Removal of leading zero from &*BSIS-SGTXT&
Hi ,
*I need to remove the leading zero from my sacscript fileld &BSID-SGTXT&. When its &BSID-SGTXT& I can put &(Z)BSID-SGTXT&.
*Since i am using &BSID-SGTXT& insertion of Z before is not compressiving zero.
How to compress leading zero in &BSID-SGTXT&. case.*Thanks *
Hi,
Please try
&SYMBOL(Z)& Suppress leading zeros &SYMBOL(C)& Compress blank spaces
Hope it helps.
Regards
Hiren k.Chitalia
Similar Messages
-
Removal of leading zero in &*BSID-SGTXT&.
Hi ,
I need to remove the leading zero from my sacscript fileld &BSID-SGTXT&. When its &BSID-SGTXT& I can put &(Z)BSID-SGTXT&.*
Since i am using &BSID-SGTXT& insertion of Z before is not compressiving zero.*
How to compress leading zero in &BSID-SGTXT&. case.*Thanks *Hi Kiro,
Don't post Duplicate threads,
You can continue here till your Issues gets resolved.
Removal of leading zero from &*BSIS-SGTXT&
&(Z)BSID-SGTXT&. " Instead of puttin z at initial position change as below
&BSID-SGTXT(Z)&.
how to delete leading zeros in sap script
Cheerz
Ram -
Is there a way to remove the leading zero from the 24 hour time display in iOS8?
In the previous versions of iOS, the 24 hour time format for some regions dropped the leading zero from single digit hours: 1:23 for example.
In iOS8, it appears that once 24 hour time format is toggled, the time is always displayed as four numbers: 01:23 for example.
Is there a way to revert to this older format without leading zeroes?Yes, a colleague of mine was able to figure it out. Just double-click the chapter title in the .aggr project. It places it into edit mode and allows you to remove the ".swf" extension as well as make any other changes to the name that you want. It's so easy now that we know how to do it, but it was tricky to figure out since the chapter list does not appear editable at first.
-
Remove the leading Zero from the Query output in SAP BW ?
Hi
Experts,
Vendor Number loaded as (0000010076) from R/3 to SAP BW.
How to remove Prefix of Zero for the Vendor Number(0000010076) from Quey outpt.
Regards.
ASITHi,
Please check out this thread.
Remove leading zeros
Also check if there is any conversion routine used for that particular infoobject.
If ALPHA conversion is selected for your infoobject then it will automatically take away the leading zeros at query level.
Regards,
AL
Edited by: AL1112 on Sep 16, 2011 9:15 AM -
How to remove leading zeros from a string
Hi,
I have a situation here where i need to remove the leading zeros from the incoming data.
i.e if 0009 then it should be taken as 9
if 0230 it should be taken as 230
Regards,
AshishHi ,
Write UDF to parse data .
String dataVal="0230";
int parseVal = Integer.parseInt(dataVal);
System.out.println("parseVal is "+parseVal);
result.addValue(parseVal); or return parseVal;
Nanda -
Removing (only) leading zeros in a string
Hello experts.
I need to remove the leading zeros from the material name in Crystal Report for Enterprise. I stared with function Replace and Trim and it's fine in case I specify the number of zeros to be removed.
In reality number can be 00001103 or 00455601 and there is no way to know how many leading zeros. If I choose not to specify the number of replacements, all zeros will be removed with result 113 and 445561 which is not desirable one. I should get 1103 and 455601.
What syntax would remove only leading zeros?
Thank you,
Victoriahi Victoria,
you could do something like
if isnumeric({your field}) then
totext(tonumber({yourfield}),0)
cheers,
jamie -
How to remove leading zero from Material Number
Hello Everyone,
I need to figure it out how to remove leading zero from material number. Cureently extractor is sending material number as 100663. But when comes into BI i am getting as "000000000000100663" and similariy in report it is appearing as "000000000000100663". Now my client wants me to exclude preceeding zero for a material in all the reports.
Is there any setting in query desinger to handle this issure or in the backend.
Need your inputs.
Thanks,
Lasya.Hi
you can use the function Module
CONVERSION_EXIT_ALPHA_OUTPUT in the start routine
to test this go to SE37 --- give the CONVERSION_EXIT_ALPHA_OUTPUT -
>display -
> F8
in the input give 000000456
and execute
the out put will be 456
for getting Zeros you can use
CONVERSION_EXIT_ALPHA_INPUT--- to remove leading zeros
Santosh
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:52 PM
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:54 PM -
How to remove Leading zeros from MATNR "at Database Level"
Hi,
When we create a material in MM01 , we can either create material as Internal Material No. or External Material No. (By Explicitly entering a material No.)
Our requirement is that: When we create an Internal Material , there should NOT be any Leading Zeros in MATNR.
and for External Material No. , Leading Zeros Should be there. (In Database)
1) Now , we can create the No. Range for material in such a way that it will allow only AlphaNumeric entries for Internal Material , and Only Numeric Entries for External Material No.
This should slove the Purpose.
But According to the Client's requirement , Material No can be Numeric OR Alphanumeric for Internal As well as External Material No.
2) We can Add or Remove leading zeros from MATNR at application level. i.e. we can find some BADI / Enhancement where we will Use the Conversion FM (CONVERSION_EXIT_MATN1_OUTPUT or CONVERSION_EXIT_ALPHA_OUTPUT) and remove Leading Zeros from MATNR. But these changes will NOT reflect at Database Level , Because in MATNR Domain , there is a conversion Routine , That will Add Leading Zeros in MATNR While saving in the Database.
3) While Displaying the Material In SE11 , we can also set the "Display Format" as With leading Zeros OR Without Leading Zeros.
But we dont want to Just "Display" material with OR Without Leading Zeros. we want to actually create materials in that way.
What can we do , so that at Database Level our changes are Reflected.
Thanks and Regards,
Anand Gore
Edited by: anandgore on May 18, 2011 3:47 PMThat will Add Leading Zeros in MATNR While saving in the Database.
That is because you have it configured that way. You can configure the storage as you desire. The default is the behavior you are describing. You, or your functional analyst, need to review the documentation on the MM config settings for material master number storage.
Never use CONVERSION_EXIT_ALPHA_OUTPUT for material conversion. Also keep in mind that the MATN1 functions have their own BADI for extended formatting... -
How to remove leading zeros from variable
hi,
how to remove leading zeros from variable like it_vbap-matnr.
value in it_vbap-matnr is 000000000000000358
i want to remove leading zeros so that it become 358
regards
deepakYou can use Function Module <b>'CONVERSION_EXIT_MATN1_OUTPUT'</b>
This Function Module will eliminate leading Zeros.
For each MATNR Value read form DB Table,u can eliminate Leading zeros and then modify ur Internal table.
I think u will not get leading Zeros into utr Internal table when u read from VBAP.
Bcoz MATNR in VBAP itself have Conversion routine.
If u r getting leading zeros,U can use following Logic.
tables:
vbap.
data:
t_vbap like standard table of vbap.
select matnr
from vbap
into corresponding fields of table t_vbap.
loop at t_vbap into vbap.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_OUTPUT'
EXPORTING
INPUT = vbap-matnr
IMPORTING
OUTPUT = vbap-matnr
modify t_vbap from vbap transporting matnr.
endloop.
Hope this will work..... -
Removing leading zeros from a string value
Hi All,
i have a Requirement like , i need remove leading zeros from a string value,
like , 00Raj00Shekar==>Raj00shekar,
how can i do this ?
if it is only with the custom functions ,where can add the fuction in Jdeveloper and SOA Middle ware?
Thanks in Advance,
RajHi Raj,
you can use below function to get the desired output in xsl.
<xsl:value-of select='translate(oraext:left-trim(translate(<inpString>,"0"," "))," ","0")'/>
HTH,
Regards,
Vikas Manchanda -
Removing Leading zeros from query output.
Hello Experts,
Is it possible to remove leading zeros from the query output for a particular column?
I have a characteristics 'Reference Document' which has values like '000001386'. The users just need '1386' to be displayed and have asked us to remove the leading zeros.
Is there something that can be done for this at a query level? I can't modify the underlying InfoProvider because this requirement is just for one set of users, the other users need the document nmber in the original format.
Thanks
ArvindHi,
you can use ALPHA conversion option in the definition of that particular characteristic.
Try this code in a routine.,in query designer;
data a(9) value '000001386'.
SHIFT a LEFT DELETING LEADING '0'.
write:/ a.
Output will be : 1386
Or use this method also
data a(9) value '000001386'.
Call function 'CONVERSION_EXIT_ALPHA_OUTPUT'
Exporting
input = a
Importing
output = a.
write a.
output:
1386
Regards
CSM Reddy -
Conversion routine to remove leading zeros from nonnumeric values.
Hi,
Can anybody tell me any conversion routine while can remove leading zeros from a character value.
Eg :
input : asdfe
output : 0000asdfe and vice versa
I tried with Alpha conversion routine but that is useful only with numeric values.
Please help.
Regards,
Deepti Jain.Hi,
See the following program, and the same logic you can apply in Transfer Rules/Transformations. Take ABAPer help.
REPORT ZALPHA_INPUT.
DATA: ZI(18) TYPE C,
ZO(12) TYPE C.
DATA: ZS(12) TYPE C,
ZR(18) TYPE C.
ZI = '000000099999889925'.
ZS = '099999889925'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = ZI
IMPORTING
OUTPUT = ZO.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = ZS
IMPORTING
OUTPUT = ZR .
Write:/ ZI.
Write:/ ZO.
Write:/ ZS.
Write:/ ZR.
Thanks
Reddy -
Remove leading Zeros from the mapped context node(Table)
HI,
I have he following requirement:
In the Leave approval application , in the Approver worklist we have the coloumn to display the resuqester's Perner.
The perner starts with leading zeros. We have to remove these leading zeros.
I have refer the following threads:
Removing leading zeros in a column
How to remove leading zeroes of string
and wiki document:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/java/remove%252bleading%252band%252btrailing%252bzeros%252bfrom%252ba%252bstring
but I am not able to create the calculated attribute in the Mapped Node( NWDS is not allowing indicating it is not allowed for mapped nodes.)
Any pointer how I can remove leading Zeros from existing column?
If I create the calculated attribute outside the mapped node then it is taking only the first value of the mapped node.
Please note we do not want to modify the RFC.
_vishalHi,
Thanks for inputs,
Now I created a test application where the original structure is as follows in the View Controller:
1) Context -> Z_Portal_Test_Input (mapped Node/folder) -> IT_Tab_Input(mapped Node/folder) -> Eid(Mapped attribute)
note: this attribute Eid has the values (01, 02,03,04,05)
2)Context -> Z_Portal_Test_Input (mapped Node/folder) -> Output(mapped Node/folder) ->IT_Tab_Input(mapped Node/folder) -> Eid(Mapped attribute)
Now as per your suggestion I created another node like this
Context -> Z_Portal_Test_Input (mapped Node/folder) ->testnode(value node) ->testValue(value attribute)
testnode cardinality is 1..1 and singlton = false
In the Layout
The tablecell editor of one coloumn is mapped to text Z_Portal_Test_Input.testnode.testvalue
It is expected that this will show the values like(1,2,3,4,5) but it is showing value(1,1,1,1,1)
The code of get method is:
public java.lang.String getTestnodeTestvalue(IPrivateTestpernerView.ITestnodeElement element)
//@@begin getTestnodeTestvalue(IPrivateTestpernerView.ITestnodeElement)
String msg =wdContext.nodeZ_Portal_Test_Input().nodeOutput().nodeIt_Itab().currentIt_ItabElement().getEid();
return removeLeadingZeroes(msg);
//@@end
the functon removeLeadingZeroes(msg) is implemented as per the wiki link.
What wrong I am doing/ missing....
_vishal -
Remove Leading zeros from column
How can I remove leading zeros from a column?
The data looks like *00-04-071*
The output should display 4071user10876532 wrote:
How can I remove leading zeros from a column?
The data looks like *00-04-071*
The output should display 4071try
select to_number(replace('00-04-071','-','')) from dual -
How to remove leading zeros from the screen?
Hello friends,
I am working on dialog programming.
I have a field with is NUMC 13. so when value is populated, It removes the leading zeros.
How can I display the my value with leading zeros on the screen painter?Call SE51, layout, double-click on field, attributes, tab Program, check Leading zeros.
Regards,
Raymond
Maybe you are looking for
-
How do I get this beta IOS 7.0.2 JUNK TO WORK with my iPod touch 5?? I was prefectly happy with my iPod until I got the notice to upgrade itunes to 11.1 and would you like to upgrade your iPod from IOS 6 to IOS 7. And like an idiot I took the little
-
I'm am trying to burn a dual layer PAL SD dvd. An error box comes up to say that the break point cannot be set, use manual selection but when I switch to manual the dialogue box does not appear. Any thoughts. 90min main title (set as main) 3 other ti
-
Loising wifi on my iPhone 4. how do i get it back
i really need help in explaing to me wifi i keep losing connection to the wireless routier in my home and that is how i save on using my data on my data plan...so what do i need to do in order to get it back and keep it connected...thanks for anyone
-
Getting new sizes immediately after calilng setVisible
How can I get the new sizes after hiding/showing a panel? I have a left and right panels, and a thin vertical bar in between that will alternatively collapse/expand the left panel whenever a user click on it. There's a PDF document in the right panel
-
How can I remove flash spots from silver colored objects?
Hello guys, I have attached some pictures, you can notice the flash spots due to reflection on silver color. What's the best way to remove these spots and improve the photo quality. (I understand the best way is to shoot the photos in a specific envi