Remote control does not know

The menu botton does not work

The docking station (or Mac) must have an IR receiver in order for the remote to work.
My set up in my car is an older (30-pin) dock along with a bluetooth receiver. Then I can keep my phone near me and can control my music from the phone.
~Lyssa

Similar Messages

My remote-control does not wo

Hi ! I bought an Audigy2 ZS Platinum Pro SoundCard and I do not know how it works. I tried to configure it buy the "Remote control and OSD parameter" (in french, it is "T?l?commande et param?tres OSD"). I want to know if I can control a movie on my DVD players with it (I do not belei've). Thanks for your response.

Well, theoretically you should be able to control all sorts of media software with the remote. Unfortunately, the drivers for it and its compatability with non-Creative software leave much to be desired. So far I have only gotten the remote to work with Creative MediaSource software (used it to play mp3's). I tried it with Winamp 2.78 (yes, I prefer the older versions) and it failed miserably.
I haven't yet bother trying to control DVD software with it since the driver is quite unstable.

Remote control does not work with DVD player.

I have a HP Pavilion DV6135nr, the remote control came with the computer, its a RC6. I can not get the computer to recognize the remote control.

Have you tried if this remote works with any other HP notebook? if not, have you replaced the battery on the remote to check its not a battery issue on the remote?
Although I am an HP Employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

"Mission Control" does not show space row and I cannot add a new space (27 inch screen)

Firstly, "Mission Control" does not show upper row with spaces. I have configured Dashboard as space, but it is not showed either.
Second, I cannot add a new space because the upper right corner wont show an empty space.
In system I have configured (Mission Control) the upper right corner as "mission control".
I do run a 27-inch screen

I'm having the exact same problem. I have a Macbook Pro that I connect to a 27inch iMac through the mini display port. Whenever I attempt to launch Mission control to move a program to a different space, the "Spaces" dont appear at the top of the screen. Is anyone have an answer for this?
Also, does anyone know of a 3rd party program to bring "Spaces" back? That was my #1 favorite thing of Snow Leopard, and I need to get that functionality back.
Thanks

Remote Button does not appear in iTunes 11

Any ideas on how to get the remote button to appear?
I'm running iTunes 11.1.3 (8) on an iMac 3.06 GHz Intel Core 2 Duo with OS X 10.9.
I've changed my Sharing Preferences to "Share my library on my local network" and "Home Sharing computers and devices update play counts".
I think I know where to look for it: right next to the iTunes button, where an iPad button would appear if you were to plug one in.
I've clicked "View > Show sidebar"; there is no remote button on the list.
I've turned iTunes off and on again on the desktop.
I've turned Remote off and on again on the device.
I've rebooted both the desktop and the device.
Still no remote button!

Hi Scott,
Thanks for using Apple Support Communities. The Remote app does not appear in the iTunes library; instead, the iTunes library appears in the Remote app which you can then use to manipulate that library. This article has some information that might help:
About Remote app for iPhone, iPad, and iPod touch
http://support.apple.com/kb/ht1947
This page also has some additional information:
Apple - Apps - Remote
http://www.apple.com/apps/remote/
Cheers,
- Ari

TPC-2006, Dial control does not show

I am using a TPC-2006 based on Windows CE, the problem I have is that I want to show on the panel a Dial control, but the control does not show fine, it seems that there is a problem with that, I would like to know if there is an upgrade of firmware or something that can help.
Another thing is that it is a 3D control, but in LabView PDA there is no Dial on Classic controls, would it work if I import a Dial classic control?
Best regards,
Gilberto Garza
Asesor Electrico, Mexico
Gilberto Garza Gzz.
Certified LabView Developer
Asesor Electrico, S.A. de C.V.

Yes, the dial control displays in a funny way, I mean, the circle of the dial does not appear, even if I colour it in labview it does not show in the display of the TPC2006. The only thing that appears in the screen is the label of the numbers of the dial, and the indicator of the position of the dial, but when you move the position of the dial, it seems that the screen does not refresh the movement and it leaves the marks where the line of the position was before.
Right now I don't have with me the equipment, I found this bug in the offices of NI in Mexico, but as I will work with this kind of displays It is very interesting to me that it works fine.
Best regards,
Gilberto Garza
C.L.D.
Gilberto Garza Gzz.
Certified LabView Developer
Asesor Electrico, S.A. de C.V.

2002 G3 600 mhz iMac display stays dim with an unidentified sign displayed. The contrast control does not work.

My display screen is dim and the contrast control does not work. There is a sign on the screen that I have been unable to identify. It is a white circle outline with a half moon solid circle within it. Does anyone know what's wrong?

There is a sign on the screen that I have been unable to identify. It is a white circle outline with a half moon solid circle within it
That would be a screen contrast symbol
My display screen is dim and the contrast control does not work.
Did you reset the PRAM? http://support.apple.com/kb/ht1379 And the pram battery may need to be replaced if it is over 3 years old it is under the iMac under the ram cover and there is a little button in there to reset the pmu as well. you have to have it pluged in when you do a pmu reset. there is a lot more stuff to try before the worst case scenario that is a bad PAV board the Pav is what runs the monitor and if it is going bad That may be a syptom that it is haveing and they can not be fixed (Well not for under $250 and that is useing old parts because they do not make them any more) but that wood be worst case scenario. Lets just hope it just needs to be reset Try that and Keep us posted

HP "Support" does not know how to perform "regionalization reset", now what?

I buy a dual voltage OfficeJet 4620 in Germany in Ferbruary 2013.
NOWHERE in the product literature does it mention the ink cartridges are regionalized (defeats the purpose of even manufacturing a 110-220v device! But I digress).
I move to Florida in June and yesterday my black ink begins to run out.
The printer needs the "regionalization reset" which can only be performed by HP support, as stated by their own webpage:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02558798
Another description of it here:
http://www.fixya.com/support/t156381-change_region_code_ink_cartridges
I call HP support, and waste over an hour and a half with a girl in the Phillipines until she finally tells me that I need a complete set of USA ink cartridges in order to perfom the procedure (which appears to be not true, you do not need them to reset the printer, but rather it appears you need them simply if you wish to print anything after the reset was performed if for no other reason but to verify that the reset was successful). She claims HP support will call me this morning at 11AM EST. They did not call.
I call HP "Support" at 1130 EST and go through the wickets with them again. This time the girl does not know what to do and is clearly completely unknowledgeable about the product, mush less how to troubleshoot it, and instead she is simply following a script. Another hour wasted. After being put on hold for the 4th or 5th time for 15 minutes, I simply hang up. (Realizing later that this is an intentional strategy.)
I call again. Now I am speaking to some guy in India. He does not know what he is doing either and tries to guide me through the support menu on the printer itself, but his script does not match the menu options on the printer. Back to the 15 minute intervals of hold broken up by him saying "one minute please sir while I verify some information". Another hour wasted, until I finally begin to realize that none of these people know what to do.
Still I call back and get another guy who leads me into the Support menu (press the return button 4 times to access this menu) . The he has me go to the Reports Menu and select the "print mech button tap" option, which prints out a 2 page "Printer Hardware" printout. He asks me to "give him the numbers on the document, but the document has all sorts of numbers on it from serial numbers to product numbers to other numbers with labels that are simply abbreviations. I ask him which numbers he needs from the two pages full of numbers, and back on hold I go for 20 minutes. He comes back and says "the long number, there should be a long number". Well the longest number on the document is the Serial number which I have already given during the initial information polling he did and so I ask him if he needs it again. Back on hold i go for another 20 minutes. Now the 15-20 minute hold cycle resumes, with him "checking something" and he will "be right back". Eventually he simply clicks over to see if I am still on the line and immediately puts me back on hold without saying anything. I put my phone on speaker and I wait him out, having already wasted an entire morning and half my afternoon.
Now this was the best part....HE BEGINS TO PRETEND LIKE HE IS HAVING MICROPHONE PROBLEMS AND CANNOT HEAR ME (yes I know, what does his microphone have to do with hearing me, I had the same thought). It is obvious he has simply either taken his headset off his head or moved the mic far away from his mouth and is pretending he can't hear me and that he will call me back and asks for my number. I ask him how is he going to hear me tell him my number (which by the way he already took at the beginning of the conversation) and he continues his ruse. So I hang up. It is obvious he doesnt know what to do and no one else there is going to help me.
Now I call back tonight around 930PM EST, and I get the Phillipines again. I go trough the whole polling phase with the girl and explain to her that I need the regionalization reset performed, and that all I need is to know which numbers of my printer to give to HP Support so that they can give me the code I need to reset this device. I politely tell her that I understand if she does not know what to do or understand what the procedure is and that I will not be angry with her if she is simply honest and tells me so, but that I want her to tell me if there is anyone there where she works who will definitely know how to do the reset, a supervisor or actual technical advisor, anybody. She is friendly and honest and says this is the frst time she has heard of this and she will ask what to do. Back on hold for 5 or 10 minutes. She claims she is looking in her "resources" for the way to do this. Nothing. I ask her to please stop and get her supervisor, she claims she is checking with her supervisor and that they are "checking the resources" for the procedure to reset regionalization. I foolishly think we are making progress.
After 20 minutes of her constantly telling me she is checking her resources, even after I have told her what the procedure entails and that all she needs to do is find the procedure and tell me which numbers it requires from the device itself in order to provide the reset code, I tell her to stop what she is doing and put her supervisor on the phone. She stalls. She says she is sorry but they have never heard of this procedure before and that she will schedule me a call-back for tomorrow. YEAH RIGHT. I ask her WHO is going to call me tomorrow? She replies that it will be them and that they will have the answer. I tell her that I already heard that from them the night before and I dont have another day to be wasted. I tell her to put her supervisor on the phone and I want the name of whoever is in charge of her office. She tries to ignore me and continues to ask for my phone number (which she already has). I press her for the name of who is in charge and she finally claims "Peter" is the supervisor. I tell her to put "Peter" on the phone. 10 minutes of hold and later a guy picks up the line, claims he is "Peter" and asks how I am doing. I politely say I am well and I ask him for his last name. He asks why I need his last name. i repeat my question, "What is your last name Peter?"..........his reply? "hello, sir? I am having trouble hearing you, can you hear me?" He begins to play with the microphone and puts me on hold. Each time he picks up and asks if I am there I immediately ask him for his last name, to which he resumes the ruse that he cannot hear me. I stay on the line. At this point it appears that HP must have some sort of policy where their "Support" personnel are not allowed to hang up the phone first, perhaps it is even tracked as a half-assed internal method of "Quality Assurance", and these people know it and this is why they will leave you on hold for ever and wait until you hang up. So, I wait Peter out for about 10 minutes, I am not on hold because there is no music, the microphone is simply muted. I tell him i know he is there and can hear me, and that i know he cannot hang up first, and then he promptly hangs up.
SO, my question....
NOW WHAT?
How does anything get escalated at HP when their overseas "Support" doesn't know what to do?
I live in Miami and there is a corporate headquarters there for HP Latin America. I am thinking of walking right into the lobby and finding someone with authority, but in all honesty I just want the d*** printer region reset so I can use these ink cartridges I already bought and opened.
Suggestions?

Hi,http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
First, I am sorry to see your experience, however be aware that this forum is a peer-to-peer community and not a direct contact with HP.
To clarify, the product specification do list the ink cartridges regionalization, the specifications itself reffer to HP Suresupply to locate the ink cartridges for your region, as well as the following document which clearly state that information:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03239171&tmp_task=prodinfoCategory&cc=uk&dlc=en...
Firs be sure to have the latest software installed prior contacting HP support, which should be listed as 28
You may find that information listed in the following document (Check the How can I tell which driver version I have? section), if you have any older version be sure to uninstall it and install the latest software, as listed within the same document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
If you need, the latest software can be found below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108821-3&cc=uk&dlc=en&lc=en...
Next ensure you have any of the 564 ink cartridges, once the printer being reset it require all the 4 ink cartridges to work
Finally check the private messages I sent you prior contacting HP support , the envelope icon at the top-right part of that screen.
The ensure you use the correct contact details lease double chekc it below:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Syncing iphone and it froze, now it does not know my iphone.

I was syncing my iphone and it froze. I had to disconnect and now it does not know my iphone. What do I do now?

What doesn't know your iPhone?
Allan

HT1212 MY PHONE IS LOCKED MY STEPSON SET UP A ICLOUD ACCOUNT AN NOW HE DOES NOT KNOW THE USERNAME OR PASSWORD AN I HAVE TRIED HOOKING IT UP TO ITUNES AN CAN NOT RESET ANYTHING. WHEN U TURN THE PHONE ON IT SAYS HELLO AN THEN ASK FOR THE STATE AN THE WIRELE

HEY MY PHONE IS LOCKED AND MY STEPSON STEP UP A ICLOUD ACCOUNT AN KNOW HE DOES NOT KNOW THE ICLOUD USERNAME OR PASSWORD. WHEN I TURN THE PHONE ON IT WILL SAY HELLO AN ASK FOR THE STATE AN THE ASK FOR THE INTERNET PASSWORD. THEN IT ASK FOR THE ICLOUD AN THE PASSWORD AN WE DONT KNOW IT TO GET THE PHONE UNLOCKED. I HAVE TRIED HOOKING IT UP TO ITUNES BUT IT DOES NOTHING JUST GOES BACK TO THE SAME SCREEN. SO CAN U PLEASE HELP ME UNLOCK MY PHONE. IVE BEEN THE THE VERIZON STORE AN THE THE APPLE STORE AN THE SAID THEY CANT UNLOCK IT THAT I HAD TO GO ON AN WEBSITE IFORGOT.APPLE.COM AND EXPRESSLANE.APPLE.COM AN WHEN U PULL IT UP YOU DONT KNOW WHAT TO GO ON BECAUSE THERE IS SOME MANY TO CHOOSE FROM SO IT DOESNT HELP ME AT ALL. ITS LIKE THAT ON BOTH WEBSITES THEY FAIL TO TELL U THAT THERE IS ALOT TO CHOOSE FROM. IF THEY WOULD GIVE YOU THE ONE TO GO TO START WITH U WOULDNT BEEN ON THE COMPUTER FOR HOURS AN HOURS AT A TIME.

drop the CAPS thats rude.
iforgot.apple.com there is a link for find my apple id click here
https://iforgot.apple.com/appleid?language=US-EN&returnURL=https://appleid.apple .com/cgi-bin/WebObjects/MyAppleId.woa&app_id=93&app_type=ext
Peace, Clyde

I would like to use my work exchange email on my macbook pro. But I cannot insult it. I have not problem as on my iPhone or iPad. My work IT person does not know what is wrong.

I would like to use my work exchange email on my macbook pro. But I cannot install it. I have no problem my work email on my iPhone or iPad. My work IT person does not know what is wrong. Why I try to set up the email I get the message that it cannot connect to this server.

Try going into System Prefereces then Mail, Cintacts & Calendars then click on the Microsoft Exchange link on the right. Type in your email address and password and allow it to set it up automatically.
Make sure your Mac is updated to the newest version of Mail.
If that still fails then I suggest you switch email clients. I don't care for the built in mail program. IMHO it is very buggy.

After Export to excel response handler, control does not restore

I am downloading an excel file from a bsp page using the following code. However, after the download the control does not come back to the page from where the download was done. l_xml_xstring variable has the data in xstring format.
lv_content_type = 'application/vnd.ms-excel'.
    -> create response
runtime->server->response->set_header_field( name = if_http_header_fields=>content_type "'Content-Type'
                                      value = lv_content_type ).
runtime->server->response->set_header_field( name = 'content-disposition'
                                      value = 'attachment; filename=output.xls' ).
IF NOT l_xml_string IS INITIAL.
    runtime->server->response->set_data( l_xml_xstring ).
ENDIF.
navigation->response_complete( ).
Is there any additional step so that the control comes back?
Thanks

(sorry i really dontknow, because the same works in my case)
alternate approach.
for your case you dont have to generate cached response.
create a bsp page and set its MIME type to application/vnd.ms-excel (in the properties tab of the page)
within the layout , just have a simple html table with data.
now call this page, you will automatically get the save / open option.
Regards
Raja

Error remote table does not contain a primary key

I make replication between oracle and Microsoft sql using getway for sql but when I insert to table in oracle I get this error in apply process
information :
ASD.SUBHI.COM is database link from oracle to microsoft sql
"DBO"."REGIONS" name of the table
CREATE TABLE regions (a INTEGER primary key) command to create table
error
ORA-26711: remote table does not contain a primary key constraint ORA-26712: remote object is "DBO"."REGIONS"@"ASD.SUBHI.COM"
Note: I go to sql server and verify that primary key is creates
is this the best place to like this question ?
if you need more details please tell me I need the answer

I make replication between oracle and Microsoft sql using getway for sql but when I insert to table in oracle I get this error in apply process
information :
ASD.SUBHI.COM is database link from oracle to microsoft sql
"DBO"."REGIONS" name of the table
CREATE TABLE regions (a INTEGER primary key) command to create table
error
ORA-26711: remote table does not contain a primary key constraint ORA-26712: remote object is "DBO"."REGIONS"@"ASD.SUBHI.COM"
Note: I go to sql server and verify that primary key is creates
is this the best place to like this question ?
if you need more details please tell me I need the answer

Drive Utility Help Viewer "does not know how to handle selected URL"

I have Drive Utility 10.5.6, according to . I'm trying to reformat a FAT32 partition on an external drive to Mac OS X Ext. Journaled in preparation for using SuperDuper to back up my Mac HD boot partition. For a time, which seems to have passed, now that erasing the partition has been done. The Disk Utility Help wouldn't work. Instead of putting up topic information, I got a message saying "Help Viewer does not know how to handle selected URL", followed by an reference to an html file that allegedly existed inside a set of folders inside the app. Where, of course, Finder cannot see. Once the erasing was done, Help seems to have come back. I tried Apple Support, but could only get a reference to OS 9 Appleworks macros not working in OS X. No help at all. Is this a question? I don't know. Help is working now. But for a while it was very annoying. It must be one of those little windows glitches that no one ever bothered to fix.

In order to change a FAT or NTFS formatted drive for use with OS X you will need to do the following:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you have an Intel Mac and can partition the drive using GUID then you can have FAT32 and OS X partitions on the same drive.
As for problems with the Help viewer see:
In most cases doing the following will restore the Help Viewer:
1. Trash the following three files, if extant:
/Home/Library/Preferences/com.apple.help.plist
/Home/Library/Preferences/com.apple.helpui.plist
/Home/Library/Preferences/com.apple.helpviewer.plist
2. Trash the /Home/Library/Caches/com.apple.helpui folder.
3. Empty the Trash and Restart.
Visit The XLab FAQs and read the FAQ on the Help Viewer for additional suggestions.

I move folders from my internal hard drive twice to an external hard drive. Now I believe Lr does not know how to find my photos. What can I do to get this cleared up.

I move folders from my internal hard drive twice to an external hard drive. Now I believe Lr does not know how to find my photos. What can I do to get this cleared up.

Jim has a very good suggestion. There are many factors at work here:
1) How are you connecting the external drive to the computer?
2) How big are files (329 x 1MB is not the same as 329 x 25MB)?
3) What is your computer specification?
4) Do you have any power saving settings on (in particular something that would send the computer/hard drives to sleep)?

Remote control does not know

Similar Messages

Maybe you are looking for