XML Form - Empty value for param servername

Hi,
I noticed the parameter servername are empty for RenderListItem file, but ok on Edit.
Any hint?
Thanks and Regards,
John

hi vergeseMatz,
As per my knowledge this can be done.
"Is it possible to keep the options in the drop down list when we click the button to filter ?"
Just call the Bapi/Data service which is giving the searched values after the filter button event is triggered.And mentioned that Bapi/data service in the dynamic property of the Drop down list.Do not forget to assign that link with the value selceted before the filter button is clicked.
"clear the drop down list values when we click the button to reset?"
you have to perform the same action but while reseting just send a blank or null value for search to Bapi/data service. Then do the same mentioned above.Since there will be no input for the search bapi/data service so no values will be populated in drop down.
I hope it will help you.
Thanks and Regards,
Saurabh Goel

Similar Messages

Person or Group colum in the SharePoint list retrieves empty value for Mobile phone property

Person or Group colum in the SharePoint list retrieves empty Mobile phone for some users although thoses users have Mobile Phone values in the User Proifles. This happens only for some users. For some users it shows Mobile phone for
some days and after some days it dess not show Mobile Phone though Mobile Phone entries are in the User Profiles for those users.
Appreciate any help to fix this.
Thanks in Advance!
Narayana Reddy
Narayana Reddy G

Hi Narayana,
According to your description, my understanding is that the person or group column retrieved an empty value for Mobile phone in SharePoint 2010.
Please go to the hidden User Information List using
http://<SiteCollectionUrl>/_catalogs/users/detail.aspx , check the value of Mobile phone.
Please go to CA->Monitoring->Review job definitions, scroll to User Profile to SharePoint Full Synchronization
and
User Profile to SharePoint Quick Synchronization, make sure they work well.
In addition, please take a look at :
http://donalconlon.wordpress.com/2012/03/02/sharepoint-user-information-list-is-not-being-updated/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Problem cf10 installation xml error - Conflicting values for output property method

We just completed a ColdFusion 10 installation on Windows Server 2008 R2. After taking care of some configuration issues, we're now faced with a problem that we can't figure out. Searches on Google for the error returned almost nothing.
The error occurs when xmltransform is called in a CFC file. The error we get from CF is:
An error occured while Transforming an XML document
             Failed to compile stylesheet. 1 error detected.
It's not very helpful. In the coldfusion-error.log file, we have this entry:
Error at xsl:output on line 2 column 193
XTSE1560: Conflicting values for output property method
Anyone have any ideas how to fix this? Is it something simple that we overlooked, or a fundamental difference in the way CF10 handles xmltransform?
Thanks,
Jamie Carter

Here is the XSLT:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns="http://www.w3.org/1999/xhtml">
<xsl:output method="html" doctype-public="-//W3C//DTD XHTML 1.0 Transitional//EN" doctype-system="http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" media-type="application/xhtml+xml" />
<xsl:include href="E:\Inetpub\wwwroot\cfroot\cms\aacc-cms\general\xslt\aacc_main_browse.xsl" />
<xsl:include href="E:\Inetpub\wwwroot\cfroot\cms\aacc-cms\general\xslt\rotator\aacc_home_rotator.xsl" />
<xsl:include href="E:\Inetpub\wwwroot\cfroot\cms\aacc-cms\general\xslt\nav\aacc_home_side_menu.xsl" />
<xsl:include href="E:\Inetpub\wwwroot\cfroot\cms\aacc-cms\general\xslt\news\aacc_home_news.xsl" />
<xsl:template match="page">

        <div class="home_rotator_nav_div">
          <div class="nav" id="nav"><xsl:comment>nav div</xsl:comment></div>
        </div>
        <div id="home_rotator_container">
          <xsl:call-template name="home_side_menu" />
            <xsl:choose>
              <xsl:when test="string-length(text/child::*[attribute::seq=12])=0" >
                <xsl:comment>emergency alert not active</xsl:comment>
              </xsl:when>
              <xsl:otherwise>
                <div id="emergency">
                <div id="emergencyClose">
                  <a onclick="document.getElementById('emergency').style.display='none';">
                    close <img src="/aacc-cms/general/images/icons/controls/close.png" />
                    </a>
                  </div>
                  <div id="emergencyHeader"><h1>AACC Alert</h1></div>
                  <xsl:apply-templates select="text/child::*[attribute::seq=12]" />
                  <br /><br />
                </div>
              </xsl:otherwise>
            </xsl:choose>
          <div class="home_rotator_img">
                <xsl:call-template name="aacc_home_rotator" /><xsl:comment>rotator</xsl:comment>
          </div>
        </div>
<div id="body_container_top_bg"><div id="body_container_bottom_bg"><div id="homepage_body_container">
        <div class="bottom_center_home">
          <div id="bottom_center_content">
            <xsl:if test="string-length(image/child::*[attribute::seq=1]/imgFile)>0" >
              <div id="homepage_ad_1a">
                <xsl:apply-templates select="image/child::*[attribute::seq=1]" />
              </div>
            </xsl:if>
            <div id="homepage_ad_1b">
              <xsl:comment>bottom ad</xsl:comment>
              <a href="#"><xsl:apply-templates select="image/child::*[attribute::seq=2]" /></a>
            </div>
          </div>
        </div>
       <div id='e2campus' style="visibility:hidden;"> <script type="text/javascript" src="http://widgets.omnilert.net/f300fe3c5dccfdb6d076ecb0048934fa-1791">//</script> </div>
        <div id="body_bottom_left_home">
          <div id="body_bottom_right_home">
            <h2>AACC Highlights </h2>
            <div class="highlights">
              <div class="highlights_title">
                <xsl:if test="string-length(text/child::*[attribute::seq=7])>0" >
                  <div id="tertiary_1_txt1" ><xsl:apply-templates select="text/child::*[attribute::seq=7]" /><img src="/aacc-cms/general/image/cleardiv.png" /></div>
                </xsl:if>
              </div>
            </div>
            <div class="highlights">
              <div class="highlights_title">
                <xsl:if test="string-length(text/child::*[attribute::seq=8])>0" >
                  <div id="tertiary_1_txt2" ><xsl:apply-templates select="text/child::*[attribute::seq=8]" /><img src="/aacc-cms/general/image/cleardiv.png" /></div>
                </xsl:if>
              </div>
            </div>
            <div class="highlights">
              <div class="highlights_title">
                <xsl:if test="string-length(text/child::*[attribute::seq=9])>0" >
                  <div id="tertiary_1_txt3" ><xsl:apply-templates select="text/child::*[attribute::seq=9]" /><img src="/aacc-cms/general/image/cleardiv.png" /></div>
                </xsl:if>
              </div>
            </div>
            <div class="highlights">
              <div class="highlights_title">
                <xsl:if test="string-length(text/child::*[attribute::seq=10])>0" >
                  <div id="tertiary_1_txt4" ><xsl:apply-templates select="text/child::*[attribute::seq=10]" /><img src="/aacc-cms/general/image/cleardiv.png" /></div>
                </xsl:if>
              </div>
            </div>
            <div class="highlights">
              <div class="highlights_title">
                <xsl:if test="string-length(text/child::*[attribute::seq=11])>0" >
                  <div id="tertiary_1_txt5" ><xsl:apply-templates select="text/child::*[attribute::seq=11]" /><img src="/aacc-cms/general/image/cleardiv.png" /></div>
                </xsl:if>
              </div>
            </div>
            <xsl:if test="string-length(image/child::*[attribute::seq=3]/imgFile)>0" >
              <div class="highlights_last">
                <div class="highlights_last_title">
                  <xsl:apply-templates select="image/child::*[attribute::seq=3]" />
                </div>
              </div>
            </xsl:if>
            <xsl:if test="string-length(image/child::*[attribute::seq=4]/imgFile)>0" >
              <div class="highlights_last">
                <div class="highlights_last_title">
                  <xsl:apply-templates select="image/child::*[attribute::seq=4]" />
                </div>
              </div>
            </xsl:if>
            <xsl:if test="string-length(image/child::*[attribute::seq=5]/imgFile)>0" >
              <div class="highlights_last">
                <div class="highlights_last_title">
                  <xsl:apply-templates select="image/child::*[attribute::seq=5]" />
                </div>
              </div>
            </xsl:if>
            <xsl:if test="string-length(image/child::*[attribute::seq=6]/imgFile)>0" >
              <div class="highlights_last">
                <div class="highlights_last_title">
                  <xsl:apply-templates select="image/child::*[attribute::seq=6]" />
                </div>
              </div>
            </xsl:if>
            <xsl:if test="string-length(image/child::*[attribute::seq=7]/imgFile)>0" >
              <div class="highlights_last">
                <div class="highlights_last_title">
                  <xsl:apply-templates select="image/child::*[attribute::seq=7]" />
                </div>
              </div>
            </xsl:if>
          </div>
          <div class="bottom_left_home">
            <h2 style="font-size:16px; font-weight:bold;"><a href="/newsroom" style="color:#ffffff;">AACC Newsroom</a></h2>
            <div id="home_news_content">
              
              <div id="news_articles" class="news_articles">
              Loading newsroom feed...
                <img src="/aacc-cms/general/image/cleardiv.png" />
              </div>
            </div>
          </div>
        </div>
      </div>
    </div>
</div>
</xsl:template>
<xsl:template match="image/child::*[attribute::seq < 3]" ><xsl:call-template name="genImg" /><br /></xsl:template>
<xsl:template match="image/child::*[attribute::seq > 2]" ><xsl:call-template name="genImg" /></xsl:template>
</xsl:stylesheet>

Form Returns Null Values or Empty Values For Variables After Clicking OK Button

I'm trying to create a new user based on a template user. Right now I just want to get the variables right, I just want to be able to select a template user, fill in the information that will be different, and click Create User.
I'm not sure why this isn't working. I think the problem is in the code for the OK button or Enter keypress but I'm not sure what's wrong with the code I've entered. Any advice would be helpful. I'm sure it's something simple but I'm fairly new to powershell
and syntax has been rather tricky for me. Sorry if it's a rookie mistake and thanks for any advice.
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
Write-Host "Creating The Form For Selecting Templates"
$TemplateForm = New-Object System.Windows.Forms.Form
$TemplateForm.Text = "Select a Template"
$TemplateForm.Size = New-Object System.Drawing.Size(640,700)
$TemplateForm.StartPosition = "CenterScreen"
Write-Host "Enabling Keystroke Response on Form"
$TemplateForm.KeyPreview = $True
Write-Host "Defining Keystroke Response for Enter Key"
$TemplateForm.Add_KeyDown({if ($_.KeyCode -eq "Enter")
{$SelectedTemplate=$TemplateListBox.SelectedItem;$newuserfirstname=$FnameTextBox.Text;$newuserlastname=$LnameTextBox.Text;$newusertitle=$TitleTextBox.Text;$newuserhiringmanager=$MgrNameTextBox.Text;$newuserphonenumber=$PhoneNumberTextBox.Text;$newuserdepartment=$DeptTextBox.Text;$TemplateForm.Close()}})
Write-Host "Defining Keystroke Response for Esc Key"
$TemplateForm.Add_KeyDown({if ($_.KeyCode -eq "Escape")
{$TemplateForm.Close()}})
Write-Host "Placing OK Button On Form"
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,550)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "Create User"
$OKButton.Add_Click({$SelectedTemplate=$TemplateListBox.SelectedItem;$newuserfirstname=$FnameTextBox.Text;$newuserlastname=$LnameTextBox.Text;$newusertitle=$TitleTextBox.Text;$newuserhiringmanager=$MgrNameTextBox.Text;$newuserphonenumber=$PhoneNumberTextBox.Text;$newuserdepartment=$DeptTextBox.Text;$TemplateForm.Close()})
$TemplateForm.Controls.Add($OKButton)
Write-Host "Placing Cancel Button On Form"
$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,550)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click({$TemplateForm.Close()})
$TemplateForm.Controls.Add($CancelButton)
Write-Host "Placing Label On Template List Box"
$TemplateListLabel = New-Object System.Windows.Forms.Label
$TemplateListLabel.Location = New-Object System.Drawing.Size(10,20)
$TemplateListLabel.Size = New-Object System.Drawing.Size(280,20)
$TemplateListLabel.Text = "Please fill out the following new user information:"
$TemplateForm.Controls.Add($TemplateListLabel)
Write-Host "Creating Template List Box for Form"
$TemplateListBox = New-Object System.Windows.Forms.ListBox
$TemplateListBox.Location = New-Object System.Drawing.Size(10,40)
$TemplateListBox.Size = New-Object System.Drawing.Size(260,20)
$TemplateListBox.Height = 520
Write-Host "Placing Label On First Name Box for Form"
$FnameTextLabel = New-Object System.Windows.Forms.Label
$FnameTextLabel.Location = New-Object System.Drawing.Size(300,20)
$FnameTextLabel.Size = New-Object System.Drawing.Size(95,20)
$FnameTextLabel.Text = "First Name:"
$TemplateForm.Controls.Add($FnameTextLabel)
Write-Host "Creating First Name Box for Form"
$FnameTextBox = New-Object System.Windows.Forms.TextBox
$FnameTextBox.Location = New-Object System.Drawing.Size(300,40)
$FnameTextBox.Size = New-Object System.Drawing.Size(95,20)
$TemplateForm.Controls.Add($FnameTextBox)
Write-Host "Placing Label On Last Name Box for Form"
$LnameTextLabel = New-Object System.Windows.Forms.Label
$LnameTextLabel.Location = New-Object System.Drawing.Size(400,20)
$LnameTextLabel.Size = New-Object System.Drawing.Size(95,20)
$LnameTextLabel.Text = "Last Name:"
$TemplateForm.Controls.Add($LnameTextLabel)
Write-Host "Creating Last Name Box for Form"
$LnameTextBox = New-Object System.Windows.Forms.TextBox
$LnameTextBox.Location = New-Object System.Drawing.Size(400,40)
$LnameTextBox.Size = New-Object System.Drawing.Size(95,20)
$TemplateForm.Controls.Add($LnameTextBox)
Write-Host "Placing Label On Department Box for Form"
$DeptTextLabel = New-Object System.Windows.Forms.Label
$DeptTextLabel.Location = New-Object System.Drawing.Size(500,20)
$DeptTextLabel.Size = New-Object System.Drawing.Size(95,20)
$DeptTextLabel.Text = "Department:"
$TemplateForm.Controls.Add($DeptTextLabel)
Write-Host "Creating Department Box for Form"
$DeptTextBox = New-Object System.Windows.Forms.TextBox
$DeptTextBox.Location = New-Object System.Drawing.Size(500,40)
$DeptTextBox.Size = New-Object System.Drawing.Size(95,20)
$TemplateForm.Controls.Add($DeptTextBox)
Write-Host "Placing Label On Title Box for Form"
$TitleTextLabel = New-Object System.Windows.Forms.Label
$TitleTextLabel.Location = New-Object System.Drawing.Size(300,70)
$TitleTextLabel.Size = New-Object System.Drawing.Size(95,20)
$TitleTextLabel.Text = "Title:"
$TemplateForm.Controls.Add($TitleTextLabel)
Write-Host "Creating Title Box for Form"
$TitleTextBox = New-Object System.Windows.Forms.TextBox
$TitleTextBox.Location = New-Object System.Drawing.Size(300,90)
$TitleTextBox.Size = New-Object System.Drawing.Size(95,20)
$TemplateForm.Controls.Add($TitleTextBox)
Write-Host "Placing Label On Manager Name Box for Form"
$MgrNameTextLabel = New-Object System.Windows.Forms.Label
$MgrNameTextLabel.Location = New-Object System.Drawing.Size(400,70)
$MgrNameTextLabel.Size = New-Object System.Drawing.Size(95,20)
$MgrNameTextLabel.Text = "Manager's Name:"
$TemplateForm.Controls.Add($MgrNameTextLabel)
Write-Host "Creating Manager's Name Box for Form"
$MgrNameTextBox = New-Object System.Windows.Forms.TextBox
$MgrNameTextBox.Location = New-Object System.Drawing.Size(400,90)
$MgrNameTextBox.Size = New-Object System.Drawing.Size(95,20)
$TemplateForm.Controls.Add($MgrNameTextBox)
Write-Host "Placing Label On Manager Name Box for Form"
$PhoneNumberTextLabel = New-Object System.Windows.Forms.Label
$PhoneNumberTextLabel.Location = New-Object System.Drawing.Size(500,70)
$PhoneNumberTextLabel.Size = New-Object System.Drawing.Size(95,20)
$PhoneNumberTextLabel.Text = "Phone Number:"
$TemplateForm.Controls.Add($PhoneNumberTextLabel)
Write-Host "Creating Phone Number Box for Form"
$PhoneNumberTextBox = New-Object System.Windows.Forms.TextBox
$PhoneNumberTextBox.Location = New-Object System.Drawing.Size(500,90)
$PhoneNumberTextBox.Size = New-Object System.Drawing.Size(95,20)
$TemplateForm.Controls.Add($PhoneNumberTextBox)
Write-Host "Creating Fake List of Templates"
$TemplateGroupList = "Test"
$TemplateForm.Controls.Add($TemplateListBox)
Write-Host "Ensuring List Box appears in front of other windows"
$TemplateForm.Topmost = $True
$TemplateForm.Add_Shown({$TemplateForm.Activate()})
[void] $TemplateForm.ShowDialog()
$SelectedTemplate
$newuserfirstname
$newuserlastname
$newusertitle
$newuserhiringmanager
$newuserphonenumber
$newuserdepartment
Pause

If you plan on performing all of the work under the Click event, then you won't need to worry about assigning a Script scope to the variables, but if you are planning on using those variables outside of the Event, then David's answer is the way to go.
Another option is to use a hash table as it also works around the issue with variable scope in a UI Event.
#Define at beginning of script
$hashtable = @{}
$OKButton.Add_Click({$hashtable.SelectedTemplate=$Something})
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

Removing an empty value for a imported table shown in a slicer

Hi,
I've imported a table and I've put the related code field in a slicer for a my pivot table. In the slicer I can see an empty box that I want to eliminate. I've tried to apply a filter for original data and powerpivot data from the powerpivot window. Moreover
I've tried to uncheck the showing elements without data, but unsuccessfully. I've tried to update the imported tables after each applied change but no results.
Any suggests to me, please? Thanks

Hi there,
i'm facing a similar problem which i find it hard to understand.
1x fact table with 2 columns (to keep it simple):
   + col.1 - id_Division
   + col.2 - Sales_Amout
1x dimension table with the the Company Business Organization (Departments, Business Units, etc) with 3 columns:
   + col.1 - id_Division
   + col.2 - Business_Unit
   + col.3 - Business_Area
If i just load these two tables in my PowerPivot, then go to a worksheet and create a pivot table, selecting just the dimension table col.1 to the Values and col.2 to a slicer, i get the correct situation = 10x slicers corresponding to the 10x Business Units
existing in the table, as you can see in the imagem attached.
If i create a relationship between the fact table col.1 (id_Divion) with the dimension table col.1 (id_division), and then refresh the same pivot i've just created before, i get an extra empty slicer with no values in it. IS there any reason for this
to appear?
Appreciate your kind help and inputs. IF required i can share my workbook in order to get some further help.
Regards
Felino ([email protected])

Remote-enabled FM - empty value for import parameter

Hi,
I've created a remoted-enabled FM in ECC, to be called by an ABAP program in CRM.
The FM has a import parameter of table (of char type). When it's called by the client with a value, but the debugging shown that the value is empty.
Is there any special attention needed when defining table type for the import parameter?
Any help would be much appreciated.
p/s: Apology for te newbie question.
Thanks.
-julius

Hello,
When you declare parameters under the TABLES tab, you are actually declaring a global table with header-line in the FM. Be sure you re sending/checking the values in the table, not the header line.

Getting form field values for radio button

Hello to the forum.
I have a form in which I want to control the value selected in a radio buttons field on whether to allow access to another field.
I can't find info neither here nor in the examples.
Anybody know how to do?
Thank in advance.

Hi,
You can use the change event of the radio button list.
Select the readio button list exclusion group, in script editor select the "change" event. As an example if we have two selections "aa" and "bb" which have values 1 and 2 respectively.
You can write this Javascript code to change event.
if(this.rawValue == 1)
xfa.host.messageBox("aa");
else if(this.rawValue == 2)
xfa.host.messageBox("bb");
Hope helps,
Asiye

Getting empty values for Quantity and UOM in CCA Retraction from BW to ECC

Hi,
We are retracting the Project data from BW to ECC following the
SAP Network Bolg : BPS Retraction for Cost Center Accounting by Praveen Mayalur.
I am using the following settings:
<u>
<b>Function Modules:</b></u>
UPR_COST_PLAN_EXEC
UPR_COST_PLAN_INIT
<u><b> Parameter Exit Functions:</b></u>
BUSI     I_BUSI
CASE     I_CASE
DELTA     DEL_BOOK
MAPP     KCD_REPID
RFC_DEST     RFCDEST
TEST     TST_X
VERSR3     I_VERS
WAIT     I_WAIT
ZARE     I_COAR
ZELM     I_CELM
ZTYP     I_CTYP
<u><b> <b>parameter group</b>.</b></u>
Retr. R/3 Comp.          9
Retractor Control          4
Delta Update          1
Sender str.          UPB_SND_COPS
Destination          ED1CLNT300
Test mode Is Active          0
R/3 Version
Wait for Update
Controlling Area          01
Cost Element          02
CElem category          03
In the UPBR_Rule we have put 0AMOCC and 0QUANTITY in the Formula.
After successful completion of retraction, we were able to get all the values to ECC except Quantity and Unit Of Measure.
Please let me know if any other settings are to be made.
Thanks you in advance.
Srini.

Dear Lokesh,
Sorry for the confusion.
Please note that the retraction is for Project Systems. The Retraction is done to CO Planning table COSP.
Thank you.
Srini.

Multi-Valued Properties in XML Forms

Hello,
Can anyone tell me how to select multiple values for multi-valued properties in an XML Forms. It seems that the combo box only allows you to select one value.
Thanks,
Chris.

Hi Chris,
nice to hear, that you're implementing my way of solving this multi value issue. And much nicer to hear, that it seems to work for you, too!
You can not write back your multi value properties from XML form. Thats for sure. You can think of:
1. Synchronize the value of your text field property with the value of the multi value propery whenever you store the document. This could be done using the event "property set".
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0ab890-0201-0010-849d-98d70bd1d5f0">See: KM Events</a>
2. Overwrite the content of your multi value property at runtime, depending on the value of the single value property which holds the csv. Do this by using a Repository Filter. <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ee3a57-0701-0010-3e9a-ddae7e4e0521">See: RepositoryFilter</a>
3. Forget about the multi value property and make the text field property indexable. This should work, too.
All three options should work!
HTH,
Carsten

System.Exception: null or empty values

Have designed a 4 part form Using DW MX, ASP.NET C# and MySQL
and currently getting the below error when moving from one page to
the next.
The web.config file is on the server, there are no null or
empty values, and the key tags match.
I am new to applicaiton development in DW and am now stuck -
any suggestions?
System.Exception: This page has a MM:DataSet, MM:Insert,
MM:Update or MM:Delete tag with a null or empty value for the
ConnectionString and DatabaseType attributes.
Often, such values come from application settings in the
web.config file. That file might be missing from the server
executing this page. Or, it might be missing the particular add key
tags for the database connection this page uses. If you are using
Dreamweaver, look for the web.config file in the local root folder
of your Dreamweaver site. Once you find this file, you can either:
Put this file onto the server that is executing this page.
Copy the add key tags from the web.config in the local root
folder of your Dreamweaver site and paste them into the web.config
file in the server that is executing this page.
at DreamweaverCtrls.DataSet.DoInit()
Text

http://java.sun.com/docs/books/tutorial/uiswing/components/spinner.html#model
Might be a good start.

Few Projectproperty and Listproperty fields returning empty values (CrossListQueryInfo)

I am running a CrossListQueryInfo and the ViewFields for the CAML includes
<ProjectProperty Name="Title"/>
<ProjectProperty Name="Url"/>
<ListProperty Name="Title"/>
<ListProperty Name="DefaultViewUrl"/>
I am getting empty values for Url and DefaultViewUrl, although it is returning Titles correctly. Is this some limitation or I am missing something?

I Feel I have to say this... Just a thought: have you received legal
advice on whether the "data sent by email is not secure" disclaimer
would hold up? I'd recommand also checking with your merchant account
provider. Your form could be argued as leading the user into
irresponsible use of their card.
Aandi Inston

How to define null or empty value in BAPI function modules?

Hi,
I have problem with BAPI functions, where some parameters are mandatory.
For example: when I try to use HR BAPI's(BAPI_PERSDATA_CHANGE, etc.) I have to insert parameters like SUBTYPE,OBJECTID,LOCKINDICATOR. The PA0002 table that is used from this BAPI doesn't have SUBTYPE, OBJECTID, LOCKINDICATOR, for any of the records that I would like to select.
So what I tried, was to put a ' ', to indicate that is empty. It returned an error message saying "Make an entry in all required fields". Next tried to put in some values for these fields -- and it returned an error message saying "No data selected from 0002 for this period".
I also tried to run BAPI_FAMILY_CHANGE that uses data from table PA0021. Here I found some records with SUBTYPE, OBJECTID fields that were not empty, but LOCKINDICATOR was still missing. So I tried to put LOCINDICATOR value directly in to database (with MS SQL Enterprise Manager). After that I was able to use BAPI_FAMILY_CHANGE.
I think that manually inserting data in database is not normal procedure.
Is there something that I have missed out?
I mean -- how can I get this to work without inserting data directly in database?
How can I define null or empty value in BAPI function modules?
Thank you in advance.
Best regards,
Mihail

Defining an empty value for a parm in a table is easy.
First get the function's definition from the SAP system
Second only populate the fields for which you have a value to set
Third execute the function.
The JCO takes care of the rest.
Enjoy

Retaining Variable Value for Scenario Restart

I have a slave-package where i use many variables for JDBC connection/url/login/passwd and Target File Path - all have been defined as type HISTORIZE
My packages are as follows
(1) There are many odiSqlUnload steps in the slave-package which uses the connection information & file path from the variables which have been declared in it.
(2) I just have declare variable steps in the slave-package, and have created a master-package which calls this slave-package's scenario using the command[i] "odiStartScen -GLOBAL.var_name=<var_value>"
so that all variables get their values from the master-package's call with variable values sent thru it
(3) Now, the problem occurs when I have to re-start my slave-package's scenario. Say for eg, the first step in my slave-package works fine, but errors out on the next step;
But when I re-start it for the next step, ODI doesn't seem to pick up values from the variables even though they are of type HISTORIZE, and I get an error with empty values for JDBC, URL & file path which I had specified as variables.
Why is it that the variables are not able to retain their values.
Any help would be greatly appreciated!

finally I get it. I have to use #varname instead of :varname, otherwise it won't get error but just cannot get value. and I find out this #varname cannot be defined anywhere, otherwise the value will get lost also.

Adobe Livecycle Designer ES 2 - Adobe Dynamic XML Forms?

How can you convert a dynamic XML form design in a static PDF Form design? I tried to save a dynamic XML Form as a static PDF Form, and then tried to preview it in Designer but the layout change scripts were working which should work only for dynamic xml forms and not for the static pdf forms. Please suggest another way to do it. Thanks in advance.

You use Master Pages to set layout that you want to use on multiple pages.
Design what you want in a Master Page and then assign it to the pages you want in Object>Pagination>Place: and choose On Page> whatever you called your Master Page.

XML forms app with link pointing to KM folder

Hi guys!
I need to create in XML forms an application for messages. A message should include a link, which will point into KM folder with documents or photos. This link can be for each message different.
How to achieve this?
Thanx!
Peter

Hello Peter,
If you use a "Browser" Element in the XML Forms Builder, you can assign the type Object or Preview for images. The data Sheme should point to Rid or Image (depends what you want), this is a property of the data sheme element in the lower left corner.
hope this helps,
Axel
Please consider rewarding points to helpful answers on SDN

XML Form - Empty value for param servername

Similar Messages

Maybe you are looking for