Remote Panel server monitoring and control by multiple users

Hi . . . ..
              I just did what is in below attached image. . . . Now I have to control as well as monitor the VI file which is in server PC. But If I supposed to use below steps(please refer image), the clients can be control the VI seperately. But the status of each client cannot be monitored by server PC. I used another way that is "Non-reentrant" option... But its provide controlling by queue manner. . . . .
My question is, is there any possible to control the server VI at a time by all clients. . . .?
Please guide me for this... I am very much thankful about this. .. .. ..
Attachments:
image.png ‏23 KB

iPhoto has no Cross Platform ability whatever. It's designed with one user on one Mac in mind. It's not the app you want for your set up. Sorry but that's the way it is.

Similar Messages

  • How to create remote monitor and control webpages using cFP2220

    Hi all,
    I'm fresh user using compact field point. I would like to make cfp2220 as a web server, so other PCs can using IE to monitor and control through web browser.
    Moreover, does the webpages support security? and how to setup?
    Thanks,
    Regards,
    Robert

    Hi Robert,
    You can use LabVIEW Web Services to set up a system like you describe, and there is also information available on how to secure your Web services.
    I hope this is helpful.
    Regards,
    Stephen S.
    National Instruments
    Applications Engineering

  • Home Monitoring and Control with a third party also monitoring and controllin​g?

    I was wondering if anyone has tried to install Home Monitoring and Control with a third party monitoring, and or controlling the same devices. I know many systems offer multiple control points such as auxilary control touch screens. Has anyone made this work? I have Z wave devices on my home security system (lighting), and would also like to monitor them via Verizon. Possibly also adding some energy monitoring and control, that is not available via my security company. My security monitoring company provide support through Alarm.com, but has limited energy monitoring to thermostat control and such.
    The only interactive control with my security company is for alarm monitoring and control, with limited lighting control. All of my devices are GE in the wall mounted lighting controls, and I would prefer to pay Verizon the few extra dollars for the additional features VIA the web, rather than pay Verizon. There used to be an energy package, that included the main power panel load and I thing Thermostat, but I believe some of the bundles have been split up.
    There are other options out there now, but I have neen exploring. My GE Switches are from the Lowes Iris system. Much less expensive, and can replace existing wall switches, not like the power cord switches. Plus the store is four miles from my house.

    I started with Verizon home monitoring, but if you read through the threads the service is extremely unreliable, still to this day. I am stillusing it, although I am waiting for a refund on the services that I have used since it is so bad but I bought a MiCasaVerde Vera3 system.  You pay appoximately $300 for the unit and there is no monthly charge and you get all the features plus pretty much unlimited types of z wave devices to use on it. I would seriously consider using that before Verizon.

  • Would like to monitor and control a labview application with a hand held device.

    Would like to monitor and control a labview application with a hand held device.
    Would like to use a palm or ipac on a local area network or communicate directly with the PC running windows.

    LabVIEW doesn't run on a hand held device. But, check out these documents:
    Is it Possible to Use Remote Front Panels to Control a LabVIEW VI Remotely Using my PDA?
    "What OS is recommended for LabVIEW to run on a PDA?"

  • What are the network requirements for the Remote Panel Server?

    What are the network requirements for the Remote Panel Server?
    I've been trying for a while now to setup a Remote Panel.  I can connect to my computers remote panel from other computers on my LAN but nowhere else.  
    When ever I use the web publishing tool it gives me a URL in this format:  http://Computer-Name.Corporate-Name.local:8086/VI-Name.html Apparently this means I have a local DNS server and this URL has no meaning from the public.
    When I try connecting with the Operate>>Connect to Remote Panel..., I get this error message:
    "Connecting to remote panel server...
    Remote panel connection refused by specified server: Make sure LabVIEW Web Server is enabled on specified server"
    I got the same error when I tried to host a remote panel from my laptop at home, on my Wi-Fi.  Is there some network or firewall setting I'm not seting?  Could it be my server or router or private network?
    My goal is to be able to host Remote Panels from my laptop while I am travailing internationally, by using 4G mobile internet.  Is that even passable?
    Solved!
    Go to Solution.

    Over_Nyquest
    Have you enabled the Remote Panel Server in the Web Server options on the server?
    Kyle B  |  Product Support Engineer  |  ni.com/support

  • Database monitoring and control i

    Hi all,
    I am looking for various options to monitor and control the database.
    Could you provide your thoughts on this.

    You will get more, faster and better responses to your questions when you learn that your questions should contain as much information about your interests as you can provide.
    What you asked about database monitoring is pretty close to posting only question mark in you post. Like this : *?*
    When you are going to car mechanic to ask him for advice about your car, you will not just tell him : I am looking for thoughts on achiving higher HP for my car,tell me ,how to do that? .
    You will obviusly tell him at least what car you have, what model, what year was made and so on. You can apply almost the same logic when asking oracle questions here.
    For zilion reasons , providing at least information about database release you are using is a 'must do' when asking a question.
    Also, your first stop when looking for info about something that is so general as your question here suggests, should be http://tahiti.oracle.com/ , where you could eventually, as in this case , after few more clicks lead yourself to this, and after that enable yourself to ask more specific and concrete question.
    By the way, your forum activity statistics are saying that you are one of those posters which is appearing here with the moto 'ask question-respond never' , and this attitude can discourage many forum members to help you because they prefer two-way communication, which you obviusly don't.

  • Monitoring and controlling wifi activity by device.

    Is there a relatively simple way to set up monitoring and controls per device on a Time Capsule-based wireless network?  For example, I might want to limit wifi access late at night by my son's iPhone or my daughters e-reader.  Or I might want to disallow internet access during certain periods for certain devices, while still allowing full access to the disk for backups via Time Machine.  I would also like to see a how much and when individual devices are using the network.  Is there an application out there for that sort of thing?

    There are some access controls for the TC available.
    Just open the airport utility, manual setup, airport, access control, and used timed access.
    But that is all that is available.
    To get download usage etc is well beyond what the TC can manage.. you will need a wireless router with 3rd party firmware, gargoyle. It will do exactly what you want. That is the only firmware or even software on the market that puts the control into a relatively cheap router.
    http://www.gargoyle-router.com/download.php
    You can get a TP-Link router for about $70 but the Netgear WNDR3700 at around $120 is a much better router for the job. This has far superior controls cf the apple routers.

  • Monitoring and controlling of Diesel Power Plant Using Labview

    Respected Sir,
    Our Project name is monitoring and controlling of Diesel Power Plant Using Labview7.1.Here we are monitoring and controlling important Diesel engine Parameters and elecrical parameters.Expecting more ideas andsupport from NI

    it s very difficult to manage each and every generators manually in a diesel power plant.we have done an inplant training in a diesel power plant from where we got idea of automating the plant.in tat plant they are using SCADA software.To reduce the complicity of hardare an unnecessary comp languages v r planning to do the same purpose in LabVIEW software as our final year project.As this s our own idea v r not more familiar with the application areas of LabVIEW in a Diesel Power Plant.Plz suggest more advantages of LabView over SCADA in tis field and also welcome innovative ideas from NI to make project simple and more useful

  • Remote panels- server running applicatio​n in log-off locked mode

    I have not used remote panels before and was pondering if they would work if the server (Win Xp) running the application goes into workstation locked mode.
    Company IT policy dictates that all PC's must go into locked screensaver mode after 15 minutes of inactivity. To reactivate, the user must log back in. Of course any applications continue to execute normally while in locked mode.
    Would another user at another PC be able to view/control the front panel of a LabVIEW exe remotely while the server running the application is in locked mode?
    Thanks
    -AK2DM
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

    The remote panel should continue to run while in locked mode.  If another user wanted to open the remote panel and view it, that should be ok too.  Remember that there are limits to the number of users that can be viewing a remote panel.  The limit depends on how many licenses you have.  info here
    Because only one user can take control of the vi.  If the second user wanted to take control (and the first user had control) then the second user would not be able to take control.  The solution to this is to set time limits on how long a user can have control.  This is a configuration setting.
    SteveA
    CLD
    FPGA/RT/PDA/TP/DSC

  • Server does not support remote panels, server overwhelme​d

    After an unknown amount of connections to remote panels, I recieve the "server does not support remote panels" error.  Often times it will further say server is overwhelmed.  It seems like sometimes we can have almost 100 succesful connections without the error and sometimes just only 10.  
    Ive combed over all other similar posts regarding this error and most others seem to have an issue with the initial connection, not after numerous succesful connections. 
    This error can be resolved by restarting labview; however, restarting means interupting some physical processes that are running in our warehouse.  Is there a way to locate and empty this log that appears to be overwhelming the server?

    Thanks for the reply.
    Using Labview 2013 Full Development on windows server 2008.  IO communication done through compact field point modules.  All remote computers used to access remote VIs have been loaded with the correct runtime engine.  The issue seems to happen on the server end because once it happens, all remote computers get the same message, instead of one isolated computer having an issue. 
    There doesn't really seem to be a pattern to this error occuring(to my knowledge).  Sometimes we can go a week or two without seeing it, other times, a few days.  We upgraded to labview 2013 and the new server almost a year ago.  This error didn't start happening until after about 4 or so months of use. 
    I came across this knowledgebase earlier this week and have verified that all of our settings are correct.
    Thanks again for the reply!

  • Monitoring and controlling the Tag values of Logix 5000 using Labview while using RSLogix 5000 to program the PLC

    Hi
      I want to know how to change the input bits or tags of a PLC which is programmed using RSlogix 5000. But I need to use Labview to monitor the input bits ( like in Digitial Input bits) and then be able to change the BITS while the PLC runs and the PLC should be able to detect the change in input bits and act accordingly. The programming is done using ladder logic and its done in RSLogix 5000 and dumped into PLC using RSLogix.
    Thanks in advance

    msu,
    Once you have the OPC server up and running the best way to communicate with is is through the Datalogging and Supervisory Control module for LabVIEW.  The DSC module allows you to bind shared variables to items on your OPC server.  Then you could just read from or write to these shared variables to access the data on this OPC server.  If you don't want to get this module you could also just use datasocket to read/write from an OPC server.  The URL you would use in data socket would look something like "opc://localhost/{your opc item's address}".
    -Justin D

  • Server Monitor and servermgr_xserve retain count in system.log

    We've got 4 Xserves G5s on 10.5.4 all exhibiting this behavior. As soon as we open Server Monitor, we get this message in the log files repeatedly:
    Jul 3 10:28:46 krusty servermgrd[55]: --Module servermgr_xserve's response has retain count of 1.
    Jul 3 10:29:16: --- last message repeated 2 times ---
    It doesn't seem to have any impact on the performance or the server stability so I just ignore it, but I don't want to miss something important if it gets lost in all of these seemingly unimportant messages. Has anyone seen similar behavior and know of a way to stop this logging (short of closing Server Monitor)?

    Did you set up this Xserve as it came from Apple, or did you take an existing 10.5.x image and lay it onto the Xserve? The latter may not have the relevant components in the image... hwmond is an Xserve-only component.

  • CF8 cfthread, server monitor, and active threads

    When I run this code:
    cfthread
    part III or any cfthread without a thread join and then go to
    the CF Administrator -> Server Monitor -> Statistics ->
    Active ColdFusion Threads, I don't see the threads ever going away.
    They just build and build everytime I run it. I can get it to
    go all the way up to 400+ threads and stay there untill I restart
    Jrun. I think this is a monitor issue because I'd hate to think
    those threads are tied up and still active.
    Thoughts?

    Neo,
    I have noticed the same thing. Now for the odd part. If you
    click the 'start monitoring' button and then run your thread test,
    the threads don't appear in the Active Coldfusion Thread report!
    When running our application, I noticed the Coldfusion thread
    count getting up to 80,000+ threads in the span of a couple of
    hours. If we can't figure out what is causing this, we are going to
    downgrade back to CF7

  • MDB unable to listen anymore after remote JMS server crashed and restarted

    I'm running Weblogic Server 8.1 SP4 on a Win 2k server. My remote JMS server is running Sonic 6.0 on a Win 2k server. Both are connected in the same network. My problem is that whenever I restart the JMS server after it crashes (improper shutdown), my MDBs will not be able to listen to any messages sent to the topic/queue. WL console does not display any error about MDB unable to connect to the topic/queue as if the JMS server was never down. I have to re-deploy my apps in order to get the MDBs working. Is there a workaround or patch for this 'bug'?

    The options I can think of are:
              (1) Configure a WebLogic messaging bridge that runs in "synchronous" mode for forwarding messages from Sonic to a WL destination. Then change MDB to refer to the WL destination. Alternatively, if you haven't already, try using a transactional MDB - which may or may not use synchronous receives to get messages from Sonic (depends on the version of Sonic I believe). The reason I think this might help in either method is that I think the use of synchronous receives may yield a better chance of detecting failures in Sonic.
              (2) See if Sonic itself requires a patch.
              (3) Try out WL 9.2 instead of WL 8.1 (it may be that the Sonic work-around I vaguely recall isn't in 8.1???)
              (4) Contact customer support.

  • Importing Photos and Music from Multiple users on the same Mac

    I am the same person with multiple users on one iMac. I need to have the same pics and music files on all of the user names on the one computer.
    I have the family pack MobileMe plan.
    Where are the files located for the photos and music in iTunes?
    I would like to import them from one user to another user on the same computer.
    Thank you

    Welcome to the Apple Discussions.
    If you Import the files from one User to another then you will use double the disk space on your HD as you will have multiple copies of everything. Why not simply share the files between accounts?
    For iPhoto 09 (version 8.0.2) and later:
    What you mean by 'share'.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
    Remember iPhoto must be running in both accounts for this to work.
    If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
    Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
    (You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
    In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
    However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
    Regards
    TD

Maybe you are looking for