Remote-enabled FM - empty value for import parameter

Hi,
I've created a remoted-enabled FM in ECC, to be called by an ABAP program in CRM.
The FM has a import parameter of table (of char type). When it's called by the client with a value, but the debugging shown that the value is empty.
Is there any special attention needed when defining table type for the import parameter?
Any help would be much appreciated.
p/s: Apology for te newbie question.
Thanks.
-julius

Hello,
When you declare parameters under the TABLES tab, you are actually declaring a global table with header-line in the FM. Be sure you re sending/checking the values in the table, not the header line.

Similar Messages

  • Default value for importing parameter

    Hi all,
    I want to default a filename to the impoting parameter of Function module.
    But it allows only 21 chars. Can anyone help me in defaulting a value more than
    21 chars.
    Thanks,
    Keerthi.

    >
    keerthi kiran varanasi wrote:
    > Hi all,
    >
    > I want to default a filename to the impoting parameter of Function module.
    > But it allows only 21 chars. Can anyone help me in defaulting a value more than
    > 21 chars.
    >
    >
    >
    > Thanks,
    > Keerthi.
    I'm sorry, but there is no magic way of passing a value containing more than 21 chars into a variable defined as char21.

  • Error: Missing initial value for session parameter

    Hi,
    I'm facing a problem while running the ETL process for Complete 11.5.10 Execution Plan in DAC Client. Some tasks are getting failed beacuse of the following error:-
    ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: VAR_27026 [Error: Missing initial value for session parameter:[$DBConnection_OLAP].].
    ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
    ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6270 [Error: Variable parameter expansion error.].
    ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
    ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6163 [Error initializing variables and parameters for the paritition.].
    ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
    ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6226 [ERROR:  Failed to initialize session [SDE_ORA_Product_Category_Derive_Full]].
    ERROR : LM_36320 [Mon Nov 19 21:02:08 2007] : (2108|2632) Session task instance [SDE_ORA_Product_Category_Derive_Full]: Execution failed.
    When i checked the parameter file i can see the value assigned to the $DBConnection_OLAP. The same tasks ran successfully when i ran the ETL process for Complete 11.5.10 for the first time. I did not change anything after that and also all these are came built-in with the installation of Oracle BI Applications.
    Please anyone give me an idea what is causing the problem.
    Thanks,

    in DAC > Run History > Task Details, query
    Name = SDE_ORA_Product_Category_Temporary
    Open Status Description, look for string -lpf, the file after it is the actual parameter file DAC send to INFA server. E.g
    -lpf D:\DACTOPUS\Informatica\parameters\SDE_ORAR12_Adaptor.SDE_ORA_Product_Category_Temporary.txt
    Open the parameter file, most likely the [session_name] does not match with SDE_ORA_Product_Category_Derive_Full or some parameters are missing.

  • I need to pass null as a default value for a parameter in Before Trigger

    Hi All,
    I am using Before trigger function in calculation tab which has some set of parameters.So, I accept some parameters which are passed to this Before Trigger function and need these parameters default value as null.
    To be clear I want to set the Default value for a parameter in workbook to be NULL and pass the same to the calling Function.
    please help me.
    Thanks in advance

    Hi All,
    I am using Before trigger function in calculation tab which has some set of parameters.So, I accept some parameters which are passed to this Before Trigger function and need these parameters default value as null.
    To be clear I want to set the Default value for a parameter in workbook to be NULL and pass the same to the calling Function.
    please help me.
    Thanks in advance

  • How to passing multiple values for a parameter of discoverer(url parameters

    Hi All,
    I am trying to pass multiple values for a parameter of disco report. I am trying to include my url for discoverer viewer report. the values has the following
    'jeff,mark'
    'sfophiee,angela'
    Thanks and Regards
    Venkat

    Hello Venkat,
    I know there are some problems with 10.1.2.0.2, maybe if you haven't done yet you can try with 10.1.2.2, assuming this version should be working for multiple parameter values :
    OracleAS Discoverer 10.1.2.2 is installed with the following patch :
    Patch 4960210 PLACEHOLDER BUG FOR AS/DS 10G R2 PATCH SET 2 10.1.2.2
    So, once installed you can try adding your parameter as param_<parameter_name>='sfophiee,angela'
    Hope this helps, otherwise feel free to log a Service Request to Support.
    Best Regards,
    Gianluca

  • Select multiple items from a list box as values for a parameter of crystal report and Oracle procedure

    -  I have a  Product list box (asp.net) used as multiple selected values for  a parameter. 
    - The Product ID is defined in the Oracle procedure as NUMBER data type. 
    -  In my crystal report, I have a parameter field allow multiple values as p_product_id type as Number.  This is the code in my Record Selection Formula for the report:
    ({?p_product_id}[1] = -1 OR {Procedure_name.product_id} in {p_product_id})
    -  In C#, this is my code
    List<decimal?> productUnit = new List<decimal?>();
    int counter = 0;
    decimal prod;
    for (int i = 0; i < lstProducts.Items.Count; i++)
                  if (lstProducts.Items[i].Selected)
                                if (decimal.TryParse(lstProduct.Items[i].Value, out prod))
                                    productUnit.Add((decimal?)prod);                              
                                    counter++;
           if (counter == 0)
                       productUnit.Add(-1);                      
    ReportingDAO rDataFactory = new ReportingDAO();
    retVal = rDataFactory.GetProductReport(productUnit);
    public CrystalDecisions.CrystalReports.Engine.ReportDocument GetProductReport(List<decimal?> productUnit)
              CrystalDecisions.CrystalReports.Engine.ReportDocument retVal = new rptProductDownload();
              ReportLogon rptLog = new ReportLogon();
             rptLog.Logon(retVal, "RPT_PRODUCT_DOWNLOAD");
             retVal.SetParameterValue("p_product_id", productUnit); 
    I keep having the "Value does not fall within the expected range" when I debug.  My question is, is the data type I used for procedure/Crystal report/ and C# correct ?  I always have problem with the data type.  Any help would be
    appreciated
    Thank you

    Hi progGirl,
    Thank you for your post, but Microsoft doesn't provide support for CrystalReport now. Please post your question in SAP official site here:
    http://forums.sdn.sap.com/forum.jspa?forumID=313
    Thank you for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Force a user to enter a value for a parameter.

    Hi,
    I have a report with a bunch of parameters and I want to force the user to enter values for two parameters amongst all of them. Like for example when the user doesn't select values for those 2 parameters he should get a dialog box saying "please enter value for xyz parameter" or something like that, which will force the user to enter a value for the parameters before he can see the report.
    Please let me know if BI Publisher can do this.
    Thanks,
    DY

    Thanks for your replies BIPUser. I have recently started working on BI Publisher without a lot of help around.
    The information in the link is what I was thinking of, if there is no such feature I'll have a default value for those 2 parameters.
    Thanks,
    DY

  • Create URL with multiple values for one parameter

    Post Author: cbamberg
    CA Forum: General
    While I have no problems to create the URL to open a report with a single value for a parameter from my Java application, I don't know how to format multiple values for a parameter when I want to pass the "&prompt0=" value. The values I want to pass are numbers, not strings.
    Anyone can help?

    Hi gayatri,
    you need to select both the product id and custname.put a count on the prodid column and write a condition of count>1 and apply it.
    Thanks
    Hari

  • Person or Group colum in the SharePoint list retrieves empty value for Mobile phone property

    Person or Group colum in the SharePoint list retrieves empty Mobile phone for some users although thoses users have Mobile Phone values in the User Proifles. This happens only for some users. For some users  it shows Mobile phone for
    some days and after some days it dess not show Mobile Phone though Mobile Phone entries are in the User Profiles for those users.
    Appreciate any help to fix this.
    Thanks in Advance!
    Narayana Reddy
    Narayana Reddy G

    Hi Narayana,
    According to your description, my understanding is that the person or group column retrieved an empty value for Mobile phone in SharePoint 2010.
    Please go to the hidden User Information List using
    http://<SiteCollectionUrl>/_catalogs/users/detail.aspx , check the value of Mobile phone.
    Please go to CA->Monitoring->Review job definitions, scroll to User Profile to SharePoint Full Synchronization
    and
    User Profile to SharePoint Quick Synchronization, make sure they work well.
    In addition, please take a look at :
    http://donalconlon.wordpress.com/2012/03/02/sharepoint-user-information-list-is-not-being-updated/
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Multiple values for the Parameter

    1. Had any tried the selecting MULTIPLE values for the parameter in Oracle Discoverer Plus Releae 4.1 Version 4.1.37.00.0. If so can please let me know how to implement it.
    2. In a Page-Detail Cross Tab workbook, I have to show the weighted average instead of the avg or sum. Any inputs please.
    3. I have to compare two periods (TOP) of datapoints. Any inputs please.

    If you wanted to eliminate the need for users to type in the parameter values, you could create a LOV on the desired column. This will produce a distinct list of all valid values where the user would simply select as the wish. Of course you still need to check the "let user enter multiple values" checkbox if you want them to select more than one.
    -DG

  • Passing and Parsing Multiple values for 1 Parameter using ASP and reportInterface.ReportParameters

    Post Author: ckwizard77
    CA Forum: Crystal Reports
    HELP!!
    I have been knocking my head against a wall trying to figure out how to pass multiple values to 1 parameter and how to add it to the parameter collection. I have code so if I pass single values for each parameter it works fine. I am passing the parmeters and values in a pipe delimited string through a url where it gets parsed and pass in here.
    Any help would be greatly appreciated.
    Here is the single param code:
    Public Sub SetParamValues(ReportName, strParamName, ParamValue) Dim i,reportInterface, ParamName,strSubReprotName,CurrentValues        Set reportInterface = reportObject.PluginInterface("")      Set reportParameters = result.Item(1).PluginInterface("Report").ReportParameters      For i=1 to reportParameters.Count           if ReportName <>"" then                 strSubReprotName=reportInterface.ReportParameters.Item(i).ReportName               if strSubReprotName=ReportName then                    ParamName = reportInterface.ReportParameters.Item(i).ParameterName                    if ucase(ParamName)=Ucase(strParamName) then                         Set CurrentValues = reportInterface.ReportParameters.Item(i).CurrentValues                         CurrentValues.Clear()                         Dim newSingleParameter                         Set newSingleParameter = ReportInterface.ReportParameters.Item(i).CreateSingleValue                         newSingleParameter.Value = ParamValue                         reportInterface.ReportParameters.Item(i).CurrentValues.Add newSingleParameter                         reportInterface.ReportParameters.Item(i).PromptOnDemandViewing=false                         iStore.Commit result                    End if               End if          Else               ParamName = reportInterface.ReportParameters.Item(i).ParameterName               Set param1 = reportInterface.ReportParameters.Item(i)               if Ucase(ParamName)=UCase(strParamName) then                     Set CurrentValues = reportInterface.ReportParameters.Item(i).CurrentValues                    CurrentValues.Clear()                    Set newSingleParameter = ReportInterface.ReportParameters.Item(i).CreateSingleValue                    newSingleParameter.Value = ParamValue                    reportInterface.ReportParameters.Item(i).CurrentValues.Add newSingleParameter                    reportInterface.ReportParameters.Item(i).PromptOnDemandViewing=false                    iStore.Commit result                End if         End if      NextEnd Sub

    That Makes sense.
    thanks a lot !
    Well now are at it, mind if I ask you another quick question:
    If I make an option in the multiselect list called ALL which should return all the results:
    as should act like this
    select * from dept;
    you solution was:
    select * from dept
    where INSTR(':'||:P1_EMPNO||':', ':'||empno ||':') > 0
    Can I modify this to return all the rows ?

  • How do I set a NULL value for the parameter field

    Hi
    I've another question. I'm going to set single values for parameter fields.
    // e.g. set today for StartDate parameter field
    fc.setCurrentValue("", "StartDate", new Date());
    It should be possible to set a NULL value for date parameter fields.
    fc.setCurrentValue("", "StartDate", (Date)null);
    But this do not work. How do I set a NULL value correctly?
    Thank you in advance.
    Best regards,
    Thomas

    First question - is it a stored procedure parameter?
    You can't set a regular parameter field value to a null value.
    There was an issue with old version of the JRC, where it was allowing null to go through, but had unexpected behavior at times.
    Sincerely,
    Ted Ueda

  • How to make a subscription use the default value for a parameter

    Hi everyone,
    I need to use the CreateSubscription method and have this new subscription use a default value for certain parameter. How can I do this?

    Hi Marianne,
    I have to create the subscription programatically, which is different from what you mention. To further clarify my challenge:
    I have three parameters in a report: date-interval (string), start-date (date), end-date (date). If the user selects for example "last week" as the date-interval, the DEFAULT values for the other two are as follows:
    Code Snippet
    start-date=DateSerial(Year(Today),Month(Today),Day(Today)-Weekday(Today)-6)
    end-date=DateSerial(Year(Today),Month(Today),Day(Today)-Weekday(Today)-1)
    The user can then select intervals like "today", "yestarday", "this month" etc, and the other two parameters are calculated based on that date-interval parameter. Now, If I programatically create a subscription to a report that contains these three parameters and set a value of "last week" for the date-interval parameter, the subscription stores the fixed days (say september 10 to september 16) producing a report of the same week every time the subscription is run and not updating the correct interval to LAST-WEEK!. What should I put as the value for start-date and end-date when I create the subscription to have these two params get the DEFAULT calculated value based on the third param date-interval?
    Hope to have been more clear now.

  • XML Form - Empty value for param servername

    Hi,
    I noticed the parameter servername are empty for RenderListItem file, but ok on Edit.
    Any hint?
    Thanks and Regards,
    John

    hi vergeseMatz,
    As per my knowledge this can be done.
    "Is it possible to keep the options in the drop down list when we click the button to filter ?"
    Just call the Bapi/Data service which is giving the searched values after the filter button event is triggered.And mentioned that Bapi/data service in the dynamic property of the Drop down list.Do not forget to assign that link with the value selceted before the filter button is clicked.
    "clear the drop down list values when we click the button to reset?"
    you have to perform the same action but while reseting just send a blank or null value for search to Bapi/data service. Then do the same mentioned above.Since there will be no input for the search bapi/data service so no values will be populated in drop down.
    I hope it will help you.
    Thanks and Regards,
    Saurabh Goel

  • Elementry search help (value of import parameter)

    hi friends..
    In my search help...when i pass value in WERKS as CV01 ..then no result is coming..as only CV0 value is passed to import parameter..
    and if put CV* then list is coming..
    Any IDEA to solve this problem...
    Message was edited by:
            Madan Gopal Sharma

    Hi
    Have you created the search help properly
    create by going through the doc and attach to the field werks and see,
    1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
    2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
    3)An elementary search help defines the standard flow of an input help.
    4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
    5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
    6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
    pls go through this for search help creation
    http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
    Search Help Exits:
    Re: dynamic values for search help
    Re: Dynamic search  help
    Reward points if useful
    Regards
    Anji

Maybe you are looking for

  • After update to iOS 4.2.1, iPod is asking for passcode. what is it?!

    I have never set any security on my iPod Touch. But I have just updated to iOS 4.2.1 and, after the update completed, my iPod is now asking for a passcode when I "slide to unlock". What is the default passcode?!

  • ETF charges - what can I expect?

    I understand I've already asked about how much the ETF itself would be, and I understand that it's $350. I just want to know; are there other charges? Like taxes? Surcharges? I've done a little looking around and found that several people have had so

  • I have an Iconia 8 w1-810. I put in my password and the screen goes blank

    I have an Iconia 8 W1-810. I can put in the pasword but then the screen goes blank. The password is correct,  it tells me if I put the wrong one in. If i then press the power button and get the log-in screen up, but it says it's locked and disappears

  • Can a time stamp be applied that changes color if under 24 hr.

    We use fillable pdf to enter job orders. Is there a way that when orders are enter that if the due date is within a 24 hrs period it can change to red or say rush charhe to notify my clients and employees that there will be a upcharge.

  • Links not opening from Facebook and crome crash

    Nearly always, links aren't opening from Facebook, crome opens but displays it's previous page. Also crome is regularly crashing. I've cleared cache on FB and crome several times. Any advice?