Relay Server Errors
HI ,
I hope you can help me resolve my issue while configuring Relay Server in SCC , When i try to start Relay Server I get this error."Unrecognized server node ID. the Mobile server node ID is not configuredin the Relay server" .
I have attached two files showing the set up and the error.
Hope some one can help me with this issue.
Regards,
Anil
Hi Anil,
Can you please share the steps done by you in SCC? What is SUP/SMP Version you are working on?
For additional info: Look at these documents
configure relay server in SCC
Rgrds,
JK
Similar Messages
-
Cannot send mail from newsletter server and Server error: Unable to relay
We have newsletter server. Sometimes we sent mail by our exchange 2010 server. But recently we are unable to send mail to external mail server. we sent mail by newsletter server within a domain now. We need to solve. Pls. check below log file and provide
how to solve it.
Sender ID: [email protected]
our domain: www.silkways.net
LOG:
Status Msg : The email details entered successfully into the database.
Status Msg : The email details entered successfully into the database.
Access Level : 1
MAIL SENT TO : [email protected]
FAILED TO SEND MAIL TO : [email protected]
Error : SMTP Error: The following recipients failed: [email protected]<p>SMTP server error: 5.7.1 Unable to relay
</p>
FAILED TO SEND MAIL TO : [email protected]
Error : The following From address failed: [email protected]<p>SMTP server error: 5.5.2 Sender already specified
</p>
FAILED TO SEND MAIL TO : [email protected]
Error : SMTP Error: The following recipients failed: [email protected]<p>SMTP server error: 5.7.1 Unable to relay
</p>
FAILED TO SEND MAIL TO : [email protected]
Error : The following From address failed: [email protected]<p>SMTP server error: 5.5.2 Sender already specified
</p>
FAILED TO SEND MAIL TO : [email protected]
Error : The following From address failed: [email protected]<p>SMTP server error: 4.7.0 Too many errors on this connection, closing transmission channel
</p>
FAILED TO SEND MAIL TO : [email protected]
Error : SMTP Error: The following recipients failed: [email protected]<p>SMTP server error: 5.7.1 Unable to relay
</p>
FAILED TO SEND MAIL TO : [email protected]
Error : The following From address failed: [email protected]<p>SMTP server error: 5.5.2 Sender already specified
</p>Hi,
Since you are able to send emails to internal domain i assume the application server IP address already allowed into Receive Connector.
To relay application emails to external domain you should enable Externally Secured box in the Authentication Tab of the particular Receive Connector.
Kottees :My Blog Please mark it as an answer if it really helps you. -
Error while launching the Relay Server Outbound Enabler for Afaria SP05 components
Hi Experts,
Appreciate your support.
I am facing an issue at RSOE side while i run the below script:
rsoe -cr <param> -f <farm> -id <id> - (To launch the RSOE)
which after editing turns our to be
rsoe.exe -cr "host=bpromobrle100.dmz.nwc;port=80;url_suffix=/ias_relay_server/server/rs_server.dll" -f afaria -id (c9h
Attaching the screenshot of the error. I am unable to find any solution to this.
Thanks & Regards
Sajan MathewGood that you located an article regarding the error. I thought that document was pretty clear for you to find out what went wrong.
IT is not about whether the account you run rshost.exe had admin privileges.
What we say in the document is:
To avoid permission issues, use the same system user to start the rshost process that is used for your IIS Application Pool.
So, the Relay Server rshost.exe process runs as a service. Under which account does it run on?
and under which account you used to configure the IIS Application Pool when you set up the Relay Server?
Are they the same account? -
Relay Server with a Http 500 error (SUP 2.2)
Hello experts,
The history is the following, after upgrading my unwired server from SUP 2.2 SP 02 to SP 05 the aplication stopped working.
We could get Register, but we could but not synchronize.
We connected the device directly to SUP and it worked we could register and synchronize but. when connected to Relay Server only register is possible.
at the moment our only hint is the Http Error 500 that is appearing in the relayserver log. What could be causing the internar error?.
Thanks in advance.
Below there is an example of a Successfull Comunication and a Unsucessful one.
thanks
Laguerta
SUCCESSFUL COMUNICATION
New request for new session from UltraLite/12.0.1.3817 accessing /ias_relay_server/client/rs_client.dll/FARM/ml/APPID/APPVersion
Relaying headers
<Original request header> Content-Length: 1120
<Original request header> Content-Type: application/octet-stream
<Original request header> Host: <-Host IP>
<Original request header> User-Agent: UltraLite/12.0.1.3817
<Original request header> ml-client-id: 3fdf25b0-5efb-11d7-8000-c66fe18554e7
<Original request header> ml-session-id-from-client: 22d75af0-9830-11d7-8000-c7117799da56
<Original request header> X_SUP_APPCID: 150006F0063006B0065007400500043000000434937302D3638323133353231303900__SGFMobility
Start relaying Content-Length body of 1120 bytes
Waiting for response packet
Up padding.
1460 bytes RS_UPCHANNEL_NOOP()
Waiting for client request
Down packet offset 000b8028
527 bytes OE_SERVER_RESPONSE(<F8B0S798R0>;oidx=0;sidx=43;sfp=404d89f3;payload=505;filler=0)
Waiting for server response with trip left: 78987387301
Down packet offset 000b8250
Got next packet after offloading and flow-control. SQ-length=0(ok);LQ-bytes=0(ok);shm=8624608;sfp=404f3
1460 bytes OE_DNCHANNEL_NOOP()
Received down packet
Waiting for server response with trip left: 78987387301
<Response status> HTTP/1.1 200 OK
UNSUCCESSFUL COMUNICATION
New request for new session from UltraLite/12.0.1.3817 accessing /ias_relay_server/client/rs_client.dll/FARM/ml/APPID/APPVersion
Relaying headers
<Original request header> Content-Length: 1616
<Original request header> Content-Type: application/octet-stream
<Original request header> Host: <Host IP>
<Original request header> User-Agent: UltraLite/12.0.1.3817
<Original request header> ml-client-id: 3c9625750-180a-11e4-8000-89c67gh30ec16
<Original request header> ml-session-id-from-client: 0ea17930-1e39-11e4-8000-b0e177c16c6d
<Original request header> X_SUP_APPCID: 150006F006306B006500700500043000000434E37302D3439323133343234393000__APPID
Start relaying Content-Length body of 1616 bytes
Got next packet after offloading and flow-control. SQ-length=0(ok);LQ-bytes=0(ok);shm=8624833092;sfp=6b308e60
Up padding.
Received down packet
1460 bytes RS_UPCHANNEL_NOOP()
Expiring RS session cookie due to previous failure
Waiting for client request
<Response status> HTTP/1.1 500 Internal Server ErrorI'm able to Register but not to Synchronize.
what could lead to this situation?
Thanks in Advance
Sync Profile
APPDB.GetSynchronizationProfile().ServerName = <Relay Server IP DEV>
APPDB.GetSynchronizationProfile().PortNumber = 80;
APPDB.GetSynchronizationProfile().NetworkProtocol = "http";
APPDB.GetSynchronizationProfile().DomainName = "DevDomain";
NetworkStreamParams streamParam = APPDB.GetSynchronizationProfile().StreamParams;
streamParam.Url_Suffix = "/cli/iarelayserver/DevRBSFarm"; //Sync DEV
ConnectionProperties connProps = app.ConnectionProperties;
LoginCredentials loginCredentials = new LoginCredentials(idUser, pass);
connProps.LoginCredentials = loginCredentials;
connProps.ServerName = <Relay Server IP DEV>
connProps.PortNumber = 80;
connProps.FarmId = "DevMBSFarm"; //Login DEV
connProps.UrlSuffix = "/cli/iarelayserver/";
connProps.NetworkProtocol = "http"; -
Error connecting through a Relay Server
Hello, I have a native iOS application and I'm trying to connect this application to the SUP Server through a Relay Server.
Everything works fine when I connection the application without the Relay Server.
The application registers in the server, but a Synchronization error occurs after.
This is the error:
2014-06-06 10:25:24.629 OTMobile[236:907] [INFO] [CallBackHandler.m:289] ================================================
2014-06-06 10:25:24.631 OTMobile[236:907] [INFO] [CallBackHandler.m:290] SYNCHRONIZATION FAILED
2014-06-06 10:25:24.632 OTMobile[236:907] [INFO] [CallBackHandler.m:291] =================================================
The connection parameters:
SUPConnectionProperties *supConnectionProperties = [SUPApplication connectionProperties];
[supConnectionProperties setServerName:kHostName];
[supConnectionProperties setPortNumber:80];
[supConnectionProperties setNetworkProtocol:@"http"];
[supConnectionProperties setFarmId:@"srv.msg"];
[supConnectionProperties setUrlSuffix:@"/ias_relay_server/client/rs_client.dll"];
SUPLoginCredentials *supLoginCredentials = [SUPLoginCredentials getInstance];
[supLoginCredentials setUsername:[self username]];
[supLoginCredentials setPassword:[self password]];
[supConnectionProperties setLoginCredentials:supLoginCredentials];
SUPConnectionProfile *supSynchronizationProfile = [OTMobileOTMobileDB getSynchronizationProfile];
[supSynchronizationProfile setServerName:kHostName];
[supSynchronizationProfile setNetworkProtocol:@"http"];
[supSynchronizationProfile setPortNumber:80];
[supSynchronizationProfile setUser:[self username]];
[supSynchronizationProfile setPassword:[self password]];
[supSynchronizationProfile setAsyncReplay:NO];
[supSynchronizationProfile setNetworkStreamParams:@"/ias_relay_server/client/rs_client.dll/srv.rep"];
I attached some screenshots to help the understanding of the problem.
This one shows the outbound enablers running.
This one shows the properties of one of the Messaging Outbound Enablers.
This one shows the properties of one of the Replication Outbound Enablers.
Thanks!Hi Alan,
Since you are getting error while synchronization that means sup registration is successful correct? Are you able to see registered user in SCC?
Did you also check sup server logs? (C:\sybase\unwired server\server\log)
I believe you will some relevant hints from here?
Meanwhile, can you look at below link:
http://scn.sap.com/community/developer-center/mobility-platform/blog/2014/01/27/how-to-connect-ios-device-to-relay-server
Rgrds,
JK -
Server error: '550 5.7.1 Unable to relay' with authoritative domain
Hi,
When trying to send email to external clients from outlook with (POP accopunts)with authoritative domain email address. we are receiving "Server error: '550 5.7.1 Unable to relay"Where internal emails are going properly.It use to work early &
it stopped suddenly yesterday we did not made any changes in SMTP.
We are able to send & Receive emails with our own domain facing problem only with authoritative domain email address.
Regards,
Perumal PHi,
I recommend you refer to the following article to configure the outlook 2010/2013 using IMAP or POP3, and check the result:
Set Up Outlook 2010 for IMAP or POP Access to Your E-Mail Account
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support -
Server error: 553 sorry, that domain isn't allowed to be relayed thru this MTA
Jane Doe is trying to deliver an email to Nancy Smith. The email which Jane has written, has an Excel file (.xlsx) attached to it. Jane is with Domain A and Nancy is with Domain Z. Both Jane & Nancy are on Exchange 2010. Jane is receiving the following message when trying to deliver email to Nancy.TextYour message did not reach some or all of the intended recipients. Subject: Fuel Recon August 2015.xlsx Sent: 8/3/2015 12:55 PMThe following recipient(s) cannot be reached: 'Username' on 8/3/2015 12:55 PM Server error: '553 sorry, that domain isn't allowed to be relayed thru this MTA (#5.7.1)' '[email protected]' on 8/3/2015 12:55 PM Server error: '553 sorry, that domain isn't allowed to be relayed thru this MTA (#5.7.1)'
I'm not entirely sure that I understand this error message. I am trying to do what I can with Google, and put out...Hey SpiceHeads!
There are 42 good reasons to use hyperconverged infrastructure, but we’ll focus on a trilogy: scalability, built-in high availability/disaster recovery, and affordability. And with the elimination of storage protocols, you won’t even need a babelfish to make your environment work together. Join me and the Scale Computing team tomorrow (Thursday August 6th @ 1PM CT) for "The Hitchhiker's Guide to Virtualization and Hyperconvergence." Say "so long and thanks for all the fish" to old-school virtualization for good! As a Live event bonus we will be giving away a ton of great prizes two attendees will win a Pro Electronics repair kit and one will win a Ology Drone with Camera! So, DON'T Panic, grab your towel, and SIGN UP NOW! Contest is open to SpiceHeads in the US & CA. Contest winners will be announced here in this post... -
Hi,
How do I set up an account to receive email from my SMTP Relay Server?
I've setup the SMTP feature and set my Server to use anonymous authentication.
Things appear to look ok.
But I can't connect make a test connection to it when I am trying to add an email account in Outlook.
I could be doing something wrong here.
This is my process.
1. I have setup my SMTP Server.
2. Created a user account in AD and given it an email address.
3. Opened Outlook and tried to manually add a POP3 account by specifying the incoming and outgoing Server details.
But when I go to test the connection on the email setup it keeps failing.
Please help.
ThanksHi Midi25,
As Florent suggested, please use Telnet to test SMTP Communication. For more details, please refer to following articles.
How to Use Telnet to Test SMTP Communication
XFOR: Telnet to Port 25 to Test SMTP Communication
In addition, please also refer to following article and check if can help you.
How to Configure a Windows Server 2003 Server as a Relay Server or Smart Host
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Sip 500 Internal Server Error Reason: Q.850;cause=16
Please help in understanding what is wrong in the config .Incoming calls don't work.
show run:
voice service voip
ip address trusted list
ipv4 87.226.136.164 255.255.255.255
ipv4 172.16.24.0 255.255.255.0
ipv4 188.254.68.66 255.255.255.255
ipv4 188.254.68.67 255.255.255.255
ipv4 188.254.69.66 255.255.255.255
ipv4 188.254.69.67 255.255.255.255
ipv4 46.38.52.68 255.255.255.255
address-hiding
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
redirect ip2ip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback cisco
sip
voice class codec 1
codec preference 1 g729br8
codec preference 2 g729r8
codec preference 3 g711alaw
codec preference 4 g711ulaw
voice class codec 2
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice translation-rule 1
rule 1 /XXX5397962/ /1999/
voice translation-rule 2
rule 1 /XXX55317577/ /1999/
voice translation-rule 3
rule 1 /5555317884/ /1999/
voice translation-profile ROS
translate called 1
voice translation-profile ROS2
translate called 2
voice translation-profile ROS3
translate called 3
interface FastEthernet0/0
ip address 178.208.X.X 255.255.255.248
ip access-group INBOUND in
no ip unreachables
ip verify unicast reverse-path
ip nat outside
ip inspect IPFW in
ip inspect IPFW out
ip virtual-reassembly in
duplex auto
speed auto
no cdp enable
interface FastEthernet0/1
no ip address
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
ip address 10.110.0.200 255.255.255.0
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.2
encapsulation dot1Q 2
ip address 172.16.24.254 255.255.255.0
ip nat inside
ip virtual-reassembly in
h323-gateway voip interface
h323-gateway voip bind srcaddr 172.16.24.254
ip dns server
ip nat inside source list NAT interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 178.208.X.X
ip route 192.168.0.0 255.255.0.0 Null0 254
sccp local FastEthernet0/1.2
sccp ccm 172.16.24.101 identifier 1 version 7.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register XCODE123456
keepalive retries 1
keepalive timeout 10
switchover method immediate
switchback method immediate
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 6
associate application SCCP
dial-peer voice 10000 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS
destination-pattern 74955397962
session protocol sipv2
session target ipv4:87.226.136.164
session transport udp
incoming called-number XXXX5397962
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10010 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS2
destination-pattern XXX55317577
session protocol sipv2
session target ipv4:87.226.136.164
session transport udp
incoming called-number 75555317577
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10020 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS3
preference 1
destination-pattern 5555317884
session protocol sipv2
session target ipv4:188.254.68.66
session transport udp
incoming called-number 5555317884
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10021 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS
preference 2
destination-pattern 5555317884
session protocol sipv2
session target ipv4:188.254.69.66
session transport udp
incoming called-number 5555317884
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 2 voip
tone ringback alert-no-PI
description to CUCM_PUB
destination-pattern 1...
session target ipv4:172.16.24.101
voice-class codec 2
dtmf-relay rtp-nte
debug ccsip all:
c2801#
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpIPv4SocketReads: Msg enqueued for SPI with IP addr: [188.254.68.66]:9290, local_address:[ - ]
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_event: ccsip_spi_get_msg_type returned: 2 for event 1
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportProcessNWNewConnMsg: context=0x0
06:19:26: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 188.254.68.66:9290;branch=z9hG4bK-6110d60075c89eab-a(STATE_IDLE, SUBSTATE_NONE)
06:19:26: //-1/xxxxxxxxxxxx/SIP/T3c000c-1
Call-ID: isbc6994325518770806443-1385214296-16204
Fransport/sipSPIUpdateResponseInfo: Dialog Transaction Address 188.254.68.66,Port 9290, Transport 1, SentBy Port 5060
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Converting TimeZone MSK to SIP default timezone = GMT
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipSPIUpdateResponseInfo: Dialog Transaction Address 188.254.68.66,Port 929rom:
<sip:[email protected];user=phone>;tag=sbc09026994325from (STATE_NONE, SUBSTATE_NONE) to (STATE_IDLE, SUBSTATE_NONE)
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipSPIUpdateResponseInfo: Dialog Transaction Address 188.254.68.66,Port 9290, Transport 1, SentBy Port 5060
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Converting TimeZone MSK to SIP default timezone = GMT
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipSPIUpdateResponseInfo: Dialog Transaction Address 188.254.68.66,Port 518770806443
ddress_to_bind: return addr 178.208.X.Xone>
06:19:26: //-1/EE5EC9DD8170/SIP/State/sipSPIChangeState: 0x6A874E70 : State change from (STATE_NONE, SUBSTATE_NONE) to (STATE_IDLE, SUBSTATE_NONE)
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipSPIUpdateResponseInfo: Dialog Transaction Address 188.254.68.66,Port 9290, Transport 1, SentBy Port 5060
0
CSeq: 1 INVITE
Min-SE: 90
Session-Expires: 3600;refresher=u6:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Convac
Contact: <sip:[email protected]:9290;user=phone>
A //-1/xxxxxxxxxxxx/SIP/Info/resolve_sig_ip_address_to_bind: rellow: INVITE,CANCEL,BYE,ACK,REFER,UPDATE,INFO,PRACK
Supported:turn addr 178.208.X.X
06:19:26: //-1/EE5EC9DD8170/SIP/St timer,100rel
Diversion: <sip:[email protected]>;privacyate/sipSPIChangeState: 0x6A874E70 : State change from (STATE_NONE, SUBSTATE_NONE) to (STATE_IDLE, SUBSTATE_NONE)
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipSPIUpdateResponseInfo: Dialog Transaction Address 188.254.68.66,Port 9290, Transport 1,
Sen=off;screen=no;reason=unknown,<sip:[email protected]>;priv6:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipSPIUpdateResponsacy=off;screen=no;reason=unknown
Max-Forwards: 70
User-AgenteInfo: Dialog Transaction Address 188.254.68.66,Port 9290, Tra: VCS 5.8.2.56-03
Content-Length: 393
Content-Type: applicatnsport 1, SentBy Port 9290ion/sdp
v=0
o=- 12060 26053 IN IP4 188.254.68.67
s=SBC call
c=IN IP4 188.254.68.67
t=0 0
m=audio 24402 RTP/AVP 8 0 18 98 96 97 101
a=rtpmap:98 G.729a/8000
a=rtpmap:96 G.729ab/8000
a=rtpmap:97 G.729b/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=fmtp:18 annexb=no
a=ptime:10
a=X-vrzcap:vbd Ver=1 Mode=FaxPr ModemRtpRed=0
a=X-vrzcap:identification bin=DSR2866 Prot=mgcp App=MG
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_new_msg_preprocessor: Checking Invite Dialog
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIAddContextToTable: Added context(0x6A874E70) with key=[52] to table
06:19:26: //-1/000000000000/SIP/Info/sipSPI_ipip_vcc_Initialization: Entry...
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipSPIUpdateResponseInfo: Dialog Transaction Address 188.254.68.66,Port 9290, Transport 1, SentBy Port 9290
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/resolve_sig_ip_address_to_bind: calling reg_invoke_ip_first_hop()
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/resolve_sig_ip_address_to_bind: calling ip_best_local_address()
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/resolve_sig_ip_address_to_bind: return addr 178.208.X.X
06:19:26: //-1/EE5EC9DD8170/SIP/State/sipSPIChangeState: 0x6A874E70 : State change from (STATE_NONE, SUBSTATE_NONE) to
c2801#L
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIUaddCcbToUASReqTable: ****Adding to UAS Request table.
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIUaddCcbToTable: Added to table. ccb=0x6
c2801#a
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIMatchSrcIp
c2801#mat: VIA URL:sip:188.254.68.66:9290, Host:188.254.68.66
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIGetShrlPeer: Try match incoming dialpeer for Calling number: : 9067259847
06:19:26:ched for incoming call
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIGetCallConfig: Precondition tag absent in Require/Supported h
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIGetFromCalledPartyId: P-Called-Party-ID header not found
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIGetPeerByCalledPartyId: P-Called-Party-ID not found or parse error
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIGetCallConfig: No match found for P-Called-Party-ID
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIGetCallConfig: Peer tag 10020 matched for incoming call
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIGetCallConfig: Precondition tag absent in Require/Supported header
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/resolve_sig_ip_address_to_bind: calling reg_invoke_ip_first_hop()
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/resolve_sig_ip_address_to_bind: calling ip_best_local_address()
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/resolve_sig_ip_address_to_bind: return addr 178.208.X.X
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIGetCallConfig: Precondition tag absent in Require/Supported header
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIGetCallConfig: Checking Video Type Rate=-1 video_codec_allowed=1F
06:19:26: //-1/EE5EC9DD8170/SIP/Media/sipSPICopyStunConfigFromPeerToCCB: Firewall traversal is not enabled
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIGetModemInfoPerCall: peer_callID=0
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIGetCallConfig: xcoder high-density disabled
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIGetCallConfig: Flow Mode set to FLOW_THROUGH
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIGetCallConfig: Media forking disabled
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIContinueNewMsgInvite: Calling name , number 9067259847, Calling oct3 0x00, oct_3a 0x80, ext_priv 0x00, Called number
5555317884, oct3 0x00
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIContinueNewMsgInvite: Carrier id code , prev_cid NONE, next_cid NONE, prev_tgrp NONE, next_tgrp NONE
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIContinueNewMsgInvite: Requires reliable-provisional support
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIValidateRequestUri: Not Enabled
06:19:26: //-1/EE5EC9DD8170/SIP/Info/sipSPIRscmsmAvail: Value returned by check is = 0
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_IsSDPPassthruEnabled: - 0
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_GetHdrPassthruCfg: Hdr passthrough config:1 tag:0
06:19:26: //129/EE5EC9DD8170/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SESSION_REFRESH_REQ
06:19:26: //129/EE5EC9DD8170/SIP/Event/Session-Timer/sipSTSLMain: dir:2, method:102, resp_code:0, container:6A01759C
06:19:26: //129/EE5EC9DD8170/SIP/Info/Session-Timer/sipSTSLExtractSessionExpiresHdr:
Session-Expires value: 3600 refresher: uac
06:19:26: //129/EE5EC9DD8170/SIP/Info/Session-Timer/sipSTSLExtractMinSEHdr: Min-SE Duration: 90
06:19:26: //129/EE5EC9DD8170/SIP/Info/Session-Timer/sipSTSLGetInternalSREvent: E_STSL_INITIAL_SR_REQ
06:19:26: //129/EE5EC9DD8170/SIP/Info/Session-Timer/sipSTSLInitialSRReqPeerEventGen: sending received session expires to the peer leg
06:19:26: //129/EE5EC9DD8170/SIP/Event/Session-Timer/sipSTSLPrintTDContainer: Peer-Event: E_STSL_PASS_ST_PARAMS, SE Value:3600, SE Refresher:uac, Min-SE Value:1800,
flags:2001
06:19:26: //129/EE5EC9DD8170/SIP/Info/Session-Timer/sipSTSLMain:
SE: 3600;refresher:uac peer refresher:none, flags:2001, posted event:E_STSL_INVALID_PEER_EVENT, reason:4
Configured SE:1800, Configured Min-SE:1800
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIProcessHistoryInfoHeader: No HI headers recvd from app container
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIProcessReplacesHeader: No replaces hdr found
SIP: Warning: Unrecognized attribute (X-vrzcap)
SIP: Warning: Unrecognized attribute (X-vrzcap)
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIDoMediaNegotiation: Number of m-lines = 1
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIValidateConnectionAddress: Dest port = 24402
SIP: (129) Attribute mid, level 1 instance 1 not found.
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/resolve_media_ip_address_to_bind: calling reg_invoke_ip_first_hop()
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/resolve_media_ip_address_to_bind: calling ip_best_local_address()
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/resolve_media_ip_address_to_bind: return addr 178.208.X.X
06:19:26: //129/EE5EC9DD8170/SIP/Media/sipSPISetMediaSrcAddr: Media src addr for stream 1 = 178.208.X.X
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPICheckDynPayloadUse: Dynamic payload(98) reserved for codec g729r8
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPICheckDynPayloadUse: Dynamic payload(98) reserved for codec g729r8
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPICheckDynPayloadUse: Dynamic payload(96) reserved for codec g729abr8
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPICheckDynPayloadUse: Dynamic payload(96) could not be reserved
as its in use by other codec g729abr8
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIUpdateDynamicPT: Requested payload-Type (96) is reserved by another application
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIUpdateDynamicPayloadunused: Unreserving dynamic payload type 96
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIAllocateFreeDynamicPT: Allocating free Dynamic Payload : 99 for Codec:
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPICheckDynPayloadUse: Dynamic payload(97) reserved for codec g729br8
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPICheckDynPayloadUse: Dynamic payload(97) could not be reserved
as its in use by other codec g729br8
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIUpdateDynamicPT: Requested payload-Type (97) is reserved by another application
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIUpdateDynamicPayloadunused: Unreserving dynamic payload type 97
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIAllocateFreeDynamicPT: Allocating free Dynamic Payload : 102 for Codec:
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPICheckDynPayloadUse: Dynamic payload(101) reserved for codec No Codec
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIUpdateDynamicPayloadunused: Unreserving dynamic payload type 99
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPICheckDynPayloadUse: Dynamic payload(101) could not be reserved
as its in use by other codec No Codec
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIUpdateDynamicPT: Requested payload-Type (101) is reserved by another application
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIUpdateDynamicPayloadunused: Unreserving dynamic payload type 103
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIUpdateDynamicPayloadunused: Unreserving dynamic payload type 101
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIAllocateFreeDynamicPT: Allocating free Dynamic Payload : 101 for Codec:
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIDoAudioNegotiation: Codec (g711ulaw) Negotiation Successful on Static Payload for m-line 1
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIDoPtimeNegotiation: One ptime attribute found - value:10
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/convert_ptime_to_codec_bytes: Values :Codec: g711ulaw ptime :10, codecbytes: 80
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/convert_codec_bytes_to_ptime: Values :Codec: g711ulaw codecbytes :80, ptime: 10
06:19:26: //129/EE5EC9DD8170/SIP/Media/sipSPIDoPtimeNegotiation: Offered ptime:10, Negotiated ptime:10 Negotiated codec bytes: 80 for codec g711ulaw
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPISetFaxFlags: FAX_PASSTHROUGH = 0, END_FAX_PASSTHROUGH = 0
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIDoDTMFRelayNegotiation: m-line index 1
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPICheckDynPayloadUse: Dynamic payload(101) reserved for codec
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIReserveRtpNtePayload: Reserved the payload type 101 for RTP-NTE
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIDoDTMFRelayNegotiation: RTP-NTE DTMF relay option
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIDoDTMFRelayNegotiation: Case of partial named event(NE) match in fmtp list of events.
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sip_sdp_get_modem_relay_cap_params: V150 NSE payload = 0, SSE payload = 0, SPRT payload=0
06:19:26: //129/EE5EC9DD8170/SIP/Info/sip_select_modem_relay_params: X-tmr not present in SDP. Disable modem relay
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIGetSDPDirectionAttribute: No direction attribute present or multiple direction attributes that can't be handled for m-
line:1 and num-a-lines:0
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIDoAudioNegotiation: Codec negotiation successful for media line 1
payload_type=0, codec_bytes=80, codec=g711ulaw, dtmf_relay=rtp-nte
stream_type=voice+dtmf (1), dest_ip_address=188.254.68.67, dest_port=24402
06:19:26: //129/EE5EC9DD8170/SIP/State/sipSPIChangeStreamState: Stream (callid = -1) State changed from (STREAM_DEAD) to (STREAM_ADDING)
06:19:26: //129/EE5EC9DD8170/SIP/Media/sipSPIUpdCallWithSdpInfo:
Preferred Codec : g711ulaw, bytes :160
Preferred DTMF relay : rtp-nte
Preferred NTE payload : 101
Early Media : No
Delayed Media : No
Bridge Done : No
New Media : No
DSP DNLD Reqd : No
06:19:26: //129/EE5EC9DD8170/SIP/Info/resolve_media_ip_address_to_bind: Media already bound, use existing source_media_ip_addr
06:19:26: //129/EE5EC9DD8170/SIP/Media/sipSPISetMediaSrcAddr: Media src addr for stream 1 = 178.208.X.X
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_report_media_to_peer:
callId 129 peer 0 flags 0x201 state STATE_IDLE
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_vcc_ProcessXcoderNeeded: xcoder_attached not yet initialised for this call.
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_report_media_to_peer: Xcoder not yet used for the call
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:
CallID 129, Peer CallID 0, sdp 0x69EC3234 channels 0x6A8763C4
06:19:26: //129/EE5EC9DD8170/SIP/Info/copy_channels:
callId 129 size 0 ptr 0x6899F6D4)
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:
CCB t38 version 0 ipip_caps version 0
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:
CCB fax rate 2 ipip_caps rate 14400
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: reset the switch..
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:
Hndl ptype 8 mline 1
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Selecting codec g711alaw
06:19:26: //129/EE5EC9DD8170/SIP/Info/codec_found:
Codec to be matched: 6
06:19:26: //129/EE5EC9DD8170/SIP/Info/codec_found: No match for the codecs found..
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:
Hndl ptype 0 mline 1
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Selecting codec g711ulaw
06:19:26: //129/EE5EC9DD8170/SIP/Info/codec_found:
Codec to be matched: 5
06:19:26: //129/EE5EC9DD8170/SIP/Info/codec_found: codecs[i] = 5 & codec = 5 are same..
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: ADD AUDIO CODEC 5
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/convert_codec_bytes_to_ptime: Values :Codec: g711ulaw codecbytes :80, ptime: 10
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Media negotiation done: stream->negotiated_ptime=10,stream->negotiated_codec_bytes=80,
coverted ptime=10 stream->mline_index=1, media_ndx=1
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:
failed to update call entry
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:
Adding codec 5 ptype 0 time 10, bytes 80 as channel 0 mline 1 ss 1 188.254.68.67:24402
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:
Hndl ptype 18 mline 1
06:19:26: //129/EE5EC9DD8170/SIP/Media/sipSPISelectCodecVersion: Codec (g729r8) is not in preferred list
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: An exact codec match not configured, using interoperable codec g729r8
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Selecting codec g729r8
06:19:26: //129/EE5EC9DD8170/SIP/Info/codec_found:
Codec to be matched: 16
06:19:26: //129/EE5EC9DD8170/SIP/Info/codec_found: No match for the codecs found..
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:
Hndl ptype 98 mline 1
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:
Hndl ptype 96 mline 1
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:
Hndl ptype 97 mline 1
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo:
Hndl ptype 101 mline 1
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: setting ipip_caps DTMF to RFC2833: callid = 129, dtmf = 6
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Copy sdp to channel- AFTER CODEC FILTERING: ccb->pld.ipip_caps.codecInfo[channel_ndx].codec
= 5
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_copy_sdp_to_channelInfo: Copy sdp to channel- AFTER CODEC FILTERING: ccb->pld.ipip_caps.codecInfo[channel_ndx].codec
= -1
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_report_media_to_peer:
callId 129 flags 0x100 state STATE_IDLE
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_report_media_to_peer:
Report initial call media
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_report_media_to_peer: ccb->flags 0x804000C, ccb->pld.flags_ipip 0x201
06:19:26: //129/EE5EC9DD8170/SIP/Info/copy_channels:
callId 129 size 240 ptr 0x69E20A34)
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_report_media_to_peer:
CCSIP: Unable to report channel ind
06:19:26: //129/EE5EC9DD8170/SIP/Info/ccsip_update_srtp_caps: 5798: Posting Remote SRTP caps to other callleg.
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_report_media_to_peer: do cc_api_caps_ind()
06:19:26: //129/EE5EC9DD8170/SIP/Media/sipSPIUpdCallWithSdpInfo:
Stream type : voice+dtmf
Media line : 1
State : STREAM_ADDING (2)
Stream address type : 1
Callid : -1
Negotiated Codec : g711ulaw, bytes :80
Nego. Codec payload : 0 (tx), 0 (rx)
Negotiated DTMF relay : rtp-nte
Negotiated NTE payload : 101 (tx), 101 (rx)
Negotiated CN payload : 0
Media Srce Addr/Port : [178.208.X.X]:0
Media Dest Addr/Port : [188.254.68.67]:24402
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIHandleInviteMedia:
Negotiated Codec : g711ulaw, bytes :80
Preferred Codec : g711ulaw, bytes :160
Preferred DTMF relay 1 : 6
Preferred DTMF relay 2 : 0
Negotiated DTMF relay : 6
Preferred and Negotiated NTE payloads: 101 101
Preferred and Negotiated NSE payloads: 100 0
Preferred and Negotiated Modem Relay: 0 0
Preferred and Negotiated V150.1 Modem Passthrough: 0 0
Preferred and Negotiated V150.1 Modem Relay: 0 0
Preferred and Negotiated Modem Relay GwXid: 1 0
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIDoQoSNegotiationWithMediaLine: QOS negotiation for mline_index 1
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIDoStreamQoSNegotiation: Best effort
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPICanSetFallbackFlag: Local Fallback is not active
06:19:26: //-1/xxxxxxxxxxxx/SIP/Media/sipSPIReserveRtpPort: reserved port 17550 for stream 1
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIUpdateSrcSdpFixedPart: Reserving rtp port for stream 1, src_port=17550
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetMediaDirectionForStream: Setting Media direction SENDRECV for stream 1
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIUpdateSrcSdpVariablePart: Setting stream 1 portnum to 17550
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIUpdateSrcSdpVariablePart:
SIP update src sdp, negoitated codec 5, payload type 0
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIUpdateSrcSdpVariablePart: Negotiated method of dtmf relayand pyld: 6 101
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIAddBillingInfoToCcb: sipCallId for billing records = isbc6994325518770806443-1385214296-16204
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIGetContentCPA: No CPA found in inbound container
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIProcessCPA: No x-cisco-cpa content found
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_GetHdrPassthruCfg: Hdr passthrough config:1 tag:0
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_IsContentPassthruEnabled: - 0
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_ExtractPassthruContentFromSipContainer: Passthru Content Not Enabled
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_store_channel_info: Store channelInfo in CallInfo
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_store_channel_info: dtmf negotiation done, storing negotiated dtmf = 6,
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIShrlCall: Check peer: 10020 for Shared-Line call, callid: 129
06:19:26: //129/EE5EC9DD8170/SIP/Info/ccsip_set_bearer_capability:
Bearer Capability: Speech (0x00)
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIGetContentQSIG: No QSIG Body found in inbound container
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIGetContentQ931: No RawMsg Body found in inbound container
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPICreateNewRawMsg: No Data to form The Raw Message
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIContinueNewMsgInvite: ccsip_api_call_setup_ind returned: SIP_SUCCESS
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIUaddccCallIdToTable: Adding call id 81 to table
06:19:26: //129/EE5EC9DD8170/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SESSION_REFRESH_RESP
06:19:26: //129/EE5EC9DD8170/SIP/Event/Session-Timer/sipSTSLMain: dir:1, method:102, resp_code:100, container:6A0173E4
06:19:26: //129/EE5EC9DD8170/SIP/Info/Session-Timer/sipSTSLValidateSessRefreshMsg: Ignoring 1xx response for session timer processing
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPISendInviteResponse: Associated container=0x6A0173E4 to Invite Response 100
06:19:26: //129/EE5EC9DD8170/SIP/Transport/sipSPITransportSendMessage: msg=0x6A5A1A34, addr=188.254.68.66, port=9290, sentBy_port=9290, local_addr=, is_req=0,
transport=1, switch=0, callBack=0x0
06:19:26: //129/EE5EC9DD8170/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately
06:19:26: //129/EE5EC9DD8170/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0
06:19:26: //129/EE5EC9DD8170/SIP/Transport/sipTransportLogicSendMsg: Trying to send resp=0x6A5A1A34 to default port=9290
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostRequestConnection: Posting UDP conn create request for addr=188.254.68.66, port=9290, context=0x68ABB118
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportSetConnWaitTimer: Wait timer set for connection=0x68ABCB0C,addr=188.254.68.66, port=9290
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportSetConnWaitTimer:
Wait Conn Timer started for 5000 msec
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipCreateConnInstance: Created new initiated conn=0x68ABCB0C, connid=-1, addr=188.254.68.66, port=9290, local_addr=,
transport=UDP
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerGetConnection: connection required for raddr:188.254.68.66, rport:9290 with laddr:
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipInstanceGetConnectionId: Registering gcb=0x6A874E70 with connection=0x68ABCB0C
06:19:26: //129/EE5EC9DD8170/SIP/Transport/sipTransportLogicSendMsg: Waiting for Connection for sending msg=0x6A5A1A34
06:19:26: //129/EE5EC9DD8170/SIP/Transport/sipSPITransportSendMessage: Deferred sending msg=0x6A5A1A34
06:19:26: //129/EE5EC9DD8170/SIP/State/sipSPIChangeState: 0x6A874E70 : State change from (STATE_IDLE, SUBSTATE_NONE) to (STATE_RECD_INVITE, SUBSTATE_NONE)
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIProcessContactInfo: Previous Hop 188.254.68.66:9290
06:19:26: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_PROCEEDING
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_event_handler: switch(ev.ev_id: 165)
06:19:26: //129/EE5EC9DD8170/SIP/Info/ccsip_event_handler:
ccsip_event_handler: peer ID 130 chans 0x6780D478 event 165 flags 0x844001C 0x100 0x601 data 0x6780D478
06:19:26: //129/EE5EC9DD8170/SIP/Info/ccsip_event_handler:
ccsip_event_handler: CC_EV_H245_SET_MODE: peer ID 130 chans 0x6780D478 event 165 flags 0x844001C 0x100 0x601 data 0x6780D478, type = 1
06:19:26: //129/EE5EC9DD8170/SIP/Info/ccsip_gw_set_sipspi_mode: Setting SPI mode to SIP-H323
06:19:26: //129/EE5EC9DD8170/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SET_MODE
06:19:26: //129/EE5EC9DD8170/SIP/Info/Session-Timer/sipSTSLMain:
SE: 3600;refresher:uac peer refresher:none, flags:2001, posted event:E_STSL_INVALID_PEER_EVENT, reason:4
Configured SE:1800, Configured Min-SE:1800
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_event_handler: CC_R_SUCCESS_WITH_CONFIRMED
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_event: ccsip_spi_get_msg_type returned: 3 for event 3
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_event: ccsip_spi_get_msg_type returned: 2 for event 58
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportProcessNWConnectionCreated: context=0x68ABB118
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerProcessConnCreated: gConnTab=0x68ABB118, addr=188.254.68.66, port=9290, local_addr=, connid=3,
transport=UDP
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerProcessConnCreated: connection instance created for addr:188.254.68.66, port:9290 local_addr=
local_port=57282
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportStopConnWaitTimer: Wait timer stopped for connection=0x68ABCB0C,addr=188.254.68.66, port=9290
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipInstanceHandleConnectionCreated: Moving connection=0x68ABCB0C, connid=3 state to established. local_addr=,
local_port=57282
06:19:26: //129/EE5EC9DD8170/SIP/Transport/sipTransportPostInternalMsg: Posting Internal Msg type=0
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_event: ccsip_spi_get_msg_type returned: 2 for event 63
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x6A5A1A34, addr=188.254.68.66, port=9290, local_addr=, connId=3 for UDP
06:19:26: //129/EE5EC9DD8170/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 188.254.68.66:9290;branch=z9hG4bK-6110d60075c89eab-a3c000c-1
From: <sip:[email protected];user=phone>;tag=sbc09026994325518770806443
To: <sip:[email protected];user=phone>
Date: Sat, 23 Nov 2013 13:42:29 GMT
Call-ID: isbc6994325518770806443-1385214296-16204
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
06:19:26: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_ALERTING
06:19:26: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_call_service_msg: ccb NULL, unable to update the callinfo ui parameters
06:19:26: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_MEDIA_EVENT
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_event: ccsip_spi_get_msg_type returned: 3 for event 5
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIAddCiscoGcid: Fatal Error in parsing CCB/Msg
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIStoreTunnelData: Container /RawMessage Absent
06:19:26: //129/EE5EC9DD8170/SIP/Error/sipSPI_ipip_set_history_info_header: Not SIP2SIP mode
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIUaddCcbToUASRespTable: ****Adding to UAS Response table.
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPIUaddCcbToTable: Added to table. ccb=0x6A874E70 key=isbc6994325518770806443-1385214296-1620415B6280-0
06:19:26: //129/EE5EC9DD8170/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SESSION_REFRESH_RESP
06:19:26: //129/EE5EC9DD8170/SIP/Event/Session-Timer/sipSTSLMain: dir:1, method:102, resp_code:180, container:6A017B1C
06:19:26: //129/EE5EC9DD8170/SIP/Info/Session-Timer/sipSTSLValidateSessRefreshMsg: Ignoring 1xx response for session timer processing
06:19:26: //129/EE5EC9DD8170/SIP/Event/sipSPICreateRpid: Received Octet3A=0x00 -> Setting ;screen=no ;privacy=off
06:19:26: //129/EE5EC9DD8170/SIP/Info/sipSPISendInviteResponse: Associated container=0x6A017B1C to Invite Response 180
06:19:26: //129/EE5EC9DD8170/SIP/Transport/sipSPISendInviteResponse: Sending 180 Response to the Transport Layer
06:19:26: //129/EE5EC9DD8170/SIP/Transport/sipSPITransportSendMessage: msg=0x6A5A1A34, addr=188.254.68.66, port=9290, sentBy_port=9290, local_addr=, is_req=0,
transport=1, switch=0, callBack=0x618A57B8
06:19:26: //129/EE5EC9DD8170/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately
06:19:26: //129/EE5EC9DD8170/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0
06:19:26: //129/EE5EC9DD8170/SIP/Transport/sipTransportLogicSendMsg: Trying to send resp=0x6A5A1A34 to default port=9290
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerGetConnection: connection required for raddr:188.254.68.66, rport:9290 with laddr:
06:19:26: //129/EE5EC9DD8170/SIP/Transport/sipTransportLogicSendMsg: Connection obtained...sending msg=0x6A5A1A34
06:19:26: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x6A5A1A34, addr=188.254.68.66, port=9290, local_addr=, connId=3 for UDP
06:19:26: //129/EE5EC9DD8170/SIP/Info/sentInviteResponse18x: Sent a 18x Response
06:19:26: //129/EE5EC9DD8170/SIP/Info/sentInviteResponse18x: Transaction active. Facilities will be queued.
06:19:26: //129/EE5EC9DD8170/SIP/State/sipSPIChangeState: 0x6A874E70 : State change from (STATE_RECD_INVITE, SUBSTATE_NONE) to (STATE_SENT_ALERTING, SUBSTATE_NONE)
06:19:26: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_event: ccsip_spi_get_msg_type returned: 3 for event 30ty-ID:
<sip:[email protected]>;party=called;screen=no;privacy=off
Contact: <sip:[email protected]:5060>
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
06:19:27: //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpIPv4SocketReads: Msg enqueued for SPI with IP addr: [188.254.68.66]:9290, local_address:[ - ]
06:19:27: //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpIPv4SocketReads: Msg enqueued for SPI with IP addr: [188.254.68.66]:9290, local_address:[ - ]
06:19:27: //129/EE5EC9DD8170/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 188.254.68.66:9290;branch=z9hG4bK-6110d60075c89eab-a3c000c-2
From: <sip:[email protected];user=phone>;tag=sbc09026994325518770806443
To: <sip:[email protected];user=phone>;tag=15B6280-0
Date: Sat, 23 Nov 2013 13:42:30 GMT
Call-ID: isbc6994325518770806443-1385214296-16204
Server: Cisco-SIPGateway/IOS-12.x
CSeq: 2 PRACK
Content-Length: 0
06:19:27: //129/EE5EC9DD8170/SIP/Msg/ccsipDisplayMsg:
Sent:
UPDATE sip:[email protected]:9290;user=phone SIP/2.0
Via: SIP/2.0/UDP 178.208.X.X:5060;branch=z9hG4bK120
From: <sip:[email protected];user=phone>;tag=15B6280-0
To: <sip:[email protected];user=phone>;tag=sbc09026994325518770806443
Date: Sat, 23 Nov 2013 13:42:30 GMT
Call-ID: isbc6994325518770806443-1385214296-16204
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Timestamp: 1385214150
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 UPDATE
Contact: <sip:[email protected]:5060>
Min-SE: 1800
Remote-Party-ID: <sip:[email protected]>;party=called;screen=yes;privacy=off
Content-Length: 0
06:19:27: //129/EE5EC9DD8170/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 188.254.68.66:9290;branch=z9hG4bK-6110d60075c89eab-a3c000c-2
From: <sip:[email protected];user=phone>;tag=sbc09026994325518770806443
To: <sip:[email protected];user=phone>;tag=15B6280-0
Date: Sat, 23 Nov 2013 13:42:30 GMT
Call-ID: isbc6994325518770806443-1385214296-16204
Server: Cisco-SIPGateway/IOS-12.x
CSeq: 2 PRACK
Content-Length: 0
06:19:31: //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpIPv4SocketReads: Msg enqueued for SPI with IP addr: [188.254.68.66]:9290, local_address:[ - ]
06:19:31: //129/EE5EC9DD8170/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 500 Internal Server Error
Via: SIP/2.0/UDP 188.254.68.66:9290;branch=z9hG4bK-6110d60075c89eab-a3c000c-1
From: <sip:[email protected];user=phone>;tag=sbc09026994325518770806443
To: <sip:[email protected];user=phone>;tag=15B6280-0
Date: Sat, 23 Nov 2013 13:42:30 GMT
Call-ID: isbc6994325518770806443-1385214296-16204
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=16
Content-Length: 0
06:19:31: //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpIPv4SocketReads: Msg enqueued for SPI with IP addr: [188.254.68.66]:9290, local_address:[ - ]
06:19:31: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_process_sipspi_queue_event: ccsip_spi_get_msg_type returned: 2 for event 1
06:19:31: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportProcessNWNewConnMsg: context=0x0
06:19:31: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 188.254.68.66:9290;branch=z9hG4bK-6110d60075c89eab-a3c000c-1
Call-ID: isbc6994325518770806443-1385214296-16204
From: <sip:[email protected];user=phone>;tag=sbc09026994325518770806443
To: <sip:[email protected];user=phone>;tag=15B6280-0
CSeq: 1 ACK
Max-Forwards: 70
Content-Length: 0
06:19:31: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_new_msg_preprocessor: Checking Invite Dialog
06:19:31: //129/EE5EC9DD8170/SIP/Info/sipSPIFindCcbUASRespTable: *****CCB found in UAS Response table. ccb=0x6A874E70
06:19:31: //129/EE5EC9DD8170/SIP/Info/sipSPIUdeleteCcbFromTable: Deleting from table. ccb=0x6A874E70 key=isbc6994325518770806443-1385214296-1620415B6280-0
06:19:31: //129/EE5EC9DD8170/SIP/Info/sipSPIFlushEventBufferQueue: There are 0 events on the internal queue that are going to be free'd
06:19:31: //129/EE5EC9DD8170/SIP/Info/sipSPIStopRequestPendingTimer: Stopping Request Pending Timer
06:19:31: //129/EE5EC9DD8170/SIP/Info/sipSPI_ipip_free_codec_profile: Codec Profiles Freed
06:19:31: //129/EE5EC9DD8170/SIP/Info/sipSPIUfreeOneCCB: Freeing ccb 6A874E70
06:19:31: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIGetContextFromTable: NO context for key[52]
c2801#
c2801#Hi Ahmed,
Looking at the logs, it seems some important messages are missing..
can you please again collect the following debugs ?
- debug voip ccapi inout
- debug ccsip all
- debug voice translation
Thanks,
Piyush -
Sip 503 service unavailable and sip 500 internal server error
Hi guys,could any one help me in the following.
ITSP-->Voice gateway configured as CUBE-->CUCM-->UCCX
I am moving a system from cme and aa enviroment to cucm and uccx
The VGW is configured as CUBE and also is added as h323 gateway on cucm.
When i tested the debug ccsip messages shows
Sip 503 service unavailable or
sip 500 internal server error.
I can't now provide any debugs cause i am not on site,only on Saturday.
As i read in previous discussion that could be the bind source address problem but i had this configured.
Also i tried to configure the gateway instead of h232 to use sip trunk from cucm,but after this the incoming calls didn't even reach the router,the debug ccsip messages showed nothing.
For now can any one advice me to what these 2 errors related to.
What could be missing?
Thanks in advance.Hi there : can some one explain the reason that i am getting this sip error with itsp:
here is the debug of ccsip messages:
Received:
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
Call-ID: isbc6994325518768294927-1385194135-11717
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
CSeq: 1 INVITE
Min-SE: 90
Session-Expires: 3600;refresher=uac
Contact:
Allow: INVITE,CANCEL,BYE,ACK,REFER,UPDATE,INFO,PRACK
Supported: timer,100rel
Diversion: [email protected]>;privacy=off;screen=no;reason=unknown,[email protected]>;privacy=off;screen=no;reason=unknown
Max-Forwards: 70
User-Agent: VCS 5.8.2.56-03
Content-Length: 394
Content-Type: application/sdp
v=0
o=- 87852 198805 IN IP4 188.254.68.67
s=SBC call
c=IN IP4 188.254.68.67
t=0 0
m=audio 23682 RTP/AVP 8 0 18 98 96 97 101
a=rtpmap:98 G.729a/8000
a=rtpmap:96 G.729ab/8000
a=rtpmap:97 G.729b/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=fmtp:18 annexb=no
a=ptime:10
a=X-vrzcap:vbd Ver=1 Mode=FaxPr ModemRtpRed=0
a=X-vrzcap:identification bin=DSR2866 Prot=mgcp App=MG
00:43:23: //11/FDB448CE8020/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
Date: Sat, 23 Nov 2013 08:06:29 GMT
Call-ID: isbc6994325518768294927-1385194135-11717
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
00:43:23: //11/FDB448CE8020/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 503 Service Unavailable
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
c2801#er=phone>;tag=27BA64-1DAE
Date: Sat, 23 Nov 2013 08:06:29 GMT
Call-ID: isbc6994325518768294927-1385194135-11717
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=38
Content-Length: 0
00:43:23: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
Call-ID: isbc6994325518768294927-1385194135-11717
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To: ;tag=27BA64-1DAE
CSeq: 1 ACK
Max-Forwards: 70
Content-Length: 0
show run:
voice service voip
ip address trusted list
ipv4 87.226.136.164 255.255.255.255
ipv4 172.16.24.0 255.255.255.0
ipv4 188.254.68.66 255.255.255.255
ipv4 188.254.68.67 255.255.255.255
ipv4 188.254.69.66 255.255.255.255
ipv4 188.254.69.67 255.255.255.255
ipv4 46.38.52.68 255.255.255.255
address-hiding
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
redirect ip2ip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback cisco
sip
voice class codec 1
codec preference 1 g729br8
codec preference 2 g729r8
codec preference 3 g711alaw
codec preference 4 g711ulaw
voice class codec 2
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice translation-rule 1
rule 1 /XXX5397962/ /1999/
voice translation-rule 2
rule 1 /XXX55317577/ /1999/
voice translation-rule 3
rule 1 /5555317884/ /1999/
voice translation-profile ROS
translate called 1
voice translation-profile ROS2
translate called 2
voice translation-profile ROS3
translate called 3
interface FastEthernet0/0
ip address 178.208.129.221 255.255.255.248
ip access-group INBOUND in
no ip unreachables
ip verify unicast reverse-path
ip nat outside
ip inspect IPFW in
ip inspect IPFW out
ip virtual-reassembly in
duplex auto
speed auto
no cdp enable
interface FastEthernet0/1
no ip address
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
ip address 10.110.0.200 255.255.255.0
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.2
encapsulation dot1Q 2
ip address 172.16.24.254 255.255.255.0
ip nat inside
ip virtual-reassembly in
h323-gateway voip interface
h323-gateway voip bind srcaddr 172.16.24.254
ip dns server
ip nat inside source list NAT interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 178.208.X.X
ip route 192.168.0.0 255.255.0.0 Null0 254
sccp local FastEthernet0/1.2
sccp ccm 172.16.24.101 identifier 1 version 7.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register XCODE123456
keepalive retries 1
keepalive timeout 10
switchover method immediate
switchback method immediate
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 6
associate application SCCP
dial-peer voice 10000 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS
destination-pattern 74955397962
session protocol sipv2
session target ipv4:87.226.136.164
session transport udp
incoming called-number XXXX5397962
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10010 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS2
destination-pattern XXX55317577
session protocol sipv2
session target ipv4:87.226.136.164
session transport udp
incoming called-number 75555317577
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10020 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS3
preference 1
destination-pattern 5555317884
session protocol sipv2
session target ipv4:188.254.68.66
session transport udp
incoming called-number 5555317884
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10021 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS
preference 2
destination-pattern 5555317884
session protocol sipv2
session target ipv4:188.254.69.66
session transport udp
incoming called-number 5555317884
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 2 voip
tone ringback alert-no-PI
description to CUCM_PUB
destination-pattern 1...
session target ipv4:172.16.24.101
voice-class codec 2
dtmf-relay rtp-nte
I see in the debug that the itsp over g729 family codecs but not g711 at all
This system was working with this dialpeers before with same provider ,just i have added the dial-peer 2 .
I have changed the codec to match what is offered by itsp but no difference,still getting the same message.
PLZ help ASAP. -
Relay server does not start on IIS 8.5
Hello, all
I am trying to set up my Mobilink server to work through Relay server.
The Mobilink server is currently running on the same machine as the IIS.
Mobilink Relay server service is up and running.
But when I try to access the rs_admin.dll in the browser I get the following error:
HTTP Error 400.0 - Failed to attach to Relay Server state store
Can anyone advise me how can I find what is wrong with the configuration?
Thank youHI,
Yes , I found solution for this step but I stuck on one other ...
solution:
set up identity of RS application pool work with local windows user account
Best regards,
Eduard -
Hi,
I am trying to configure relay server 16 for SMP2.3.
By refering link:-http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e084e63d-5764-2e10-bcb5-f943c11c6529?overridelayout=t…
Have successfully done with step:- Installing the Relay Server Components to IIS 7.x on Windows
And while performing step:-Configuring the Relay Server to Run as a Window Service on Relay Server in that after running the command mentioned:-
dbsvc -as -s auto -w SUPRelayServer "C:\inetpub\wwwroot\ias_relay_server\server\rshost.exe" -q -
qc -f “C:\inetpub\wwwroot\ias_relay_server\server\rs.config” -o “c:\Sybase\logs\rs.log”
I am getting with message :-
SQL Anywhere Service Utility Version 16.0.0.1535
Service "SUPRelayServer" was created successfully.
But when my trying to start relayserver services I am getting an error:-
Error
SQL Anywhere Service Utility Version 16.0.0.1535
Service "SUPRelayserver" start pending.
Error starting service "SUPRelayserver".
Log generated in my rs.log file
I. 2014-05-28 13:35:48.096+0530 Character encoding: windows-1252
I. 2014-05-28 13:35:48.096+0530 SAP Sybase Relay Server Version 16.0.0.1535
I. 2014-05-28 13:35:48.096+0530
I. 2014-05-28 13:35:48.096+0530 Copyright © 2013 SAP AG or an SAP affiliate company.
I. 2014-05-28 13:35:48.096+0530 All rights reserved.
I. 2014-05-28 13:35:48.096+0530 Use of this software is governed by the Sybase License Agreement.
I. 2014-05-28 13:35:48.096+0530 Refer to http://www.sybase.com/softwarelicenses.
I. 2014-05-28 13:35:48.096+0530
I. 2014-05-28 13:35:48.096+0530 Machine SUPSRV is running Windows 2008R2 Build 7601 Service Pack 1
I. 2014-05-28 13:35:48.096+0530 Software built for X86_64
I. 2014-05-28 13:35:48.096+0530 Time zone offset from UTC in minutes: 330
I. 2014-05-28 13:35:48.096+0530 <rshost> Parsing config file 'C:\inetpub\wwwroot\ias_relay_server\server\rs.config'
E. 2014-05-28 13:35:48.096+0530 <rshost> RSF11040: Cannot open Relay Server configuration file 'C:\inetpub\wwwroot\ias_relay_server\server\rs.config'
I. 2014-05-28 13:35:48.097+0530 <rshost> Finished
I. 2014-05-28 13:44:53.577+0530 Character encoding: windows-1252
I. 2014-05-28 13:44:53.577+0530 SAP Sybase Relay Server Version 16.0.0.1535
So can anyone please help me on this error.
Thanks & Regards,
AnjaliHi Anjali,
Check your rs.config file extensions. I faced the same issue & i rectified it by giving the correct extension to the rs.config file.
Thanks,
Shrikant Naidu -
Unable to use relay server using https configuration
Hi All,
I am using Sybase Unwired Platform 2.2 SP 04 with iOS 7.1.
I am implementing relay server with https configuration. I have already implemented relay server with http using port 80 which is working fine. But when I am changing the outbound enabler property from http to https in Server Configuration, outbound enabler is giving error
"Could not connect to Relay Server, errCode: 57, sysCode: 11001" in the RSOE log.
Instead of public IP, I am using hostname.com URL for accessing relay server.
Also in browser the availability of the url: /ias_relay_server/server/rs_server.dll is showing none.
Kindly advice.
Regards
DebiduttaHi Wim,
The above log that I posted recently is the messaging RSOE log generated from the sybase control center.
Now below is the log content from the relay server log at C:\inetpub\logs\LogFiles\W3SVC1
#Software: Microsoft Internet Information Services 7.5
#Version: 1.0
#Date: 2014-04-08 13:34:14
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-
Agent) sc-status sc-substatus sc-win32-status time-taken
2014-04-08 13:34:14 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - xxx.xxx.xx.xxx IAS_OE_DnChannel 200 0 64 8050579
#Software: Microsoft Internet Information Services 7.5
#Version: 1.0
#Date: 2014-04-08 13:34:20
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status time-taken
2014-04-08 13:34:20 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 15
2014-04-08 13:34:20 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 46
2014-04-08 13:34:21 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 31
2014-04-08 13:34:21 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 31
2014-04-08 13:34:22 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 62
2014-04-08 13:34:22 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 1781
Below is the log contents found at C:\Windows\System32\LogFiles\HTTPERR-folder
2014-04-08 13:34:15 112.xxx.xx.xxx 60782 172.22.219.193 443 HTTP/1.1 POST /ias_relay_server/server/rs_server.dll 400 1 BadRequest RelayServer
2014-04-08 13:34:15 112.xxx.xx.xxx 60810 172.22.219.193 443 HTTP/1.1 POST /ias_relay_server/server/rs_server.dll 400 1 Connection_Abandoned_By_ReqQueue RelayServer
2014-04-08 13:34:15 112.xxx.xx.xxx 60782 172.22.219.193 443 HTTP/1.1 POST /ias_relay_server/server/rs_server.dll 400 1 Connection_Abandoned_By_ReqQueue RelayServer
As you can see, we are getting Bad Request in the last log contents.
I request you to provide your valuable suggestions on this.
Regards
Debidutta -
After every hours our DEV Relay server hangs and stops responding.
There are no errors received when relay server URL is used but response takes unlimited time.
http://servername.com/ias_relay_server/client/rs_client.dll
To resolve this issue each time we need to reset the IIS so that all application pools are restarted. After this it works OK for a while but later it get stuck again.
Could you please advise
1) If this is a known issue ?
2) How and where to check what is the exact error ?
3) What could be the issue here ?I found few more error while I am working on your suggestion to check ports.
E. 2014-04-02 11:24:24. <8048.932.F1B0S3R5> RSE4008: Communication error [SYS0: Malformed HTTP chunk] occurred while writing response to client of backend server 'DEVASSPMP001' in backend farm 'DEVMBS' when 'scaning next chunk'
E. 2014-04-02 11:24:24. <8048.932.F1B0S3R5> RSE4008: Communication error [SYS0: Malformed HTTP chunk] occurred while writing response to client of backend server 'DEVASSPMP001' in backend farm 'DEVMBS' when 'scaning next chunk'
W. 2014-04-02 11:24:24. <8048.932.F1B0S3R5> Server response NOT completed.
E. 2014-04-02 11:32:14. <8048.4424.F1B0S3R0> RSE4003: Client of backend server 'DEVASSPMP001' in backend farm 'DEVMBS' timed out waiting for backend server response after 480 seconds
E. 2014-04-02 20:50:35. <7148.6704.rshost:master> RSE1017: Timed out waiting for down channels and clients to detach from shared memory during soft shutdown
Can you suggest any pointers for these error. That would be great. You have been a great help. -
500 Internal server error while running sqlsrv_query in PHP
Hello everyone I am having a problem with sqlsrv_query I will be grateful to you please provide some help.
I am running a query through php:
$ls_parcel_query = "select * from ParcelDetail order by ExtractDate";
$result = sqlsrv_query($conn, $ls_parcel_query, array(), array("Scrollable"=>"keyset","QueryTimeout"=>300));
$no_of_rows = sqlsrv_num_rows($result);
echo "<br/>".$no_of_rows;
It gives (After 30 seconds):
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
I have php.ini settings like below:
max_execution_time = 90
memory_limit = 128M
While running this query in SQL SERVER 2008 R2, it successfully gives result in some times in 1 minute and sometimes in 2 minutes.Hello,
A 500 Error will be caused due to many reason.To troubleshooting this issue, you can try to check out the error log and get more information on what is causing the error.
Reference :
"500 Internal Server Error" while running PHP
HTTP Error 500 Internal server for php pages and solution
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support
Maybe you are looking for
-
hi i want to convert the values of an array using a different formula for each value in the array. Can i use formula node for this? if yes how if no then is there any other method except for extracting each one individually and converting?
-
User Status automatically checked when a order is scheduled twice or more
Hello Friends We created a User Status called "Rescheduled" for Work Orders We want that the system flag this status automatically when a order is scheduled twice or more in CM33 Is that possible? Edited by: Davison Tadeu Avigo on Jul 14, 2011 4:23 P
-
Work item 000000400082: Object FLOWITEM method EXECUTE cannot be executed?
Hello, I am getting the above mentioned error during the start of the custom built workflow. The process to re-produce the error is as follows; 1. The employee raises a travel request which goes to his reporting officer for the approval process. 2. T
-
How to establish the route where I appoint in OAMessageFileUploadBean?
Hi I want to direct default route in OAMessageFileUploadBean.But I failed.Can help me, thanks
-
Setting Default value with SQL Query as Data Model
Hi All, I am developing report based on SQL query.date set as 'SQL Query'. I have created two params start-date and end-date. I am fetching records from database between these two dates. I want to populate sysdate as a default values. I do not want t