Remote Log Targets not working in ACS

Dear all
I have 2 x ACS boxes configured as Primary & secondary.
In ACS1 - In monitoring and reports-> option I can see the User authentication, authorization and Accounting activities logs. I want to configure ACS2 as remote log server.
For that in ACS1, in System administration->Log configuration-> remote log targets->new
Added as - ACS2- 1.1.1.2 - in Advance options -
Port-20514 (default is 514, need to change to 20514 , Instructions from Cisco),
Facility mode - Level6
Maximum length -1024
In logging categoris - in Global - Edit "AAA Audit" - remote syslog Targets - i have added - Logcollector (ACS1) and ACS2.
In Log collector optin --> ACS1 is configured.
After this , i open ACS2 - Monitoring and reports optin to view the logs but when ever i click - it is diverting to ACS1.
if i change log collector in ACS1 as ACS2, i can see the logs on ACS2. so at a time i can see logs only one ACS box.
I would like to view the logs in both ACS boxes. can any one help me please.

As per Cisco, you can not able to User 2 ACS boxes simultanously to recevie log messages. Remote Log targets for Syslog Server.
so, i can't use simultanously 2 x acs boxes , i need to go for syslog server.
Chapter 19, "Understanding Logging"
Configuring Remote Log Targets
You can configure specific remote log targets (on a syslog server only) to receive the logging messages for a specific logging category. See Chapter 19, "Understanding Logging" for more information on remote log targets. See Configuring Logging Categories, page 18-25 for more information on the preconfigured ACS logging categories.
Closing this ticket.. answered by Mohammed Feroz.

Similar Messages

1. TACAS+ Accounting and Logged in Users report is not working on ACS 4.1(1

Hi,
I am facing problem with ACS 4.1 accounting, TACAS+ Accounting and Logged in Users report are not working, the csv file is been generated but nothing is showened in the file.
I have checked the documents related to ACS 4.1, it says that there is a bug related to command accounting âCSCsg97429 - TACACS+ Command Accounting does not work in ACS 4.1(1) Build 23â.
Tried upgrading the same with the patch applAcs-4.1.1.23.3.zip, still it is not working.
Other reports are working fine.
1. TACAS+ Accounting - not working
2. Logged in Users - not working
3. TACAS+ Administration - working
4. Passed Authentication - working
5. Failed Attempts - working
Any suggestions or any idea, please revert.
Regards
Vineet

Hi,
Thanks
Yes I have configured the command âaaa accounting exec default start-stop group tacacs+â
As I have mentioned all the other reports are working. Which user and when he has logged in and what commands he has used. Only the TACAS+ Accounting and logned user is not working.
Regards,
Vineet

ACS 5.2 - unable to delete remote log target

Hello Everyone,
I have two ACS 5.2 running as primary and secondary instances respectively. When I try to delete a remote log target under
System Administration >
... >
Configuration >
Log Configuration >
Remote Log Targets
I get the following error message...."The item you trying to delete is referenced by other items. You must remove all references to this item before it
can be deleted".
I have searched the configuration within the web gui and was unable to find anything that reference the object that I'm trying to delete. Has anyone
experienced the same thing?
Thanks.

Did you check the logging categories?
For each category check the "Remote syslog Target" tab and see if the log Target you are trying to delete appears in any of the "Selected Targets"

Another FPN Thread: Remote role assignment not working

Hi all,
We have successfully implemented FPN for use in our ESS and BW environment and we are experiencing very little problems with it. We now want to start implementing it for our eRecruitment and SRM systems (as producers). For some reason we are not able to use the Remote Role Assignement functionality.
We have set up trust for the systems and use SSO.
Connection test for the producer is successfull.
We can see the Producer content in the pcd on the consumer.
Server times are the same.
As far as I know I have correctly set permissions on producer and consumer.
Possible cause: We are in the process of upgrading our consumer Portal to NW 7.0 SPS15 and have encountered some problems. The system is partially upgraded, so some components are SP15 and some others are still SP13. This is currently under investigation by SAP. Can this be an issue as our producer portals all are still on SP13?
I hope to hear from you soon. Please ask if you need any screenshots. Thanks in advance.
Best regards,
Jan Laros

Hi Jan,
if remote role assignment not works, you can also use remote delta links. I only work with remote delta links because i have more options and a better performance.
If your connection works you can go to Content Administration ->Portal Content-> NetWeaver-Content-Producer. Hier you can see your remote system. Now you can copy the role and add it to your portal-content.
If you can not see the content make sure that you have the same user on both sides also check the premissions on the portal-content of your remote system. To test the connection it is easier to add Everyone group to the content of your remote system.
regards,
Sharam

Logging buffered not working

Hello:
In an ACE module multicontext environment the buffered logging is not working on the last context I created.
The same config though works well for another context.
The maximum size and the buffer size is showing 0 in the "show logging" below:
Thanks for helping
logging enable
logging standby
logging timestamp
logging trap 5
logging history 4
logging buffered 5
logging facility 16
logging queue 200
logging device-id context-name
logging host 10.10.10.1 udp/514
logging host 10.10.10.2 udp/514
logging rate-limit 42 60 level 0
logging rate-limit 42 60 level 1
logging rate-limit 42 60 level 2
logging rate-limit 42 60 level 3
logging rate-limit 42 60 level 4
logging rate-limit 42 60 level 5
logging rate-limit 42 60 level 6
logging rate-limit 42 60 level 7
show logging`
Syslog logging:                 enabled
Facility:                       16
History logging:                enabled (level- warnings)
Supervisor logging:             disabled
Trap logging:                   enabled (level - notifications)
Timestamp logging:              enabled
Fastpath logging:               disabled
Persist logging:                disabled
Standby logging:                enabled
Rate-limit logging:             (min - 10000 max 100000 msgs/sec)
                42 messages 60 seconds level 0
                42 messages 60 seconds level 1
                42 messages 60 seconds level 2
                42 messages 60 seconds level 3
                42 messages 60 seconds level 4
                42 messages 60 seconds level 5
                42 messages 60 seconds level 6
                42 messages 60 seconds level 7
Console logging:                disabled
Monitor logging:                disabled
        Logging to 10.10.10.1 udp/514
        Logging to 10.10.10.2 udp/514
Device ID:                      context name "CTC_PROD7"
Message logging:                none
Buffered logging:               enabled (level - notifications) maximum size 0--------------------------->>>>>>
Buffer info: current size - 0 global pool - 4194304 used pool - 4194304
                min - 418816 max - 0
                cur ptr = 0 wrapped - yes

Hi,
This is because your global pool is full. Go to one of your other contexts clear logg , and will work.
Buffer info: current size - 0 global pool - 4194304 used pool - 4194304
Dan

My home sharing and remote app does not work. How do I fix it? I am on a university network.

My home sharing and remote app does not work.
Here is my setup:
Macbook 2009 running Mac OS X 10.6.8
Itunes 10.6.1
Ipod Touch 4th gen Mac OS X 5.1
I am on a university secured network.

Hi Charles, chinese may be difficult, see our resident language ecxpert, Tom's reply here...
https://discussions.apple.com/message/20061347#20061347
On the slowness...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?
https://discussions.apple.com/servlet/JiveServlet/showImage/2-18666790-125104/AM Pageouts.jpg

Remote DVR will not work?

I signed up for FIOS when it first came to my area. Verizon installed a basic Netgear router. I since upgraded to a wireless Netgear router about 4 years ago. We just upgraded our DVR to a Home Media and tried to turn on the remote DVR. But when I go to the web site it says remote DVR will not work without original Verizon router. I don't understand why it won't work. Is there a setting or something in the router to make it work or do I need a different router that Verizon has to provide? I am guessing the original router I had wouldn't work either because it is the same brand as the one I have now.

Called and got a Westell router today. Got it all hooked up and internet and TV are working fine but I still can't activate remote DVR. The DVR has an access code listed, tells me to go to the website and sign in with my verizon.net id. I do and I still get the error remote DVR not possible with third party router. Any more help?

CLI admin password rest using install cdrom not working on ACS 5.5 cumulative patch 1

Hi,
I can't log onto either of our ACS 5.5 servers using the CLI admin passwords (which we do have recorded and no one appears to have changed ).
I get accessed denied on both.
On our DR ACS I went through the procedure of resetting the CLI admin password using the install cd mounted in the VM (the iso is actually for 5.3) , but even after picking a new password, I get access denied when I try to use it.
Does anyone know what could be wrong?
Is it possible that patching to ACS 5.5 from ACS 5.3 (a month or so ago) has some how locked out the passwords ?
Thanks.

Hi,
The reason why it is not working is because you need to use the ISO image or cd for ACS 5.5.
If you try to reset the CLI administrator password with an ISO image or cd for other ACS version it will not take the new password.
Please give it a try with the 5.5 image.
Regards,
Gerald

Satego x200-21u - Remote and HDMI not work on Windows 7

Hey
I have a problem with win7 and the remote that was delivered with my notebook when i bought it
I installed all drivers from the toshiba homepage for win7. I also installed some of the winvista driver, like the webcam- and the touchpad drivers.
The only two things, not working are the remote and the HDMI-Sound output.
my remote doesnt work with win7. and if i connect my notebook to my flat-tv via HDMI-Cable i only see the picture but hear no sound.
I changed also the settings in the soundoptions in win7 from default to Digitalaudio (HDMI) but it doesnt work anyways..
can someone tell me which drivers i need to install these two or what i have to do, to make my remote and the HDMI output work?
thanks alot

Hi mate,
This is really strange to say because this notebook is a little bit older and therefore there is no official Windows 7 support I think...
Do you have yellow exclamation marks in device manager at the moment?
For HDMI I think chipset, display and sound driver should be installed. Maybe you can get one on the Intel page directly.
Make also sure that the newest BIOS version is installed on your notebook.

Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

i have still facing same problem in last two week in my system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not in my system use the command netstat -a -o command in
command prompt but this is my bad luck its not woking in my machine after i have decide to change RDC listening port via registry i have change it 3389 to 3391 after restart my system, and
after again testing using same command but no any change again rdc not listening . After i have search this issue on search engine google bing and microsoft , i have found more solutions but i have try one
uninstalled two microsoft updates first is kb KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
any version computer running , i have try three and four time enable disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
stinger tools to scan my machine to remove virus but stinger is not found any thread in system. ihave already run this command in my system sfc /scannow Please Can you help me to fix this issue.

Hi,
When you try to start the Remote Destop Connection, what errors it showed out?
Could the other PCs connect this PC with the RDC?
So you have read this blog?
RDP connections might fail due to a problem with KB2621440 - MS12-020
Did you reinstalled the KB2621440?
Besides, did you follow this guide to enable the RDC connection?
Connect to another computer using Remote Desktop Connection
And also this guide?
Why can’t I connect using Remote Desktop Connection?
Please take a check with those settings again.
Best regards
Michael Shao
TechNet Community Support

Remote Desktop Connection not working

I am able to remote desktop connect to my home computer from work; however, I can't remote desktop connect to my work comptuer and server. I believed it has something to do with my Linksys E3000 access point settings but I'm not sure where to look for and verify. I took my home laptop to work and able to do remote desktop connect to the server. I also took a laptop that's working fine with remote desktop connect to the server home and tried to remote desktop connect to the server at work and it's not working. Therefore, I've concluded that it has something to do with the access point and not the settings in the computer because it works fine when I took it out of my home network. I also VPNP in to my work place so that it has the same IP address as at work and still, remote desktop connection from home to work is not working. Any suggestion is much appreciated.

thebluemamba_24 wrote:
Connecting from home to your remote desktop server has nothing to do with your router. Certain ports are needed to be opened from the server’s end in order to host an application. Try to connect your computer to your modem or to another wireless network just to check if your work’s remote desktop will work. In case it will not work, then contact your IT guy.
If you read my previous post it said:
"I took my home laptop to work and able to do remote desktop connect to the server. I also took a laptop that's working fine with remote desktop connect to the server home and tried to remote desktop connect to the server at work and it's not working. Therefore, I've concluded that it has something to do with the access point and not the settings in the computer because it works fine when I took it out of my home network."
I think my above statement answers your question of "Try to connect your computer to your modem or to another wireless network just to check if your work’s remote desktop will work." However, your statement prompts me think of something else. What I have tried is bring my laptop to work and tried connect via RDC to the server and it works but it just not working when trying at home. What I have not done is instead of brining my laptop to work and try RDC there, perhaps I should I try it on a friend's or relative's network and see if I can do RDC to my server at work. If this does not work as well, then, could it be that at work there is something something outside RDC coming? But even if this is so, why can't VPN work?

Event log is not working in Multiform server

Hi ,
We are trying to implement event logging in our application. We have created separate event source for our application. When we testing this our local dev machine it is working without any problem. when I try to test the same in higher environment (QA, Pre-prod)
it is not working. The QA environment is a multi form server. We are able to see the event source in the event viewer, but the logging is not happening. We have tried restarting IIS, restarting the services.
Any suggestion or guidance will be highly appreciated.
Thanks in Advance

Hi GHPMS,
>>We are trying to implement event logging in our application
Do you mean this code as below?
string sSource;
string sLog;
string sEvent;
sSource = "dotNET Sample App";
sLog = "Application";
sEvent = "Sample Event";
if (!EventLog.SourceExists(sSource))
EventLog.CreateEventSource(sSource, sLog);
EventLog.WriteEntry(sSource, sEvent);
EventLog.WriteEntry(sSource, sEvent,
EventLogEntryType.Warning, 234);
Like in following screenshot
>>We are able to see the event source in the event viewer, but the logging is not happening.
Maybe, you also need to check if the
eventlog exist method before you try to crate it new.
You might need check on what account the service is running under, which may make a difference on multi form server and up since they are more stringent on account rights on those environment.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Remote access vpn not working, VPNC client

Hi,
I have configured a remote access vpn client on cisco ASA 5520 with the following configuration. we are using cisco vpn client.
tunnel-group consultant type remote-access
tunnel-group consultant general-attributes
address-pool VPN
authentication-server-group RSA-AAA LOCAL
default-group-policy consultant
tunnel-group consultant ipsec-attributes
pre-shared-key *
group-policy consultant internal
group-policy consultant attributes
vpn-idle-timeout 120
vpn-session-timeout 720
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value access-spilt
access-list access-spilt standard permit host 10.101.50.60
One of the linux users is using vpnc and once the user connects to the vpn and the user adds a static route on the machine with the destination pointing to the vpn interface, for example 10.101.50.0/24, user is able to reach all the hosts in the subnet even though the access list on the firewall is configured for one host 10.101.50.60.
I did the same test on a windows machine, but was only able to reach the specific host allowed through vpn. why is the network filter not working for vpnc. please advise.
Thanks

Hi have solved the issue . enabling the demo 3DES & AES now my VPN is connecting
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=139
thx to friend "Jennifer Halim"

Remote on Headphones not working...and it isn't fluff

Hi,
So today randomly the remote on my (latest Apple) headphones stopped working. As in it won't play, pause, skip, adjust the volume, or start voice control. I know it's not the "fluff" people on other threads have talked about swabbing out of your headphone jack because a) I tried that and b) the remote doesn't work on multiple devices I've use it with in the past. I don't know if this is related to the wire because I hear sound out of the right plug, but the remote on the right wire doesn't work. And this literally just happened today.
I bought an iPod touch 4G last September w/ Apple Care, and then bought the remote headphones for $30 from apple in February. Does the AppleCare cover these, even if I didn't buy them with the iPod? (probably not, stupid question). Can I swap these for new ones after 7 1/2 months? I'm not paying $30 AGAIN because the remote feature just stopped working one day, in the middle of a bunch of days of normal usage. And that feature is the reason I went and spent the $30.
Any suggestions? Any policy/warranty stuff? Anything will be appreciated since I use the play/pause/volume buttons pretty much every day.
Thanks!
Jake

I would bring them into your local Apple Store/Genius Bar and demonstrate this issue to them. The headphones should still be covered under the 1 year warranty against manufacturer defects meaning Apple should swap them out of for you. Either way, a trip your local Apple Store would be your next best bet.
B-rock

Remote video streaming not working with Windows Server Essentials Media Pack

I installed Server Essentials Media Pack and the video streaming via remote access does not seem to be working. I see all the video files on the server's remotewebaccess page in "Media Library" group. When I try to play the video in Chrome
the player appears for a brief moment, but then the browser starts downloading the entire file. With Internet Explorer the empty browser window opens and the download starts. I am trying it while outside of my local network. The video streaming used to work
with Server 2012 Esesentials. Am I missing some additional codecs or remote streaming is no longer supported?

Hi,
What’s the default player for these media files on your computer? The issue may be caused by the default player could not load the media file correctly. Please make sure Windows Media Player
with full codec installed is the default one. And then check if the media streaming feature could work as normal. Here is an article about how to configure the media streaming feature, hope it helps.
Manage Digital Media in Windows Server 2012 Essentials
http://technet.microsoft.com/en-us/library/jj628151.aspx
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Remote Log Targets not working in ACS

Similar Messages

Maybe you are looking for