Reload Router max. once/24 hr while other actions will run all the time within an EEM applet

I have an EEM script which runs on a track when it goes down, within the actions i have different other things to check and take actions accordingly and they are working fine. I want to include a router reload within the same applet which should only trigger once within 24 hrs., no matter how many times the EEM runs during 24 hrs.
Here is my current applet:
event manager applet MyApplet authorization bypass
event track 10 state down maxrun 3600
action 1.0 cli command "enable"
action 2.0 cli command "conf t"
action 3.0 cli command "service internal"
action 3.1 cli command "do test cellular 0 modem-power-cycle"
action 3.2 cli command "no service internal"
action 4.0 wait 720
action 5.0 track read 10
action 6.0 if $_track_state eq "down"
action 6.1 cli command "int cell0"
action 6.2 cli command "shut"
action 6.3 cli command "controller cell 0"
action 6.4 cli command "lte radio off"
action 6.5 wait 60
action 6.6 cli command "no lte radio off"
action 6.7 cli command "int cell0"
action 6.8 cli command "no shut"
action 6.9 end
At the end i want to add another wait of 10 sec. and check the track state again, if it is still Down I want to trigger a reload, but when router comes back after reload and my EEM triggers again, i don't want to reload if the last reload was triggered within last 24 hrs.

The way you're using wait in this applet is not ideal. It would be better, especially for the long wait, to have this broken up into multiple applets so that they can run asynchronously. In fact, given what you want to do for this reload, that would be the better way to go. If you configured a second applet at the end of this applet like:
event manager environment q "
action 7.0 cli command "event manager applet reload-countdown"
action 7.1 cli command "event timer countdown 10"
action 7.2 cli command "action 1.0 cli command enable"
action 7.3 cli command "action 2.0 cli command $q config t$q"
action 7.4 cli command "action 3.0 cli command $q no event manager applet reload-countdown$q"
action 7.5 cli command "action 4.0 cli command end"
action 7.6 cli command "action 5.0 cli command $q write mem$q"
action 7.7 cli command "action 1.0 reload"
Then you could have another applet that reacts to the tracked object coming up. This applet would simply unconfigure the reload-countdown applet. Thus, if the track comes back up, the reload will not happen.

Similar Messages

When i using firefox its hangups lot of time and theres no other program was running at the time only i am open 4 tab the sites gmail yahoomail facebook twitter

When i use the firefox 12.02 beta version its hangs lot of time and theres no program was running at the time only i am open 4 tab the sites gmail yahoomail facebook twitter why i am using HP 512 MB ram and 40 gb hard disk and intel pentium 4 cpu 3.20GHZ this 11 stable firefox also hanging pls help i am a firefox lover i am using firefox for 4 years
please answer the solution :(
[http://farm8.staticflickr.com/7074/7108695957_a7cd035fd3_b.jpg hangup the tap]
[http://farm8.staticflickr.com/7125/6962618028_b32ecdc8c0_b.jpg Not respond]
[http://farm8.staticflickr.com/7055/7108688293_4916dbe0e6_b.jpg Remember password box not hide ]
[http://farm8.staticflickr.com/7110/7108684531_b394182705_b.jpg hangups on browsing with G+ page]

I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

Database Time Spent Waiting (%): Wait Class Other nearly 100% all the time

Don't understand why OEM is reporting that Database Time Spent Waiting (%): Wait Class Other is nearly 100% all the time. Database 10.1.0.4 just installed on Linux(RHEL4AS) and nobody use it for now except OEM and me for admin purpose.
Any clue for that problem ?
Regards
Nicolas

Seems like you are not the first to see this kind of behaviour.
I've found another similar thread on metalink. I can't say the answer is terribly helpful, but thought you might be interested anyway:
From: Jose Ramón Tourón 14-Sep-07 08:34
Subject: Database Time Spent Waiting (%) at 100 in event class Commit
RDBMS Version: Oracle 10g r2
Operating System and Version: Suse Enterprise Linux 10
Error Number (if applicable):
Product (i.e. SQL*Loader, Import, etc.): database core
Product Version: 10gR2
Database Time Spent Waiting (%) at 100 in event class Commit
Hi everyone, yesterday we create a new database instance with dbca, the creation process was ok, and the two instances are running ok, database stops and starts without any problem, and listeners are ok. In the enterprise manager of this new instance we found this message:
Database Time Spent Waiting (%) at 100 in event class Commit, this event happend every 1 or 2 minutes sometimes at 100, the next 40%, the next 98, ... and so on.
Do you know what's happend in this instance?
Thanks in advance to everyone
Santiago Pérez
From: Oracle, Helmut Pfau 14-Sep-07 12:52
Subject: Re : Database Time Spent Waiting (%) at 100 in event class Commit
From Oracle Database Reference Manual:
Commit
This wait class only comprises one wait event - wait for redo log write confirmation after a commit (that is, 'log file sync')
So you can't write fast enough into your log files.
Did you check the frequency of log switches?
From: Metalink TCS User Group TCS Uruguay 14-Sep-07 15:52
Subject: Re : Database Time Spent Waiting (%) at 100 in event class Commit
Hi José! Please don't get anxious because of this: Wait time must be SOMEWHERE, there's a saying "An OLTP DB is only as fast as its redo logs", but if you are not having any performance problem you don't need to do anything special.
You say you've just created the DB. Now make it DO something: put it to the test by simulating production conditions as closely as you can, and after some hours ask the users whether there is some problem. If there is, take a look at the wait statistics... you'll probably see many other top events before this one!
Bruno abate_at_adinet.com.uy

My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

The problem would seem to be in the firewall in your router. Have you tried disabling it? I assume you've updated the router firmware, right? Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.

My mac redirects me to other sites all the time.its some what slow.how can i fix?

my mac redirects me to other sites all the time.its some what slow.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Name/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

In Oracle Forms, to run all the When-Validate-Item of all the items at once

In Oracle Forms, is there any built-in / procedure / function which is used to run all the When-Validate-Item triggers of all the Items at once ?
I will put it in detail :
When a form is run and while entering the data..
when we enter some data and try to move out of that item then the When-Validate-Item trigger of that item is fired and the code in that trigger is executed..
Similarly there may be many items and many When-Validate-Item triggers correspondigly in a form..
My requirement is to run all the When-Validate-Item triggers of a form at once when we click a button which is created for that purpose only..
So is there any built-in / procedure / function (to run all the When-Validate-Item triggers of all the items), which can be called in the When-Button-Pressed trigger of that particular button..
If any one having any solution/suggestion, please let me know..
Thanks..
Edited by: user2938447 on Nov 8, 2010 9:03 PM
Edited by: user2938447 on Nov 8, 2010 9:12 PM
Edited by: user2938447 on Nov 8, 2010 10:19 PM

Hi Sandy,
Thanks for your suggestion..
The validations should be done at Item level (When-Validate-Item as usually) and seperately again when a button is pressed.
So to put all the code in another block-level When-Validate-Item trigger or in any When-Button-Pressed trigger will be duplication of the code.
Actually I have around 30 Fmbs to be modified and each Fmb is having around 20 Items and almost all Items are having When-Validate-Item trigger.
So,I wanted to know whether there is any Built-in / Procedure in Oracle Forms which runs all the When-Validate-Item triggers once it is called.
Thanks..

Once airport is setup, does it need to be connected via ethernet all the time?

Once airport is setup, does it need to be connected to the router with an ethernet cable all the time?

AirPort Setup....the configuration utility in Mountain Lion...will look at the connection and configure the Express accordingly.
If you have an Ethernet cable connected during the setup, then you will need to leave the Ethernet cable connected after the setup.
If you want the Express to connect using wireless only....then you must configure it using wireless only.

GE60 ONC - HDD scratching all the time but HDD usage near 0%!

Hello to all!
I recently bought an MSI GE60 ONC.
I started the computer by running Windows 8 OEM. Then my nightmare began.
1/ Waited almost 2 hours to DL Windows Update (60 upgrades found)
2/ Extremely HIGH HDD usage was encountered 100% when using WU...
3/ After all updates where done HDD usage at 0% down to 100% so I tought the problem was solved.
4/ Now when starting my computer the HDD usage seems ok BUT my HDD is still scratching all the time as if he was working... I'm sitting on the desktop doing nothing but the HDD is always working.
And now I heard a litle weird noise every 5 min.
Refreshing Windows 8 with F3 DONE
Installing Windows 8 with F3 DONE
Help!
PS: Sorry if my english is weird it is not my first language.

how much system RAM you got?
and yes HDDs are not much fastern and they N1 units which slow down systems.

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How do I update my iPad to ios5 I am getting an error mesage -402653081 while backing up the iPad, if I proceed then I will loose all the content of the iPad?

How do I update my iPad to ios5 I am getting an error mesage -402653081 while backing up the iPad, if I proceed then I will loose all the content of the iPad?

The IOS5 upgrade will erase everything on your iPad, so make sure you have a good backup before you start.
If not, you will just have to reenter all of your settings all over again. Have you ever backed it up successfully?

How can I stop new tabs to show up while I am using Firefox? It happens all the time...

While I am using Firefox, new pages keep opening all the time, new tabs. Even for writing this message I had to close new pages many times. It is boring, I am considering not using Firefox any more if I can´t fix it.

hello fachoa, you have various malicious addons present. please try these steps:
# [[Reset Firefox – easily fix most problems|reset firefox]] (this will keep your bookmarks and passwords)
# afterwards go to the firefox menu [[Image:New Fx Menu]] > addons > extensions and in case there are still extensions listed there, disable them.
# finally run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.
[[Troubleshoot Firefox issues caused by malware]]

Once my phone once I registered my laptop all the time deducted from the two mastercard 1.98 euros I want my money back!

Once my phone once I registered my laptop all the time deducted from the two mastercard 1.98 euros I want my money back!

Each time that you add or change your credit card details on your iTunes account a small temporary store holding charge may be applied to check that the card details are correct and valid and that it's registered to exactly the same name and address as on your iTunes account - it should disappear off your account within a few days or so.
Store holding charge : http://support.apple.com/kb/HT3702

HT4993 my phone repeat the same song all the time, and i want to know what can i do to automatic pass to others songs

my phone repeat the same song all the time, and i want to know what can i do to automatic pass to others songs

You probably have Repeat turned on. While playing the song, tap the cover art to reveal the additional music controls (see photo below). Tap the Repeat control on the bottom left until it turns white (white is off, blue is on).

While working with Google Documents Safari Version 7.1 on OS X 10.9.4 crahses all the time

While working with Google Documents Safari Version 7.1 on OS X 10.9.4 crahses all the time
Now I am working with FireFox
Today I have noticed that FireFox had this Google Talk pop-up
Maybe this pop-up Google Talk is what is causing Safari 7.1 to crash Attached JING of Google Talk pop-up on FireFox
So, back to SAFARI 7.1..how to stop this pop-up from crashing Safari 7.1

You downloaded a beta copy of 7.1 because the current version is 7.0.5. There was a mixup yesterday and 7.1 was accidentally made available for downloading. Do you have a backup you can restore from to get 7.0.5?
You can also try running the combo update to see if it will restore it.
10.9.4 Combo Update

InDesign CS6 crashes all the time while importing an image

InDesign CS6 crashes all the time while importing an image. Does anybody knows what's going on? How can I solve this problem. Please help me cause I can't work. Thanks a lot!

AlgoritmoMX schrieb:
Thanks a lot for your quick response. I convert images to CMYK because it is best for me to see the final colors in screen when working in Photoshop. As you know, some colors (like green) have a lot of problems in rendering quite accurate when you work in RGB and then convert to CMYK (greens tend to look very vivid in RGB and then very pale and lack of contrast when converted to CMYK). In doing so, it's not reliable for me to work in RGB and then convert to CMYK in RIP or in PDF export. When working in Photoshop, you have a more precise control of color when images are in CMYK, although we all know that the respresentation of CMYK on screen is just that, a merely representation of what it sholud look a CMYK image on screen (because screen works with RGB as you know).
Also, my question and concern is that ID should let you paste images in CMYK and tiff format also (not only PSD) , so what's the point in having those features if they are not going to work at all?
This problem never happened to me in earlier versions of ID.
Thanks a lot again!
That is not true at all. You can turn on in Photoshop the CMYK proof preview which would look exactly the same as if you have converted the image to CMYK. A CMYK proof print from a RGB file with a profile has exactly the same output as if the file has been converted to CMYK under the same settings. Even if you have CMYK images, you see only a back converted RGB image on screen! This is a simulation and it is exactly the same simulation as if you would turn on the CMYK preview of a RGB image! You can see even the plates of a CMYK image.
A CMYK file has a size from 133% of the same file in RGB! So you have shuffle around in CMYK with more data than you would do with RGB images. InDesign is supposed to handle RGB images for print since version 2.0 and since CS (Version 3) it is working without problems. And it can do it better due to smaller file sizes than with CMYK! Try it and you will be astonished how much time and work you have wasted useless in converting images to CMYK.
Have a look to this discussion: http://forums.adobe.com/thread/753454
Other actions you might take is to resave the tiff image without any compression or with a different compression to force Photoshop to write the file completely new.

Reload Router max. once/24 hr while other actions will run all the time within an EEM applet

Similar Messages

Maybe you are looking for