'MEINS' or
fieldname = 'DMBTR' or
fieldname = 'WRBTR' or
fieldname = 'WAERS' or
fieldname = 'STATUS'.
if x_fldcat-fieldname = 'LIFNR'.
x_fldcat-seltext_l = 'Vendor'(003).
x_fldcat-seltext_m = 'Vendor'(003).
x_fldcat-seltext_s = 'Vendor'(003).
x_fldcat-reptext_ddic = 'Vendor'(003).
x_fldcat-inttype = c_c.
endif.
if x_fldcat-fieldname = 'NAME1'.
x_fldcat-seltext_l = 'Vendor Name'(002).
x_fldcat-seltext_m = 'Vendor Name'(002).
x_fldcat-seltext_s = 'Vendor Name'(002).
x_fldcat-reptext_ddic = 'Vendor Name'(002).
x_fldcat-inttype = c_c.
endif.
if x_fldcat-fieldname = 'WERKS'.
x_fldcat-seltext_l = 'Plant'(010).
x_fldcat-seltext_m = 'Plant'(010).
x_fldcat-seltext_s = 'Plant'(010).
x_fldcat-reptext_ddic = 'Plant'(010).
x_fldcat-ddictxt = c_l.
endif.
if x_fldcat-fieldname = 'MONAT'.
x_fldcat-seltext_l = 'Period'(011).
x_fldcat-seltext_m = 'Period'(011).
x_fldcat-seltext_s = 'Period'(011).
x_fldcat-reptext_ddic = 'Period'(011).
x_fldcat-ddictxt = c_l.
endif.
if x_fldcat-fieldname = 'MATNR'.
x_fldcat-seltext_l = 'Material'(004).
x_fldcat-seltext_m = 'Material'(004).
x_fldcat-seltext_s = 'Material'(004).
x_fldcat-reptext_ddic = 'Material'(004).
x_fldcat-ddictxt = c_l.
endif.
if x_fldcat-fieldname = 'BKLAS'.
x_fldcat-seltext_l = 'Valuation Class'(009).
x_fldcat-seltext_m = 'Valuation Class'(009).
x_fldcat-seltext_s = 'Valuation Class'(009).
x_fldcat-reptext_ddic = 'Valuation Class'(009).
x_fldcat-ddictxt = c_l.
endif.
if x_fldcat-fieldname = 'EBELN'.
x_fldcat-seltext_l = 'Purchase Order'(005).
x_fldcat-seltext_m = 'Purchase Order'(005).
x_fldcat-seltext_s = 'Purchase Order'(005).
x_fldcat-reptext_ddic = 'Purchase Order'(005).
x_fldcat-ddictxt = c_l.
endif.
if x_fldcat-fieldname = 'KOSTL'.
x_fldcat-seltext_l = 'Cost Center'(006).
x_fldcat-seltext_m = 'Cost Center'(006).
x_fldcat-seltext_s = 'Cost Center'(006).
x_fldcat-reptext_ddic = 'Cost Center'(006).
x_fldcat-ddictxt = c_l.
endif.
if x_fldcat-fieldname = 'SAKTO'.
x_fldcat-seltext_l = 'Cost Element'(007).
x_fldcat-seltext_m = 'Cost Element'(007).
x_fldcat-seltext_s = 'Cost Element'(007).
x_fldcat-reptext_ddic = 'Cost Element'(007).
x_fldcat-ddictxt = c_l.
endif.
if x_fldcat-fieldname = 'BUDAT'.
x_fldcat-seltext_l = 'Receipt Date'(008).
x_fldcat-seltext_m = 'Receipt Date'(008).
x_fldcat-seltext_s = 'Receipt Date'(008).
x_fldcat-reptext_ddic = 'Receipt Date'(008).
x_fldcat-ddictxt = c_l.
endif.
if x_fldcat-fieldname = 'BELNR'.
x_fldcat-seltext_l = 'Acc.Document'(100).
x_fldcat-seltext_m = 'Acc.Document'(100).
x_fldcat-seltext_s = 'Acc.Document'(100).
x_fldcat-reptext_ddic = 'Acc.Document'(100).
x_fldcat-ddictxt = c_l.
endif.
if x_fldcat-fieldname = 'BWART'.
x_fldcat-seltext_l = 'Movement Type'(101).
x_fldcat-seltext_m = 'Movement Type'(101).
x_fldcat-seltext_s = 'Movement Type'(101).
x_fldcat-reptext_ddic = 'Movement Type'(101).
x_fldcat-ddictxt = c_l.
endif.
if x_fldcat-fieldname = 'TXZ01'.
x_fldcat-seltext_l = 'Material Text'(102).
x_fldcat-seltext_m = 'Material Text'(102).
x_fldcat-seltext_s = 'Material Text'(102).
x_fldcat-reptext_ddic = 'Material Text'(102).
x_fldcat-ddictxt = c_l.
endif.
if x_fldcat-fieldname = 'MENGE'.
x_fldcat-seltext_l = 'Quantity'(103).
x_fldcat-seltext_m = 'Quantity'(103).
x_fldcat-seltext_s = 'Quantity'(103).
x_fldcat-reptext_ddic = 'Quantity'(103).
x_fldcat-ddictxt = c_l.
x_fldcat-do_sum = c_x.
endif.
if x_fldcat-fieldname = 'MEINS'.
x_fldcat-seltext_l = 'UOM'(104).
x_fldcat-seltext_m = 'UOM'(104).
x_fldcat-seltext_s = 'UOM'(104).
x_fldcat-reptext_ddic = 'UOM'(104).
x_fldcat-ddictxt = c_l.
endif.
if x_fldcat-fieldname = 'DMBTR'.
x_fldcat-seltext_l = 'Amount in Local Curr'(105).
x_fldcat-seltext_m = 'Amount in Local Curr'(105).
x_fldcat-seltext_s = 'Amount in Local Curr'(105).
x_fldcat-reptext_ddic = 'Amount in Local Curr'(105).
x_fldcat-ddictxt = c_l.
x_fldcat-do_sum = c_x.
endif.
if x_fldcat-fieldname = 'WRBTR'.
x_fldcat-seltext_l = 'Amount in Trans.Curr'(106).
x_fldcat-seltext_m = 'Amount in Trans.Curr'(106).
x_fldcat-seltext_s = 'Amount in Trans.Curr'(106).
x_fldcat-reptext_ddic = 'Amount in Trans.Curr'(106).
x_fldcat-ddictxt = c_l.
x_fldcat-do_sum = c_x.
endif.
if x_fldcat-fieldname = 'WAERS'.
x_fldcat-seltext_l = 'Trans.Currency'(107).
x_fldcat-seltext_m = 'Trans.Currency'(107).
x_fldcat-seltext_s = 'Trans.Currency'(107).
x_fldcat-reptext_ddic = 'Trans.Currency'(107).
x_fldcat-ddictxt = c_l.
endif.
if x_fldcat-fieldname = 'STATUS'.
x_fldcat-seltext_l = 'Material Status'(019).
x_fldcat-seltext_m = 'Material Status'(019).
x_fldcat-seltext_s = 'Material Status'(019).
x_fldcat-reptext_ddic = 'Material Status'(019).
x_fldcat-ddictxt = c_l.
endif.
modify i_fldcat from x_fldcat index sy-tabix.
endloop.
endform. " build_field_catalog
Form : build_sort_totals
Description : Building the Criteria for Sort/Subtotals
form build_sort_totals.
x_sort-fieldname = 'LIFNR'.
x_sort-tabname = 'I_FINAL'.
x_sort-spos = 1.
x_sort-up = c_x.
x_sort-subtot = c_x.
append x_sort to i_sort.
clear x_sort.
x_sort-fieldname = 'WERKS'.
x_sort-tabname = 'I_FINAL'.
x_sort-spos = 2.
x_sort-up = c_x.
x_sort-subtot = c_x.
append x_sort to i_sort.
clear x_sort.
x_sort-fieldname = 'MONAT'.
x_sort-tabname = 'I_FINAL'.
x_sort-spos = 3.
x_sort-up = c_x.
x_sort-subtot = c_x.
append x_sort to i_sort.
clear x_sort.
x_sort-fieldname = 'MATNR'.
x_sort-tabname = 'I_FINAL'.
x_sort-spos = 4.
x_sort-up = c_x.
x_sort-subtot = c_x.
append x_sort to i_sort.
clear x_sort.
x_sort-fieldname = 'BKLAS'.
x_sort-tabname = 'I_FINAL'.
x_sort-spos = 5.
x_sort-up = c_x.
x_sort-subtot = c_x.
append x_sort to i_sort.
clear x_sort.
x_sort-fieldname = 'EBELN'.
x_sort-tabname = 'I_FINAL'.
x_sort-spos = 6.
x_sort-up = c_x.
x_sort-subtot = c_x.
append x_sort to i_sort.
clear x_sort.
x_sort-fieldname = 'KOSTL'.
x_sort-tabname = 'I_FINAL'.
x_sort-spos = 7.
x_sort-up = c_x.
x_sort-subtot = c_x.
append x_sort to i_sort.
clear x_sort.
x_sort-fieldname = 'SAKTO'.
x_sort-tabname = 'I_FINAL'.
x_sort-spos = 8.
x_sort-up = c_x.
x_sort-subtot = c_x.
append x_sort to i_sort.
clear x_sort.
x_sort-fieldname = 'BUDAT'.
x_sort-tabname = 'I_FINAL'.
x_sort-spos = 9.
x_sort-up = c_x.
x_sort-subtot = c_x.
append x_sort to i_sort.
clear x_sort.
endform. " build_sort_totals
Form : comment_build
Description : This form is used to display the Report Header(ALV)
form comment_build using lt_top_of_page type
slis_t_listheader.
data: l_line type slis_listheader,
l_heading1 like rs38m-repti,
l_date(10), l_time(8).
clear l_line.
l_heading1 = 'GR/IR DETAIL REPORT'(021).
g_repid = sy-repid.
write sy-uzeit to l_time.
write sy-datum to l_date.
l_line-typ = c_h.
move l_heading1 to l_line-info.
append l_line to lt_top_of_page.
clear l_line.
l_line-typ = c_s.
concatenate 'System:'(023) sy-sysid
'Date:'(024) l_date
' Time:'(025)
l_time into l_line-info.
append l_line to lt_top_of_page.
concatenate 'Report:'(026) g_repid
' User:'(027) sy-uname into
l_line-info.
append l_line to lt_top_of_page.
l_line-typ = c_a.
move 'SELECTION CRITERIA:'(028) to l_line-info.
append l_line to lt_top_of_page.
concatenate ' Company Code : '(029)
p_bukrs into l_line-info.
append l_line to lt_top_of_page.
concatenate ' GR/IR Account: '(030)
p_grira into l_line-info.
append l_line to lt_top_of_page.
concatenate ' Posting Date : '(032) s_budat-low
' To: '(031) s_budat-high into l_line-info.
append l_line to lt_top_of_page.
concatenate ' Plant : '(033) s_werks-low
' To: '(031) s_werks-high into l_line-info.
append l_line to lt_top_of_page.
concatenate ' Vendor: '(034) s_lifnr-low
' To: '(031) s_lifnr-high into l_line-info.
append l_line to lt_top_of_page.
concatenate ' Material: '(035) s_matnr-low
' To: '(031) s_matnr-high into l_line-info.
append l_line to lt_top_of_page.
concatenate ' Cost Center : '(036) s_kostl-low
' To: '(031) s_kostl-high into l_line-info.
append l_line to lt_top_of_page.
concatenate ' Cost Element: '(037) s_kstar-low
' To: '(031) s_kstar-high into l_line-info.
append l_line to lt_top_of_page.
concatenate ' Purchase Order: '(038) s_ebeln-low
' To: '(031) s_ebeln-high into l_line-info.
append l_line to lt_top_of_page.
concatenate ' Period : '(039) s_monat-low
' To: '(031) s_monat-high into l_line-info.
append l_line to lt_top_of_page.
concatenate ' Include Material Items: '(040)
p_incmt into l_line-info.
append l_line to lt_top_of_page.
concatenate ' Include Non-Material Items: '(041)
p_incnm into l_line-info.
append l_line to lt_top_of_page.
endform.
Form : call_list_viewer
Description : This form is used to display the grid through ALV
form call_list_viewer.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = g_repid
is_layout = x_layout
it_fieldcat = i_fldcat[]
i_default = c_x
it_sort = i_sort[]
i_save = g_save
is_variant = g_variant
it_events = g_events[]
importing
e_exit_caused_by_caller = g_exit_caused_by_caller
es_exit_caused_by_user = g_exit_caused_by_user
tables
t_outtab = i_final
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
write: / 'Problem in calling the ALV report'(042).
endif.
endform. " call_list_viewer
Regards
Anji
Maybe you are looking for
-
Adding key figures using commands in Web Application Designer?
Hello, all. I have a query the contains several key figures. From that query, I created a query view in which only one of the key figures is displayed. I'm using this query view for one of the data providers in a web template. In Web Applicaiton D
-
Network Password not accepted, works on other computers
We have an Airport extreme (looks like a UFO). Everything worked fine last night, but this morning our MacBook Pro cannot join the network because the password times out - Have rebooted both computes and Airport, no success. Other computers in the ho
-
Indesign Server CS5 Multiple instance - Urgent, Please help!
Hi, I am using a windows service to access the indesign server. The instance is created like below. Dim oType As Type = Type.GetTypeFromProgID("InDesignServer.Application") If oType IsNot Nothing Then Return Activator
-
I've tried restarting the IMAPI cd burning service, different playlists, and blank cds. I'm frustrated. Can anyone help? I'm running Windows XP.
-
Hi all, I'm just filling a Numbers table from a webseite per copy & paste. Can I swap columns and rows in Numbers like in Quantrix? Axel