Remote Desktop Connection and printing issues

Hi,
I am using Windows 7 on my desktop and also connected to Windows Server 2008 R2 to run applications in Windows Server. However, I noted there is problem with the printer issues. Sometimes, when I tried to print some documents using applications
in Windows Server with my local printer in my room connected to desktop, it won't work.
Moreover, I need to go to Windows Server, Component Service to restart printer spooler so it will work again. This is a pain.
I also noticed there is about 30 seconds wait to process any document to print.
Unlike if I print documents directly from my local desktop computer running Windows 7 and connected to local printer, it only takes seconds to print.
My desktop is connected to Windows Server 2008 via local area network. I should not expect such a significant delay in printing.
I also wonder why printer spooler needs to be restarted when printer is not working.
Can anyone advise me about this? Can Microsoft looks into this problem and release updates to fix the bug to improve the system?
Thanks
Regards,
Clement

Hi,
Please check if you turn on this settings:
You need to set this up just before you connect. The setting will be saved so that you won't need to change it the next time you connect.
1. Open Remote Desktop Connection by clicking the Start button, clicking
All Programs, clicking Accessories, and then clicking
Remote Desktop Connection.
2.Click Options, and then click the Local Resources
tab.
3.Under Local devices and resources, select the Printers check box.
4.Click Connect to start the session.
Make sure that you select your printer in the Print dialog box each time you print.
Karen Hu
TechNet Community Support

Similar Messages

Remote Desktop Connection and iTunes - Won't recognize cd-rom drive

When I connect to my remote server using Remote Desktop Connection in Windows 7 and start iTunes it see the CD-Rom drive, but when I double click on a track in Windows Explorer iTunes opens but it does nothing! Any ideas? Thanks in advance for any and all suggestions.

Okay, apologies for the duplicate thread - I tried searching and didn't see anyone with a similar issue, but now I see a thread down the page with the same issue of the disc not ejecting. I'll try WMP and see if that works any better...

Remote Desktop connection and retina display

I've been trying to set up my new MacBook Pro [with Retina display 2015 edition]. I use a lot of university software via Remote Desktop connection, it worked very well on my Acer laptop. it's really important that that this staff works as good on my new computer. The problem is that when I open the connection on MacBook the display is not great - I can see pixels, just like my grandmas' TV from the 1970s. I tried with different resolution settings, making it bigger or smaller but the display is still not great. Any suggestions or advice would be greatly appreciated.
I've been trying to set up my new MacBook Pro [with Retina display 2015 edition]. I use a lot of university software via Remote Desktop connection, it worked very well on my Acer laptop and it's vital that this staff works as good as on Windows machines.
The problem is that when I open the connection on MacBoook the display is not great - I can see pixels, just like my grandmas' TV from the 1970s. I tried with different resultion settings, still the same.
Any suggestions/help would be much appreciated.
I've been trying to set up my new MacBook Pro [with Retina display 2015 edition]. I use a lot of university software via Remote Desktop connection, it worked very well on my Acer laptop and it's vital that this staff works as good as on Windows machines.
The problem is that when I open the connection on MacBoook the display is not great - I can see pixels, just like my grandmas' TV from the 1970s. I tried with different resultion settings, still the same.
Any suggestions/help would be much appreciated.
I've been trying to set up my new MacBook Pro [with Retina display 2015 edition]. I use a lot of university software via Remote Desktop connection, it worked very well on my Acer laptop and it's vital that this staff works as good as on Windows machines.
The problem is that when I open the connection on MacBoook the display is not great - I can see pixels, just like my grandmas' TV from the 1970s. I tried with different resolution settings, still the same.
I've been trying to set up my new MacBook Pro [with Retina display 2015 edition]. I use a lot of university software via Remote Desktop connection, it worked very well on my Acer laptop and it's vital that this staff works as good as on Windows machines.
The problem is that when I open the connection on MacBoook the display is not great - I can see pixels, just like my grandmas' TV from the 1970s. I tried with different resolution settings, still the same.

Should I assume from your reply that the solution lies with my corporate IT?

Failing remote desktop connection and event id 4005 Winlogon terminates unexpectedly

This is a Windows 2012 Server Datacenter that hosts VMs (Hyper-V) for a development environment. Since a while RDP sessions do not work. the RDP client connects fine, a black screen appears and than closes. At the same time the event id 4005 is logged "winlogon
terminated unexpectedly".
I went through the main sources that appear on a google search nothing applies or works.
The machine is also a domain controller.
Any advise?
Gerhard Waterkamp ACSLA Inc.

Hi,
Thank you for your comment.
As you have commented that you cannot able to see any disk under storage. Can you able to access the disk data easily. Other thing please try to run “diskperf –Y” as an administrator in command prompt and check the result. In addition please check
beneath article.
PerfMon is not collecting LogicalDisk or PhysicalDisk statistics
http://blogs.msdn.com/b/granth/archive/2008/11/07/perfmon-is-not-collecting-logicaldisk-or-physicaldisk-statistics.aspx
Use Resource Monitor to monitor storage performance
http://www.techrepublic.com/blog/the-enterprise-cloud/use-resource-monitor-to-monitor-storage-performance/
Hope it helps!
Thanks,
Dharmesh

L7580 net printer driver disappearing in Win 7-62 after connecting with Remote Desktop Connection

I have an Officejet Pro L7580 connected via ethernet. I've been using the driver released from Jan 2010, and whenever I connect to my Windows 7 Ultimate 64 computer via Remote Desktop Connection, the printer drivers for both the printer and the fax disappear. I have to constantly run the "add a device" window to add the printers back again.
Why do they disappear like that?
Fishanderson

OK after updating the Server and clients I am still having this issue :(
and just today after no sound problems for 6 days the sound dropped out on a couple of RDP sessions, yet the sound on the client itself worked fine when tested (minimise the RDP session).
It took the RDP sessions to be restarted to restore the sound within the session.
I have found similar (old) thread regarding this problem:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/958fd891-6f55-432b-8268-a326ac6b2b2e/sound-in-remote-desktop-session-stops-working
but no one has informed about if as solution was ever found.

Dymo Labelwriter printers not working via Mac Remote Desktop connection into Windows Server 2008

I'm having a really hard time getting Dymo labelwriters (models 335 turbo and 450 turbo) to work over a remote desktop connection and I'd appreciate any help you can offer.
To briefly describe the situation, I'm working for a Doctor's office, moving their IT from a remotely-hosted environment where employees connect to their Windows Server 2008 virtual machines (hosted off-site) via Windows 7 machines through Microsoft's remote
desktop software.
The new setup will have new servers running in-house instead of remotely and will be based on Apple's Mac Mini machines running Windows 7 for some tasks through Parallels virtualization
software running directly on each employee's Mac Mini.
We have 3 of the Dymo 450 Turbo products and one 330 Turbo, each connected directly to a Mac Mini.
Here's the problem: I have Microsoft's Remote Desktop software running on the Macs natively, connected to each employee's virtual machine on the remote server for now, until the time comes to make the switch to using the new in-house server. The remote desktop
software works fine - employees are able to connect successfully and access their desktops fine. I have the "Forward Printing Devices" option checked in the Microsoft Remote Desktop app so that the hosted virtual desktops can see the local labelwriters.
However, the Dymo Label software running on the remote server will not recognize that a labelwriter is present.
If I go to the Printers and Devices window on the remote server, the labelwriter shows up fine, named "dymo labelwriter 450 turbo (redirected 10)" however running the Dymo Label software gives an error, "Dymo label says no printer connected:
dymo label printer requires a dymo label printer be installed and connected ..."
To try and narrow down the cause of the problem, on the same Mac, I ran Windows 7 via Parallels and set up a new remote desktop connection within that Windows VM. Just to be clear, instead of using the RDC software running in the Mac OS, this new connection
is using a Windows virtual machine running on the same Mac, with the RDC being established from within that Windows VM. Again, I forward printing devices and the labelwriter shows up in Printers and Devices on the remote server as "dymo labelwriter 450
turbo (redirected 10)" This time, the Dymo Label software recognizes the attached labelwriter and runs fine.
I'd appreciate any advice you can give on why, as far as the remote server is concerned, a forwarded labelwriter from Microsoft remote desktop running natively on a Mac isn't recognized
but it is if forwarded from within Windows, bearing in mind that the labelwriter shows up on the remote server in both instances and is called the same name in devices and printers.
Sorry for the long-winded question. I hope you can help me.

Hi,
Thank you for posting in Windows Server Forum.
Firstly please check whether you have driver capable for your printer with MAC MRD. Also I would like you to check with updated MRD version 8.0.9 for MAC OSX.
https://itunes.apple.com/in/app/microsoft-remote-desktop/id715768417?mt=12
Because as you have commented it can work with windows RDP, so please also try to contact Dymo Labelwriter printer and inquire regarding the issue.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

i have still facing same problem in last two week in my system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not in my system use the command netstat -a -o command in
command prompt but this is my bad luck its not woking in my machine after i have decide to change RDC listening port via registry i have change it 3389 to 3391 after restart my system, and
after again testing using same command but no any change again rdc not listening . After i have search this issue on search engine google bing and microsoft , i have found more solutions but i have try one
uninstalled two microsoft updates first is kb KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
any version computer running , i have try three and four time enable disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
stinger tools to scan my machine to remove virus but stinger is not found any thread in system. ihave already run this command in my system sfc /scannow Please Can you help me to fix this issue.

Hi,
When you try to start the Remote Destop Connection, what errors it showed out?
Could the other PCs connect this PC with the RDC?
So you have read this blog?
RDP connections might fail due to a problem with KB2621440 - MS12-020
Did you reinstalled the KB2621440?
Besides, did you follow this guide to enable the RDC connection?
Connect to another computer using Remote Desktop Connection
And also this guide?
Why can’t I connect using Remote Desktop Connection?
Please take a check with those settings again.
Best regards
Michael Shao
TechNet Community Support

Remote Desktop Connection on PowerBook, not x86 iMac

My office uses SBS2003 with VPN enabled.
Without VPN, on my PowerBook & the intel-iMac, I can "Remote Desktop Connection" into the server, then subsequently into a workstation through the server.
With the VPN connected, I can use RDC to connect directly to my workstation (say, unit01).
With VPN connected, the iMac can't connect directly to the workstation, yet it can still go through the server to the workstation as usual.
I'm suspecting this is an issue with Rosetta emulating Microsoft's Remote Desktop Connection and not allowing the domain name to be recognized through the VPN.
Both computers are using the exact same settings for the VPN and attempting to use RDC exactly the same.

i've been using just the netbios name, simply because it works on my powerbook. I still don't understand why it wouldn't work on this intel-mac.
I was mainly following this guide:
http://www.smallbizserver.net/Default.aspx?tabid=266&articleType=ArticleView&art icleId=84

Remote Desktop Connection with WRT54G from Novice

Well, I’m usually pretty good at using Google and forums to eventually figure out how to fix my problem but this one absolutely has me stumped and I’m hoping someone out there has an answer for me. For the record, I have probably a beginner/intermediate knowledge of computers so if you know the answer to my problem, try to explain it simply! ****TO ANYONE WHO TAKES THE TIME TO READ THIS THING AND CAN OFFER SOME ADVICE-THANK YOU!!!!***
THE PROBLEM
I would like to be able to use Remote Desktop to log into either of my home computers from basically any computer on the internet.
THE SETUP
I have two computers, whose names are LAPTOP and DESKTOP that are both running Windows Vista Ultimate. Both of the computers are connected to a Linksys WRt54G Router ; one wired, the other wirelessly. The Linksys router is then connected to a Westell DSL Modem that connects to AT&T’s internet service.
SETTINGS
My DSL service only provides me with a dynamic IP address so I signed up with no-ip.com. Through that site, I bought a domain name and downloaded their small program that runs in the background of my desktop computer. The program checks what my IP address is every couple of seconds and if it changes, it notifies their server so that anyone who types in my domain name is directed to the new IP address.
ROUTER (Firmware 4.20.6)
Basic Setup Page: The Router Name is just the model number, the Server Name is my DSL provider and the Domain Name is the name I chose and registered with No-IP.com. (www.mydomainname.com, for example.) DHCP Server is ENABLED. DDNS Service is DISABLED. Under Advanced Routing, it is set in GATEWAY mode.
Security Page: Firewall Protection is ENABLED. Block Anonymous Internet Requests is NOT checked. Filter Multicast, Filter Internet NAT Redirection and Filter IDENT ARE checked.
Applications and Gaming Page: I chose two port numbers, one for each computer that I want to connect to. On the first line, I have Application: RDP, Port Range: 49200 to 49200, Protocol: Both, IP Address (The IP address of the computer I want to connect to) and the Enable box IS checked. [I did the same thing with the second line for the other computer, but with a different port number and that computer’s IP address)
Administration Page: Access Server is HTTP, Wireless Access Web is ENABLED, Remote Management is ENABLED through Port 8080, and UPnP is ENABLED.
WINDOWS VISTA SETTINGS
First, I went to the Remote Desktop Settings of the target computer and ENABLED Remote Desktop Connection and allowed computers running any version of Windows. I also confirmed that the box labeled “Allow This Computer To Be Controlled Remotely” WAS checked. I then made sure that I had a user name, it had a password associated and that it had Administrator priveledges. I went back to the Remote Connections screen and added the user name as being allowed to connect. (I think this is redundant since it’s both the owner of the computer and has Administrator Status.)
Next, per Randomly Googled Internet Advice, I went into the registry and changed the port number that Remote Desktop listens for incoming connections to Port 49200 to match the router settings. [Registry Entry that I modified was: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp]
Finally, I went to the Windows Firewall and Added (opened) port 49200 for use as a Remote Connection. I kept the protocol as TCP and confirmed the scope was set for Any Computer.
CURRENT STATUS
If I go to Explorer and enter my IP address with a colon and the specify port 8080, I can get the login screen for the router. Same thing happens if I just enter my domain name and port 8080. However, if I switch the 8080 port and use one of the ports I chose (49200), it cannot connect, either using the Public IP address or the domain name. (I’m trying to connect using a wireless card and not connected to my local network so I know it’s the same as if I was anywhere else.)
I’m not sure why it won’t let me connect; it feels like the router will not allow the connection to pass through it to the port I’m asking it to forward to. I’m guessing someone out there who took the time to read it is shaking their head at all the information I provided and knows the one dumb thing I missed!
Thanks again!

I'm attempting to do the same thing with my home network. the only differences are that i have cable internet from comcast and i'm running vista business. my router is the wrt54gs. i'm assuming that the web page is similar for adjustmants. To be honest i cannot figure out how to do a remote destop too. so i went to www.logmein.com and installed the program. once installed to to every computer you want to have access too and log into the website. then click on the add computer icom. full control app sharing etc... even better when you connect you have the option to deactivate the local host mouse and screen to prevent anyone seeing what your doing.
If you resolve the router issue would you let me know. plz thanks
Forest

Remote Desktop Connection fails

I have a new Server 2012 R2 essentials install. I have tried connecting with remote desktop connection but have no success.
I can connect to the server at the local desktop. From any other computer on the network it fails.
I have checked a plethora of things I found on the internet but with no luck.
I have tried to connect by ip address, no luck.
I can ping the server just fine.
I cant find anything of help in the event viewer logs.
Any help appreciated.

Did you get any error message when failed to connect the server via remote desktop connection? Please use an administrator account to connect the server via remote desktop connection and check if the same issue still exist.
Remote Desktop goes to: Initiating connection for about 15 seconds, then I get:
Remote Desktop cannot connect to the remote computer for one of these reasons:
1. Remote access to the severe is not enabled.
2. The remote computer is turned off.
3. The remote computer is not available on the network.
In the Windows Server 2012 R2 Essentials, please follow the path: Control Panel-> System-> Change settings-> System Properties-> Remote and check if select "Allow remote connections to this computer" option.
I checked, it was already set.
In addition, please also open Group Policy Editor and follow the path: Computer Configuration-> Windows Settings-> Security Settings-> Local Policies-> User Right Assignment-> Allow log on through Remote Desktop Services. Add that correct
user or group, then check if this issue still exist.
I checked, it was already set.

REMOTE DESKTOP CONNECTION (Questions For Experts)

Q1) Is it possible to connect remotely to a computer even if the user is in one country and computer is in another (without internet? If Yes Please tell HOW.
Q2) Is it possible to use hardware like printer while in remote connection with a tab or lets say I am connected with a tablet which has a USB port so if I connect a USB in my TAB will it work for the remote
desktop? (usb connected to the tab but should work as if its connected to remote computer -any possibility) If Yes Please Tell how to implement.
Q3) For ex. If I am connected to a remote computer and since my computer is not good for gaming and I want to use the remote computer to play games while the DVD is in my physical computer.....Is there any possibility
FINAL QUESTION : Can I connect to windows with an android or IOS devices without internet (PLEASE TELL HOW IF POSSIBLE) and I want to use my local Internet is the remote computer.
Friends whosoever has any knowledge regarding any question please answer me, help required. I will be really thankful to you .

A1- its possible to establish a remote desktop connection even if the user and remote computer in differerent countries but NOT possible without internet coonection... as you will have to use public ip of remote computer.
A2- To redirect devices and resources
Open Remote Desktop Connection by clicking the Start button , In the search box, type Remote
Desktop Connection, and then, in the list of results, click Remote Desktop Connection.
Click Options, and then click the Local
Resources tab.
Under Local devices and resources, select the devices or resources you want to redirect.
To see additional devices, or to redirect Plug and Play devices or drives and devices that you plug in later, click More.
To redirect supported Plug and Play devices, under Local devices and resources, double-click Other
supported Plug and Play (PnP) devices.
The Plug and Play devices that support redirection and are currently plugged in appear in this list.
To redirect supported USB devices, under Local devices and resources, double-click Other
supported RemoteFX USB devices. The USB devices that support redirection and are currently plugged in appear in this list.
Select the check box next to each device that you want to redirect.
To automatically redirect drives or devices that you plug in or connect to in the future, under Local devices and
resources, double-click Drives, and then click Drives
that I plug in later.
– or –
Double-click Other supported Plug and Play (PnP) devices, and then click Devices
that I plug in later.
A3 - not possible to mountDVD drive on remote desktop.
Yes you can establish remote desktop connection from android... there is an app called, Microsoft Remote desktop app, its very good , ı use it myself too...

HP LaserJet Pro MFP M127fn and Remote Desktop Connection

So, my pc operates on Win7-64bit. I use Remote Desktop Connection to log in to the company server, running on MS Server 2008. I purchased the HP MFP M127fn today after confirming that it is compatible with both OS listed above. I successfully installed it directly to the server via usb cord - to make sure the correct drivers downloaded to the server. I was able to test-print and print from an app while physically connected to the server. I then disconnected the printer from the server and successfully connected it to my local pc. I can test-print and print from an app on my desktop. When connect to the server via RDC, it recognizes the MFP M127fn as my default printer, and sends a print job to my local pc. I can see the job in the server print queue, I can see the print job in queue on my desktop....it spools, then says it prints, however no actual print job ever materializes.
If I select to print to the MFP M127fn fax from the server, it will open the fax window on my desktop, allow me to enter a phone number, and will dial out and send the fax. So, that driver is functioning properly.
So, my question is this: If the printer and fax claim to be successfully installed, why do I not get the print job that is sent via the server and appears in my local print queue? I get no error, either on the server side or the local desktop. They both truly think the job has printed.....but no paper ever comes out.
Our company has used several other HP printers over the years with this same set-up and have never had a problem until now. The last one was also an HP MFP - the CM1312. So, I am now completely stumped by this. I called HP support and was routed through 4 different areas before I was told that no one had a clue what the problem might be. I then called the Easy-Tech desk at Staples, where I bought the printer, and was told that it was most-likely a hardware issue and I should return the printer to swap it out for another one. If nothing would print at all, I would agree it's hardware. But, as I can print locally, I'm more-inclined to think it's driver-related......any suggestions?

Hi,
The M127fn uses the PCLmS printing language which is a lightweight printing language, a such is not supported for RDP printing.
As a reference you may find the following socument about Citrix, Terminal Services and RDP Printing, as you may find listed the M127 is not supported for a such:
http://h20195.www2.hp.com/v2/GetDocument.aspx?docname=4aa0-8465enw&404m=secure-erc
That is clearly not an harware issue, however I suggest returning the printer and replacing it with a different model which better feet such a task.
The M225dn as an example uses a PCL 6 print driver and should provide a better feet for RDP printing using HP UPD.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

"remote desktop connection has stopped working" When printing from remote desktop connection

I have been having a issue when using a windows 7 machine. I have Remote Desktop to a session on Windows2008 R2, I am using the local printer resources to redirect the printing. However everytime i try to print it crashes the remote desktop application.
Gives me "remote desktop connection has stopped working." I have 4 other computers connected and printing with no issues what so ever. This only happens when i print. It does print by the way just the application crashes.
-I have also updated the printer drivers to newest possible thru the manufactorer website. The printer is a Brother MFC-8890DW. Windows 2008 R2 is up to date for the RDS server. 3 other machines are able to Remote in and print. The user is able to print using
diffrent machines just not the Windows 7 machine.

Hi,
Happy to hear that you resolved your issue. For another issue which you are facing here trying to provide some suggestion.
As you have commented that you are facing issue with second screen resolution on wide screen. The setting which I am suggesting can only applies when you are using multi-monitor Remote Desktop connections. If you are making Connections using a single
monitor do not use this setting.
So for this you can try to apply “Limit maximum display resolution” setting in group policy, where you can mention the width & height for the screen to display. The setting can be applied on below mentioned
path.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Remote Session Environment
Meanwhile sharing article with you for more information.
Remote Session Environment
http://technet.microsoft.com/en-us/library/ee791847(v=ws.10).aspx
Hope it helps!
Thanks.

I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
Narmin

I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

VPN and Remote Desktop Connection

I have a standalone windows 2012 server that runs a domain with a few workstations. I have successfully configured a PPTP VPN and can connect using a Windows 7 computer at home. Once connected to the VPN, I can Remote Desktop to the server - but not any
other computers. The computer I'm trying to connect to runs Windows 7 and has remote desktop connections enabled.
Under the Access Details in the Remote Access Management the VPN connection is shown correctly first to the router (x.x.x.1) then the server (x.x.x.2) under Protocol 17 and Port 53. Then the server is shown again under Protocol 17 and Port 3389, which must
be the Remote Desktop connection. And then the workstation on the domain (x.x.x.20) also shows a connection with Protocol 17 and Port 3389. However, the remote desktop connection fails everytime. I'm not sure where the issue exists since it appears the server
is seeing and acknowledging the remote desktop connection. On my router I have PPTP passthrough enabled and port forward 3389 to the server.
I have attempted to use the workstations internal IP address as well as the computer name (workstation and workstation.domain.local) when connecting.
Thanks for your help.
I just noticed these three event errors on the destination remote machine. Not sure why it's trying to use L2TP?
Failed to apply IP Security on port VPN2-1 because of error: A certificate could not be found. Connections that use the L2TP protocol over IPSec require the installation of a machine certificate, also known as a computer certificate.. No calls
will be accepted to this port.
A certificate could not be found. Connections that use the L2TP protocol over IPsec require the installation of a machine certificate, also known as a computer certificate. No L2TP calls will be accepted.
The Secure Socket Tunneling Protocol service either could not read the SHA256 certificate hash from the registry or the data is invalid. To be valid, the SHA256 certificate hash must be of type REG_BINARY and 32 bytes in length. SSTP might not be able to
retrieve the value from the registry due to some other system failure. The detailed error message is provided below. SSTP connections will not be accepted on this server. Correct the problem and try again.

Morning Trent,
I don't know if this is still an issue for you, did you get it solved?
If not, check on the server whether the user credentials that you're using to RDP to the workstation are actually authorised server-side. If that checks out, on the VPN connection you can specify a protocol to use. Specify the protocol that your VPN is configured
to use on the server.

Remote Desktop Connection and printing issues

Similar Messages

Maybe you are looking for