Remote system JSP project not working in eclipse

Hi
I am developing a JSP project. My files are on a remote server and I want to configure it in Eclipse 3.3 with Lomboz. The problem is After adding the project it gives a warning that xml files can't be validated.The exact warning is
The file cannot be validated as the XML Schema "\192.168.1.10\gunjan_share\workspace\Project1\WebContent\WEB-INF\web.xml (The system cannot find the path specified)" that is specified as describing the syntax of the file cannot be located.
Due to this error JSP pages are not getting compiled.
Plz help me
Thanks

Extracted from Note 1067696.1:
You need to either adapt your code to remove the scriptlets in your JSP page,
or you can use the following Java option to disable OJSP:
-Dadfvdt.disableOjspDeployment=true
You can add this option -Dadfvdt.disableOjspDeployment=true in your file "ide.conf" in the directory "<Middleware_Home>\jdeveloper\ide\bin"
For your Production environment, you can have your Managed WLS ignoring the OJSP mode by adding the Java Option -Dadfvdt.disableOjspDeployment=true
* in the "startManagedWebLogic" (if you want to limit it to a specific Managed Server)
* or "setDomainEnv" (for all managed servers in a domain).

Similar Messages

Remote System Input Device Not Working

Hi,
when i try to connect remote system through RDP, input device (Keyboard & Mouse) in remote system is too slow, it takes more time to respond. Tried to take RDP from different system but same problem.
Looking forward for your response.
Regards
Mohan Rao R

Hi Mohan,
Since the slowness of displaying mouse movement and input from Keyboard does happen to multiple systems, seems like poor performance to me.
You may improve performance by increasing network bandwidth, reducing workload on the Terminal Server, updating video and network card drivers.
Here are some related links below for you:
Terminal Services and Graphically Intensive Applications
http://blogs.technet.com/b/askperf/archive/2009/04/17/terminal-services-and-graphically-intensive-applications.aspx
Improve the performance of connections
https://technet.microsoft.com/en-us/library/cc778760(v=ws.10).aspx
Remote Desktop into 2008 really slow
https://social.technet.microsoft.com/Forums/windowsserver/en-US/fea5450d-e8e7-4778-b5cc-6b6ff9facc7b/remote-desktop-into-2008-really-slow?forum=winserverTS
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

OC4J JSP Debugging not working for all the jsps

Hi,
Initially I was not able to debug jsps using Eclipse and OC4J. The jsp debugging started working once I made the below changes:
1) global-web-application.xml is modified
Changed the attribute development="true" in orion-web-app
Added the below init param for the JspServlet
<init-param>
<param-name>debug</param-name>
<param-value>class</param-value>
</init-param>
If the jsps are present in a sub directory under the webcontent none of the breakpoints are working. I am still be able to view the jsp pages on the browser.
Tools: Oracle 10g Application Server Standalone version(10.1.3.5.0), JDK5, Windows XP, Eclipse Indigo
Project Structure:
Test (Eclipse Dynamic Web Project)
-WebContent
Sample.jsp ( Breakpoints are working)
-subF (Folder)
SubSample.jsp (Breakpoints are not working)
-WEB-INF
web.xml
Debugging worked for http://localhost:8888/Test/Sample.jsp
Debugging not working for http://localhost:8888/Test/subF/SubSample.jsp
Any help is highly appreciated.
Regards
Danny

This tells there is not enough main memory (not disk space) for the program to run.
- You can look the dump in ST22, it will have suggestions on increasing the ROLLAREA??, you can forward that to Basis.
- Most likely you will not have any more memory to assign so the above may not be feasible. Try to rework your query so it works with less data.

HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.

HP Pavilion dv6-6181TX
Product No. A3U49PA
Genuine Windows 7 Home Premium 64
(but i upgraded it to windows 7 ultimate)
System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
so when i restart my computer and press Esc and then choose F11 i get this message :
"Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000225
Info: An error occured while attempting to read the boot configuration data."
i saw this from the forum
http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
Had the C partition been split/shrunk to form a new partition previously?
Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
please help me & Thank you for your time,
This question was solved.
View Solution.

If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
Older versions of Partiton Wizard Free work:
http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

System.out.println not working in Tomcat-4.1.x

System.out.println not working in Tomcat-4.1.24. Any settings has to be enabled??? I am using tomcat for Solaris

I think u can use ServletContext.log() to output info instased.

Systems preferences does not work

My Systems Preferences does not work, either reminders and messages... since Mavericks(10.9) Programs do not respond and Macbook air is not responding.... Help.....

Well, you are certainly correct that the fact that the "wired" machines work sure doesn't rule out a faulty router....But that's why (as part of a process of elimination troubleshooting scheme) I hooked up my old Linksys Router, and got the same results. Now...What are the odds of 2 separate routers acting the same way? Especially when both worked fine on my TIPB and even on my MBP until a few months ago. Plus, my 12 year old son can pull a wireless signal from the router on his console games (xbox360, Wii, PS3) with no problem
Believe me, my first thought was to go out and buy another router, but when I swapped routers and got the same problem, I began to look elsewhere, eventually coming here for help and knowledge.
I did the SMC reset to no avail. I'm not sure about the stuff in System Configuration....By "pull" do you mean to delete all the files in this folder? Move them to a temporary folder? Should I just deal with the folders that have "IP" in the "bundle" file name?
Any help would be greatly appreciated!
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.8) 23" Cinema Display and 8 gig on G5 Dual
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.7) 23" Cinema Display and 8 gig on G5 Dual

System restore is not working

System restore is not working for my Itouch. I am getting a picture of a white cord and and arrow pointing to Itunes logo... any suggestions?

It sounds like there is definitely a system problem. The whole OS seems to be messed up.
Do you have an MS Windows 7 disk?
In such case you could start the Windows 7 Startup Repair process using the MS Win 7 disk.
Boot from Win 7 disk, after the temporal files has been load, you should get and window where you could choose between the OS installation and other options. The second option called Repair you Computer is the one which would be needed to get the system repaired.
Then wait for System Recovery Options to locate Windows 7 on the HDD.
Then choose the Windows 7 installation and then the next window should appear providing the option to repair the system Startup Repair
But in case this workaround would not help you, the system should be reinstalled once again using Toshiba Recovery disk

In my system facebook is not working plz hepl me out fast

sir in my system Facebook is not working plz sir help me out fast plllzz

At 1st click the Facebook
button in the toolbar
and select Remove
from Firefox.
Then You will see a
confirmation dialog
asking if you are sure
you want to remove
the feature. Click
Remove Facebook
Messenger to
completely disable it.
After that Messenger should be
completely disabled.
Then Log in to your
Facebook account at
facebook.com and Visit facebook.com/
about/messenger-
for-firefox
then Click the green Turn
On button. The
messenger sidebar
will open and
confirmation
message will be
shown.and Click OK in the
confirmation
message to turn the
feature on.

Adobe Flash will not update to a W-2000 system and will not work? Is there a fix? Mozilla has disabled Flash. Do I have to go back to Explore?

Adobe Flash will not update to a W-2000 system and will not work in Firefox? Is there a fix? Mozilla has disabled Flash. Do I have to go back to Explore?

have you tried to install flash
restart imac
go to web site which require flash

Response.sendRedirect("abc.jsp") is not working

Hello,
I deployed my web application(jsp with business components) on AS 902.
Web cache is running on port 80.
Apache is running on 7778.
To pass request i use,
mod_proxy.c in http.conf. and
<virtual host> for my application, to get required url.
It is running fine, But response.sendRedirect("abc.jsp") is not working properly. It redirects the request to apache directly and skips web-cache. Also it changes url for the page given in method.
While the same application was running ok on v 10222a. That version handle this method properly.
how to remove this error ???
Plz hurry up. Our product is ready for launching on 9iAS. It is final testing.
Thnx.

Tahir,
What is the exact error message you are hitting.
Are you able to use web-cache with other examples.
Can you try testing it the the webcache demos that are part of ojspdemos.ear under /j2ee/home/demo.
-Prasad

Jsp:useBean not work when I install aplication!!

Hi
I developing an application with UIX JSP on Jdeveloper 9.0.2 and i using something like this:
<jsp:useBean id="cbean" class="oracle.jsp.dbutil.ConnBean" scope="session" />
<jsp:setProperty name="cbean" property="dataSource" value="jdbc/BiblosConnectionCoreDS" />
</jsp:useBean>
<%
try{
cbean.connect();
This code work fine in standalone mode, but when i install this application on 9IAS, with an archive War, the code <jsp:useBean, not work.
What is missing for? o What is the reason for this situation
Thanks for some help?

many thanks for your reply, and I have download new updates driver from your website (http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_890.html) and Installer it on my Y410 but it still does not work!!!
the firstly: when I star up with win7, I can see a speaker icon right down near the clock, when I click mouse on it, I can see: Volume Mixer - Speaker with Device(Speaker Hight definition Audio Device, Digital Audio(S/PDIF) ( Hight definition Audio Device) ).
Look in devicemanger I can see "Sound , video and game controll " has already installer with 'Hight definition Audio Device ' & 'Unimodem Hafl-Duplex Audio Device' below... but I cannot hear the sound when I play music, video, games...etc...
the second: when laptop wakeup after 'sleep' mode, I can hear sound on speaker! but headphone jack does not work when I plug my headphone jack into it (I cannot hear sound with headphone), however I still hear sound from speaker, in this case!
Can you help me or tell me how I can do ?!
Thanks and Best Regards,
jupitervn

System.out not working on eclipse

Greetings...
I am no longer a newbie on Java, but I have been facing an issue lately that I have been unable to resolve myself, even though it seems to be something so silly.
I have been using eclipse for development, and by developing a simple "Just to practice" code I have found myself unable to use System class or any of its methods at a certain point. See the code below:
package one;
import java.util.Scanner;
public ClassOne {
public static void main (String args[]){
Scanner reader = new Scanner(System.in); /*Works just fine here*/
int x = 0;
System.out.println("Type in the number of objects expected"); /*Does not work at all, like if System was something I could not use at all. Not an identifier */
Scanner readertwo = new Scanner(System.in); /*System does not work here either*/
}Even if I rewrite the code after that, by erasing the import statement and all other System references in the code, System does not work again.
If anybody has ever faced the same issue and knows what I am doing wrong and what I can do to fix it, I'd really be grateful.
Thanks to all, and happy 2009.
Santana T

Santana_Thiago wrote:
It works on NetBeans.
On eclipse I get the following error:
ERROR: JDWP Unable to get JNI 1.2 Environment, jvm->GetEnv() return code = -2+
*JDWP exit error AGENT_ERROR_NO_JNI_ENV(183): [../../../src/share/back/util.c:820]*+
The funniest thing is that if copy and paste the code from somewhere else into eclipse it works. What a drag!!!!
Thank you.
Santana TNever seen that error but it sounds to me that your Eclipse installation is screwed up!

JSP-Editor not working properly

Hi everybody,
I am working with ISA5.0 and NWDI. I have checked out the Web-Module Project crm/isa/web/b2b.
Now I would like to modify JSP-Files. Unfortonately the JSP-Editor is not working properly.
The JSP-Editor cannot resolve references to Tag-Libraries like
<%@ taglib uri="/isa" prefix="isa" %>
Furthermore I get Errors with JSP-Includes
<%@ include file="checksession.inc" %>
The JSP-Editor does not show any other compile errors until the above mentioned errors are resolved.
So the JSP-Editor does not help with compile errors.
I have tried to use Lomboz instead, but due to the modularization in ISA5.0 and NWDI (ie the Taglibraries are defined in a separate module) I did not get it to work either.
Does anybody have experience on how to get the JSP editor to work properly?
Thanks for your help,
Andreas

Highlite the clip in the timeline, control click on it and choose "send to soundtrack as an audio file project" in the pop up menu. Don't do an "open with editor". This should work.
If it doesn't and it's just the one clip, you could launch Soundtrack and then open that clip as an audio project . . . don't do a open with editor, just open it directly. Make your adjustment and save over writing the file with the new audio. You may want to copy the clip first as a backup. When you open your FCP project, you'll have to re-link the clip. Once you do it will show up with the new sound.

Auto-Deployment is not working in Eclipse - Weblogic

I have created weblogic server instance in Eclipse.Then, I have added one project into weblogic server by using "Add/Remove Projects" menu.After I start the server , I logged into admin console and checked the deployments link. I am not finding the project listed in the list.I have selected option "Run stand alone web module directly from work space" in web logic server configuration window in eclipse.
I am using Eclipse 3.3 and weblogic 10.0.
I have no idea, why auto-deployment is not working.
I would appreciate your help on this regard.I have contacted Eclipse Support, they have asked me to contact BEA team.
Thanks,
Prakash.A

Hi Prakash,
The "Run standalone web module from workspace" doesn't publish the application to the server (instead the app is deployed to a temp location).
This is mainly to help test the app during the development stages. If your app is complete and would like to publish to the server then you might want to try the following option
- In Server View, double click on the configuration to launch Overview
- Select "Copy stand-alone web module into separate deployment folder"
- Save the configuration
- Start the server
The application would be deployed to the server as a WAR file.

Remote Desktop & Screen Sharing not working??

Hello all,
I am trying to connect to a friends computer via the Finder's Screen Sharing, I enabled the screen sharing preferences under the System Preferences, put the password, etc and had him do the same and I am not able to connect to his system. I'm sure there is something else I have to do in order to get this to work. In the Windows world I had to use the VNC. But, I remeber reading in a Snow Leopard book that this is all that had to be done in order for this to work.
Best Regards,
freesparks

I know I could never get this working between two macs of the same OS (10.5.8) over the internet with the appropriate Sharing settings set up....
Im guessing both Screen Sharing and Remote Access through iChat DO NOT work anywhere but in a LAN?

Remote system JSP project not working in eclipse

Similar Messages

Maybe you are looking for