Remote Desktop and Windows Firewall Settings Not Working,

Hi to all....
In My office am using Windows 7 ultimate x64 OS,Remote Desktop is Not working for Reason is Firewall is Turn on,i go to Control Panel Settings to turn off the Firewall,But Firewall Setting are Not Working
i Traced the Event Viewer its shows Error Code 5, Am search any patches for this error but cannot find it, Any one Advice Me.....i Hope Your Valuable Reply.....

Hello,
this forum is related to Windows Server. For Windows 7 please ask in
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Similar Messages

Remote Desktop and Brother MFC-6490CW not working

I have installed a Brother MFC-6490CW on my iMac 20" Intel with Leopard 10.5.6 and have had no problems getting to work using local mac programs printing through the USB cable.
I cannot get it to work correctly when I log into my Windows 2003 Terminal Server and print to the local Brother printer.
Originally, I had not installed the driver on the server and the connection would use the standard Apple LaserWriter 8500 driver. This was fine for as long as you only wanted black & white 8.5x11.
I then installed the driver only on the server and was asked more questions than usual. I had to pick out whether it was a USB or ethernet printer off of the server. Since it is neither, I just selected LPT1 and hoped the remote desktop would ignore it and sent it to the virtual port.
It does send get sent back to the Mac, but I get the error 'client-error-not-psossible' from the Mac printer spooler.
Brother support was useless, they said it must be a Microsoft problem. It is amazing that these little disposable $100 printers work fine, but the expensive networkable Brother printer won't. I suspect it is only a configuration problem on the server, but do not know what to do.
Thanks for the time......

Mac Skoog –
I have a few questions for you on this –
- Is the printer and Server in the same location.
- Can I assume that the printer is currently connected to the Mac.
Here are some things to consider –
When connecting to a Windows system via RDP windows will attempt to connect to the default printer of the computer (Host System) running the Remote Desktop Client. This only works if the connecting system (Windows 2003 server) has the same drive loaded/available as the host system. I have seen issues with RDP not playing well with USB printers or rather USB printers with ‘special’ drivers.
If the systems are together might I suggest that you connect the printer to the server directly via the network –
http://www.fullerton.edu/it/services/Networks/faq/PDF/network_printer.pdf
Once you do this then you won’t need to connect to the printer connected to the Mac.
Respectfully –
BH

Windows 2008 R2 Remote Desktop Services - user profile path not working

Trying to setup remote desktop profiles. We have 1 farm with 2 Windows 2008R2 RD session hosts and a broker server and want the all of the remote user profiles to reside on a dedicated profile server. We've created the user shares but when a remote
user logs in their user profiles is automatically created on the session hosts. Each remote users profile path is specified in AD under the user's Remote Desktop Profile tab.
I've seen posts about creating a GPO to handle roaming profiles but I'm not sure as to where this needs to be created...should it be done on each of the session hosts? Are their any step by step instructions out there on how to achieve this that I just haven't
found yet?
bl

Hi,
Thank you for posting in Windows Server Forum.
Do you have RD Gateway setup in your environment?
Have you configure RD Connection Broker and set the Fully Qualified Domain Name (FQDN) of the RD Connection Broker server in case of RD Connection Broker mode. In RD Session mode, it is set to the FQDN of the RD Web Access server.
Client operating systems must trust the certificate with which the RemoteApp programs are signed. Suggest to install RDP 8.1 for client OS.
Do you have a trusted certificate with a matching name configured on your RDSH server in RD Session Host Configuration? (Means cert must match the name that clients use to connect to it for running the RemoteApp).
Hope it helps!
Thanks.
Dharmesh Solanki

Remote Desktop and Windows 8.1

I may not have this in the correct form area, and if so, I apologize.
I have Windows Sever 2012 datacenter running and until about a week ago, from my Windows 8.1 (with Update), I could remote into the unit with remote desktop connection.
Now, when I try the window pops up that a session on my computer is already in progress (the Windows 8.1 says this).
I can remote ok from the 8.1 to other servers and other PCs.
I can remote from other PCs into the Server 2012.
I can EVEN remote into the Server 2012 from the 8.1, BUT I have to use the IP address of the server in the remote connection box.
Same subnet, same domain. Worked fine until about two weeks ago and started after no updates or such. Can ping to and from both units by both name and IP with no issue.
Please advise and thank you!
Darryl Robertson

Similar problem found:
a session on my computer is already in progress
http://craigshoemaker.net/blog/avoiding-remote-desktop-connection-error-console-session-in-progress
Need more information for the troubleshooting:
How you start remote desktop? Shortcut or "mstsc" command?
Try command and post result:
mstsc /v servername /admin
or
mstsc /v servername /console
Have you checked the server, is there undisconnect console session on it?

HELP - Remote Desktop and Windows? Is it possible? I need your thoughts...

I am currently trying to set up a connection between my MacBook and my Windows XP PC. I have Leopard 10.5.3 and Windows XP. I want to set up the connection to my PC so I can use my Remote Desktop to control/observe/receive files from my PC to my MacBook. So far its been going well, I was searching on Google for some answers, and I read something about VNC Viewer and Remote Desktop. I am not sure how this works but I just want Remote Desktop to work with my PC. So I was just wondering if anyone here can help me out, or if anyone here has any suggestions/ideas. Thanks.

You've probably figured this out by now, but you can't use Remote Desktop with XP Home. It only works with XP Pro. As a free alternative, you should be able to run a VNC server on the XP machine, and a VNC client on the Mac, and access that way. A brief decription can be found here: http://lifehacker.com/software/feature/geek-to-live--how-to-control-your-home-co mputer-from-anywhere-125607.php (Ignore the parts about opening ports on your router to the internet--this is best used only on local network, unless you get more complicated.) If you do want access over the net, perhaps its better to go with a commercial service such as pcAnywhere or GoToMyPC is an easier route.

Sharepoint server in remote connection in Windows Aure is not working

I have tried to Connect the SharePoint server in windows azure im getting following error. i have followed the steps provided by this url.,http://www.sqlchick.com/entries/2014/7/17/creating-a-sharepoint-server-farm-in-azure-part-2
anyone can help me?

Hi Gowtham,
Apologies for the delay in responding to this query.
Try connecting using the cloud service name instead of the machine name. Check the remote desktop port (Public)is accessible from your network. Check for VM endpoints for RDP and Powershell if the ports are open, else create new endpoints for your VM.
http://blogs.msdn.com/b/brian_farnhill/archive/2014/02/04/opening-rdp-session-to-an-azure-vm-with-powershell.aspx
If not then try the following
1. Download the RDP file again and try connecting again
2. Shut down and restart the machine via the management portal
3. Make sure the BuiltIn firewall in Windows 2012 is not blocking your RDP connection
4. The RDP endpoint is created by default and so should be correct, however double check. If you have created a custom RDP connection, you have to also use the public port within the server name
Hope the above mentioned steps help you.
Girish Prajwal

Microsoft Remote Desktop Connection Client for Mac Not Working

I recently purchased Office 2011 for Mac. I work at home on my Mac at work on Windows 7. I also have a work laptop, running Windows 7, that comes home with me. My goal is to RDC my Mac to the laptop running Windows 7 to reduce desktop clutter, and easily work between machines.
I CAN NOT FIGURE OUT how to get Microsoft RDC:mac to connect to my pc.
I know that the pc allows remote desktop connections because I often use RDC at work from PC to PC.
SOME PLEASE HELP! I have spent hours and hours trying to figure this out and I think it is the time capsule that is causing the problem.
My research has found that I have to use port 3389 to get this done. I am pretty computer savy but when it comes to networking I guess I have no clue. I have tried just about everything a and can't figure it out.
Thanks to anyone that can dedicate some time to configureing my time capsule to allow for RDC.

I cannot quite put together your whole network..
I work at home on my Mac at work on Windows 7. I also have a work laptop, running Windows 7, that comes home with me. My goal is to RDC my Mac to the laptop running Windows 7 to reduce desktop clutter, and easily work between machines.
So this is in local lan.. the PC laptop running win7 and the Mac loaded with RDC software. If this is local lan then the issue is nothing to do with TC.
That is only if you are trying to connect from work. to home through the router at work and TC at home. On local lan there is no blocking to ports. Are you using the local network IP of the PC Laptop?
Explain a bit further as it needs a bit more clarification.

Remote Desktop Connection to VM does not work after sysprep

Hello altogether.
Often asked, but never answered with an applicable solution!
What shall
we
do if
we
get no access to a Azure VM via Remote Desktop
Connection?
Everything went well: access to the VM via RDC was working perfectly!
Then
the idea came into
our
mind to create an image of the VM by use of the Azure Management Portal.
We
found that
we
had to apply “sysprep”
on the VM.
We
did it.
Then we did not take the image and decided to go on with the VM.
But if we start the VM we get no access via RDC!
We tried to find a solution by reviewing the already published contributions by other Azure
users. But none of the replies marked as answered supply with a qualified solution.
So can one provide a really applicable solution to us on how to arrange the further use of the VM?
Thank you in advance.

There is an issue right now where the VM may start unexpectedly after you have run sysprep and selected the shutdown option (which is normally what you should do).
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/fafb9ee6-1e57-46ba-8440-27467ad986cf/image-capture-issue-vm-unexpectedly-started-after-guestinitiated-shutdown?forum=WAVirtualMachinesforWindows
But regardless of that issue - you can't use that deployed instance of the VM after you've run sysprep on it. It needs to stay shutdown, then you select Capture to create an image from it.
If you start it back up, either intentionally, or it is started unexpectedly because of the issue above, it will be sitting at the first interactive screen of setup. RDP is not working at that point, and since there is no console access to an Azure VM, there
is no way to get past that prompt.
For other scenarios, you might be able to attach the OS disk of that VM as a data disk to another VM, and while you could do that in this case too, there is no supported method for disabling sysprep at that stage of setup.
So while you could attach it to another VM to get data off of it (you would have to remove the VM first), the VHD is no longer in a supported state to use as a VM itself.
Thanks,
Craig

Remote Desktop and Windows XP

Can I use Apple Remote Desktop to connect to my Windows XP machine?

I'm not sure if Apple Remote can, but
Microsoft offers a free program called Remote Desktop Connection so you can do just that.
www.microsoft.com/mac

HT1349 iTunes and Windows 8 will not work!!! Please help!!!

I just purchased a new sony vaio laptop computer with Window's 8 and I have uninstalled and installed itunes over 5 times and it will not work. When attempting to open it, a box pops up that says "ITunes has stopped working: A problems caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.". I have motified the compatibility under each selection, I have changed my securing options and nothing works. I am overwhelmed and frustrated with this issue!! Please help how to make this work, so disappointed with itunes!!!

I have the same problem!

All-In-one Desktop PC Windows 8 Sound not Working

System: HP Omni 27-1210xt Desktop PC Windows 8 64 System is 40 days old. Sound was working last night. Woke up this morning from "Sleep" mode, no sound. What I Did:made sure nothing was muted, tested with a few different applications, no sound.Device manager - device working properlyDevice Manager - updated driverDevice manager - rolled back driverHP Support - installed most recent audio support driver from HP.comHP Support - installed ORIGINAL Audio device driver from HP.comHp Support from another thread - UNINSTALLED the audio device driver, restarted, Windows 8 64 automatically reinstalled. still no sound posting on here for help. Thanks

fixed it. I got to looking on several other threads and discovered some programs gain "exclusive control" of your audio device when they are running, even when they are running in the background. I figured there might be something running in the background, found nothing but went into the speaker setting (clicked on the speaker in the taskbar in the bottom right of the desktop), then clicked on the speaker image which took me to the speaker/audio options, went to "Advanced" and unchecked the 2nd box "Give exclusive mode applications priority". Works like a charm. We will see when I restart/shut down.

PSE 11 and Windows 8: Organizer not working

Hi!
I have installed PSE 11 and PRE 11 on my pc, running windows 8 64 bit. The programs were already running fine for serveral days but suddenly the organizer wont work. As soon as i start the program it starts up and disappers some seconds later. I only can see it in task manager as a process running in the background! When I start the editor first and afterwards the organizer (out from the editor) then the organizer stayes and I'm able to work with. De- and Re-installation already done, several times. Nothing's changed. Pls help! Thx

Try making a direct shortcut for the Organizer and Editor. Make sure you have the correct file path as there is more than one exe file. You can then launch the programs directly from the desktop bypassing the welcome screen. This is generally better as the welcome screen leaves background processes running.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe"
Then click Next; then click Finish
Then make a direct shortcut for the Editor in a similar manner.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files (x86)\Adobe\Photoshop Elements 11\PhotoshopElementsEditor.exe"
Then click Next; then click Finish

ITunes Copy to library and Keep organised settings not working properly.

Hi - I use an external disk array for my library and have always had the preferences for "Copy files to itunes Media folder when adding to library" & "Keep itunes Media folder organised" since I started using iTunes. 99% of the time this works fine. However, I've noticed in the last six months, I need to check it after each import or download to ensure it works.. For example, I have a series pass for a tv show, and episodes 1-15 were in the default path, not my media location, but 16-18 were. I put this down to a glitch, but now have the reverse for a second show, where most of the shows are in my media location but 3 odd episodes are saved to the default path location. Similarly, my music purchases this week have all gone to the default path instead of the path set in the preferences.
I have also found that recent CD imports have random tracks saved to default location..and seemingly ALL podcasts are not being saved in the right place - they ALL go to default path..
Clearly not something that is consistent but also not what I want to happen.
Any ideas?
Thanks
Grant

Hello:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
That resets the iPad. If that does not work, I am afraid it has been damaged by the "water dip."
Barry

Remote desktop ver 3.6.1 not working with OS 10.8.5

Hi All,
I purchased macbook pro 15" retina display, I tried to connect with remote desktop ver 3.6.1 but it showing me black screen only.
Regards,
Fawad.

Hi(Bonjour)!
The HV is designed to shoot mainly in HDV in 1080i. Did you shoot in standard def or HD?
If you've shooted in HDV, check FCE user manual from page 233 in help menu to understand the specific HDV capture process in FCE. The setting that must be used is Apple Intermediate codec 1080i specific to your HV20 model.
Michel Boissonneault

Print to go and Windows 8.1 not working

Recently moved to Windows 8.1.
System on-line and full access to internet.
Select Print to go and when it tries to connect it says that the ptg web page can not be opened.
This heppens when the window to select the playbook device should open
Old XP system PTG is working fine.

I recently purchased a new laptop with Windows 8.1. Judging by all the garbage that came installed on the computer I think the problem is Windows, not the PlayBook. Here is a link to the likely problem that you may be able to correct.
I found a tool cleanup_tool.exe at
.NET Framework Cleanup Tool User's Guide - Aaron Stebner's WebLog - Site Home - MSDN Blogs,
I ran the command
cleanup_tool.exe /q:a /c:"cleanup.exe /p .NET Framework 1.1"
to clean out the mess made by the upgrade to 8.1,

Remote Desktop and Windows Firewall Settings Not Working,

Similar Messages

Maybe you are looking for