RemoteGui.bat Login attempt failed:connection refuse to SDM

Heloo Guru's,
I am trying to deploy service via running path: D:\usr\sap\XIG\DVEBMGS00\SDM\program <b>RemoteGui.bat</b> file .
I am giving password for SDM user but error coming on clicking login button
Error:could not establish connection to server <host> at port <50018>:connection refused:connect.
Please advise.

Hi Gaurav,
You can find the SDM configuration file in \usr\sap\<system_id>\<instance no>\SDM\program\config with file name sdmrepository.sdc. In this file you will find your sdm host name and gui port number (default 50018). You change it from here and restart the server if its not set properly.
Go to the mmc, select your serve node, expand instance 0 and look at the process table, you should have dispatcher / server0 and SDM nodes with their states set as started.
It is possible that SDM was kept in standalone mode and not started with your server. If that is the case
Run sdm jstartup "mode=integrated"
restart your cluster.
Regards,
Prateek

Similar Messages

Pulseaudio problem , snd_pcm_open failed: Connection refused.

Hello everyone, i have this problem that appeared last week.
I cant play music in any player cause i get this error : snd_pcm_open failed: Connection refused.
i tried things like adding the user to audio group, creating a "pulse" user cause pulseaudio gave me an error like "pulse user" not existent .
but if i test the sound card in the kde4 audio setup it works
anyone have any ideea on how to fix this ?

just restart alsa.
sudo /etc/rc.d/alsa restart
it solved my problem.

Tcp/ip bconnection to host has failed,connection refused

Exception in thread "main" com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source) at java.sql.DriverManager.getConnection(Unknown Source) at java.sql.DriverManager.getConnection(UnknownSource)
Can anyone pls help me out .
I ve tried netstat -an port 1433 is not listed
firewall is diasbled .

You need to enable TCP services on SQL Server.

Certificate authority export fails connection refused

I am trying to export zenwork certificate and I receive the following error:
Command
zman --debug certificate-authority-export /root/cert
Error:Could not connect to the ZENworks Server. Ensure that the server is running, and the host and port information specified is correct.
Debug:
com.novell.zenworks.datamodel.exceptions.Connectio nException: Connection refused
What can I look at?

zman certificate-authority-export /root/cert --debug
Error:Could not connect to the ZENworks Server. Ensure that the server is runnin g, and the host and port information specified is correct.
Debug:
com.novell.zenworks.datamodel.exceptions.Connectio nException: Connection refused
at com.novell.zenworks.zman.exceptions.ZManExceptionH andler.createExcept ion(ZManExceptionHandler.java:286)
at com.novell.zenworks.zman.exceptions.ZManExceptionH andler.makeDataMode lException(ZManExceptionHandler.java:260)
at com.novell.zenworks.zman.exceptions.ZManExceptionH andler.processRemot eException(ZManExceptionHandler.java:390)
at com.novell.zenworks.zman.commands.CAHandler.<init> (CAHandler.java:72)
at sun.reflect.NativeConstructorAccessorImpl.newInsta nce0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInsta nce(NativeConstruct orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newI nstance(DelegatingC onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Construc tor.java:501)
at com.novell.zenworks.zman.CommandRunner.execute(Com mandRunner.java:86)
at com.novell.zenworks.zman.ZMan.executeRunner(ZMan.j ava:321)
at com.novell.zenworks.zman.ZMan.main(ZMan.java:505)
Caused by: java.rmi.ConnectException: Connection refused
at com.novell.soa.ws.portable.ApplicationException.ma pToRemote(Applicati onException.java:207)
at com.novell.zenworks.datamodel.services.zoneconfig. soap.ZoneConfigAdmi nServiceBinding_Stub.hasZENServerRole(ZoneConfigAd minServiceBinding_Stub.java:50 71)
at com.novell.zenworks.zman.commands.CAHandler.<init> (CAHandler.java:68

Best Practices to implement Login Attempts Failed.

I would like to implement the disable the user account after a certain number of invalid login, What is the best way and secure way to implement this? i do some research, some recommended to create a temporary table in database and keep track the number or invalid attempts login, is this a good way ?

Just do failedLoginAttempt++ in the User table in the database. It does not necessarily need to be a temporary table. On login just show an error when failedLoginAttempts >= someMaxValue.

Decision Service calls failing with connection refused

Hi All,
Breifing of the bpel process - Async bpel process XX_BPEL_ASYNC_002 calls decision services and a sync bpel process XX_BPEL_SYNC_001.
We have moved to cluster 10.1.3.5.0 from 10.1.3.3.0 and the deployement of the bpel process and the decision service done on two nodes i.e., node51 and node55.
But the bpel process is able to call the decision service only when the node 51 is UP and running, but if node 51 is down and node 55 is up and running it is failing with connection refused error. It is also working when 55 is DOWN and 051 is UP.
the exact error is:
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused.
We are using file based repository.
It is failing when it tries to call particular url:
http://loadbalancerurl:7777/orabpel/domain001/XX_BPEL_ASYNC_002/1.0/decisionservices.decs
Can anyone please help me or advice me for finding some solution.
Thanks
Sreejit

Hi Fatsah,
It has been a while since we resolved this problem. But these were the basic steps that we had taken.
The receiver was configured a File adatpter with FTP:
Port: 10021
Connection security : FTPS (FTP using SSL/TLS) for Control and Data Connection
Command Order: AUTH TLS,USER,PASS,PBSZ,PROT
Problem: The message was blocked in our firewall.
FTPS in this case used 10021 as the control port and the firewall allowed to pass the control request.
Once the connection was accepted at the control level, it generated a random port number to pass data on the channel.
This random port number was blocked in the firewall.
We monitored the data port numbers generated at firewall. Then we configured the firewall to open any port number between the specific IP addresses of the sender and the receiver. That resolved the problem.
Hope this helps!
Please give points if this is helpful.
Thank you.
Dharmasiri Amith

Mpd and pulse problem - Connection refused [SOLVED]

I'm having problems getting mpd to play nice with pulse-audio. Pulse is installed and works with vlc, mplayer, flash, etc. just fine. When I try to play through mpd the song in the gui simply shows a status of "paused" and the following gets written to the mpd.log.
Advice is appreciated.
# tail -f /var/log/mpd/mpd.log
Oct 08 11:12 : output: Failed to enable "pulse audio" [pulse]: pa_context_connect() has failed: Connection refused
Oct 08 11:12 : output: Failed to enable "pulse audio" [pulse]: pa_context_connect() has failed: Connection refused
Oct 08 11:12 : output: Failed to enable "pulse audio" [pulse]: pa_context_connect() has failed: Connection refused
Oct 08 11:12 : player_thread: problems opening audio device while playing "Not_So_Hard_Stuff/Disturbed-The Sickness-2000/01_Voices.flac"
Here is my mpd.conf
$ sed '/#/d' /etc/mpd.conf
music_directory "/media/data/all_genres"
playlist_directory "/var/lib/mpd/playlists"
db_file "/var/lib/mpd/mpd.db"
log_file "/var/log/mpd/mpd.log"
pid_file "/var/run/mpd/mpd.pid"
state_file "/var/lib/mpd/mpdstate"
user "mpd"
gapless_mp3_playback "yes"
zeroconf_enabled "yes"
zeroconf_name "Music Player"
input {
plugin "curl"
audio_output {
type "pulse"
name "pulse audio"
mixer_type "software"
audio_buffer_size "35000"
buffer_before_play "5%"
The pulseaudio wiki suggests that a 'pulse' group and 'pulse-access' and even 'pulse-rt' groups may be required? I have used mpd for a year now with no such groups on my system.
EDIT: solved in post #13
Last edited by graysky (2011-10-16 13:42:46)

graysky wrote:
I too modified my /etc/mpd.conf to use alsa even though I don't have alsa-utils installed at all.
$ sed '/#/d' /etc/mpd.conf
music_directory "/media/data/all_genres"
playlist_directory "/var/lib/mpd/playlists"
db_file "/var/lib/mpd/mpd.db"
log_file "/var/log/mpd/mpd.log"
pid_file "/var/run/mpd/mpd.pid"
state_file "/var/lib/mpd/mpdstate"
user "mpd"
gapless_mp3_playback "yes"
zeroconf_enabled "yes"
zeroconf_name "Music Player"
input {
plugin "curl"
audio_output {
type "alsa"
name "My ALSA Device"
mixer_type "software"
audio_buffer_size "35000"
buffer_before_play "5%"
Doesn't work for me I get this error when I try to play something with your configuration:
ALSA lib pulse.c:229:(pulse_connect) PulseAudio: Unable to connect: Connection refused
Oct 16 18:23 : output: Failed to open "My ALSA Device" [alsa]: Failed to open ALSA device "default": Connection refused

SOAP Exception, Connection refused error in jdeveloper 11g

Hello,
I am using jdeveloper 11g 11.1.2.3.0.
I have been experiencing the following error everytime I try to run the applicaiton. I use webservices in my applicaiton and recently the webservices url were changed pointing now to dev instead of the lab environment. The code has been migrated to dev environment, I tested the webservices in my browser, they seem to be working fine and are pulling up the required data.
ERROR:
javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
Error
Message send failed: Connection refused: connect
Error
Connection refused: connect
I am not sure what is causing this. Any help would be appreciated.
Thanks in advance,
Sal

Hello Frank,
Thanks for your response. I checked the browser proxy settings in Jdeveloper, nothing is set there right now. Use HTTP Proxy Server is unchecked. What do I need to set this to?
Thanks,
Sal

Fms edge connected refused with unknown reason.

i found some error logs in edge.*.log, like this.
2012-11-14 18:39:04 3903 (e)2661034 Connect failed ( , 1161928336 ) : Connect failed: Connection refused (111) -
2012-11-14 18:39:46 3903 (e)2661034 Connect failed ( , 16 ) : Connect failed: Connection refused (111) -
2012-11-14 18:40:31 3903 (e)2661034 Connect failed ( , 3 ) : Connect failed: Connection refused (111) -
2012-11-14 19:47:46 3903 (e)2661034 Connect failed ( , 16 ) : Connect failed: Connection refused (111) -
2012-11-14 19:48:28 3903 (e)2661034 Connect failed ( , 16 ) : Connect failed: Connection refused (111) -
2012-11-14 19:49:10 3903 (e)2661034 Connect failed ( , 1170349712 ) : Connect failed: Connection refused (111)
it seems because of invalid ports resulst in TCP connection faild.But abvously, these ports are not used in the applications, even some port is out of valid port range. Does anyone konws what the reason.
btw, there are two adaptors on our machine, one is for intranet, the other is for internet. And the lattter is configured with to IPs
like this:
eth0      Link encap:Ethernet HWaddr 00:21:5E:26:62:28
          inet addr:******* Bcast:******* Mask:255.255.255.0
          inet6 addr: fe80::221:5eff:fe26:6228/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:116994653 errors:0 dropped:0 overruns:0 frame:0
          TX packets:151851798 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:52655302829 (49.0 GiB) TX bytes:124235260628 (115.7 GiB)
          Interrupt:106 Memory:ce000000-ce012800
eth0:1    Link encap:Ethernet HWaddr 00:21:5E:26:62:28
          inet addr:**** Bcast:**** Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

Is there any info in the node manager log files?
You can try changing the health check timeout.
# Health Check Interval: Specify the interval (in seconds) between Node Manager health state queries to the Managed Server. Enter a value between 1 and 2147483647 seconds (default is 180 seconds).
# Health Check Timeout: Enter the number of seconds that Node Manager will await a response to a health state query. If the timeout is reached, Node Manager assumes the Managed Server is "failed", and kills the process. Enter a value between 1 and 2147483647 seconds (default is 60 seconds).

TCP DNS Connection Refused

I am testing an application which uses tcp for dns.
My ActionTec router is set to "Medium" so it should allow all outbound connections.
When I use a dns server on my network all is well. When I try to use the ActionTec for dns I get connection refused with tcp requests but udp requests go through. I suspect the dns server on the ActionTec does not support tcp but I would like confirmation in case there is a setting I can change to make it work.
$ host yahoo.com
yahoo.com has address 98.138.253.109
yahoo.com has address 98.139.183.24
yahoo.com has address 72.30.38.140
yahoo.com mail is handled by 1 mta5.am0.yahoodns.net.
yahoo.com mail is handled by 1 mta7.am0.yahoodns.net.
yahoo.com mail is handled by 1 mta6.am0.yahoodns.net.
$ host -T yahoo.com
;; Connection to 192.168.1.1#53(192.168.1.1) for yahoo.com failed: connection refused.
Thanks,
AustinPowered

Keep in mind the ActionTecs are based around the dnsmasq lightweight DNS resolver if I remember correctly. If Verizon/ActionTec is using a version of dnsmasq older than v2.10, then it is a known limitation of dnsmasq to not support TCP queries. If someone can confirm what version the FiOS routers have, that would be great. This tool may be able to identify it:
http://netalyzr.icsi.berkeley.edu/
If you'd like me to analyze it, please send me a private message with the URL to your result, unless you don't mind your IP address being given out to the forums.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Pulse Audio Not Working (Connection Refused)

Thank you in advanced for your help. I am having issues getting pulse audio to work. I have followed the wiki to a tee. However, i am getting
pactl load-module module-equalizer-sink
pactl load-module module-equalizer-sink
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
qpaeq
There was an error connecting to pulseaudio, please make sure you have the pulseaudio dbus and equalizer modules loaded, exiting.
Any help ,
Thanks

Thank you in advanced for your help. I am having issues getting pulse audio to work. I have followed the wiki to a tee. However, i am getting
pactl load-module module-equalizer-sink
pactl load-module module-equalizer-sink
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
qpaeq
There was an error connecting to pulseaudio, please make sure you have the pulseaudio dbus and equalizer modules loaded, exiting.
Any help ,
Thanks

I'm trying to connect through the FTP client Filezilla. When I try to login with the wizard, it gives me a "503 Failure of Data Connection" reply; when I attempt to login myself, it gives me a "530 Login Authentication Failed." HELP!!!

My current softward is: Mac OS X Lion 10.7.5 (11G63)
When I attempt to use the Filezilla connection wizard I get the following message:
Connecting to probe.filezilla-project.org
Response: 220 FZ router and firewall tester ready
USER FileZilla
Response: 331 Give any password.
PASS 3.7.1.1
Response: 230 logged on.
Checking for correct external IP address
Retrieving external IP address from http://ip.filezilla-project.org/ip.php
Checking for correct external IP address
IP 27.0.19.56 ch-a-bj-fg
Response: 200 OK
PREP 52470
Response: 200 Using port 52470, data token 1871898076
PORT 27,0,19,56,204,246
Response: 200 PORT command successful
LIST
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent unexpected reply.
Connection closed
When I attempt to login Host/Username/Password myself I get the following message:
Status:          Resolving address of amyhoney.com
Status:          Connecting to 184.168.54.1:21...
Status:          Connection established, waiting for welcome message...
Response:          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response:          220-You are user number 12 of 500 allowed.
Response:          220-Local time is now 04:05. Server port: 21.
Response:          220-This is a private system - No anonymous login
Response:          220 You will be disconnected after 3 minutes of inactivity.
Command:          USER 5475****
Response:          331 User 5475**** OK. Password required
Command:          PASS ********************
Response:          530 Login authentication failed
Error:          Critical error
Error:          Could not connect to server
Now before anyone points out the obvious: my username and password are correct. I've already gone through changing them so I know they are.
Additionally, I've pretty much tried EVERYTHING I've read online, from messing with "terminal" (and subsequently the FTP and STFP options) to changing the sharing options and turning on file sharing/remote management as well as just turning off my Firewall completely.
Now I've used Filezilla before when I first published my site and everything worked fine. My site is published through Wordpress so most of my editing was done through simply logging into my "wp-login." I recently changed the theme and in order to change the header image in that theme I have to do it through my "wp-content" folder, which means I need to use Filezilla. I feel like a complete moron right now considering I've had my site for about a year and can't even doing something this simple.
I've read that the newer version of Lion/Mountain Lion don't support automatice FTP anymore, which (as I mentioned prior) I attempted to fix through Terminal. However, nothing I do seem to do works.
Can someone walk me through fixing this? And I do mean 'walk me through'. I'm not a tech-savvy nerd who knows all the lingo, I just know the basics so sorry if my ignorance offends you.
HELP!!

First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

Connection refused: proxy: HTTP: attempt to connect to failed [error] ap_proxy_connect_backend disabling worker

Hi all,
I'm investigating cause of a wedged wiki this morning. The MacMini (10.7.5) was working well for the last year but we're not sure when it gave up the ghost.
I've already applied the fixes detailed at Mac OS X v10.5, Mac OS X Server v10.5: Web, Mail, Wiki, Personal Web Sharing, Parental Controls services may not start after restoring a Time Machine backup but it has't helped.
The error we see when we visit the top level of the server is:
Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Apache/2.2.22 (Unix) PHP/5.3.15 with Suhosin-Patch mod_ssl/2.2.22 OpenSSL/0.9.8r DAV/2 Server at sacmini.local Port 80
The message in the httpd error logs is:
Connection refused: proxy: HTTP: attempt to connect to failed [error] ap_proxy_connect_backend disabling worker
Let me know if you have any ideas. Thank you.
--Athonia

Thanks for the reply.
So, there were some Ruby related log file entries. Do these have any meaning to you? I'm checking to see what collabcored2 does exactly.
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `require'
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /usr/share/collabd/coreclient/config/environment.rb:11
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `gem_original_require'
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `require'
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /usr/share/collabd/coreclient/config.ru:13
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /Library/Ruby/Gems/1.8/gems/rack-1.2.1/lib/rack/builder.rb:46:in `instance_eval'
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /Library/Ruby/Gems/1.8/gems/rack-1.2.1/lib/rack/builder.rb:46:in `initialize'
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /usr/share/collabd/coreclient/config.ru:1:in `new'
May 7 14:22:33 sacmini com.apple.collabcored2[22106]:
from /usr/share/collabd/coreclient/config.ru:1
May 7 14:22:33 sacmini com.apple.launchd[1] (com.apple.collabcored2[22106]): Exited with code: 1
May 7 14:22:33 sacmini com.apple.launchd[1] (com.apple.collabcored2): Throttling respawn: Will start in 9 seconds

Login fails and IP address blocked when attempting to connect to PC upgraded from Win8.1 to Win10

Hi trying to connect to a PC recently upgraded to Win10-64. Login attempts return a "Login failed" message with Reconnect/Cancel options. After 3 (or so) attemtps returns message that too many login attemps and your IP address has been blocked. All my Win7-64 PCs connect ok. Win10 trouble?

I found out...Here's the thing: I had user credentials stored when updating to Win10. I removed this setting and logged in with Client with username and pwd, connection ok. I then went back and selected store credentials, and this time everything went well. So apparently it is a problem connecting with stored credentials after a Win10 upgrade. Or maybe it's just me.

MDM Profilemanager Error "attempt to connect to 127.0.0.1:3328 (127.0.0.1) failed"

I'm running Profilemanager on Yosemite Server. Main Problem is, that i cannot apply integrate further devces thru Profilemanager or https://URL to MDM/mydevices. Error simply nothing or Internal Server Error in the Browser
HTTP Error Log shows the following permanently errors for a connect to Port 3328 and 3329 on localhost.
[Fri Oct 24 09:13:53.604064 2014] [proxy:error] [pid 3420] (61)Connection refused: AH00957: HTTP: attempt to connect to 127.0.0.1:3328 (127.0.0.1) failed
[Fri Oct 24 09:13:53.604262 2014] [proxy:error] [pid 3420] AH00959: ap_proxy_connect_backend disabling worker for (127.0.0.1) for 60s
[Fri Oct 24 09:13:53.604292 2014] [proxy_http:error] [pid 3420] [client xx.xx.xx.xx:23688] AH01114: HTTP: failed to make connection to backend: 127.0.0.1, referer: https://URL to MDM/profilemanager/
[Fri Oct 24 09:13:53.604515 2014] [proxy:error] [pid 3420] (61)Connection refused: AH00957: HTTP: attempt to connect to 127.0.0.1:3329 (127.0.0.1) failed
[Fri Oct 24 09:13:53.604535 2014] [proxy:error] [pid 3420] AH00959: ap_proxy_connect_backend disabling worker for (127.0.0.1) for 60s
Any idea how to fix that?
Martin

Thanks for he info. I looked into the /Library/Logs/ProfileManager/dmrunnerd.log File:
It logs the login-process of the ipad to https://. ../Profilemanager and alo to https://. ../mydevies. but if tap to "sign in this ipad" in the page https://.. ./mydevies there are no events logged to the file. ipad says on the display "500 internal server error"
Apache Log says:
[Mon Oct 27 10:20:52.072725 2014] [proxy:error] [pid 2135] (61)Connection refused: AH00957: HTTP: attempt to connect to 127.0.0.1:3328 (127.0.0.1) failed
[Mon Oct 27 10:20:52.072931 2014] [proxy:error] [pid 2135] AH00959: ap_proxy_connect_backend disabling worker for (127.0.0.1) for 60s
[Mon Oct 27 10:20:52.072960 2014] [proxy_http:error] [pid 2135] [client xx.xx.xx.xx:12854] AH01114: HTTP: failed to make connection to backend: 127.0.0.1, referer: https://. ../mydevices/
[Mon Oct 27 10:20:52.073156 2014] [proxy:error] [pid 2135] (61)Connection refused: AH00957: HTTP: attempt to connect to 127.0.0.1:3329 (127.0.0.1) failed
[Mon Oct 27 10:20:52.073175 2014] [proxy:error] [pid 2135] AH00959: ap_proxy_connect_backend disabling worker for (127.0.0.1) for 60s
[Mon Oct 27 10:20:52.073187 2014] [proxy_http:error] [pid 2135] [client xx.xx.xx.xx:12854] AH01114: HTTP: failed to make connection to backend: 127.0.0.1, referer: https://. ../mydevices/
Is there another Logfile i can look into?
Martin

RemoteGui.bat Login attempt failed:connection refuse to SDM

Similar Messages

Maybe you are looking for