Reload the same viewController with different data?

Hi -
I have a view which can have either a list of, say, fruit, or fruit vendors. If it a list of vendors, clicking a vendor loads a view where it lists the fruit they sell. If it's a list of fruit, clicking a fruit loads a view where it lists all the vendors of that fruit.
The same view controller controls that page no matter which set of data is displayed.
What I'd like to do is animate the transition when that click takes place just like I was going to a different view controller.
I tried this:
[[self navigationController] pushViewController:self animated:YES];
But it's not doing anything - at all.
Is there a way to do this short of rewriting it to have two separate view controllers for the two sets of data?
(Sorry, posted this in the wrong forum and I don't see a way to delete it here...)
Message was edited by: Sue Boettcher1

Well, I spoke too soon.
I can get the page to load and it animates right, but I think I haven't got it hooked up right in the nib "referencing outlet" stuff correctly.
I can't get my head around it - I have to create a new instance of the view INSIDE a method for the view itself. I can see where the other (original) instance of the view is hooked up in the nib but I can't figure out how to hook up the new second instance.
I'm probably not explaining this very well but I can't post a screenshot...

Similar Messages

  • HT2905 I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

    I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

    In iTunes(on a Mac or PC) just tap on 'Albums' rather than 'Artists' and you'll see them all together.
    You may find that there are songs mislabelled. In which case right tap on the Album or Artist and tap 'Get Info', then change to the correct name and the songs will join the rest of the songs for that Artist or Album.
    Then resync with your iPhone and all will be well.

  • How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?

    How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?

    Load the library which doesn't contain the songs and drag them into the open iTunes application window. If you need to move them between different computer user accounts, put them into /Users/Shared/.
    (74502)

  • Why can't two different users use Itunes on the same computer with different log ins

    Why can't two different users use Itunes on the same computer with different log ins

    Pmorgan5672 wrote:
    Why can't two different users use Itunes on the same computer with different log ins
    They can, but not at the same time.
    If one user left iTunes running, and another user tries to use iTunes from a different Windows user ID, that second user will get an error message.  If they really want to use iTunes, they either have to beg the first user to log in and close iTunes, or else they have to restart the computer.
    If you are asking the technical reason why, it is something about context switching.

  • CAn I run Lion and snow leopard on the same computer with different sign-ins?

    CAn I run Lion and snow leopard on the same computer with different sign-ins?

    Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

  • Can you have 2 ipods on the same accounts with different play list?

    Can I have 2 ipods on the same accounts with different plalists?

    Sure.  Each iPod is identified in iTunes with its own name and you configure each one as you wish:

  • Use the same form with different button turned on in different calls

    Can I use the same form with different buttons turned on in different calls?
    Thanks!

    This is to avoid piracy. What could happen is, people could buy music, and give it away for free online. Usually it is then you buy a complete album off iTunes that it will only be available on one device. It is tied to that account, and the device must be registered to that account to listen to it.

  • HELP!! Authorization in the same laptop with different operation systems

    My BF installed Win 7 operation system on his laptop yesterday and re-authorized it when he used iTunes. However, when he finished authorization, a dialog block showing that "*Including this one, you have authorised two computers out of your available 5*" appeared; what's worse, when he connected his iPhone to the laptop, it deleted all the bought apps in the iPhone, instead of synchronizating.
    I also want to install Win 7 operation system, but I'm afraid that the same thing would happen again (to my iTouch).
    We're quite confused that why the authorization in the same laptop with different operation systems is counted as two times. Friends who know please tell us whether this is the case.. If not, please tell us how to deal with it as we frequently re-install operation system for quicker operation.
    Message was edited by: Shiwen
    Message was edited by: Shiwen

    It's the *operating system* that is authorised, not the particular user profile or the hardware. Before upgrading/reinstalling deauthorise and you won't run out...
    tt2

  • HT5622 I have 2 iPads in the same household with different addresses and I get my wife's emails which I don't want , she doesn't get mine , what is the problem

    I have 2 iPads in same household with different email addresses , I have just set up my wife's one and her emails are coming to both address why is that, as her details are not on my machine and vice versa, help

    You must have added your wide's email account in the Settings app.
    Settings > Mail, Contacts, Calendars > select on your wife's email account > scroll down to Delete and delete her account from your iPad.

  • Share Photos on the same iMac with different user accounts... How do You???

    Hello,
    I was wondering if there is a way to share photos with another user (same computer, different log-in names) on the same iMac?
    There are two users on my iMac and I want to be able to share photos and other documents, music etc. with them, but can't seem to do it.
    Please help.
    Thank you.

    What you mean by 'share'.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
    Remember iPhoto must be running in both accounts for this to work.
    If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc. The problem here is that OS X works very hard to keep your data safe and secure from the other users. You're trying to beat what's built in to the system. So, to beat the system
    Quit iPhoto in both accounts
    Move the iPhoto Library Folder to an external HD set to ignore permissions. You could also use a Disk Image or even partition your Hard Disk.
    In each account in turn: Hold down the option (or alt) key and launch iPhoto. From the resulting dialogue, select 'Choose Library' and navigate to the new library location. From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
    However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
    Lastly: This method seems a little clunky at first, but works very well. Most importantly, it uses the System to do the job for you.
    Create a new Account on your Mac, call it Media. Create an iPhoto Library there. (BTW: This will work for iTunes too.)
    Enable Sharing on the Library:(Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other accounts. In those accounts, enable 'Look For Shared Libraries'. The Library will appear in the other source pane.
    This means that both users will be able to see the pics. If you want to use a pic then simply drag it from the shared Library to your own in the iPhoto Window. This means that each user can have their own edits.
    If you want to add photos to the Library: Log into the Media account for that purpose.
    To make it all seamless: Set your Mac to log into the Media Account automatically. Set iPhoto to launch on log-in. Then switch to your own account using Fast User Switching.
    Net result: a Library that's permanently available to all users but also protected. Each user can have their own versions of the pics if they want.
    No partitioning, no permissions issues. Uses no extra disk space. What's not to like?
    Regards
    TD

  • Confused about synching multiple phones to the same computer with different content: itunes wants to erase everything??

    I have had an i5 for some time, but my partner just bought one to replace her 3GS. We both synch to my itunes, and have been doing so for as long as I can recall. When we got her i5, we backed up her 3GS and reloaded the content into her i5. So far so good. Now, this couple of weeks later, I decided I wanted to put some of the movies, music, etc. that I have on my itunes library on her phone. I had previous installed some of the apps that I have there without trouble. However, when I tell my itunes to put movies (etc) onto her phone, it warns me (upon apply) that this phone has been sync'ed to another itunes, and that I can do what I am asking, but it will erase everything on the phone now! I cancelled this op at this point.
    As far as I know neither of us has sync'ed her phone to any other itunes, although she has probably downloaded stuff directly into the phone using the onboard itunes. Is that what it's warning me about? Is there any way to either pull the content off the phone, or merge the content with what she had locally downloaded? If not, I'm willing to sacrifice the few things that she had locally loaded as long as it's not going to, for example, erase all her photos, and contacts, and everything else as well at the same time!
    This is all rather confusing to me. It's actually rather confusing that one can synch multiple devices with different settings at all, and I'm extremely surprised that it works at all. Can someone clarify what's going on here? What I should/shouldn't do? What I can/can't do?
    Thanks in advance!

    First make sure you have authorised the iTunes computer you are using for all of the associated apple ID's via the Store Menu>Authorise this computer and enter the apple ID and password used on the phone (repeat for as many apple ID's are in use on the phone).
    Then right-click (or Control Click) on the name of the phone and select Transfer Purchases (this can also be found under File>Device>Transfer purchases). This will back up all of the purchases on the device to your computer, then when you sync with the phone it will put them back on even though it has just removed them.
    Its a round about way of doing it but she shouldn't loose anything as long as the computer is authorised for all of the apple ID's used on the phone

  • Backup and restore the wss_content db to the same server with different name

    Hi,
     I want to restore the content db of 80 port in my sp 2013  web appln to a different web appl. is this possible?
    By default wss_content is pointing to the 80 port. so if i wanna take the backup of this content db and restore it in the same machine as a  different content db name, is this achievable?
    if this is achieved, i want to mount this newly restored content db to a new  web appln.

    Hi Benjamin,
    you could restore database with new name using below script
    RESTORE
    DATABASEWSS_Content_NewFROMDISK='C:\Program
    Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Backup\WSS_Content.bak'
    WITH
    MOVE'WSS_Content'TO'C:\Program
    Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\WSS_Content_New.mdf',
    MOVE'WSS_Content_log'TO'C:\Program
    Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\WSS_Content_Newt_log.ldf'
    Regards,
    Regards, <b>Khalil Kothia, PMP </b>
    Blog

  • Creative cloud education on the same computer with different account

    hi, I bought  a 1 year creative cloud (education version) which will expire in few months. Perhaps I will skip to a different version or maybe not, still don't know. My question is: I have plans to sell my computer to a friend (student) and he would like to buy also a creative cloud (education version) and install it on that computer (or just use the adobe softwares already installed there and buy an education licence)...is it possible to do it or on a single computer (same ip) could run only 1 creative cloud installation?
    I try to explain it in different words: is it possible to install adobe softwares (or use the already installed adobe softwares) on the same computer but with a new (and different account) creative cloud education version (once the previous one expired)?
    thanks in advance for the reply

    When you sell the computer to your friend, then you have to just deactivate the CC Activation & Deactivation Help , you do not have to uninstall Adobe CC, your friend needs to sign in with the Adobe ID under which he purchases the CC.
    Regards
    Rajshree

  • In I-Tunes, how can I consolidate multiple copies of the same album with different tracks into one file in my library screen?

    In Windows 7 , I tunes library/ albums, I have many albums ( all the same) with different tracks in each.
    Is it possible to consolidate the multiple cover photos into one ?

    Generally setting a common Album Artist will fix things, if not see Grouping tracks into albums.
    tt2

  • Install many executable on the same PC with different names

    Hello,
    I'm trying to install several executables with different names in the same computer but at the end of install process the message is : "an higher  or existing version is already installed in this computer"
    I create the Executable and Setup with LabVIEW Application Builder and install the executable in the same Program Files root directory with a different sub-directory for each executable as this : Program Files-->MyProject-->SubProjet1 with exe1/SubProject2 with exe2 etc...
    My OS is WinXP pro SP2 and I work with LabVIEW 8.5.
    Thanks and regards,
    Armindo PINTO

    Hi Armindo,
    Thank you for using the NI forums! 
    From what I understand, you are trying to create multiple executables of a vi project to co-exist on the same PC. Any time you re-use the LabView 8.x project file, it will generate
    install package with the same product ID number. That means, if the
    deployed PC has the previous version installed, which had been
    generated from the same project file, the new install package will
    remove the previous version and overwrite it with the new version. Or as in your case, not allow you to install lower versions of the executable. That
    means, the previous version will be no longer available on the deployed
    PC. If you are creating an upgraded version to the product this is
    fine.
    However, if you need to re-use the LabView 8.x project
    file and generate a new product, which can potentially co-exist with
    the previous on the end user PC, you need to generate a new installer
    with a different product ID number. One of the way to do it:
    Copy existing project file (e.g. "name1.lvproj") under a different name (e.g. "name2.lvproj")
    Open the new instance of the project
     Expand the "Build Specifications"
     Right click on the installer specification, e.g. "name1 Installer"
    Select "Duplicate" from the menu
    You can now delete the instance "name1 Installer" and rename the "Copy of name1 Installer" to a suitable name, e.g. "name2 Installer"
     Make changes that are needed between the two versions, for example:
    Select a new source VI
    Build a new exe file
    Reflect the new exe file in the "name2 Installer"
    Make
    any other changes needed in "name2 Installer", for example different
    documentation files included in install, change in the target install
    directories, changes in the start menu shortcuts. etc.
    Build the install.
    Please let me know if this solves the issue, and let me know how you get on.
    Kind regards,
    Ashish Naik
    Field Sales Engineer
    National Instruments UK

Maybe you are looking for

  • How to merge existing itunes library with another time machine volume?

    hi all, i am 2 macs, an iMac and a MacBook - both running Snow Leopard 10.6.3 and both running itunes 9. is possible to merge the itunes library on the MacBook onto the iMac via my MacBook's Time Machine volume? i do not have my MacBook with me at th

  • Impossible to "save as" a workbook in a role

    Hello All, I would like to know which authorization object allow an end user to save as a workbook into a role. So far, our user only allowed to "save as" a workbook within their favourites folders, role folder is not display for them. I cannot find

  • Using OO Abap programming optimally

    Dear experts, I developed a report purely on Object Oriented concepts.It works really fine. Now my requirement is that in one of my module pool program i want to retrieve some data from that report itself and show in my Input help. I deliberately mad

  • How to transfer itunes library to new comp?

    I just got a new laptop. I want to transfer my itunes library from my old computer onto my new one without having to re-enter all of my cds (that would take hours). Any ideas?? IBM Thinkpad    

  • Calculate age in adf

    Gurus, Any inbuilt way to calculate age in adf in year, month format ? thnks