Remote Desktop Consuming ALL System Memory

Folks, I have a Windows 7 enterprise machine through which i RDP to another desktop on the same floor as mine, which ends up freezing my machine untill i donot close out the RDP program from Task Manager.
On checking from the Process tab i see that MSTSC.exe process is consuming almost all of the 8GB of memory i have on my machine. When i kill the present RDP session and start a new one, it starts consuming memory from MBs and reaches to GBs almost
all memory capacity.
I have replaced my machine with a new rebuilt machine alltogether, but still is the same issue.
I have also changed the Experience setting and optimised the session settings for RDP but no good.
Please suggest as it is hampering my day to day work.

Hi,
I suggest we first run Xperf tool to take a look for the high memory usage:
WPT: WPR/Xperf: Capture high cpu, disk i/o,
file, registry, networking, Private bytes, Virtual bytes, Paged Pool/Nonpaged pool and/or application slowness.
Similar threads suggested that the high usage caused by MSTSC.exe is some printer related issues, please take a check with your printer configuration and the printer drivers.
Here;
here.
In addition, please also take a look at this KB article:
High CPU utilization by the Svchost.exe process and the Lsm.exe process in the Remote Desktop session after you remotely connect to a computer that is running Windows 7 or Windows Server 2008
R2
Best regards
Michael Shao
TechNet Community Support

Similar Messages

  • Safari Web Content consuming all my memory

    I'm having a problem with Safari Web Content.
    I've jst re-loaded Mountain Lion in a brute forcve attempt to resolve my issue, but it's still occurring.
    The issue is:  with very little running, if I run Safari and bounce around a few websites, I can easily consume all my memory.  I end up with this:
    As you see, Active memory is too high (before this test I had Mail open, and Avtive memory was about 2GBm what you might expect normally).
    Actibve memory had actually peaked at about 3/4 of the total, but then some must have got swapped out to Inactive.....giving us the picture above.
    But look at the Real Mem occupied by Safai Web Content!  That can't be right, surely.
    Nevertheless, I'm led to believe that OSX's memory management algorithm's will swap out Inactive for Free when it is required....well, this isn't happening.  I saw Free memory down to 7MB at one point, not a typo.  Everything grinds to a halt.
    If I am patient, and try to Quit Safari, I end up back here:
    Clearly showing that if I manage to kill Safari, the memory gets freed up again.
    I understand why OSX wants to handle memory with the Inactive concept - "you've just closed Word, but maybe you'll open it again in the next ten minutes so we'll leave it in memory, inactive, so when you try and open it, it will open really quickly".  Right now, I'd rather turn that freature off and have memory behave more primitively and take the hit on re-opening.
    As I mentioned, I reloaded OSX Mountain Lion and the problem persists.  When you re-load or upgrade your OS, there are many configuration settings (desktop, mail, safari) that are kept so that the upgrade looks seamless;  clearly whatever is corrupting me here has been kept also.  For that reason I'm loathe to go to Mavericks, because I presume the same corruption would exist (and also I hear Mavericks is still a bit shaky with the native Mail app).
    What config type files should I look to safely delete and have the OS rebuild?  Any ideas?

    OK, so I tried a Safe Boot.  It wired 5GB of memory, and for a while I thought what was left would behave itself, but within about 10 minutes I consumed everything again.
    Here's the before:
    And here's 10 minutes later, after bouncing around a few websites:
    I also tried firing up Safari, going to Facebook, and letting it sit for a while.  No effect.
    So, the problem occurs when visiting multiple sites - memory isn't getting released properly.
    I think I'm left with a move to Mavericks.

  • Do I have to buy remote desktop for all the computers I want to access?

    I am trying to figure out if when I download the Remote Desktop for my laptop how do I then connect to my studio PC. Do I need to pay th 79 dollars again to hav the app running on the other computer?

    You only install the Apple Remote Desktop app on a computer from which you want to do the controlling and management. You don't install it on the client systems. But the license for apps from the Mac App Store say that for personal use, you can install an app on all computers you own or control.
    Note that if by "studio PC: you mean that your other computer is a Windows system, ARD won't install on it in any case, and won't even control it without you installing VNC on the Windows system.
    Regards.

  • Mac Version 8.0.12 (Build 25282) of Remote Desktop deletes all connection and gateway settings on startup

    Hello,
    I have a frustrating issue with MRD for Mac Version 8.0.12 (Build 25282). The application was interrupted while updating a few days ago and started throwing errors when I attempted to launch it. I deleted the app using Launchpad and reinstalled via the App
    Store. Ever since the initial reinstall (and subsequent ones) the app will pop the "What's New?" version update window (even if I select the "Don't show this again" checkbox) and all of my saved settings are missing.
    I would like to clear out all app data and try reinstalling but I can't find where MRD stores data on my system. Any suggestions on how to fix this problem would be much appreciated.
    Thanks,
    Eric C.

    Hi Eric,
    Thank you for posting in Windows Server Forum.
    So from your description it seems that your remote desktop (MRD) is working fine but facing issue that can’t store the related setting (cache issue). So you can check whether you have any related logs from MAC MRD which give us any light for further research.
    Microsoft Remote Desktop>About Microsoft Remote Desktop>Send log via email
    Or you can refer this link
    for apple support or ask your question to apple support forum. 
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Remote Desktop and Doing System / Software Updates

    I am new to Remote Desktop.  I am starting to use it daily in my class room to share things with students and lock screens, etc.  Is there an easy way to do system updates and software updates (adobe flash player, java, etc.) without having to manually log in to each machine?  I have to believe there is a better way...could someone point me in the right direction?  Thanks!

    Oh, my version of Remote Desktop is 3.7.2

  • Why does AE CS4 consume all my memory when running a preview?

    I have Windows Vista x64 with 4Gb of RAM but everytime i want to make a RAM PREVIEW the program does not release the memory in use. For example: I start with AE CS4 using 2gb of ram, then i make a preview and it reaches to 3gb of ram. If I continue making previews it comes a time when all hangs up becouse i have no more memory left!
    I remember from previous versions of After Effects that the "green bar" over the timeline, when you were lack off memory, it started to move at some point and the older rendered frames start to disapear in order to render the new ones, making the lenght of the green bar as long as possible but without taking out ALL your memory.
    I've found in Premiere CS4 an option that says: Optimize Rendering for Memory/Performance. This help me out with the same issue in Premiere, but I can't find anything like this en After Effects.
    Any suggestions?

    Take a look at the memory and cache settings. Try increasing the amount of memory to leave for other applications. Also, MP4, due to it being long-GOP, does require a higher memory footprint to decode than some of the other formats. AE is designed to use as much ram as you tell it when doing a RAM preview. Depending what else you have running on your system, our defaults may be too much.
    For instance Internet Explorer is taking 100 MB just to show this page. If you launch task manager, you'll need to add the Working Set column to get an idea of how much RAM something needs.
    --chris

  • Using XP Pro's Remote Desktop for multiple systems behind my Linksys WRT54G

    I would like to be able to use Windows XP Pro's "Remote Desktop" application to access more than one system behind my WRT54G router.
    I understand that I need to use Port Forwarding on the router to do this, but how can I set it up to enable access to any of the 4 systems that are behind it?
    Thx in advance

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp
    look for the entry "PortNumber", this will be a hexidecimal entry, so you will have to click decimal when you edit it, save to the new RDP connection port you want, say 3390 for machine 2, 3391 for machine 3, and so on, and reboot for it to take effect.
    Then to connect to it from the RDP client (once you make the forwarding entries in your router of course), it's just whateverIP-DNSname: port in the connection window.Message Edited by Wayne613 on 02-23-200708:06 PM
    Buffalo WHR-HP-G54 (openwrt firmware)
    Linksys 600n
    QNAP TS-639 NAS

  • Image Capture Extension consuming all the memory

    I have a Macbook Pro from 2011 with OS X Yosemite, Iphoto 9.6 and Aperture 3.6.  I always work with Aperture for my pictures.  But since last weekend it works extremely slow. When I check the Activity Monitor I see that there is something like "Image Capture Extension" consuming a lot of memory and also Kernel_task.
    When I force quit "Image Capture Extension", Aperture starts up but still extremely slow.  Is this a hardware issue?  Should I reinstall Aperture?
    I think this started after I tried to work in Iphoto again (after long time) to order a photobook before Aperture and Iphoto will close.  I had issues with ordering the photobook (see other discussion of me).

    Here is the report from EtherCheck, I have been able to remove some Adware via AdwareMedic but it seems there is still some there,
    Also the startup items I cannot remove via Accounts.
    For the rest everything looks quite OK, no?
    EtreCheck version: 2.1.8 (121)
    Report generated 11 March 2015 9:00:28 pm AEST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Click the [Adware! - Remove] links for help removing adware.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 574
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:3:29
    Disk Information: ℹ️
        Hitachi HTS545032B9A302 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (32.07 GB free)
                Core Storage: disk0s2 319.21 GB Online
        OPTIARC DVD RW AD-5970H 
    USB Information: ℹ️
        Western Digital My Passport 0820 2 TB
            EFI (disk2s1) <not mounted> : 210 MB
            WD 2TB RED (disk2s2) /Volumes/WD 2TB RED : 2.00 TB (1.56 TB free)
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Adware: ℹ️
        Geneio [Adware! - Remove]
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.nike.sportwatch (1.0.0) [Click for support]
        [not loaded]    net.Thomson.iokit.USBLAN_usbpart (1.6.0) [Click for support]
    Startup Items: ℹ️
        HWNetMgr: Path: /Library/StartupItems/HWNetMgr
        HWPortDetect: Path: /Library/StartupItems/HWPortDetect
        Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_desktop.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_service.plist [Click for support]
        [loaded]    net.sourceforge.MonolingualHelper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        None
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Unity Web Player: Version: UnityPlayer version 4.6.0f2 - SDK 10.6 [Click for support]
        Google Earth Web Plug-in: Version: 6.0 [Click for support]
        googletalkbrowserplugin: Version: 2.0.4.2108 - SDK 10.5 [Click for support]
        npgtpo3dautoplugin: Version: 0.1.43.7 [Click for support]
        Silverlight: Version: 4.0.60310.0 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        GoPro  [Click for support]
        Growl  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 318.84 GB Disk used: 286.77 GB
        Destinations:
            WD Harddrive Ann [Local]
            Total size: 499.94 GB
            Total number of backups: 2
            Oldest backup: 2014-11-30 04:03:53 +0000
            Last backup: 2015-03-03 15:01:32 +0000
            Size of backup disk: Too small
                Backup size 499.94 GB < (Disk used 286.77 GB X 3)
    Top Processes by CPU: ℹ️
             9%    mds
             6%    WindowServer
             4%    mds_stores
             1%    mtmd
             0%    SystemUIServer
    Top Processes by Memory: ℹ️
        159 MB    mds_stores
        69 MB    ocspd
        60 MB    WindowServer
        43 MB    Dock
        30 MB    Finder
    Virtual Memory Information: ℹ️
        1.68 GB    Free RAM
        1.20 GB    Active RAM
        384 MB    Inactive RAM
        1.03 GB    Wired RAM
        948 MB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 11, 2015, 08:55:40 PM    Self test - passed
        Mar 11, 2015, 05:13:17 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/iPhoto_2015-03-11-171317_[reda cted].crash

  • Application unicode Consumes all server memory.

    Hello,
    I have a server essbase mounted on a W2K8 64bit VM with 16GB of memory, and I have two applications unicode when I run an application on the restructuring of my outline and my calculations it consumes me all 24GB of RAM.
    Someone you an idea how limited memory implementation unicode

    someone you have an idea ?

  • PXI-SCXI in Linux running LV 8.0.1 consuming all available memory

    Hi, we have the following environment here:
    Software
    - Mandriva 2006 PowerPack
    - LabView 8.0 with update 8.0.1 for Linux
    - DAQmx 8.0
    - DAQmx base 2.0
    Hardware
    CHASSIS  PXI-1011: PXI-8176, 512Mb RAM, 6052e, SCXI-1129 (we are using 7 of them), BORNES SCXI 1129: 1335,  matrix topology 8x32
     LV program
    Two analogic acquisition tasks created and cleared in a non-simultaneous way (one for rotation measurements, and the other for vibration measurements), and a switching task, in a total of 54 sensors.
    Here goes the history:
    After struggling (togheter with some NI folks) to configure this environment in Linux, now we have a different problem: In a matter of days our application eats all the available memory (swap and RAM) and freezes the PXI-SCXI.
    We have already checked:
    - (phisical) memories
    - all start-clear/stop threads (including different combinations of stop AND clear and only clear)
    - isolated our algorithm;
    - isolated all local variables and arrays (no global variables);
    - isolated all database related code.
    In the end, after having only the acquisition tasks running, the LV process still eating aproximatelly 1Mb of RAM per minute, if we use a 1minute window for complete switch-loop and acquisition-loop.
    We would like to know if there is some known workaround or upgrade that we are supposed to do to solve this problem.
    Thanks in advance for all contributions,
    Message Edited by ratem on 08-09-2007 05:34 PM

    Hi Ratem,
    Memory leaks is a little difficult to debug. I can see you have already done some procedures to isolate the problem. The tests indicate that the acquisition code is consuming the memory. It is possible if you are leaving some tasks open (in memory). All tasks opened must be closed to deallocate the reserved memory.
    There are others possibilities to the memory problem. The linux itself can be the problem. Are you sure the memory leaks are only observed when the LV program runs? If it's the case, I will suggest you to do a simple vi, a while loop with a timing function. Does this simple program show the same behavior?
    Best Regards,
    Alisson Kokot
    NI BRAZIL

  • Remote Desktop Services: corrupt system database, how to remove and start again?

    Hi. This is my first Windows Server 2012 R2 installation, and I have a made a small mess. I'd be very grateful for any assistance in sorting it out.
    I had some problems which I eventually tracked down to an incorrectly installed SSL certificate, but during my diagnostics, I foolishly deleted a row from a system table, thinking that if it messed up, I could always reinsert the row. Forgetting of course
    that I couldn't recreate the ID of the original record because it's an auto-ID field. So I realise I'm an idiot.
    I logged in to SQL server using:
    \\.\pipe\MICROSOFT##WID\tsql\query
    and deleted a row from:
    Databases/RDCms/Tables/rds.Target
    and from:
    Databases/RDCms/Tables/rds.Pool
    Predictably enough, the database is no longer coherent and RDWeb is not working properly, and I need to remove RDS and reinstall it.
    I thought that removing the RDS server role and adding it again would do it, but the erroneous data is still there.
    How can I get rid of it and start from a clean slate?
    Thank you in advance for any help.
    Stan

    Hi Stan,
    Thank you for your posting in Windows Server Forum.
    Can you let us know the specific error you are facing?
    In addition, you can try to use below powershell command to remove the rds role.
    Parameter Set: Default
    Remove-RDServer [-Server] <String> [-Role] <String> [[-ConnectionBroker] <String> ] [-Force] [ <CommonParameters>]
    Remove-RDServer
    In addition, you can refer this thread
    for reference. Also check "Disaster recovery options for the RD Connection Broker
    2012 (HA)" article.
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Photoshop CS4 Consumes All My Memory

    I have 31 free gigabytes of space on my MacBook and no other applications open. When I open up a file file on Photoshop CS4 (81MB) my computer's memory drops from 31 gigs to less than 1 gig. When I try to move a layer in Photoshop, I get an error that says my Scratch Disk is full, and soon thereafter, an error message that my Startup Disk is full. This has never happened before. What is going on? I can edit this file any longer.

    Remember that the size of the file on disk is compressed, and the data in memory may be much larger.
    It sounds like that file expands to something over 30 gig, and you don't have enough disk space available to edit that file.
    Photoshop will allocate RAM up to the limit you set in preferences, as needed for the images you are editing. And Photoshop will allocate scratch disk space as needed for the images (which can exceed the amount in RAM, by a lot).
    And be careful, because MacOS gets really flakey when the startup disk runs out of space.

  • Remote Desktop Settings missing from Remote Tab of System Settings

    My Screen:
    What it should be:
    Good day, all. Please I need urgent help here. I have a problem using Remote Desktop.
    My system is a 64-bit Windows 7 Ultimate with SP1 preinstalled.
    Let me give us a synopsis of the problem.
    Since the system was purchased, I have never had to remote into it. But I have used it to remote desktop to other PCs (that is, I have never used
    it has a host, only as a client). However, last week I decided to set it up so that I can remotely connect to it. I went to the Remote Tab in System settings, and I discovered the bottom half was missing - only Remote Invitation settings were displayed.
    I searched the web to try to solve the problem myself. I could only come up with 2 causes, generally:
    If the system is Home Premium or below, which is certainly not the case here. It is the Ultimate version I have.
    Some people complained that they had the exactly the same problem after installing SP1, and that when they uninstalled it, the Remote Desktop settings in Remote Tab of System settings came back.
    However, I can't uninstall SP1 since it came preinstalled, and then that is not an option for me, given it contains several security fixes and updates.
    Also some people said
    the problem was solved be re-entering a correct product key for Windows, and re-activating Windows (+reboot).
    I have tried this but did not get the required help.
    My system is fully updated with all Microsoft patches till date, which means I have RDP 8.0 and RDP 8.1 client installed.
    I have also tried
    re-registering the dll: (regsvr32 c:\windows\system32\remotepg.dll),
    to no avail.
    I have checked the registry settings, Windows Firewall and made sure the remote desktop services are running in services.msc.
    All these I have tried.
    As I said, I have no problem connecting as a client to other systems. The issue is connecting to this system, by setting RDP here, but the settings
    are missing.
    Please, what is the solution? I don't want a clean install, or anything that would require to start re-updating the system.
    I prefer a direct tackle of this error
    (Definitely, a windows component is corrupted).
    Thank you very much, and God bless.
    P.S: I have read ALL the other threads that are similar to this, but NONE of them has SOLVED my problem.
    So, please, please, do not delete my thread or mark it as answered until this problem has been solved, please.
    I need a WORKING SOLUTION to this please.
    Once again, thanks and God bless.

    Hi,
    Let’s uninstall the RDP 8.0 first, then check the result:
    wusa.exe /uninstall /kb: 2592687
    It would roll back to RDP 7.0.
    Also, run SFC command:
    Use the System File Checker tool to repair missing or corrupted system files
    http://support.microsoft.com/kb/929833
    Alex Zhao
    TechNet Community Support

  • Does Apple Remote Desktop control only one specified local account or could you, say, make it able to manage all network accounts?

    When you set up Remote Desktop, is it possible to set up Remote Desktop for ALL network accounts on that computer instead of enabling it for each network account.

    If I understood this straight, yes, you can control any user logged in a client computer, doesn't matter which login/pass you used to first connect. In other words, if you added a computer by the user "Jonh" you can still control remotely the same computer even if "Mary" is logged at the moment.
    Hope it helped

  • Remote desktop policy works on Windows 7, but not on Windows 8

    Hey all,
               We have a mixed environment of Windows 7 and Windows 8.1 machines.
    Our standard policy enables remote desktop on all machines (and another part of the policy sets the groups allowed to remote access).
    On windows 7, we are able to RDP to all machines
    On windows 8.1, remote clients cannot connect, with a timeout error. This occurs from other Windows 7 or Windows 8 machines.
    I have confirmed:
    - The policy has applied (by looking in the registry under HKLM\software\policies\Microsoft\windowsNT\Terminal services)
    - The windows firewall is letting the RDP traffic through (and the issue still occurs if the firewall is off)
    - The group policy templates being used in the policy are Windows 8.1 and the GPO was created on a Windows 8.1 machine
    - If I set the registry key HKLM\System\CurrentControlSet\Control\Terminal Server\fDenyTSConnections = 0, manually or via GP Prefs, it still does not work
    - There are no visible errors in the application, system or security logs
    - I have compared registry snapshots before and after the change below and cannot see any differences in the relevant keys
    If I take the machine out of the OU and place it into a "noPolicy" OU, connections still do not work (after setting the regkey above) - however, if I use the GUI to turn off remote desktop then turn it back on, it works. I can then place the computer
    back in the original OU (where policy is applied) and it still works.
    All this leads me to believe that remote desktop is not being turned on "properly" (for want of a better term) by group policy and doing so via the GUI is doing something different/additional.
    So...
    - Has anyone seen this before ?
    - Anyone know how to turn on some sort of trace logging for this ? I have been unable to find a setting for this as yet ?
    Thanks.

    Hi Ben,
    Did this happen to all Windows 8.1 clients?
    >>however, if I use the GUI to turn off remote desktop then turn it back on, it works. I can then place the computer back in the original OU (where policy is applied) and it still works.
    Did we try restarting the machine to tackle the issue, for sometimes restarting can be helpful.
    >>Anyone know how to turn on some sort of trace logging for this ?
    I am not sure this is what we want for tracing this issue, but for tracing group policy processing, Gpsvc.log can be helpful.
    Regarding how to collect Gpsvc.log, the following blog can be referred to for more information.
    Userenvlog for Windows Vista/2008/Win7
    http://blogs.technet.com/b/mempson/archive/2010/01/10/userenvlog-for-windows-vista-2008-win7.aspx
    Best regards,
    Frank Shen

Maybe you are looking for