Release PR after Change

Hi Gurus,
I want to enable a functionality to release the PR after changing the existing one(Which is already released). Please let me know the configs to be done for enabling this.Thanks for your help in advance.
with regards,
Saakithyan

Hi,
Regarding the issue of re-releasing a PR/PO after it has been released and then subsequently changed, please follow the steps below.
1) SPRO --> MM --> Purchasing --> PR --> Release Procedure --> Procedure with classification --> Set up procedure with classification --> Release Indicator
2) Double click on the indicator that you use for the Release (Most of the time, it would be 2 - RFQ/purchase order)
3) Set the changeabil to 4 (Changeable, new release in case of new release strat or val change)
With the setting above, it will retrigger the release strategy. It can be retriggering the same Release Strategy or a different one, depending on the changes that you have made to PR.
However, if the change is a decrease in Value, it will not retrigger the release. Only an increase in val change will it trigger a new release strategy.
Currently, there is no way to retrigger release strategy when there is a change in value (decrease).
Hope this helps.

Similar Messages

  • Re_detemination of release staretgy after changes to cost center

    We have a problem in redetermining release stratergy
    AA -> released
    AB -> released
    AC -> not released
    AD -> not released
    When we change a item cost center, there release stratergy is not redetermined (cancelling all previous releases ).
    When there is a value (price)change, the release stratergy is  redetermined, but not for cost center.
    Both CC and total value are mainatained in class char.
    Any suggestions.
    Thanks.
    Edited by: MIKE JO on Sep 1, 2010 5:20 PM

    Hi,
    The release strategy does not get reset because there is no change in any of the values in CEKKO straucture. Please note that while creating po release strategy in all the char CEKKO structure will be reffered. For change in cost center u will hav to use user exit.
    Regards
    Naveen

  • PO Release Strategy not changed after deletion of few line items with less

    Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
    Dear Friends
    We have issue with PO Release strategy. We have created the PO. with release strategy  with multiple approvers.  After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong. 
    Details of the PO
    PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
    PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
    Are there any OSS notes available to correct his bug.
    Please let me know if you need more details
    Thanks in Advance
    Thanks
    MVS

    Hi,
    release indicators  change it to 4.It may works. Please explore to all 6 indicators..........
    i.e,
    1-cannot be changed
    2-changable,no new determination of strategy
    3-changable,new release in case of strategy
    4-changable,new release in case of strategy or value change
    5-changable,new release if new strategy/outputted
    6-changable,new release if new strategy or value changed/ outputted......
    And check   Characteristic description and value in Classification  of Release strategies ........
    I hope this will help you. Thanking you.
    Regards,
    Venkat.

  • Revoke release of Plant maintenance order after change is done to the order

    Hi
    I need to know if thorugh some configuration I could enable the feature which revokes the release of a plant maintenance order after certain change is done to the order. Please help.
    Thanks,
    Ankbat

    hi
    you cannot revoke the status of released after changing the order. you can explore the use of user status profile
    regards
    thyagarajan

  • Error after changing password in Discoverer Viewer (11.1.1.4)

    I (and all other users) get the below error after changing the password used to login to Discoverer Viewer...
    Weblogic Version 10.3.4
    Discoverer Version 11.1.1.4
    Error
    The application encounters an invalid state. .
    - java.rmi.RemoteException: ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1 ; nested exception is: oracle.discoiv.beans.ConnectionStoreException: ORA-6510: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1
    I have already tried the following oracle note (which did not work): http://docs.oracle.com/cd/E17904_01/doc.1111/e14770/discoverer.htm#BABDJJBE
    "43.1.1 Issues with Metadata Repository and Oracle Database 10g Release 1"
    But we have Oracle Database 11g.
    If anyone has any suggestions please advise. I have had a ticket open with Oracle Support now for a few months and they cannot reproduce.
    Thanks,
    Justin

    We also see this same error when attempting to Create a Connection in Oracle BI Discoverer 11g. I am able to connect to a database but not able to save a connection to said database....
    A connection error.
    - Oracle BI Discoverer Viewer cannot save the connection. Check for other errors.
    - ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1

  • Po printout after change

    Hi MM Gurus
    At present printout is coming in ME9f only after the release approvals are done. But once the print out is taken, and further if they change the quantity or value, system picks up new strategy which is fine. But before releasing the PO after change, still I can go to ME9F, and if I enter 1 in the processing status, still I could take the printout before releases are done after change.
    Is there any config settings to avoid taking printout until release is done.
    Please help
    Regards
    Krishnmaurthy

    Hi,
    There is no standard enhancement to stop users from re-printing a previously successful output.  Maybe it's a training issue, PO officers would want the right info sent to the vendors.  So they should stop using processing status '1' in ME9F which will normally reprint the original PO, not the changes.
    Phyllis.

  • Error after changing datasource

    Hi Experts,
    one of our test systems (IDES) with doule stack including NW Portal is connected to the client 001.
    As we have a lot of users in the client 800 we want to change the configuration of the UME to client 800.
    We used this SAP Help Link:
    [Configuring the UME to Use an AS ABAP as Data Source|http://help.sap.com/saphelp_nw70/helpdata/de/9e/fdcf3d4f902d10e10000000a114084/content.htm]
    After changing the Client in the useradmin page of the J2ee UME configuration - a connection test runs successfully.
    But after restarting the server:
    Server is stopped - Dispatcher is running but no server connected.
    dev_jcontrol:
    [Thr 3440] JControlICheckProcessList: process server0 started (PID:2008)
    [Thr 3440] Mon Sep 29 16:34:14 2008
    [Thr 3440] JControlICheckProcessList: process server0 (pid:2008) died (RUN-FLAG)
    [Thr 3440] JControlIResetProcess: reset process server0
    [Thr 3440] JControlIResetProcess: [server0] not running -> increase error count (4)
    [Thr 3440] JControlICheckProcessList: running flight recorder:
    std_server0.out
    [Framework -> criticalShutdown] Core service security failed. J2EE Engine cannot be started.
    Sep 29, 2008 4:34:12 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_39] Fatal: Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started.
    dev_server0
    [Thr 5748] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 6092] Mon Sep 29 16:34:09 2008
    [Thr 6092] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 6092] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
    [Thr 6092] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
    [Thr 5064] Mon Sep 29 16:34:12 2008
    [Thr 5064] JLaunchIExitJava: exit hook is called (rc = -11113)
    [Thr 5064] **********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'
    for additional information and trouble shooting.
    My first thougts were to check the RFC/JCo connections - so I changed the configuration to the old one via ConfigTool - UME.Services - restarted the J2EE engine.
    Log to SM59 and Configtool. I regenerated the JCo Connection for sapfallback (was not available) and to the portal itself - Tested the connections in SM59 TCP/IP - successfully tested.
    So i tried the changes again (client 800)- with the same errors as above?
    Any idea what causes this misbehaviour? Or is the SAP help link only for initial setting of UME? Are there additional steps when changing from one ABAP Host (or client) to another?
    Thanks in advance
    kind regards
    Tom

    Sometimes I`m a mess!
    Look at default trace error:
    #1.5 #005056827C490074000002DB00000A08000451F31E6385D7#1216004535546
    #com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.R3Persistence][md=populatePrincipalDatabag(AttributeList)][cl=null]
    #J2EE_GUEST#0##n/a##2ce6913050ba11dd8d2d005056827c49#SAPEngine_Application_Thread[impl:3]_6##0#0#Error##Java###
    An exception was thrown in the UME/ABAP user management connector. This exception might be caused by incorrect user input.
    It is written to the trace to assist incident analysis by SAP. Only messages also appearing in the log require administrator assistance.
    [EXCEPTION]
    #1#com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
    Connect_PM  TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1
    LOCATION    CPIC (TCP/IP) on local host with Unicode
    ERROR       partner '127.0.0.1:sapgw00' not reached
    TIME        Mon Jul 14 05:02:15 2008
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2823
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       10061
    ERRNO TEXT  WSAECONNREFUSED: Connection refused
    COUNTER     82
         at com.sap.security.core.persistence.datasource.imp.r3persistence.R3JCo640Proxy$Client640.execute(R3JCo640Proxy.java:465)
         at com.sap.security.core.persistence.datasource.imp.R3Persistence.doBapiUserGetDetailInternal(R3Persistence.java:5238)----
    Any ideas?
    kind regards
    Tom
    Update:
    - the host file contains localhost and service file contains sapgw00 with 3300/tcp?
    - the java stack runs unter https, http is only available for localhost, may this be the problem?
    - Which JCo connection causes this error - actually there are three JCo Connections maintained in VA - .. - JCo RFC Provider - NONE of them connects to localhost??
    Edited by: Tom Uhl on Oct 10, 2008 10:12 AM

  • I cant get onto my MobileMe account even after changing my password

    I am stuck as i cant sync or anything on my mobile me account even after changing password can anybody shed some light on this.

    If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
    Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, type this:
    resetpassword
    That's one word with no spaces. Then press return. A Reset Password window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select  ▹ Restart from the menu bar.
    You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

  • VG224 - some ports show "unregistered" after changing domain name

    hi,
    recently i have changed the domain name of a VG224, before the change, all ports shows "registered" from the CUCM.
    after I changed the domain name from VG224 and CUCM, the VG224 can be registered to CUCM, and some ports can register too...only serveral ports showing "unregistered" in the CUCM. But from the VG224, everything is normal. and call/ fax can be made successfully from those "unregistered" ports.
    anyone has idea what's going on?
    thanks.

    Melany,
    Sorry for the delay,
    I have had a look at bugs etc.
    The only one I can find that may be related is:-
    Change MGCP gateway Domain Name only reset endpoints not whole gateway
    CSCsg39923
    Description
    Symptom:
    Incoming and outgoing calls over an MGCP gateway fails randomly after changing gateway's domain name in CallManager. Sometimes caller receives dead air.
    Conditions:
    The administrator changes the gateway domain name in CCM without stopping Gateway's mgcp service.
    Workaround:
    Reset or reload the gateway.
    Further Problem Description:
    The proper way of changing a gateway's domain name is:
    - Stop Gateway's mgcp service (gateway command: no mgcp)
    - Chnage the domain name in the gateway and in CCM.
    - Start Gateway's mgcp service (gateway command: mgcp)
    Customer Visible
      Save Bug
    ">
    Save Bug
      Open Support Case
    ">
    Open Support Case
    View Bug in CDETS
    ">View Bug in CDETS
    Was the description about this Bug Helpful?
    (0)
    Details
    Last Modified:
    Nov 2,2012
    Status:
    Fixed
    Severity:
    3 Moderate
    Product:
    Cisco Unified Communications Manager (CallManager)
    Support Cases:
    2
    Known Affected Releases:
    (1)
    4.2
    Known Fixed Releases:
    (4)
    6.0(0.9901.37)
    6.0(1.1000.37)
    7.0(0.99999.65)
    1.0(0.98000.42)
    Download software for  Cisco Unified Communications Manager (CallManager)
    Support Cases:
    (2)
    Support case links are not customer visible
    Related Bugs
    Bug(s)
    Community Discussion on CSCsg39923 - Cisco Support Community
    Regards,
    Alex.
    Please rate useful posts.

  • Autoconfig required after changing Paswords

    Hi,
    Every time when I use to change password of apps and sysadmin, I always use to run autoconfig after changing passwords on both application and database Tier.
    Autoconfig & changing password
    But few days back we had issue in our DR as autoconfig has changed the TNS entries and password file and the log file shipping was stopped.
    This time I'm much afraid. Should I run it everytime on both application and database.

    Please post the details of the application release, database version and OS.
    Every time when I use to change password of apps and sysadmin, I always use to run autoconfig after changing passwords on both application and database Tier.
    Autoconfig & changing password
    The thread clearly states that Autoconfig needs to be run when changing the apps password but not any of the application users passwords.
    But few days back we had issue in our DR as autoconfig has changed the TNS entries and password file and the log file shipping was stopped.
    This time I'm much afraid. Should I run it everytime on both application and database.What password did you change?
    What entries were updated/changed?
    Thanks,
    Hussein

  • Master-detail: detail field not displayed after changed by master field

    I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
    In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
    How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

    Wouter,
    I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
    So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
    Steven Davelaar,
    JHeadstart team

  • Message Server Unreachable (after changing IP address at host)

    Hi guys,
    I changed the IP address in my server. According to note 403708, I updated the new IP address in /etc/hosts. The note also suggests me to change in /etc/services but I see no IP address for me to update.
    Later when I restart my sapinstance, I see the disp+work.exe is "Running, but Message Server Unreachable". I've also updated the IP address in SM59 but I see no change.
    This is what I got from dev_rfc.trc:
    ERROR file opened at 20071206 221839, SAP-REL 620,0,674 RFC-VER 3 549374 MT-SL
    T:5048 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1400
    T:5048 <* RfcDispatch [1] : returns 1:RFC_FAILURE
    This is what I got from dev_disp:
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3212]
    Anyone has any idea?

    Yes I'm on Windows, the path that i'm refering is:
    winnt/system32/drivers/etc/services
    winnt/system32/drivers/etc/hosts
    Anyway my prob is fixed now. Probably the problem is due to I did not restart the server after changing the IP. Anyway everything looks pretty fine now
    Thanks guys

  • Internet very slow after changing my previous airport extreme to my new 2T TC

    Hi,
    I just got a new 2T time capsule to replace my Airpot Extreme that worked fine. After installing it I chose to import a previous wifi network to the new TC and my internet became very slow. I read a few online documents sugesting that the internet slows down when backing up large data, but I dont think it is backing up (I did a force quit on systems preferences that "froze" with the cursor becoming a spinning ball) and after that tryed to restart my mac pro, but it has been recovering space from file vault for 2 hours. I am trying to access the internet from my mac air, but the speed is 10% of what I usually get.
    Any suggestions? Starting to regret getting the TC, I had high expectations about it.
    Thanks
    Rubens

    Thanks William.
    I got help from Apple by phone and aparrently after importing the old airport extreme configurations, my time capsule ended with wrong "Radio channel selection" and after changing the 2.4Ghz to 9 and the 5Hhz to 157 the internet connection is back to normal. thanks

  • How do you access updates to apps from the App store after changing to a new ID because the password on the old ID was changed and you don't know what it is now?

    How do you access updates to apps from the App store after changing to a new ID because the password on the old ID was changed by the former husband and you don't know what it is now?  And you set up your own new ID and account but can NOT access the updates, from the App store for the many apps that you already have, because they require that you sign in with that former now inaccessible ID and account and password?  Call it a problem of modern times and changing relationships, if you want to be charitable.

    So I guess it will only be new apps that I download that are allowed to give me their updates while 13 updates wait for me on an ID I can no longer access.
    Yes...  sorry.
    In the future, if need be, you can re download your purchases for free  >  Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Good rule of thumb is to back up your purchases regardless  >  Mac App Store: Backing up your app purchases

  • HT5624 How do I update my Apple ID on iPad and iPhone after changing it?

    How do I update my Apple ID email address on iPhone and iPad after changing the email but not password.  I have verified my new email on iPhone iPad and iMac but settings on all for iCloud still show my old email address. I can't use anything now that needs my Apple ID

    Hello there, Chivs86.
    From what it sounds like you are wanting to sign out of iCloud with the "old" ID and sign in with the new. The following Knowledge Base article should help you with that issue:
    iCloud: Features that work with one account at a time on iOS 5 and OS X Lion or later
    http://support.apple.com/kb/TS4020
    Specifically:
    To change a secondary account to a primary account
    iOS 5 or later:
    Tap Settings > Mail, Contacts, Calendars.
    Delete the secondary account.
    Tap the Back button.
    Tap iCloud.
    Delete the primary account.
    Add the secondary account that you want to be your primary account.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

Maybe you are looking for