Remote Site malfunction after moving to different server
We had to move the remote site from one server to another by backing up the current remote site and restoring it on another server. Since then the users on that remote site are unable to receive notifications. The tickets are coming over just fine. On the central site under the remote sites and agents setting page, when you click on the site name it is still trying to go to the old server but according to the remote site everything is communicating properly. I need to do one of two things:1. Edit the central site so that the link points to the correct location under the remote site setting page2. Delete the remote site on the central server and re-establish the connection from the remote site. I'm not sure what that will do to the data so I was hesitant to do this one.Does anyone know how to accomplish the first option or should I just...
This topic first appeared in the Spiceworks Community
Please share what task fails, profile your network speed, and the new environment specs.
Also depends on SSIS version you can have (in 2012 and above) the operational reports that indicate each tasks speed, otherwise add more logging.
On the surface, the issue is with the network speed or how busy the new machines are.
PS: you shared too few details to be of more help
Arthur
MyBlog
Twitter
Similar Messages
-
Pulling data from a second sharepoint site that is on a different server
Hi,
I need to pull some news stories located in a list on a separate sharepoint site on a separate server. I will also be filtering the stories pulled using a custom column on the list on the source site. Can anyone tell me what would need to configure
to be able to do this?
thanks,
Sherazad
SherazadHi,
According to your post, my understanding is that you want to pull data from a second SharePoint site that is on a different server.
If the two servers are in the same domain, you can enter the site url in the brower directly.
If the two servers are in the different domains, you need to create a trust between the domains.
More information:
http://stackoverflow.com/questions/12780886/cross-domain-access-in-sharepoint-2010
http://www.boostsolutions.com/blog/how-to-add-trust-domains-in-a-sharepoint-farm/
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support -
SM59 "Remote Logon" malfunctions after server migration
Hi all,
Originally our BW server is running under I386 platform. And the server seems not powerful enough, so we decided to migrate the server to IA64 platform.
After we migrated the server to the IA64 platform, we've performed some basic checking, including SM59 check. But problem occurs.
After I choose one of the RFC destination from SM59, I CAN execute the "Connection Test" and "Unicode Test" correctly. But when I press the button "Remote Logon", nothing happens.
I've also checked for the developer trace and nothing can be found. So I have also updated the Kernel to the latest version but the result is still the same ("Remote Logon" malfunctions).
Do you have any idea?
Many Many Thanks.
Best Regards,
Marco> Originally our BW server is running under I386 platform. And the server seems not powerful enough, so we decided to migrate the server to IA64 platform.
Oh - IA64 - x86_64 would have been as powerful (or even more) and cheaper but neverless - to your problem:
> After I choose one of the RFC destination from SM59, I CAN execute the "Connection Test" and "Unicode Test" correctly. But when I press the button "Remote Logon", nothing happens.
Is the user provided a DIALOG user on the remote system? If not, then you can't logon.
Markus -
Time machine is deleting all my old backups after moving to different iMac
Hi - I had to move my data to a different machine and so I prepared a different iMac (early 2008). This is what I did:
I booted into Snow Leopard from my DVD
erased the HD
installed SL 10.6
booted into SL
ran software update to upgrade to 10.6.8 (to get the App Store)
installed Mountain Lion 10.8.2
used Migration Asistant to restore all my data, apps, and settings from my time machine backup
This all worked fine and at some point time machine asked me whether to inherit the time machine history. I confirmed this and all seemed fine until I noticed that time machine was backing for a long time and a lot of space was being freed on the time machine volume. I found that it was deleting all my old backups. Before I had data going back to 2010 but now I only have backups left from JAN 2012 onwards.
After some searching I found the excellent Pondini time machine site and performed the actions under B6 ("Reconecting" to your backups):
exxi:~ michael$ sudo tmutil inheritbackup /Volumes/tm2/Backups.backupdb/exxi
Password:
exxi:~ michael$ sudo tmutil associatedisk -a / /Volumes/tm2/Backups.backupdb/exxi/2013-02-03-150320/exxi_hd
I restarted the backup after applying the command above but it still is deleting old backups. I tried the same comand by associating it with an older backup but still it keeps deleting my backups.
What can I do to stop it from erasing all my backups?
Cheers
MichaelJust found this info in the Backup dashboard widget:
Starting manual backup
Backing up to: /Volumes/tm2/Backups.backupdb
Inheritance scan required for /, associated with previous UUID: [deleted]
Event store UUIDs don't match for volume: exxi_hd
Deep event scan at path:/ reason:must scan subdirs|new event db|
First backup after disk inheritance for / - complete scan required
Finished scan
Found 839161 files (154.88 GB) needing backup
188.83 GB required (including padding), 145.37 GB available
Deleted backup /Volumes/tm2/Backups.backupdb/exxi/2012-03-04-160328 containing 2.25 GB; 147.63 GB now available, 188.83 GB required
Deleted backup /Volumes/tm2/Backups.backupdb/exxi/2013-02-05-181442.inProgress/57E7F008-929C-4 DF8-B062-F034FEE7A606 containing 4 KB; 147.63 GB now available, 188.83 GB required
Deleted backup /Volumes/tm2/Backups.backupdb/exxi/2013-01-07-112745 containing 130.8 MB; 147.76 GB now available, 188.83 GB required
Removed 3 expired backups so far, more space is needed - deleting oldest backups to make room
Deleted backup /Volumes/tm2/Backups.backupdb/exxi/2012-03-11-191620 containing 2.08 GB; 149.86 GB now available, 188.83 GB required
Removed 4 expired backups so far, more space is needed - deleting oldest backups to make room
Backup deletion was canceled by user
Deleted 4 backups containing 4.46 GB total; 149.86 GB now available, 188.83 GB required
Backup date range was shortened: oldest backup is now Mar 31, 2012
Backup canceled. -
No data in web analytics report after moving to new server
Hi,
I have a Sharepoint 2010 portal, we need to move that portal to a new server.
For this, I took the backup of the Web Analytics Reporting db and Staging db and restored them in the SQL of new server. Then, I created new Web Analytics Service Application on the new server with reference to the restored databases.
Now, when I go to check Web Analytics report, there is no data in it.
Is this because the url of my portal is now changed? Will I be able to get all my data when I change the AAM of new server to the old portal's url?
Kindly helpHi,
I wonder if Data exists starting from the date of finishing moving. If not, then please make sure Web Analytic is working in your environment.
You could also check ULS log for relevant error information.
Here is a similar issue for your reference:
http://sharepoint.stackexchange.com/questions/42881/web-analytics-in-central-admin-not-showing-all-data
More information:
http://blogs.msdn.com/b/sharepoint_strategery/archive/2012/03/16/troubleshooting-sharepoint-2010-web-analytics.aspx
http://blogs.technet.com/b/manharsharma/archive/2012/10/13/sharepoint-2010-web-analytics-troubleshooting-reporting-db.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
RAS SDK via ASP not working after moving to 2008 server
I had:
Set ObjFactory = CreateObject("CrystalReports115.objectFactory.1")
after going to crystal reports 2008 server it failed, so I changed it to :
Set ObjFactory = CreateObject("CrystalReports12.objectFactory.1")
and that worked..
then the next lines:
Set RptAppSession = ObjFactory.CreateObject("CrystalReports115.ReportAppSession")
RptAppSession.Initialize
failed after going to crystal reports 2008 server, so I changed it to:
Set RptAppSession = ObjFactory.CreateObject("CrystalReports12.ReportAppSession")
RptAppSession.Initialize
the failed message then changed to: Object Required
what object is required..Hi Shannon,
Unfortunately the COM API has been retired as of XI R2 and is no longer supported or available for development.
You will need to move to Java or .NET for your development.
Currently if you are using CR Server 2008 your only option for now is to go to Java as the .NET SDK has not been released for it as of yet. It should be out in the next few months I believe.
Jason -
Mail gone after moving mail on server
I have an IMAP account set up on a MacBook Pro running Leopard and a Leopard Server. Having set the IMAP path prefix I wanted I copied in all the mail from an old account on another server. Due to the deficiencies of Leopard this took more than a day, but it was all finished before I realised that Mail had changed the prefix and everything was one level too high. So I did what I have always done on Linux servers, I moved the mail and redirected the account to the new (correct) prefix, but unlike on the Linux servers, the whole mail folder hierarchy is NOT found. All the mail is there on the server and the IMAP path prefix is correct but the cyrus IMAP server doesn't know it's there. How can I make it 'see' the mail?
I've tried re-synchronizing and also creating a mailbox of the same name as one that does exist and then rebuilding that mailbox, but neither will 'find' the mail. However, if I then reconstruct the mail database for that user, that one mailbox now has its mail, although the received date of each message is re-written as the current time/date. So a long drawn out procedure to get an unsatisfactory result.
Isn't there a better way to tell the IMAP server and client to use all the mail that already exists in the specified location? This was never a problem with the Linux server so I can't believe it's impossible.What you've described makes no sense; renaming a folder to the same name it already had would certainly not cause the problem you describe. Was this folder in the Mail program, or on your hard drive? How many messages do you have in Mail, and what have you done so far, if anything, to resolve this issue?
Mulder -
Best Practices for Setting up a Windows 2012 R2 STD Domain Controller in a Remote Site
So I'm looking for an article or writeup similar to the "Adding Domain Controllers in Remote Sites" TechNet article but for Windows Server 2012 STD R2. Here is my scenario:
1. I want to setup the domain controller at Site A where the primary domain controller is located. The primary domain controller is Windows Server 2008 R2.
2. Once the DC is setup I plan on leaving it on our network for a few days before shipping it to remote Site B for installation
Other key items:
1. The remote Site B will have a different IP range than Site A but will be connected to Site A via a single VPN tunnel. All the DCs that replicate with each other are on the same domain.
2. The 2012 DC that I setup for Site B (same domain in same forest) will be a DHCP, DNS, and WSUS server all replicating to the primary DC at Site A
Questions:
1. What items can I setup while it's at Site A without effecting or conflicting with the existing network and domain controller? Can I setup a scope once the DHCP role is added?
2. All of our DCs replicate through Sites and Services, do I have to manually add this to our primary DC for the new DC going to remote Site B? Or when does this happen automatically when I promote the DC?
All and all I'm just looking for a list of Best Practices for 2012 or a Step by Step Guide. Any help would be appreciated.Hi,
Thanks for your posting.
When you install AD DS in the hub or staging site, disconnect the installed domain controller, and then ship the computer to the remote site, you are disconnecting a viable domain controller from the replication topology.
For more and detail information, please refer to:
Best Practices for Adding Domain Controllers in Remote Sites
http://technet.microsoft.com/en-us/library/cc794962(v=ws.10).aspx
Regards.
Vivian Wang -
DW 6 fails to upload and download after site moved to new server.
Cyberduck has same permissions and works fine, so it's not a permissions issue.
We're using the same hosting site, just a dedicated server.
Downloading DW says the file doesn't exist, but it does.
Uploading DW says it can't create the folder the file is to go into, except the folder already exists.
Here'a sample of the error messages:
DOWNLOAD:
Started: 4/17/14 9:59 AM
Path was: /u_Eng
/u_Eng/news2014-01.txt - error occurred - Get operation failed since news2014-01.txt does not exist on the remote site.
Path was: /u_Eng/_notes
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
/u_Eng/news2014-01.txt
Finished: 4/17/14 9:59 AM
Problems:
(1) Why does it want to use _notes folder to find the file?
(2) I disabled notes option for the server, and it still does it anyway. Why?
(3) I created a _notes folder, and put the file into it, and it still fails to find the file. Why?
= = = = = = = = = = = = =
UPLOAD:
Started: 4/17/14 10:08 AM
Path was: /MM_CASETEST4291
Path was: /MM_CASETEST4291
Connected to appzooz1.
Path was: /_mm
Path was: /_mm
Path was: /u_Eng
Path was: /u_Eng
Path was: /u_Eng
/u_Eng/ - error occurred - Unable to create server folder /u_Eng/. An error occurred. Please contact your administrator.
u_Eng:news2014-01.txt - user cancelled
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
/u_Eng/
Finished: 4/17/14 10:08 AM
Problems:
(1) The u_Eng folder already exists, so why can't it find it and use it?
(2) SFTP account settings are the same as used in Cyberduck, and it has no problem with putting and getting files AND in creating folders. So, why is DW failing here as well?
THOUGHTS ANYONE?
--- RobertIf Cyberduck can connect but DW can't, you might need to toggle settings under More Options. See screenshot.
Nancy O. -
Adding a Server 2008 R2 Domain Controller at a remote site
Hello. I have been trying to set up a hot site at a remote location. The story is long and involved but a few weeks ago it seemed to be finally working. Our setup is two mirrored 2008 R2 servers at main site, mirrored with Double Take.
The hot site is the same except that so far I only had one server working. The two sites connected via site to site VPN.
About a week later our primary server basically crashed. At first it worked but very slowly. I was on vacation at the time and so I am not sure of the sequence of events, or exactly what errors were presented, but my associate first tried rebooting.
It took over 20 minutes to boot and then it said something to the effect that no domain controllers were available (not sure about this message). He then discovered that the server at the remote site had some fsmo roles assigned to it. He transferred
the roles to the primary at the main site and then demoted the remote server to a workstation (but still a domain member).
After that, rebooting the primary was much faster and everything at the primary site is working again. Now I want to set the remote site up again, but avoid the problem. The way I originally set up the remote server was to use an IFM file, generated
from our primary. This should have made the remote server a catalog server, with DNS (which it did), but as far as I know should not have transferred any fsmo roles.
The remote server(s) are wanted to be in the same domain as the primary. They will also be mirrored from the primary (with Double Take). If we had total failure at the main site, we wish to be able to immediately begin operations at the hot site
(after a fail over). I freely admit that I am swimming out of my depth here. I am not sure that I have selected the correct architecture or used the correct options in setting up the remote servers. I am looking for information about what
went wrong, and whether some other setup is more desirable.
Thanks for any help, Russ
RussPhilippe, thank you for you answers. I do not understand everything you said but I will address each point as best I can:
1. "In the remote site do you simply do a dcpromo / add the ADDS's role to make the server a active Domain Controller ?" Yes, but I use the method described at
http://technet.microsoft.com/en-us/library/cc753720(v=ws.10).aspx, The GUI method. At step #8 I specified to use advanced mode so I could use the IFM file.
2. "In your AD' Site and Service MMC, do you configured the remote site ?" R do not know what you mean by this. How does one configure the site as 'remote'?
3. "Do you added that remote server as a Global catalogue ?". Yes, when I built the IFM file I specified to add the global catalog.
4. "Do you added the PC in site 1, the IP of those DNS server in them ? (last of course) So the computer in the main site will talk to the remote server in case of a crash." I am not sure I understand this item. After the remote server
was added, all of the members of both domain servers automatically appeared in the DNS of all servers in the domain. I do not recall if the new items were last, but I expect that they would be.
I have since reviewed the happenings with my associate and have a little more information. The order of the problems and the actions taken are:
1. Our primary (production) system was still working but extremely slow, and he observed that the slowness was caused by a lot of traffic with the remote site. Rebooting the production server took over 25 minutes and the server to came up saying
that domain information was not available. After another 30 minutes or so he discovered that the domain data was now available and the server worked, but still slow.
2. He did not check to verify that roles were held by the remote server, but he transferred all roles from the remote to the production server using ntdsutil. I would expect that if the role was not held by the remote, the transfer command would have
shown that fact.
3. He then tried to demote the remote server but had an error that it could not be demoted because "the active directory service is missing mandatory configuration information".
4. He forcefully demoted the remote server.
5. After rebooting the production server again performance was slightly better but still slow (and the rebood was still very slow).
6. After some research he removed the remote domain controller's meta data from the production server and then rebooted the production server again.
At that point reboot was fast (under 5 minutes) and the production system was working at normal speed again.
All of the above leads me to believe that somehow the FSMO roles got added to, or moved to the remote site when I used the IFM file to create the new domain controller. However nothing I have read says that this should happen. I hope someone
here can give me a better answer as to what caused the problem, as I do not wish to interrupt our production system like this again.
Thank you, Russ
PS: Sorry for the delay in getting back to this but some other priorities took me away from it for a week.
Russ -
Having a problem with the photos showing up after moving everything to another server.
Greetings,
I used an older version of iWeb to create several websites a few years back, and would like to retain them. I followed the instructions and downloaded the five folders for the five websites on my iDisk, which took more than two hours, and then uploaded them to the server I use to host another of my websites, and made them all subdomains.
The first issue I had was a php code error for every page. Turns out I had to remove the very first part of the index.html file: <?xml version="1.0" encoding="UTF-8"?> and then everything seemed fine until I tried to go to another page. Ended up having to do this on every html page for each website.
Then I noticed that none of the pictures were showing up in the albums. I also have videos on two of the sites, and they worked fine. I checked /Photo_Albums/Pages, and inside were the folders with all the pictures, so I know they're there.
I have ruled out it having anything to do with my new server by opening the websites in Safari from their folders on my desktop, and had the same results; everything was good except there were no pictures on the page.
If anyone can help me with this I would really appreciate it! I've got 5 websites I have to get fixed in two days.
Thanks!
Take care,
~ChrisThanks Roddy, but I don't think that's it, either. When I downloaded everything from my iDisk, it automatically created 3 versions of every picture, and named them either micro.jpg, thumb.jpg, or web.jpg. They can be found in the Photo_files>Media folder, each set of three in their own uniquely numbered folder. For example, one the websites is of a friend of mines hot rod Fiero.
Here is his website via iWeb:
http://jimsfiero.com/
This is what it looks like after uploading everything to a different server:
http://jimsfiero.ricehatersclub.com/
Here's my personal website:
http://peckerwoodspitstop.com/
And here it is after uploading everything:
http://peckerwoodspitstop.ricehatersclub.com/
You can see that everything works, except where the page is a photo album.
Thoughts?
Oh, BTW, I tried Wyodor's suggestion, and it shut everything down with a 500 Internal Server Error. Removing the suggested file corrected everything. -
Second Exchange 2013 server in remote site
Just finished migrating from 2007 to 2013 and decommissioned 2007. Exchange 2013 is running in site A with 350 mailboxes on it. However, almost half of those users reside in site B so the plan is to introduce a second Exchange 2013 server to
this site and migrating mailboxes to it. There already exists a DC & GC in both sites.
My question is, immediately after I introduce Exchange 2013 into site B with CAS & MBX role, client computers from that site will start to receive certificate errors. Will updating the SCP on the new exchange server to point to the SCP on the exchange
server in site A be enough to mitigate that problem? What other precautions will I need to take? Has anybody been down this road?Hi
You can introduce the second exchange server in the remote site and also setup a DAG. If you are using the same name on your certificate like mail.domain.com then you can use the cert for your second server as well. You need to make sure you have autodiscover
records setup correctly.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
How to get result from SharePoint site which is on different server.
We have two SharePoint site on two different server. We want to create search which will search and display content of one one site on other site.
If this is possible then pls let me know how can I do this. If you have any links/blogs pls share with me.
Rushikesh_KhadtareHi ,
According to your description, my understanding is that you need to create search which will search and display content of one site on other site.
For your issue, you can deploy a "search center" site in each web app.
Any time you perform a search from a search center site, it by default searches all content (using All Content scope) in your index, regardless of web app.
Take the following steps:
* Go to Search Service Application
* Click Content Sources
* Select Edit from the Local Office SharePoint Server sites
* In Start Addresses add the urls of all web applications that you want this content source to crawl
After a crawl you should now be able to search/find data from all web applications.
Best Regards,
Eric
Eric Tao
TechNet Community Support -
How to make J2EE work after moving harddrive to different laptop shell
Hi Everyone,
After moving the harddrive from one laptop on which NWDW(developer workplace) is installed, to another laptop, my local J2EE engine is not working anymore with Red color. I guess the hardware key is different for different laptop shell although they have the same harddrive? Is there a way to change hardware key? Is there a way to make my local J2EE work without reinstalling NWDW?
Any Advise/ suggestions?
Thanks, JinHi Jin
Yes , Hardware key is different for different installation (and its key part when we extend the validity of the server), Send the log file.
Is there a way to change hardware key : You can try one workaround here that send the request for extend the validity of the server which will ask for H/W key once get put it in Instance.(try this)
At the time of installation It play with OS level ,Service registry etc ,I dont think so change the hard drive will work.
Best Regards
Satish Kumar -
How to make J2EE work after moving harddrive to different laptop -
Hi Everyone,
After moving the harddrive from one laptop on which NWDW(developer workplace) is installed, to another laptop, my local J2EE engine is not working anymore with Red color. I guess the hardware key is different for different laptops although they have the same harddrive? Is there a way to change hardware key? Is there a way to make my local J2EE work without reinstalling NWDW?
Any Advise/ suggestions?
Thanks, JinJin,
As your J2EE engine is not comming up for a second then you can't do anything. May be you have to install temporary Licence or you have to get new one.
You should ask this question in section Application Server --> SAP Newtweare AS, General forum.
Why you do not want to reinstall J2EE Application Server?
If you reinstall J2EE web AS then you have to redeploy your project from NWDS. Just reconfigure your J2EE engine setting in NWDS after you reinstall and just redeploy.
Or may be you do not have to reinstall Basis person can install new j2ee license.
Regards.
eCommerce Developer
Maybe you are looking for
-
MacBook Pro mid 2010 putting itself to sleep and restarting on wake-up?
My mid 2010 MacBook Pro has recently started having a lot of problems. It will put itself to sleep whilst I am working on it, and when I try tp wake it up it restarts showing a message saying 'Your computer restarted because of a problem. Press any k
-
Support Page not loading correctly to FTP host
I recently updated my muse and once i did that one of my supporting pages is not loading corectly now. I have 16 supporting pages and all others are working just fine. I have tried to upload on a different computer. created a new supporting page and
-
Can I get my music off of icloud and put it in my new computer?
OK. My old computer crashed with thousands of my songs on my itunes. No way to get them back. Is there anyway I get my music from icloud? If I restore my iPod from my Ipod all my music, picture is back?
-
Discounts on substitute material
Hi, I have a process that uses SD_SALESDOCUMENT_CREATE to create the sales documents on background (there are too many of them), and now I need to activate the use of substitute materials, but the substitutes are not taking the conditions entered for
-
Dear All , I have a task to include the option -S 2 for sadmind service in /etc/inetd.conf. But in Solaris 10, there is no sadmind service configured in /etc/inetd.conf and SMF as well. Please advice how to configure in sadmind service in Soalris 10.