Relationship between APD, TPM, FI, sales and BW

Hi,
Could someone explain me the correct integration points between BW, TPM, APD, FI and sales?
Appreciate the immediate responses !!
Thank you in advance.
Treeza

Hi Treeza
TPM is part of the CRM marketing module.
Concerning BW-BPS it leverages some planning layout that are then saved into BW for further reporting.
TPM is integrated with R3 because it's basically a pricing engine. Being also integrated with CO-PA (WBS Elements) it's also integrated with FI-CO module.
It's moreover integrated with APO since through TPM better demand planning processes can be enabled.
That's it
Byez

Similar Messages

  • Relationship Between ECC Customers (Contact Persons) and CRM BP

    Hello,
    I am new to middleware and need some help with the relationship between ECC customers/contact persons and CRM business partners.
    We are transferring via bdoc this information from ECC to CRM.
    Which bdoc types are used when transferring customers/contact persons? I believe it is BUPA_MAIN but am not too sure. How is the relationship between customer its contact person transferred? Is this done through BUPA_REL? I looked at the segment fields in SBDM but am not too sure how to understand the relationship...
    Thanks for the help!
    Regards,
    Tiffanie

    Thanks! With the initial load, how do I check what fields are being passed in the bdocs?
    I tried to look for customer_main, customer_rel in SBDM  and couldn't find it. Instead I used BUPA_MAIN and found some segments but couldn't find all the data that was being transferred (e.g. customer name, address, etc...) Where do I find all the fields contained in the bdoc?
    I see them in SMW01 when I view the bdoc contents but can not find the actual structure (data fields) that are being brought in from ECC.
    Thanks!
    Tiffanie

  • Diff between R/3 Internet sales and CRM  Internet sales

    Hi every body!
    Could any body tell the basic Diff between R/3 Internet sales and CRM  Internet sales.
    Thank you,
    mark..

    Hi Markiv
    Just to round that off, the ERP version lacks:
    - Rule based ATP (with APO)
    - Customer specific product numbers
    - Web based catalog management
    - Support for further e-Service processes
    Cheers
    Dom

  • Re: What is the relationship between the JTA Server Timeout and

    Two things. The transaction timeout is set when the transaction starts. When are you setting the timeout, and where are you starting the transaction?
              There is a bug in 6.0 SP1. The EJB subsystem always sets the transaction timeout. If you don't specify anything in your descriptor. It sets the timeout to 30 seconds. However, if you
              change the JTA default to 60 seconds, the EJB container won't see this change. This is fixed in our next minor release.
              -- Rob
              Tom Gerber wrote:
              > What is the relationship between the JTA Server Timeout and an EJB's <transcation-timeout-seconds> parameter?
              >
              > Does the EJB's timeout have to be >= the servers to take effect?
              >
              > We tried setting the timeout in the XML file to 60 seconds but the transaction still timed out after 30 seconds or so which makes me believe the server timeout overrides the EJB's timeout.
              >
              > Is this correct behavior?
              >
              > We are on WL 6.0 sp1
              >
              > Thanks
              >
              > Tom
              

    Sorry, you cannot query for known bugs yet.
              Work is in progress :)
              Kumar
              Tom Gerber wrote:
              > Is there a place on the WebSupport site for WebLogic that I can query
              > for know issues for WL 6 sp1?
              >
              > I tried the Find Solutions but didn't find much.
              >
              > Thanks
              >
              > Rob Woollen wrote:
              >
              > > Two things. The transaction timeout is set when the transaction starts. When are you setting the timeout, and where are you starting the transaction?
              > >
              > > There is a bug in 6.0 SP1. The EJB subsystem always sets the transaction timeout. If you don't specify anything in your descriptor. It sets the timeout to 30 seconds. However, if you
              > > change the JTA default to 60 seconds, the EJB container won't see this change. This is fixed in our next minor release.
              > >
              > > -- Rob
              > >
              > > Tom Gerber wrote:
              > >
              > >> What is the relationship between the JTA Server Timeout and an EJB's <transcation-timeout-seconds> parameter?
              > >>
              > >> Does the EJB's timeout have to be >= the servers to take effect?
              > >>
              > >> We tried setting the timeout in the XML file to 60 seconds but the transaction still timed out after 30 seconds or so which makes me believe the server timeout overrides the EJB's timeout.
              > >>
              > >> Is this correct behavior?
              > >>
              > >> We are on WL 6.0 sp1
              > >>
              > >> Thanks
              > >>
              > >> Tom
              > >
              

  • What is the relationship between Acrobat Pro, Acrobat Reader, and the Acrobat Reader Plugin for Firefox?

    Mozilla's plugin scanner identifies an old version of the Reader plugin on my machine. The download indicates a massive 55 MB size, and implies that Reader itself will be installed on my machine. HOWEVER, I don't want Reader installed! I use Acrobat Pro and I have noticed some problematic interactions over the years.
    What is the relationship between Acrobat Pro, Reader, and the Firefox Plugin?

    You can also check out the comparison at http://www.adobe.com/products/acrobat/matrix.html.

  • Relationship Between BP, Contract, Contract Account and industry

    Hi,
      Anybody can send  the relatonship diagram between BP,Contract, Contract Account, and Industry , with Relation ship fields,
    Regards,
    Sivakumar.

    Can u send me your mail id, So that i can mail u.
    These relation is your business specific.....
    If u want i can send you.......
    Regards,
    Shiv

  • Relationship between CRMPAROLTP table(R/3) and R3AC6 transaction(CRM)...

    Hello Experts,
    In transaction R3AC6 where you maintain the middleware parameters, I maintained the 'PRICINGTYPE' value
    to 'G' and in table CRMPAROLTP in R/3, I added a new entry for 'PRICINGTYPE' also with a value of 'G'.
    Now, I am expecting that when I create a new sales order from CRM and passed to R/3, the pricing type of 'G'
    is not being carried out when I check the line item conditions. I have checked so many SAP notes and I can
    say that the pricing type 'G' is supported and needed SAP notes are installed in our CRM. We are currently running
    CRM version 4.0.
    I really don't know what to do anymore. Hope you can help me guys. Thank you and take care!

    Hi Guys,
    Any help?

  • What is the Relationship between CRM On Demand Analytics and OBIEE?

    How are these things different? How are they the same?
    Thanks

    Dear Mohammed,
    You can keep creating new threads for this question but I think the answer will be the same.
    There does not appear at this time to be an opensource API for Java for H.323. I do not know why this is but it appears to be well so. The open H322 site has a C++ project and the last time you asked this question and again today I did quite a bit of searching and I cannot find ANY Java open source API for this. As I also mentioned the last time there was a JSR for H323 but it was withdrawn. Between this and the number of closed source only (but free) implementations I strongly suspect that there are some licensing or something issues with H.323 technology or implementations that are restricting development of versions at least for Java.
    All in all give it up.
    I strongly believe at this point your best and perhaps only recourse is to use the IBM engine. It appears free to use. The source is closed but again I see no alternative.
    Regards

  • Relationship between  arbpl/workcentre in  CRHD  and  resnum,rspos in RESB

    Hi All,
    Can you please help me in getting the realtion between arbpl and rsnum rspos in resb?
    I thought of a solution for this,but i am not very sure whether its correct or not.
    CRHD- objty -pk- A
    objtid-pk--arbid of AFVC table RESB table---rsnum-pk
    arbpl aufpl-pk----
    aufpl rspos-pk
    aplzl-pk_----
    aplzl rsart-pk
    Can you let me know whether this is correct as aplzl -(identifies activity posting)in RESB
    and aplzl (identifies activity posting in order)in AFVC ?
    OR can you give some other solution?
    Thanks

    Hi Sankaran,
    Thanks for your reply.
    i will try to explain..
    Suppose a particular item/material/component  of a production order is picked and then transferred.
    That tansfer order item ( tanum,tapos)material)  is also idetified by rsnum and rspos in RESB table.I want to know the corresponding workcentre/arbpl value of  that item .
    To retrieve the workcentre,i thought my suggested relation will work. and i checked and found to be true for some examples i had.But i am not very sure as meaning of aplzl in resb and afvc are different.
    Thanks in advance.

  • Relationship between account fields in BSEG and FAGLFLEXA

    Hi there....
    I have some questions about the FI Module Standard Table Field.
    As I know, when the FI posting document is made, the BSEG-SAKNR, BSEG-HKONT, FAGLFLEXT-RACCT and FAGLFLEXA-RACCT field is filled with
    account value.
    1) What is the difference about each Table field ?
    2) When we report the Trial Balance, Which field is used to report it?
    With my best regards.

    BSIS is only for Customer Items , So here u wont get all item of a FI enttry.
    where from BSEG  u will get All items which are in that FI accouting entry inlcuding all G/L code.
    for more info check ur prev.post , i given simple example.
    Regards
    Prabhu

  • Relationship between 'business transactions', SAP LUW, and tRFCs?

    Here's what (I think I know:
    - A 'business transaction' is a set of (dialog) steps that have the same 'transaction ID.' I can see the steps of a business transaction in STAD or STATTRACE.
    - An SAP LUW is a set of steps that are a single unit of work.
    - Function calls started with a tRFC are started in a new SAP LUW.
    The questions are:
    - Does an SAP LUW correspond 1:1 to a business transaction?
    - If so, then tRFC spawns sub-transactions. Is there a way (using STAD or STATTRACE) to see, the parent-child transaction relationship? To see which transactions spawned which sub-transactions?
    Thanks.
    Tim

    This was a duplicate post.
    Please post replies to [this thread|Open Hub 3rd party tool - API not returning data table;.
    Thanks.
    Tim

  • Relationship between the currenct view value and  Memberset value

    I have a report with account dimension in the row and time dimension in the col. when I input value 2011.TOTAL in the CV,  From the dropdown manu of the MemberSet, the only two value to make the report work is BAS and BASMEMBERS, if I choose other value such as SELF,DEP. the report will display "EVDRE encountered an error occurs while communicating with web server" message.
    However, if I input 2011.Q1 in the CV, the BAS and DEP is working which will display all the  three month for 2010.Q1., but still not work for SELF.
    I remember in BPC M version, all the above scenario is working.  we are using BPC NW 7.5 now.
    Any idea can share?

    jianbai-
    Possible  cases:
    1.The  error  suggests  tht  your  BPC  excel might  not  be  connected t o the  server.?
    WHen  you  check  your   time  dimension  in your  BPC  excel..do   you  see  your time  hierarchy  as  designed.?
    Also  try   closing  your  BPC EXCEL  and  restarting  it  from  Administration.(Available interfaces).. thus making  sure that  it  is connected to the  Server.
    2.HOw  come  your  options  BAS  and  BASMEMBERS  are  displaying the  same  set  of time  dimensions.
    BAS-  displays  base  members  of  the  CV
    BASMEMBERS -   displays  all   the base  members  for  the  dimension.
    DO  you  have  only  2011.TOTAL  in your TIme  Dimension?
    BAS/DEP-  will  NOT work  if  you  select a   base member  in CV-- and  ask  for  BAS /DEP  of a  base  member-
    evdre  throws  an error.
    Hope  this  provides  some  direction  in solving your  issue.
    -Vm

  • Relationship between sales standard order u2013 Purchase order u2013 Sales Invoice

    In the function screen u2018Document flowu2019, I see the relationship between the sales standard order, purchase order of material and the sales invoice this material. In the table VBFA, it exists the relationships between the Sales Standard Order u2013 Purchase Order and Sales Standard Order u2013 Sales Invoice, but it doesnu2019t exists the relationship between Purchase Order u2013 Sales Invoice.
    I need to link a Purchase Order with a Sales Invoice, which it has invoices the corresponding material had been purchased before, but I donu2019t know which table SAP maintenance this relationship.
    Thanks in advance.
    Xavier Gràcia.

    you found the table, there is no other with a direct link.

  • How to easily find all the relationship between group and reports in OBIEE

    Hi, All:
    I am working with a production env which contains many group and reports.
    I want to know if there is a quick way to export the relationship between all the group/users and all the reports/page/etc.
    Thank you for the kind help.

    Thanks so much !
    May be you can suggest a way around what I trying to achieve. I migrated(imported) one BA from our Prod system to an R12 VIS demo system into the pre-existing APPS EUL as owner SYSADMIN. When I login as SYSADMIN I see all the workbooks(the ones that were migrated from PROD and the ones shipped with VIS). I am interested only in the Workbooks that I migrated from Prod System. There are 100's of migrated workbooks. I was thinking of creating another APPS user and grant this newly created user ADMIN privileges on the migrated BA and transfer ownership of all migrated WORKBOOK. This way when I login as the newly created user I will only see the migrated Workbooks. How do I automate the process to seperate them using SQL or otherwise
    Thanks
    Bismi

  • Relationship between Postion and Org.

    Dear Experts,
    I have the User's network Id. Based on the network Id from HRP1001 I can reterive the postion of the user where the standard relationships are maintained.
    Now i want to create a relationship between the users position (S) and Org (O) and data should be updated in HRP1001.
    Is there is any standard BAPI or Classes / Methods are available for the same.
    Kindly help on this.
    Thanks in Advance.
    Gokul.N

    Gokul,
    For this FM to work you also need NF_GM_SAVE_DATA -> to save the created relation
    But I have found a much better way!!
    Use RH_RELATION_MAINTAIN with function code INSE, it works!
    ACT_FCODE INSE
    ACT_PLVAR 01
    ACT_OTYPE O
    ACT_OBJID org unit ID
    ACT_ISTAT 1
    ACT_RSIGN B
    ACT_RELAT 003
    ACT_SCLAS S
    ACT_SOBID position ID
    ACT_BEGDA assignment validity begin
    ACT_ENDDA assignment validity end
    Dilek
    Edited by: Dilek Ersoz Adak on Nov 13, 2009 2:12 PM

Maybe you are looking for