Remove Bloat without root
Remove Bloat without root
The S4 allows you to freeze a lot of the bloat except
Allshare Samsung hub media Samsung updater watchon Verizon voicemail
I don't use any of the above and with the fact that Verizon is pushing data limits any app that might eat up that data we should be allowed to freeze
Rooting is not an option not because it doesn't work it makes your device very insecure which is not a good alternative
With any up coming patch provide us a way to freeze apps we will not use .
Go into setting apps and you can disable the apps.
FYI some of those apps you listed isn't from Verizon. You'll find them on ALL Samsung devices. WatchOn is also tied to your IR blaster. Some of them are tied to touchwiz(allshare for example).
Similar Messages
-
Need to run fmsedge process without root access
1937396
On Linux, the fmsedge process needed to run without root access.I see that in the release notes
new in this release:
1937396
On Linux, the fmsedge process needed to run without root access.
However I have not found any documentaion on how to do this?
I would love to run the fmsedge process run as non-root so tht root does not own the 1935 listening port.
fmsedge 26837 root 19u IPv4 4007676 TCP localhost:19350 (LISTEN)
fmsedge 26837 root 24u IPv4 4007679 TCP *:1935 (LISTEN)
fmsedge 26837 root 35u IPv4 4007717 TCP localhost:19350->localhost:59625 (ESTABLISHED)
fmsedge 26837 root 57u IPv4 26532589 TCP localhost:19350->localhost:58913 (ESTABLISHED)
This appear to not be the default setup.
Thanks in advance if anyone has tackled this! -
I have some music content in my itunes library that I do not want to sync with my ipod touch. The content has previously been synced and I want to remove it without deleting it from my itunes library. Is this possible?
Hi Pez,
iTunes in the Cloud is not iCloud. Any songs that you have purchased but have not downloaded (or have deleted), go to iTunes in the cloud. The setting I mentioned will show all of your purchases in the various views in the Music app, whether they are on your device or not. If you turn that setting off, you will only see items that are actually on your device.
Glad to hear the second sync worked! But if they all start appearing again, make sure that setting is turned off
Cheers,
GB -
Error while opening systemproperties it say reinstall UCM without root uses
UCM 11g gives error while opening Systemproperties applet, it says UCM is installed by root user reinstall it without root user. We have installed the UCM from a non root user however we are getting this error and non of the applet is opening which are in ../bin/ folder.
Is there a way this error can be fixed.
Thanks,
Rajivdo you have any directories owned by root? I've seen some nfs issues change ownership of mounted directories when they're remounted.
is anything in the /bin/ directory owned by root?
I think you should be safe to chown back to your install user.
-ryan -
HT3053 I removed battery without turning off computer, now it will not boot up or eject cd
I removed battery without turning off my mac book pro. Now it will not boot up or remove cd. I tried restarting with eject, spacebar, command e, option, trackpad, and f12 depressed, individually each time to no avail. I installed a 2 gb. ram kit and loaded OSX Snow Leopard after removing battery. I tried reinstalling the old ram with no luck..................Any help or suggestions would be welcome...........Thank You!
And you eject the CD by holding down the mouse/trackpad button before powering up; that is, before the startup chime.
BTW, if no startup chime or a different melody, RAM ist kaput. -
How to remove namespace from root-element
Hi Gurus,
I want one xml output from xslt transformation with no namespace. I managed to remove namespace from child elements by leveraging elementFormDefault ='unqualified' property of xsd. But not able remove namespace from root-element.
Output that I want is :
<?xml version = '1.0' encoding = 'UTF-8'?>
<inp1:Email_Mod_Root>
<Email_Mod_Root_Element>
<Email_Record1>
<PERSON_NUMBER>123456</PERSON_NUMBER>
<COUNTRY/>
<EMAIL_TYPE>WORK</EMAIL_TYPE>
<EMAIL>EMAIL3</EMAIL>
<PRIMARY_FLAG>Y</PRIMARY_FLAG>
</Email_Record1>
</Email_Mod_Root_Element>
</Email_Mod_Root>
Output that I am getting:
<?xml version = '1.0' encoding = 'UTF-8'?>
<inp1:Email_Mod_Root xmlns:inp1="http://www.example.org">
<Email_Mod_Root_Element>
<Email_Record1>
<PERSON_NUMBER>123456</PERSON_NUMBER>
<COUNTRY/>
<EMAIL_TYPE>WORK</EMAIL_TYPE>
<EMAIL>EMAIL3</EMAIL>
<PRIMARY_FLAG>Y</PRIMARY_FLAG>
</Email_Record1>
</Email_Mod_Root_Element>
</Email_Mod_Root>
Anyone, pls suggest.
Thanks in advance,
SG_SOAFirst of all :
<inp1:Email_Mod_Root>
<Email_Mod_Root_Element>
<Email_Record1>
<PERSON_NUMBER>123456</PERSON_NUMBER>
<COUNTRY/>
<EMAIL_TYPE>WORK</EMAIL_TYPE>
<EMAIL>EMAIL3</EMAIL>
<PRIMARY_FLAG>Y</PRIMARY_FLAG>
</Email_Record1>
</Email_Mod_Root_Element>
</Email_Mod_Root>
isn't valid xml (you start with inp1: prefix and you end the tag with no prefix, but let's assume you don't want any prefix/namespace at all)
if i use :
[code]
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:inp1="http://www.example.org" exclude-result-prefixes="inp1">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:template match="*">
<xsl:element name="{local-name(.)}">
<xsl:apply-templates select="@* | node()"/>
</xsl:element>
</xsl:template>
<xsl:template match="@*">
<xsl:attribute name="{local-name(.)}">
<xsl:value-of select="."/>
</xsl:attribute>
</xsl:template>
</xsl:stylesheet>
[/code]
i get this
[code]
<Email_Root_Element>
<Email_Record>
<EMPLID>EMPLID46</EMPLID>
<EMAIL>EMAIL48</EMAIL>
<E_ADDR_TYPE>E_ADDR_TYPE49</E_ADDR_TYPE>
<COUNTRY>US</COUNTRY>
</Email_Record>
<Email_Record>
<EMPLID>EMPLID47</EMPLID>
<EMAIL>EMAIL49</EMAIL>
<E_ADDR_TYPE>E_ADDR_TYPE50</E_ADDR_TYPE>
<COUNTRY>US</COUNTRY>
</Email_Record>
<Email_Record>
<EMPLID>EMPLID48</EMPLID>
<EMAIL>EMAIL49</EMAIL>
<E_ADDR_TYPE>E_ADDR_TYPE51</E_ADDR_TYPE>
<COUNTRY>US</COUNTRY>
</Email_Record>
</Email_Root_Element>
[/code] -
How to create JTree without root node
Hello;
I like to create a JTree without root node?
Any help?
Thanks!
--tonyjavadocs JTree,
setRootVisible
public void setRootVisible(boolean rootVisible)
Determines whether or not the root node from the TreeModel is visible.
Parameters:
rootVisible - true if the root node of the tree is to be displayedSee Also:
rootVisible -
Reading the ethernet address without root permissions
Hello,
Is there a way to get the ethernet address of a network interface without root permissions (in a user program)?
I need the mac address in order to generate DCE's uuids. The mac address is used as a unique machine identifier.
SergeHI
You may use this program copied from a technote 2856-09 to get MAC address in C. Works fine only if arp cache is present though . It
does not talk to the driver directly . May be usefull to you. Compile
with "-lsocket -lnsl" flags.
<pre>
#include <stdio.h>
#include <sys/types.h>
#include <sys/sockio.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <netdb.h>
#include <errno.h>
main(argc, argv)
int argc;
char *argv[];
int sockfd, i;
struct arpreq arpreq;
struct sockaddr_in *sin;
struct hostent *hp;
char host[256];
if(argc != 2)
printf("Usage : %s hostname\n", argv[0]), exit(1);
strcpy(host, argv[1]);
bzero(&arpreq, sizeof(struct arpreq));
arpreq.arp_pa.sa_family = AF_INET;
sin = (struct sockaddr_in *)&arpreq.arp_pa;
sin->sin_family = AF_INET;
sin->sin_addr.s_addr = inet_addr(host);
if (sin->sin_addr.s_addr == -1) {
hp = gethostbyname(host);
if (hp == NULL) {
fprintf(stderr, "%s: %s: unknown host\n",
argv[0], host);
exit(1);
bcopy((char *)hp->h_addr, (char *)&sin->sin_addr,
sizeof
(sin->sin_addr));
if ( (sockfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0 )
perror("can't open datagram socket");
if (ioctl(sockfd, SIOCGARP, (caddr_t)&arpreq) < 0)
if (errno == ENXIO)
printf("%s (%s) -- no entry\n",
host, inet_ntoa(sin->sin_addr));
else
perror("SIOCGARP IOCTL failed");
exit(1);
printf("Hostname : %s", host);
for (i=0; i<6; i++)
printf("%c%x", i == 0 ? '\t': ':', (unsigned
char)arpreq.arp_ha.sa_data);
printf("\n");
close(sockfd);
exit(0);
</pre> -
Removing the dummy root element
Looks like I created a topic that cannot
be replied to! The topic maintainers will
have to delete it.
After looking at the XMLSample code I realized my mistake... oops!
A quick edit turned off the <root>
containment. Not sure why it's there in
the sample in the first place.
For anyone else who tries this, here's the
change to remove the dummy root element:
The new code in XMLSample.java is:
out.appendChild(result);
instead of:
// create a dummy document element for the
// output document
Element root = out.createElement("root");
out.appendChild(root);
// append the transformed tree to the dummy
// document element
root.appendChild(result);
nullHi,
Please try deleting the xml files corresponding to the dimensions from the backend and try opening the dimension member sheet.
For deleting the XML file follow the workaround in my reply of the below thread,
Re: Master data issue in CV
Hope this helps,
Regards,
G.Vijaya Kumar -
Remove duplicates without using Sort OR Script compnent OR Staging ?
Team , Can some advise on how do we go about removing duplicates without using either of above option quoted in the subject lines ? My source is a huge flat file .
Thanks in advance !
Rajkumar YeluguI think you can do like this
1. Add a Data Flow Task with flat file source
2. Add a multicast to flat file source
3. Join an output from Multicast to Aggregate transform and group by your required field and take min or max over a unique valued column(s) (id or date or primary key)
4. Add a Merge join transform and add the multicast output and Aggregate Transform outputs as sources. join on the group by fields from aggregate and include min/max column also in output
5. Add a conditional split and define an output as unique valued column(s) >(<) Min/Max value from aggregate
6. Join the defined output to your destination to get only distinct records from the duplicate sets
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
How to use SAX Parseto paser xml without root element
Hello,
I have big a xml file(500M) with without root element. How can I use SAXParse to parse it.A well-formed XML file has a single root element. Your parser can't deal with any other kind. So find the person who produced that file and explain politely that it's no good. (Hitting them with a big stick would be optional.)
You could write a non-XML program that reads it in and creates a new version, wrapped in a single root element, if your supplier can't fix their problem. -
How to install from existing linux without root privilege?
We have a ubuntu server for develop in our company and I have a account. I am more familiar with archlinux. However, I can't just tell the system administrator to replace ubuntu with arch, since that would break everything. And I do not have root privilege. So I am wondering would it possible to install archlinux in the home directory, and use it like a virtual machine?
DSpider wrote:
Pacman needs root privileges (sudo) to work.
So if sudo works for you, then you have root privileges.
Maybe fakeroot or fakechroot?
Trilby wrote:
Ubuntu + pacman != arch.
If you are able/allowed to reboot the machine, you certainly can install arch on a flash drive and have your portable system that you would run on their hardware.
I am asking something different. I want to run arch on another linux.
ewaller wrote:
So, as a user on the system, you should be able to install anything you want to your home directory.
What, specifically, would you like to install to your home directory that you can run with plain user permissions without causing impact to other users. I am confused as to what you think you want to do..
Something like, install software (including pacman) to home directory via pacman. Start a server by rc.d (I think in this case, sys-V is better than systemd).
For example, I could run this command in ubuntu without root permission, and that ubuntu server didn't install mysql.
$ pacman -S mysql
$ rc.d start mysqld
$ #Or "systemstl start mysqld.service" -
How do I remove iTunes without all my purchased items lost?
How do I remove iTunes without all my purchased items lost?
iTunes stores you music in:
Music\iTunes\iTunes Media...
This should not be affected by uninstalling iTunes.
It is always prudent to backup your valuable music. -
Install JMQ into other directory than /opt/sun/ without root user possible?
hi *,
i just wanted to know if there is the possibility to install JMQ 4.1 in a custom directory?
AND is there the possibility to install the JMQ server without root?
we do have several embedded JMQ servers inside sun appserver that do not need root or a specific directory why should the standalone version need this?
regards chrisThere is no non-root install available on Solaris or Linux with SJSMQ. (we are looking into it, but we have been waiting for a new packaging system to come out as a side-effect of Solaris 11 which would handle installation in non-root locations, management of packages and patching).
We are also investigating making the packages re-locatable in the next release (so you would still have to be root but you could cleanly install into export or some other location). However this requires generating a whole new bundle of packages and later patches (the current layout is dictated by the fact that we have older releases which ship included in the solaris operating system)
At the moment ...
On Solaris, you can install SJSMQ as root into another directory (using the -R flag to pkgadd) however the installed directory structure looks a bit nasty (since it would look have paths something like /export/mq/usr/share/lib/imq/props/config.props)
On openMQ, we do have a tar based bundle which can be installed on any system (not as root). The downside is that it is not supported and can not be patched. -
Rutilt without root password?
Is there any way to use rutilt or wifi-radar without sudo or a root password, as is done with e.g. wicd and networkmanager? I'm getting sick of wicd's bugs, but the root access requirement is annoying - can I make these applications respect the network group, or allow some other group to use them without root priveleges? Or would that be too insecure?
I've been using wifi-radar for ages and really like it. To avoid having to run as root or enter password I've added to /etc/sudoers file:
username ALL=(ALL) NOPASSWD: /usr/bin/wifi-radar
I don't know if this would be what you want as it's kinda using sudo without having to type in "sudo wifi-radar". wifi-radar is added to my DAEMONS list in rc.conf and works great. I also have a wifi-radar icon in my E17 ibar so I can check out other access points if I want. Come to think of it, is what I'm doing insecure? Never really thought about it.
Maybe you are looking for
-
Hello, i upgraded to the Creative Suite 5.5 today and detected a strange behaviour. I work on a document which has been generated on another system with an older version of the Creative Suite. Everything is fine until i open and save one of the image
-
How to create report tabs in webi report
How to create report tabs in WebIntelligence report in BO XIR2 through .net sdku2019s?
-
Localhost site is not opening on mobile
I have downloaded both Adobe Edge Insepct and chrome extension but do not understand how to test my websites locally.why it is not working locally. I've started up WAMP, start all its services, put it online connected my moblie. My site is in localho
-
Problem import .mov files
Just updated to 10.0.1 for some reason it imports mp4 files fine, but .mov files will not import. Gets stuck and freezes/crashes at 'Validating files for import' stage. These .mov files imported fine into 10.0.0 and they play fine in Quicktime help!
-
I have used Pages for about 3 years and found it to be a good editor for documents. I have recently upgraded to Mavericks which brings a new version of Pages. I have the latest level of pages and OS installed. When I opened a pages document, it a