Default value for importing parameter

Hi all,
I want to default a filename to the impoting parameter of Function module.
But it allows only 21 chars. Can anyone help me in defaulting a value more than
21 chars.
Thanks,
Keerthi.

>
keerthi kiran varanasi wrote:
> Hi all,
>
> I want to default a filename to the impoting parameter of Function module.
> But it allows only 21 chars. Can anyone help me in defaulting a value more than
> 21 chars.
>
>
>
> Thanks,
> Keerthi.
I'm sorry, but there is no magic way of passing a value containing more than 21 chars into a variable defined as char21.

Similar Messages

I need to pass null as a default value for a parameter in Before Trigger

Hi All,
I am using Before trigger function in calculation tab which has some set of parameters.So, I accept some parameters which are passed to this Before Trigger function and need these parameters default value as null.
To be clear I want to set the Default value for a parameter in workbook to be NULL and pass the same to the calling Function.
please help me.
Thanks in advance

Hi All,
I am using Before trigger function in calculation tab which has some set of parameters.So, I accept some parameters which are passed to this Before Trigger function and need these parameters default value as null.
To be clear I want to set the Default value for a parameter in workbook to be NULL and pass the same to the calling Function.
please help me.
Thanks in advance

How to make a subscription use the default value for a parameter

Hi everyone,
I need to use the CreateSubscription method and have this new subscription use a default value for certain parameter. How can I do this?

Hi Marianne,
I have to create the subscription programatically, which is different from what you mention. To further clarify my challenge:
I have three parameters in a report: date-interval (string), start-date (date), end-date (date). If the user selects for example "last week" as the date-interval, the DEFAULT values for the other two are as follows:
Code Snippet
start-date=DateSerial(Year(Today),Month(Today),Day(Today)-Weekday(Today)-6)
end-date=DateSerial(Year(Today),Month(Today),Day(Today)-Weekday(Today)-1)
The user can then select intervals like "today", "yestarday", "this month" etc, and the other two parameters are calculated based on that date-interval parameter. Now, If I programatically create a subscription to a report that contains these three parameters and set a value of "last week" for the date-interval parameter, the subscription stores the fixed days (say september 10 to september 16) producing a report of the same week every time the subscription is run and not updating the correct interval to LAST-WEEK!. What should I put as the value for start-date and end-date when I create the subscription to have these two params get the DEFAULT calculated value based on the third param date-interval?
Hope to have been more clear now.

Modify default value for static parameter field programmatically

Hi,
I have my Crystal Reports stored in a BO Enterprise system. I have written a java programm that scans the repository, loads the CR reports one by one into a ReportClientDocument, modifies the data source and then stores the updated report back to repository (it overwrites the existing objects).
I was even able to modify the default values for the parameters, which are used for scheduling of each report.
But what I am trying to do know is to overwrite the default value used when invoking the report interactively. This should be the value found under the Default Value field, when the Properties window of the parameter is opened in the CR designer.
This is what I have tried so far:
Option 1: First I tried to set the default values using com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.getDataDefinition().getParameterFieldController().getField(...).getDefaultValues() . The only thing I have managed to do using this approach is to modify the static LOVs that are associated to static parameters. The actual selected value (shown under Default Value in the Properties window for the given parameter field) remained unchanged, when invoking the report in the InfoView or opening it in the CR designer.
Option 2: I have used com.crystaldecisions.sdk.plugin.desktop.report.IReport.getReportParameters().get(ik).getDefaultValues() to change the default values. I was able to see my changes in the BO repository (using a query on CI_INFOOBJECTS), still the changes did not really have an impact to what is displayed as default value when invoking the report in the InfoView.
Any help will be appreciated.
It would be great to know if someone of you has already implemented successfully such a use-case.
Regards,
Stratos
Edited by: Efstratios Karaivazoglou on Dec 9, 2009 8:52 AM
Edited by: Efstratios Karaivazoglou on Dec 15, 2009 11:33 PM

Hi,
For Crystal Design related queries, close this thread and start the thread in the [SAP Crystal Reports Design forums|http://forums.sdn.sap.com/forum.jspa?forumID=300&start=0]
- Bhushan

Pass the results from a selection formula to the default values for a parameter field

Post Author: kevans
CA Forum: General
Crystal 10 u2013 SQL 2000
I want to create a parameter field that will display all of our IT Departments so the end user can select the one they want to run the report against, such as IT-Security, IT-Network, etc. about 40 in all. BUT I donu2019t want this to be a static list where I type in all 40 depts in the default list, I was hoping I could do something more dynamic such a formula field that says u201C if {group.name startswith u2018ITu2019 then {group.name}u201D and then have the parameter field pull from this source.
Iu2019m sure this has been answered in a previous post but Iu2019m not finding it. I see stuff on creating a record selection formula such as u2018if {?group} like u2018IT-Secur*u2019 thenu2026u201D but this leaves too much room for error if people donu2019t type the name correctly. Maybe Iu2019m not using the record selection formula correctly? Sorry if I offend anyone but I just upgraded from 8 to 10 and thought for sure this option would be in 10, perhaps built right into the parameter default value page where you can place in select criteria but NOTHING has changed.

Post Author: sharonmtowler
CA Forum: General
if you are creating the parameters in the rpt file, it will only pull values you enter, or directly from the database
in the record selection you can do something like this, so if they only enter the first 2 characters it should pick up only the IT etc.
(if eft(,2)={?parameter} then true else ={?parameter})

Remote-enabled FM - empty value for import parameter

Hi,
I've created a remoted-enabled FM in ECC, to be called by an ABAP program in CRM.
The FM has a import parameter of table (of char type). When it's called by the client with a value, but the debugging shown that the value is empty.
Is there any special attention needed when defining table type for the import parameter?
Any help would be much appreciated.
p/s: Apology for te newbie question.
Thanks.
-julius

Hello,
When you declare parameters under the TABLES tab, you are actually declaring a global table with header-line in the FM. Be sure you re sending/checking the values in the table, not the header line.

MIRO - default value for currency parameter (waers)

Hi everyone,
I need to establish 'EUR' as a default value in transaction MIRO. I've tried already changing the value in SU02 but it doesn't work. I've tried the badi MRM_HEADER_DEFAULT but asks for a password when I try to modify it so that's out too.
Is there any way I can establish 'EUR' as default currency? any leads will be appreciated, thank you very much in advance.
Zigor.

hi,
try user exits..
LMR1M001            User exits in Logistics Invoice Verification
LMR1M002            Account grouping for GR/IR account maintenance
LMR1M003            Number assignment in Logistics Invoice Verification
LMR1M004            Logistics Invoice Verification: item text for follow-on docs
LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006            Logistics Invoice Verification: Process XML Invoice
MRMH0001            Logistics Invoice Verification: ERS procedure
MRMH0002            Logistics Invoice Verification: EDI inbound
MRMH0003            Logistics Invoice Verification: Revaluation/RAP
MRMN0001            Message output and creation: Logistics Invoice Verification
regards,

Today's date as default value for a parameter

Hello,
I am using Disco Plus 10g and Disco Viewer 10g.
I would like to default a parameter date to the current today's date. This date should be modified by the user (under Viewer), when he/she runs the report.
Is there a way to do this ?
Thanks a lot,
Olivier

Olivier,
I also needed that, but could not find a way to make it in 9.0.2. So, I gave up. If you find a solution, please share with us. Thanks.

Problem using default value of report parameter 1 to validate parameter 2 passed in to report

I am having a problem with an SSRS report using the default value of report parameter 1 to validate parameter 2 passed in to report (via C#) instead of using the value of parameter 1 that is also passed into the report. Here are the
simplified details:
Using SSDT, SQL Server 2008 R2
SSRS report has 2 parameters:
P1 -- text, hidden, default value 'R1', ... front-end C# code can pass 'R2' or 'R1'
P2 -- text, allows multiple values, list of available values provided by stored procedure (sproc_list) that takes P1 value as a parameter. Hence, sproc_list either provides a list for P1 = 'R1' or P1 = 'R2'.
List for P1 = 'R1' is 'A', 'B', 'C'
List for P1 = 'R2' is 'A', 'B', 'D'
Values for P1 and P2 can be passed in via C# to the report.
The C# front-end displays 2 report choices to the user, R1 and R2, where both choices call the same RDL; but choice R1 passes in 'R1' for P1, and the choice R2 passes in 'R2' for P1.
Upon a users 1st time use of the report no parameters are passed in. Then when the user exits the report, the parameter value for P2 that was chosen is saved off to a file for R1 or R2, and used the next time the user selects the report.
Everything always works fine for report R1 since the default value for P1 is 'R1'.
When R2 is chosen and the user selects 'D' as the value for P2, runs the report, then exits, the P2 value of 'D' for R2 is saved to a file. When the user returns the next day to run report R2, 'R2' is passed for P1, and 'D' is passed for P2.
This is when the problem occurs. The value of 'D' for P2 is validated against a list generated for P2 based on the default value of 'R1' for parameter P1. Hence, SSRS considers 'D' an invalid value for P2 and blanks out the P2 parameter.
The user can then use the drop down list for P2 and choose 'D', but this defeats the purpose of saving the parameter values to be used the next time.
Why is the stored procedure that provides a list of available values for parameter P2 using the default value of 'R1' for parameter P1 instead of using the value of 'R2' passed into the report for parameter P1?

Hi Tom,
Sorry for my delay.
If I understand correctly, you have two parameter in your report. It is a couple of cascading parameter. If we have choose ‘R1’ of P1, the P2 values is A, B, C. ‘R2’ of P1, corresponding P2 values is A, B, D. What your requirement is to save the end use
select option of these two parameters.
In SSRS, if we have configure the parameter with default value. When we run the report, the parameter will fill with the default value to filter data. If we want to save the last status we are render the report, we need to update the default value of P1.
If we are query the default value from database, if possible, we can
update the database try to resolve the issue. Alternatively, we can set the dynamic default value for the parameter.
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How to set Default value of a parameter to display Current Date

I need to display the Default value for my parameter 'As of Date' which is of datatype Date as Current Date[DD-MON-YYYY].
How can I do This??

As Tamir-L pointed out, there is no direct way to do this, but there is a workaround:
First, create a new parameter, but do not base it on any item. Give the parameter a default value of "Today".
Then, create a condition like:
   (    :myParam = 'Today'
    AND <date_item> = sysdate)
OR (    <date_item> = to_date(:myParam, 'DD-MON-YYYY'))Where :myParam is the parameter you created, and <date_item> is the item you are comparing against.
To make things a bit more bulletproof, you could create a calculation that returns sysdate when the parameter is 'Today', a date when the to_date is successful, and NULL when the to_date fails, and use the calculation in the condition.

How to set default value for vc2_255_arr in plsql parameter directive?

Hi,
I would like to set a default values for a plsql parameter which is of vc2_255_arr type. How to do that?
Below is the example from PL/SQL Server Page.
+" To set a default value, so that the parameter becomes optional, include a default="expression" attribute in the directive. The values for this attribute are substituted directly into a PL/SQL statement, so any strings must be single-quoted, and you can use special values such as null, as in the following example:+
+<%@ plsql parameter="p_last_name" default="null" %> "+
My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"
*<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" %>*
Thanks in advance!
kwong

My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"You need to declare it in a package specification and initialize in the package body:
SQL> create or replace package pmp_lib
as
   type vc2_255_arr is table of varchar2 (255)
                          index by binary_integer;
   vc2_255_arr_default   vc2_255_arr;
end pmp_lib;
Package created.
SQL> create or replace package body pmp_lib
as
begin
   vc2_255_arr_default (1) := 'abc';
   vc2_255_arr_default (2) := 'def';
end pmp_lib;
Package body created.
SQL> declare
   arr   pmp_lib.vc2_255_arr := pmp_lib.vc2_255_arr_default;
begin
   for i in 1 .. arr.count
   loop
      dbms_output.put_line (arr (i));
   end loop;
end;
abc
def
PL/SQL procedure successfully completed.so in your case it would probably be sth like (assuming pmp_lib is a package):
<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" default = "PMP_LIB.vc2_255_arr_default" %>

Using expression in Default Value for Parameter in BI Publisher Model

Hi Everyone,
I have created a BI publisher data model with bind parameters. It works fine, however, I need to put a default value in the parameter that is the result of a query. I have a month and a year parameter and for month parameter, I want the default to be always the current month when the report is first opened. I put the sql query in the default column but it does not seem to work.
Any help is greatly appreciated,
Thanks,
DRL

Did you get a resolution for this?
I might be able to use the solution

Import and default values for columns

Hi guys
I have a table in which there are default values for some columns. I take export of this table.
I go to another database where this table structure is already there (but default values are not set). I run the import of table with ignore=Y. It does all...import the data...create the indexes and all...but doesn't set the default values for the columns.
Shouldn't it do that also ? ignore=Y means that ignore the object creation errors and proceed with the rest of the stuff ? Or there is some problem in my understanding ?
Version 10gR2 on AIX 5.3 and using traditional export/import.
Thanks
Amardeep Sidhu

Hanji Sidhu Sahib.
Mein Tuhade liye eh example try kita hai.
SQL> conn simar/simar
Connected.
SQL> SQL> create table orders (
dept varchar2(20) primary key,
place varchar2(20),
intcol integer default 12
2 3 4 5
Table created.
SQL>
Inserted few values ...........+ commit.
SQL> conn simar/simar
Connected.
SQL> select * from orders;
DEPT PLACE INTCOL
SALES TORONTO 12
HR LA 12
BILLING FLORIDA 12
IT HALIFAX 5
exp simar/simar@RACDB file=exptest.dmp log=exptest.log
rac01:/software/backup>exptest.dmp log=exptest.log <
Export: Release 10.2.0.3.0 - Production on Tue May 6 23:35:58 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user SIMAR
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user SIMAR
About to export SIMAR's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export SIMAR's tables via Conventional Path ...
. . exporting table ABC 12 rows exported
. . exporting table ORDERS 4 rows exported
. exporting synonyms
. exporting views
. exporting stored procedures
. exporting operators
. exporting referential integrity constraints
. exporting triggers
. exporting indextypes
. exporting bitmap, functional and extensible indexes
. exporting posttables actions
. exporting materialized views
. exporting snapshot logs
. exporting job queues
. exporting refresh groups and children
. exporting dimensions
. exporting post-schema procedural objects and actions
. exporting statistics
Export terminated successfully without warnings.
rac01:/software/backup>strings exptest.dmp |grep -i 'create'
CREATE TABLE "ABC" ("A" VARCHAR2(10), "B" VARCHAR2(10)) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "USERS" LOGGING NOCOMPRESS
CREATE TABLE "ORDERS" ("DEPT" VARCHAR2(20), "PLACE" VARCHAR2(20), "INTCOL" NUMBER(*,0)) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "USERS" LOGGING NOCOMPRESS
rac01:/software/backup>strings exptest.dmp |grep -i 'alter'
ALTER TABLE "ORDERS" MODIFY DEFAULT
ALTER TABLE "ORDERS" MODIFY ("INTCOL" DEFAULT 12
ALTER TABLE "ORDERS" ADD PRIMARY KEY ("DEPT") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "USERS" LOGGING ENABLE
SQL> conn simar/simar
Connected.
SQL> drop table orders;
Table dropped.
imp simar/simar@RACDB file=exptest.dmp log=imp_exptest_1.log tables='ORDERS'
rac01:/software/backup>exptest.dmp log=imp_exptest_1.log tables='ORDERS' <
Import: Release 10.2.0.3.0 - Production on Tue May 6 23:46:48 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via conventional path
import done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
. importing SIMAR's objects into SIMAR
. importing SIMAR's objects into SIMAR
. . importing table "ORDERS" 4 rows imported
Import terminated successfully without warnings.
SQL> conn / as sysdba
Connected.
SQL> set heading off;
set echo off;
Set pages 999;
set long 90000;
SQL> SQL> SQL> SQL> SQL>
SQL> select dbms_metadata.get_ddl('TABLE','ORDERS','SIMAR') from dual;
CREATE TABLE "SIMAR"."ORDERS"
( "DEPT" VARCHAR2(20),
"PLACE" VARCHAR2(20),
"INTCOL" NUMBER(*,0) DEFAULT 12,
PRIMARY KEY ("DEPT")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
SQL>
Here the alter table statement is in the dmp file as well as in the imported table.
Regards

Set default value for parameter fields

Good day!
Situation:
1. I have 2 parameter fields in reports (dateFrom and dateTo)
2. Before running report in ASP.NET I change value this fields (dateTo = today, dateFrom = today - 3 days)
3.I use for this source:
foreach (ParameterField crParam in CrystalReportSource1.ReportDocument.ParameterFields)
                        CrystalDecisions.Web.Parameter crParametr = new CrystalDecisions.Web.Parameter();
                        string ParametrName = crParam.Name;
                        crParametr.Name = ParametrName;
                          crParametr.DefaultValue = ActionReportParameter.GetParametrValue(ReportName, ParametrName);
                         CrystalReportSource1.Report.Parameters.Add(crParametr);
4. And repurt run without request value parameter fields.
5. BUT!!! now I need request value parameter fields before report start running - I want set default values for filelds and offer user change its before report start run.
How do this?
Thanks

I believe you need to create your own parameter promt screen. Capture what the user entered and pass that to the report(?).
slv

Default value for attribute "COUNTRY" in BP_HEAD_SEARCH/MainSearch

Hi Gurus,
Requirement is to set default value for attribute "COUNTRY" in BP_HEAD_SEARCH/MainSearch when user clicks on Corporate Account.
Below is code that i have written in DO_PREPARE_OUTPUT.
Code is working fine and in the debug also i can see the value of COUNTRY is set to DE, but it is not showing on the screen for first time but when i load component second time(Refresh the screen), it shows me value.
Any help would be appreciated. If somebody has otheralternative kindly share.
CALL METHOD super->do_prepare_output( iv_first_time = iv_first_time ).
Calling Super Method
CALL METHOD super->do_prepare_output
   EXPORTING
     iv_first_time = abap_true.
Data Declatation
DATA :lr_col            TYPE REF TO if_bol_bo_col,
        lr_current        TYPE REF TO if_bol_bo_property_access,
        lr_param          TYPE REF TO if_bol_bo_property_access,
        lr_qs             TYPE REF TO cl_crm_bol_dquery_service,
        lv_attr_name      TYPE name_komp,
        lv_sign           TYPE bapisign,
        lv_option         TYPE bapioption,
        w_country_exist   TYPE c,
        w_param           TYPE string,
        w_value           TYPE string,
        w_flag            TYPE c.
Getting SEARCH Context Node
lr_qs ?= me->typed_context->search->collection_wrapper->get_current( ).
Get Selection Parameters
lr_col ?= lr_qs->get_selection_params( ).
Start from first parmaters
lr_current = lr_col->get_first( ).
Clearing Variables
CLEAR : w_country_exist, w_flag, w_param, w_value.
Loop till we have selection paramters
WHILE lr_current IS BOUND.         " While loop 1
checking attribute name is COUNTRY then setting some variable
    w_param = lr_current->get_property_as_string( 'ATTR_NAME' ).
    CASE w_param.
      WHEN 'COUNTRY'.
If country is filled then setting variable
        w_value = lr_current->get_property_as_string( 'LOW' ).
        IF w_value IS NOT INITIAL.
          w_country_exist = abap_true.
        ENDIF.
When we got COUNTRY attribute then setting flag
        w_flag = abap_true.
    ENDCASE.
Calling next parameter
    lr_current = lr_col->get_next( ).
ENDWHILE.                          " While loop 1
In below block we are checking is COUNTRY attribute is blank and
we have found COUNTRY attribute in current selection paramters
IF lr_qs IS BOUND.                 " SEACRCH CONTEXT BOUND
If vairable is blank means DE or any other value is not filled in COUNTRY Attribute
    IF w_country_exist IS INITIAL.   " w_contry_exist
We have to add selection attribute if we come accross COUNTRY attribute during our search
      IF w_flag EQ abap_true.        " w_flag
Adding COUNTRY attribute with default value 'DE'
        lr_qs->add_selection_param( EXPORTING iv_attr_name = 'COUNTRY'
                                              iv_sign      = 'I'
                                              iv_option    = 'EQ'
                                              iv_low       = 'DE' ).
      ENDIF.                         " w_flag
    ENDIF.                           " w_contry_exist
ENDIF.                             " SEACRCH CONTEXT BOUND
In below block we will remove COUNTRY attribute when it has blank value
IF lr_qs IS BOUND AND w_country_exist IS INITIAL.
    lr_current = lr_col->get_first( ).
    WHILE lr_current IS BOUND.
      w_param = lr_current->get_property_as_string( 'ATTR_NAME' ).
      CASE w_param.
        WHEN 'COUNTRY'.
          w_value = lr_current->get_property_as_string( 'LOW' ).
          IF w_value IS INITIAL.
            lr_col->remove( iv_bo = lr_current ).
          ENDIF.
      ENDCASE.
      lr_current = lr_col->get_next( ).
    ENDWHILE.
ENDIF.
Edited by: Harsharandeep Singh on Apr 28, 2011 3:44 PM

Hi,
Try it like this:
DATA:
    lr_bo        TYPE REF TO if_bol_bo_property_access ,
    lv_attr_name TYPE name_komp.
FIELD-SYMBOLS:
    <ls_param>   TYPE crms_thtmlb_search_criterion.
READ TABLE parameters
       ASSIGNING <ls_param>
       WITH KEY field = 'COUNTRY'.
IF ( sy-subrc = 0 ).
    <ls_param>-value1 = ip_pfct.
ENDIF.
CHECK ( me->parameter_collection IS NOT INITIAL ).
lr_bo = me->parameter_collection->get_first( ).
WHILE lr_bo IS BOUND.
    CALL METHOD lr_bo->get_property_as_value
      EXPORTING
        iv_attr_name = 'ATTR_NAME'
      IMPORTING
        ev_result    = lv_attr_name.
    IF lv_attr_name EQ 'COUNTRY' .
      CALL METHOD lr_bo->set_property
        EXPORTING
          iv_attr_name = 'LOW'
          iv_value     = 'DE'.
      EXIT.
    ELSE.
      lr_bo = me->parameter_collection->get_next( ) .
    ENDIF.
ENDWHILE .
Kind regards,
Micha

Default value for importing parameter

Similar Messages

Maybe you are looking for