Remote mailbox move

Hi,
The environment is as follows :
source forest with a single domain
destination forest with exchange servers in a child domain and user accounts in another child domain
after preparing the destination enviromnent with Prepare-MoveRequest.Ps1 script and migrating accounts with ADMT, moving the mailboxes with EMS and the New-Moverequest cmdlet works just fine. The cmdlet is as follows :
New-MoveRequest -Identity [email protected] -RemoteLegacy -TargetDatabase "MBX-DB01" -RemoteGlobalCatalog "dc01.sourcedomain.com" -RemoteCredential $Remote -TargetDeliveryDomain "destinationdomain.com"
Trying to do the same move with EMC fails with the below error, it seems that EMC can't find the prepared destination account which is in another domain than the exchange servers where I run the EMC.
The question is : is there a way to perform this kind of mailbox move through EMC ? Thanks
Error:
The operation couldn't be performed because object '00e7019d-4573-4524-8883-9aa1e0668c48' couldn't be found on 'exchangedomain.com'. Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.140).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.Ex6F9304
Exchange Management Shell command attempted:
'00e7019d-4573-4524-8883-9aa1e0668c48' | New-MoveRequest -Remote -TargetDatabase 'MBX-DB01' -RemoteHostName 'remoteexchange.sourcedomain.com' -RemoteCredential 'System.Management.Automation.PSCredential' -TargetDeliveryDomain 'destinationdomain.com'

Hi,
Firstly, I’d like to confirm if there is CAS role installed in the target domain.
If there is no CAS server in the target domain, we cannot use EMC to move mailbox and EMS is the only tool.
If there is CAS server, we can use EMC. Please double confirm if the information are proper when you use EMC. And you can refer to the following article:
http://technet.microsoft.com/en-us/library/dd351280(v=exchg.141).aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

Mobile and remote Outlook access do not work after mailbox move

We recently moved our mailboxes to a different datastore. We are not unable to access our mailboxes using our cell phones or Outlook remotely. testconnectivity.microsoft.com gives me a http 500 error for both the Exchange virtual directory and the RPC.
Any ideas?

Was this a migration to another version of Exchange or simply mailbox move from the same version of Exchange?

Remote 2010 - 2010 Cross-forest mailbox move timeout

I'm having a problem moving large mailboxes cross-forest. Smaller mailboxes with fewer items move successfully. I've tried the suggestions in this article
http://technet.microsoft.com/en-us/library/dd638094.aspx about increasing DataImportTimeout in the EWS web.config and restarting IIS on both sides, just in case.
I also found a suspicious timeout in MsexchangeMailboxReplication.exe.config that was 00:00:50 (exactly the timeout it's complaining about in the error below), but changing it to 10 minutes didn't seem to help
<customBinding>
<binding name="MrsProxyClientBinding"
receiveTimeout="00:00:50"
sendTimeout="00:00:50">
<reliableSession ordered="true" />
Below is the full text of the error I'm geting in the move request log. After this error occurs, the entire mailbox move process begins again. The strange thing is I've gotten successful moves of mailboxes up to 10Gb before, and this same error happens on a
mailbox that's 4gb.
Can someone help troubleshoot this error? It's driving me crazy.
11/17/2011 10:00:00 PM [Server2] Initial seeding completed, 172342 items copied, total size 10.55 GB (11,327,875,162 bytes).
11/17/2011 10:00:00 PM [Server2] Final sync has started.
11/17/2011 10:02:13 PM [Server2] Transient error TimeoutErrorTransientException has occurred. The system will retry (1/60).
Error details: The call to 'https://server1.domain.local/EWS/mrsproxy.svc server1.domain.local (14.1.325.0 caps:01FFFF)' timed out. Error details: The request channel timed out while waiting for a reply after 00:00:00. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. --> The request operation did not complete within the allotted timeout of 00:00:50. The time allotted to this operation may have been a portion of a longer timeout. --> The request channel timed out while waiting for a reply after 00:00:00. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. --> The request operation did not complete within the allotted timeout of 00:00:50. The time allotted to this operation may have been a portion of a longer timeout.
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CallService(GenericCallDelegate del, String epAddress, VersionInformation serverVersion)
at Microsoft.Exchange.MailboxReplicationService.MailboxReplicationProxyClient.CallServiceWithTimeout(TimeSpan timeout, GenericCallDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MailboxReplicationProxyClient.Microsoft.Exchange.MailboxReplicationService.IMailboxReplicationProxyService.IFolder_GetRules(Int64 folderHandle, Int32[] extraProps)
at Microsoft.Exchange.MailboxReplicationService.RemoteFolder.Microsoft.Exchange.MailboxReplicationService.IFolder.GetRules(PropTag[] extraProps)
at Microsoft.Exchange.MailboxReplicationService.FolderWrapper.<>c__DisplayClass1c.<Microsoft.Exchange.MailboxReplicationService.IFolder.GetRules>b__1b()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.FolderWrapper.Microsoft.Exchange.MailboxReplicationService.IFolder.GetRules(PropTag[] extraProps)
at Microsoft.Exchange.MailboxReplicationService.FolderRecWrapper.ReadRules(IFolder folder, PropTag[] extraPtags)
at Microsoft.Exchange.MailboxReplicationService.FolderRecWrapper.EnsureDataLoaded(IFolder folder, FolderRecDataFlags dataToLoad, ReportBadItemsDelegate reportBadItemsDelegate)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass4`1.<LoadFolders>b__0()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.LoadFolders[TFolderRec](FolderRecDataFlags dataToLoad, PropTag[] additionalPtags, GenericCallDelegate abortDelegate, ReportBadItemsDelegate reportBadItemsDelegate)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.GetFolderMap[TFolderRec](FolderRecDataFlags dataToLoad, PropTag[] additionalPtags, GenericCallDelegate abortDelegate, ReportBadItemsDelegate reportBadItemsDelegate)
at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.GetSourceFolderMap(GetFolderMapFlags flags, FolderRecDataFlags dataToLoad, GenericCallDelegate abortDelegate)
at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyAllFolders()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.<FinalSync>b__4b(MailboxMover mbxCtx)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IFolder.GetRules
OperationSide: Source
Primary (34bdddb1-2e13-45ab-a575-3f6de414c398)
PropTags: [ReportTime; 1627389955; 1627455491]
Folder: 'MAILFOLDER', entryId [len=46, data=0000000083AB09B7111C3B4682D4140582FD21F30100E929EE996D69BF409B946039972CD120000000F4001F0000], parentId [len=46, data=0000000083AB09B7111C3B4682D4140582FD21F30100D60B955AB375EF4DB7D38206B8CDAA36000000E3000C0000]

Hi,
Please try the steps below to chang the following file:
C:\Program Files\Microsoft\Exchange Server\V14\Bin\MSExchangeMailboxReplication.exe.Config file contents:
--Change the following on the source side on the CAS server in the file MSExchangeMailboxReplication.exe.config
• Changed the values from 1048576 to 3048576 :-
<binding name="MrsProxyClientBinding"
receiveTimeout="00:00:50"
sendTimeout="00:00:50">
<reliableSession ordered="true" />
<textMessageEncoding>
<readerQuotas maxArrayLength="3048576"
maxStringContentLength="3048576" />
</textMessageEncoding>
<httpsTransport authenticationScheme="Negotiate"
maxReceivedMessageSize="3048576"
allowCookies="true" />
• Modify the
file MSExchangeMailboxReplication.exe.config on the target CAS server as follows:-
binding name="MrsProxyClientBinding"
receiveTimeout="00:00:50"
sendTimeout="00:00:50">
<reliableSession ordered="true" />
<textMessageEncoding>
<readerQuotas maxArrayLength="3048576"
maxStringContentLength="3048576" />
</textMessageEncoding>
<httpsTransport authenticationScheme="Negotiate"
maxReceivedMessageSize="3048576"
allowCookies="true" />
Note: make a backup before you change the value.
Restart IIS and then try again to see if this works. Hope it is helpful.
Best Regards Fiona Liao E: [email protected]

MailBox Move Error With Exchange 2010 sp3

I initiated a mailbox move for a specific mailbox and let it run all night. The next day, the user stated he cannot log into is mailbox and the error stated "mailbox is moving, check back later".
Exchange stated the status of the move is "CompletedWithError". I noticed that the mailbox is still in the old database.
I tried to remove the move request and received an error "couldn't find a move request that corresponds to this identity".
I rebooted the exchange server.
Exchange still shows the user in the old database
There is no move requests in exchange
The user is still experiencing the same error "You weren't able ti sign in because the mailbox is being move"
I tried to initiated another move and received:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:00
John, Doe
Failed
Error:
Couldn't switch the mailbox into Sync Source mode.
This could be because of one of the following reasons:
Another administrator is currently moving the mailbox.
The mailbox is locked.
The Microsoft Exchange Mailbox Replication service (MRS) doesn't have the correct permissions.
Network errors are preventing MRS from cleanly closing its session with the Mailbox server. If this is the case, MRS may continue to encounter this error for up to 2 hours - this duration is controlled by the TCP KeepAlive settings on the Mailbox server.
Wait for the mailbox to be released before attempting to move this mailbox again.
MapiExceptionMailboxInTransit: Unable to open message store. (hr=0x80004005, ec=1292)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=163]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=264][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropLogon [254]
    Lid: 17082   ROP Error: 0x50C
    Lid: 26937
    Lid: 21921   StoreEc: 0x50C
    Lid: 27962   ROP: ropExtendedError [250]
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 26426   ROP: ropLogon [254]
    Lid: 22787   Error: 0x0
    Lid: 13032   StoreEc: 0x8004010F
    Lid: 25848
    Lid: 7588    StoreEc: 0x8004010F
    Lid: 25840
    Lid: 6564    StoreEc: 0x8004010F
    Lid: 50999
    Lid: 2567    StoreEc: 0x50C
    Lid: 19452
    Lid: 2199    StoreEc: 0x50C
    Lid: 56415
    Lid: 48223   StoreEc: 0x50C
    Lid: 17097   StoreEc: 0x50C
    Lid: 8620    StoreEc: 0x50C
    Lid: 1750    ---- Remote Context End ----
    Lid: 26849
    Lid: 21817   ROP Failure: 0x50C
    Lid: 26297
    Lid: 16585   StoreEc: 0x50C
    Lid: 32441
    Lid: 1706    StoreEc: 0x50C
    Lid: 24761
    Lid: 20665   StoreEc: 0x50C
    Lid: 25785
    Lid: 29881   StoreEc: 0x50C
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.140).aspx?v=14.3.224.2&t=exchgf1&e=ms.exch.err.Ex7E66C2
Exchange Management Shell command attempted:
'ab.ad/CD/Users/doe, john' | New-MoveRequest -TargetDatabase 'Carlsbad_Mailbox'
Elapsed Time: 00:00:00
At this point, when trying to access the mailbox, exchange states its being moved... when trying to remove the move... Exchange does not see the move.
any help is appreciated,

Hi Cudflyn,
Base on my search, you can try to increase the TCP Keep Alive Time for the servers involved in the move.You can refer to the following
article to increase it:
Mailbox Move Error - 'Couldn't switch the mailbox into Sync Source mode'
Note: Just REMEMBER to DELETE the registry entry when the mailbox moves are compete!
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Distribution of Mailbox Move Batches

Hello
We are in the middle of an Exchange Server 2007 > 2013 Migration.
We have a single DAG with 4 Mailbox Servers, 2 active, 2 passive between sites (fast link)
We tend to manage Mailbox Moves remotely using ISE & "new-migrationbatch" etc etc.
There is no information on the batch as to which Mailbox Server is actually doing the work of moving the mailbox and I can only presume that the Server hosting the active TargetDatabase of the mailboxes that are being moved will be.
We wondered if anyone had any recommendations or experience of running migration batches from the Servers themselves, adn if we did if we could expect to see performance improvements?
Thanks

Hi Rob,
Based on my knowledge, Exchange 2007 Mailbox server can't communicate with Exchange 2013 Mailbox server directly. They communicate with CAS server at first, and then the Mailbox server. For more information about communication between Exchange 2007 and Exchange
2013, here is a blog for your reference.
Client Connectivity in an Exchange 2013 Coexistence Environment
http://blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Inter-Org Mailbox moves from Exchange 2007 to Exchange 2013

G'Day All,
Is it possible to move Exchange 2007 mailboxes to Exchange 2013 in a different forest? Both environment has all the required patches and service packs.
There is a two way trust, and I don't want to introduce Exchange 2010 CAS in the source forest if I don't need to.
I have read the following article http://msexchangeguru.com/2013/11/03/e2013crossforestmigration/ but it is not clear what is the required to setup in Exchange 2007. I have read many other articles to do with Exchange 2013 mailbox moves, endpoints,
etc, but non of them is clear of how does it work having Exchange 2007 source.
Thanks in advance.

Hi Atonal,
Could you please take a look at this technet blog that has been well elaborated about your concern :
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
The blog provides step-wise assistance while you are planning to move from exchange 2007 to 2013.
Here is another library available from technet team that includes all the terms while preparing mailboxes for cross-forest move request : http://technet.microsoft.com/en-us/library/ee633491%28v=exchg.150%29.aspx
Alternatively, you can checkout this proficient application (http://www.exchangemigrationtool.com/) in order to avoid any interruption and proceed hassle-free migration from exchange 2007 to 2013.

Mailbox Move from Exchange 2007 to Exchange 2013

I was surpprised to see that when I move mailboxes from exchange 2007 to Exchange 2013, that the mailbox being moved does not get disconnected during the move process (client Outlook connection). That is great news but supprising to me. I know
moving from 2010 - 2013 or 2013 - 2013 is a background process. Did something change with this recently or has it always been this way? Does the mailbox move flag inside the mailbox just jet ignored?
Thanks

When you do a mailbox move it stays connected during the initial sync. Once the initial sync is performed, there is another phase where it completes the mailbox move (basically updates some AD attributes) when this piece happens users will not be able
to access their mailboxes.
You can control this behavior by setting the SuspendWhenReadyToComplete
switch either by command line when creating the move request via the EMS
https://technet.microsoft.com/en-us/library/dd351123%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396
Or if you are doing this via the the EAC select "Manually Complete the batch" option before starting the move.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Multiple eventlog errors after mailbox-move to Exchange SP1

After a mailbox move completes on a Exchange 2013 SP1 server, multiple errors are logged in the eventlog. I opened a ticket with MS Support and they confirm this is a bug in SP1, but the moves itself aren't affected. They state the errors can be ignored.
About 10 error per move are being logged.
These are the errors occurring after completion of a mailbox move:
Event 1003:
An asynchronous Microsoft Exchange Server Information Store task has not handled an Exception gracefully. Exception text is (Microsoft.Exchange.Server.Storage.Common.StoreException: ErrorCode: NotSupported, LID: 43296 - Invalid counter range allocation at
this time.
at Microsoft.Exchange.Server.Storage.StoreCommonServices.ChangeNumberAndIdCounters.AllocateCounterRange(Context context, Mailbox mailbox, UInt32 rangeSize, Boolean separateTransaction, StorePropTag propTagCounterRangeUpperLimit, PhysicalColumn
nextUnusedCounterPhysicalColumn, GlobcntAllocationCache& allocationCache, Boolean& needNewGlobCountSet, UInt64& globCount)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.ChangeNumberAndIdCounters.AllocateCounterRange(Context context, Mailbox mailbox, UInt32 rangeSize, Boolean separateTransaction, StorePropTag propTagCounterRangeUpperLimit, PhysicalColumn
nextUnusedCounterPhysicalColumn, GlobcntAllocationCache& allocationCache)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.ChangeNumberAndIdCounters.AllocateChangeNumberCounterRange(Context context, Mailbox mailbox, UInt32 rangeSize, Boolean separateTransaction)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.Mailbox.GetNextChangeNumber(Context context)
at Microsoft.Exchange.Server.Storage.LogicalDataModel.Folder.Save(Context context)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.Mailbox.Save(Context context)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.MailboxTaskContext.EndTaskRequest(Boolean commitTransaction, Boolean pulseOnly)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.MailboxTaskQueue.RunMailboxTaskStep(MailboxTaskContext mailboxTaskContext, QueueItem queueItem, Func`1 shouldTaskContinue)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.TaskExecutionWrapper`1.<>c__DisplayClass6`1.<WrapExecute>b__5(TaskExecutionDiagnosticsProxy diagnosticContext, TTaskContext taskContext, Func`1 shouldCallbackContinue)).
Event 1050:
Global counter allocation in mailbox 3add23e8-7a32-4fb5-bc32-f5b1eae7f98c on database 0afbb5dc-b967-4ebd-acb0-15f85b8bad53 by source MailboxTask during operation 28 on call stack at Microsoft.Exchange.Server.Storage.StoreCommonServices.ChangeNumberAndIdCounters.AllocateCounterRange(Context
context, Mailbox mailbox, UInt32 rangeSize, Boolean separateTransaction, StorePropTag propTagCounterRangeUpperLimit, PhysicalColumn nextUnusedCounterPhysicalColumn, GlobcntAllocationCache& allocationCache, Boolean& needNewGlobCountSet, UInt64&
globCount)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.ChangeNumberAndIdCounters.AllocateCounterRange(Context context, Mailbox mailbox, UInt32 rangeSize, Boolean separateTransaction, StorePropTag propTagCounterRangeUpperLimit, PhysicalColumn
nextUnusedCounterPhysicalColumn, GlobcntAllocationCache& allocationCache)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.ChangeNumberAndIdCounters.AllocateChangeNumberCounterRange(Context context, Mailbox mailbox, UInt32 rangeSize, Boolean separateTransaction)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.Mailbox.GetNextChangeNumber(Context context)
at Microsoft.Exchange.Server.Storage.LogicalDataModel.Folder.Save(Context context)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.Mailbox.Save(Context context)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.MailboxTaskContext.EndTaskRequest(Boolean commitTransaction, Boolean pulseOnly)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.MailboxTaskQueue.RunMailboxTaskStep(MailboxTaskContext mailboxTaskContext, QueueItem queueItem, Func`1 shouldTaskContinue)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.TaskExecutionWrapper`1.<>c__DisplayClass6`1.<WrapExecute>b__5(TaskExecutionDiagnosticsProxy diagnosticContext, TTaskContext taskContext, Func`1 shouldCallbackContinue)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.MailboxTaskQueue.WorkerTaskCallback(TaskExecutionDiagnosticsProxy diagnosticsContext, Func`1 shouldCallbackContinue)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.MailboxTaskQueue.WorkerTaskCallback(TaskExecutionDiagnosticsProxy diagnosticsContext, MailboxTaskQueue mailboxTaskQueue, Func`1 shouldCallbackContinue)
at Microsoft.Exchange.Server.Storage.Common.Task`1.Invoke()
at Microsoft.Exchange.Server.Storage.Common.SingleExecutionTask`1.Invoke()
at Microsoft.Exchange.Server.Storage.Common.Task`1.<Worker>b__0()
at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch[T](TryDelegate tryDelegate, GenericFilterDelegate filterDelegate, GenericCatchDelegate catchDelegate, T state)
at Microsoft.Exchange.Server.Storage.Common.WatsonOnUnhandledException.Guard(IExecutionDiagnostics executionDiagnostics, TryDelegate body)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
is temporary not allowed.

Here's the technical descpription from MS support:
Description of problem: “During the mailbox move finalization stage the Store move is finalized followed by MRS move. In this state MRS executes MRS specific functionality. The state might take
a pretty long time in some cases. During this state the destination mailbox cannot be changed. The defensive code on the global counters depicts that the task with task ID 28: TaskTypeId.PropertyPromotionBootstrap is trying to allocate new global counter values
as seen in the event below.”
This is not a critical issue, and the production team also suggest safely ignore this warning, also they are now making progress to fix this issue, hoping to release the solution in the next CU or SP.
Frank.

Exchange 2013 shell mailbox move requests showing up on 2010 hub server

We're in the process of migrating from exchange 2010 to 2013. All servers are patched and up to date. We have two 2010 CASs (one for external OWA use only) and a mailbox cluster. Our exchange 2013 setup is almost a mirror with the exceptions of how the exchange
server roles have changed.
Any new-moverequest commands entered from the either of our exchange 2013 CAS servers fail to show up in the EAC/recipients/migration page.
If the local move request is done in the EAC the batch(es) show up just fine.
The more perplexing part is: while I was going through a 2010 hub (looking for a different issue) I noticed ALL the batches/mailbox moves that weren't showing up in the 2013 EAC were listed in the 2010 move request section.
I can't get any info on the moves in the 2010 console (because they're 2013 jobs) but i can get statistics and such from a 2013 shell.
any ideas?

Are you running ex2013SP1 CU6? Can you try to update n check?
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Exchange 2013 CAS incorrectly proxying after mailbox move to Exchange 2013

Hi,
I am moving Exchange 2010 mailboxes to Exchange 2013 SP1 in production. When I move 2010 mailbox Outlook, OWA works fine right after the move but ActiveSync (HTTPProxy log shows
on CAS 2013 server that it is still re-directing it to Exchange 2010 CAS servers). Exchange 2013 CAS server ActiveSync takes hours before it starts to see that mailbox is moved to Exchange 2013. I am certain it is not ActiveDirectory replication since all
other clients are working.
This time I move another user this time it did not work for 3.5hrs. I had to reboot Exchange 2013 CAS server after that it worked.
There is must be something that is not refreshing on Exchange 2013 CAS server.
Is there anything I can do right after the move to make it quick, I can not re-start server after every mailbox move. Currently we are in Pilot mode and only moving few
mailboxes at a time.
Thanks,
Raman

Hi,
I am moving Exchange 2010 mailboxes to Exchange 2013 SP1 in production. When I move 2010 mailbox Outlook, OWA works fine right after the move but ActiveSync (HTTPProxy log shows
on CAS 2013 server that it is still re-directing it to Exchange 2010 CAS servers). Exchange 2013 CAS server ActiveSync takes hours before it starts to see that mailbox is moved to Exchange 2013. I am certain it is not ActiveDirectory replication since all
other clients are working.
This time I move another user this time it did not work for 3.5hrs. I had to reboot Exchange 2013 CAS server after that it worked.
There is must be something that is not refreshing on Exchange 2013 CAS server.
Is there anything I can do right after the move to make it quick, I can not re-start server after every mailbox move. Currently we are in Pilot mode and only moving few
mailboxes at a time.
Thanks,
Raman
Does simply recycling the ActiveSync app pool speed things up?
Also, I would recommend installing CU6 instead of SP1.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Since GW 7.0.3 unable to get documents into remote mailboxes

I have the following problem.
Some users have remote access to the mailbox and library. If a new
document is created the link to the document is correctly created in
the remote mailbox. If the user tries to open or view this document he
is prompted to download it from the master mailbox. If he does this,
the document never arrives in his remote mailbox. The activity log on
the master copy of the document shows "version downloaded to remote"
but the file itself cannot be found anywhere in the remote mailbox.
Old documents, which where created earlier are viewable and open-able,
but they are not updated if the master copy changes - it is only
possible to update the master copy with changes from the remote copy.
Before updating POA and clients to 7.0.3 it seems to have worked.
Anybody having simlar issues - or a solution for this?
W. Prindl

Update: This is only true for TCP/IP (Client/Server) connections to the
master mailbox. If the connection is changed to direct (file-system
access) everything works as it should. But I would prefer not to have
to use the direct access method for updating remote mailboxes.
W. Prindl
W_ Prindl wrote:
>I have the following problem.
>
>Some users have remote access to the mailbox and library. If a new
>document is created the link to the document is correctly created in
>the remote mailbox. If the user tries to open or view this document he
>is prompted to download it from the master mailbox. If he does this,
>the document never arrives in his remote mailbox. The activity log on
>the master copy of the document shows "version downloaded to remote"
>but the file itself cannot be found anywhere in the remote mailbox.
>
>Old documents, which where created earlier are viewable and open-able,
>but they are not updated if the master copy changes - it is only
>possible to update the master copy with changes from the remote copy.
>
>Before updating POA and clients to 7.0.3 it seems to have worked.
>
>Anybody having simlar issues - or a solution for this?

Should cancelled mailbox moves result in any moved mail data removed from target server?

I was moving mailboxes from 1 DB to another. 3 out of 120 were left running for 12 hours; they were the biggest ones and it was very slow to process the items. There were also reports of slowness on the server so I had no choice but to cancel the moves.
My question is should cancelled mailbox moves result in any moved mail data being removed from the target database? It doesn't appear that my disk as increased in space again so I'm wondering if it's there as whitespace maybe? There is an event logged to say
the mailbox has been deleted from the target.
Would appreciate if someone can clear this up and possibly explain exactly what occurs during this type of scenario.
Thanks.

Hi,
Thank you for your kindly remind.
In Exchange 2000, 2003 and 2007 mailboxes become unavailable during movement, when a mailbox move takes place, the mailbox isn't actually moved, it's just copied to the destination location. Once that copy has finished, AD is updated to point to the new location
and the old mailbox is deleted from the source EDB file.
The most different between Exchange 2010 and legacy version in move mailbox is that allows end-users to be online in their email accounts. On completing the move users just needs to reopen their Outlook clients.
Mailbox Move Requests are a new feature set of Exchange 2010 and requires running a series of Cmdlets to perform asynchronous online mailbox moves with the help of a service agent called Mailbox Replication Service (MRS). MRS is available on all Exchange 2010
Client Access Servers.
Best Regards,
Allen Wang

Mailbox move during DAG failover is stuck

I have a DAG setup on exchagne 2010. I had several mailbox moves going, some in progress and some queued. The destination mailbox database failed over to a different server. Now the inprogress and queued moves are stuck and I cant
suspend them. Any suggestions would be great.
Thank you

I have a DAG setup on exchagne 2010. I had several mailbox moves going, some in progress and some queued. The destination mailbox database failed over to a different server. Now the inprogress and queued moves are stuck and I cant
suspend them. Any suggestions would be great.
Thank you
At some point they should resume.
What does get-moverequeststatistics show for the status?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Mailbox Move ForceOffline Parameter

Hell all,
scenario: Exchange 2013 RTM CU3, Exchange 2013 SP1 DAG
I'm trying to find a way to speed up Mailbox moves (local - from the RTM to the DAG environment) and I've pretty much exhausted all options I am aware of (MRS parameters, TCP Chimney, RSS etc.).
The one thing I haven't tried is the ForceOffline parameter, but unfortunately this switch appears to be very poorly documented.
Does anyone have any experience doing mailbox moves in "offline mode"? Does it speed up the transfer? Are the mailboxes automatically put back in "online mode" after the move?
Thx in advance!
M.

Hi,
ForceOffline forces a mailbox move to be performed in offline mode, meaning the user will have no access to email during the mailbox move. There is no official article explaining that it speeds up the migration using ForceOffline parameter. Your understanding
will be appreciated.
What's more, after finishing the migration, users will have access to email. In other words, mailboxes put back in "online mode".
Hope my clarification can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Mailbox Move stuck on StatusDetail Relinquished

Hi,
I am trying to do mailbox moves from Exchange 2010 SP3 to Exchange 2013 CU5. This morning they were working great for a few users with no issues. Mailboxes were about 1GB.
Now when I move a mailbox it goes into a StatusDetail of Relinguished and does not proceed past 0%
What does this status mean? Should i restart the Mailbox Replication Service? I was not sure about restarting the service as I have live users and dont want to disconnect them from their mailboxes..
Please help..

Hi,
Per my known, online mailbox moves are supported between Exchange 2010 databases and between Exchange 2007 SP3 and Exchange 2010 databases.
If you move mailbox in Exchange 2013, users can't access their mailboxes during mailbox move. I recommend you migrate mailbox off business hours.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Remote mailbox move

Similar Messages

Maybe you are looking for