Remove default keyListeners?

How do U remove default KeyListeners from keybord?

Use getKeyListeners() to get the key listeners registered with a Component, and removeKeyListener(KeyListener) to remove a key listener from a Component.

Similar Messages

How can I remove default alarm for events in iCal on devices ios?

Whenever I add an event to my iCal calendar in Mounain Lion it will automatically add one default alert only on my iphone and ipad. These default alarms are not displayed on my macbook or icloud.com
Default alarms are disabled in macbook, icloud.com, and my ios devices.
How can I remove default alarm for events in iCal on devices ios?
Thanks and sorry for my english.
MacBook Pro, Mac OS X 10.8

OK, so I have had this issue for the past several months. I think it all started when I upgraded to ML from SL and migrated my calendars and contacts to iCloud. That was a couple months ago. But now I am running 10.8.2, and about two weeks ago I upgraded my iOS devices to 6.0.1.
I don't seem to be having any issues with events that I create now, but all those old events that were migrated to iCloud a couple months ago, many of those sound alerts on the iOS devices even though there was no alert defined when the event was originally created. I have always had alerts off by default both in iCal and on the iOS devices.
So here's the question: is there a way to go through and disable all these spurious event alerts? I've been disabling them as the event reminders come up, but it's irritating. It would be nice if there was a way to turn them off all in one shot somehow.

Eliminating excessive dhcpcd add/remove default route messages

I've been on an IPv6 network for the past several months. I use no network manager (aside from netctl and wifi-menu) and I'm generally wired in. I manually start dhcpcd on my eth0 when I start my computer.
The issue I've been having and have been unable to resolve is the fact that the following two messages have been repeating in my log every 2-10 seconds for the past several months and I now have several thousand of them. It's just getting annoying at this point because it interferes with actually reading relevant log messages via journalctl:
Mar 22 10:45:56 kcuzner-desktop dhcpcd[1109]: eth0: adding default route via fe80::fa8f:caff:fe2d:b464
Mar 22 10:45:56 kcuzner-desktop dhcpcd[1109]: eth0: removing default route via fe80::fa8f:caff:fe2d:b464
No matter what I search, I can't seem to find a way to get rid of these. I keep a terminal open with journalctl -f running almost always and it's just filled with these, quickly pushing away relevant messages such as "codeblocks dumped core". Does anyone have any tips for preventing these sorts of log entries?
Last edited by Los Frijoles (2015-03-22 18:27:41)

I don't think there is a way for journalctl to exclude logging from only dhcpcd. Of course, you can filter the real time logging to the group of units that you do want to watch but I think you want to watch everything else, right?
How about trying systemd-networkd rather than dhcpcd? Or, if you are only concerned about certain priority level messages, set the priority level. If everything you want to monitor is priority 4 and below for example, and if this message priority is 6, then you're all set.
Last edited by nullified (2015-03-22 19:43:59)

How to remove default value from table definition?

Hi,
running 9.2
Following problem :
I need to remove default value from table.
Example
CREATE TABLE MY_TABLE(
NAME VARCHAR2(50) DEFAULT 'NAME',
AGE NUMBER DEFAULT 0
Now even when I use MODIFY like
ALTER TABLE MY_TABLE MODIFY (NAME VARCHAR2(10) );
The default is still there:
SELECT DATA_DEFAULT FROM USER_TAB_COLUMNS WHERE TABLE_NAME = 'MY_TABLE';
Is there any way?
Thanks

Thanks,
found the answer. It is not possible!!!!
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_3001.htm
Note:
If a column has a default value, then you can use the DEFAULT clause to change the default to NULL, but you cannot remove the default value completely. That is, if a column has ever had a default value assigned to it, then the DATA_DEFAULT column of the USER_TAB_COLUMNS data dictionary view will always display either a default value or NULL

Remove Default Company Codes

Hi Guyz,
Please help me to findout if there is any way to remove default SAP company codes in system.
Thanks in advance,
Shoban

Please try transaction code EC01
Regards,
Rich Heilman

Remove default local weather

Hey there,
How can I remove default local weather(added automatically) from side (notification center) on my mac os x Yosemite?
I can't read in this language.
Or would be great if there be a possibility to change language to english. My system language is english.

go to system preferences -> security & privacy
choose privacy tab, select location services, and uncheck the weather
I think it will be OK.

Need to remove default dock menu item and add new.

Hi ,
I am working on Carbon application on Xcode . I need to remove default menu item attached to my application dock menu like ( Remove from Dock , Open at Login , Show in Finder ).
I also need to attach new items to my application dock menu and want to handle its event.
Thanks in advance,
Sunil Adhyaru.

Well, this is a programming question more than a question on how to use the Leopard environment (you might want to post to one to the programming forums).
However, basically, you can't remove the Dock menu items that the Dock itself adds (add/remove from dock, etc.). You can add your own menu items, however. Use the interface builder to create a nib that has a menu in it -- call it something catchy like MyMenu.nib.
Then in the application property list file (Info.plist) add property called "AppleDockMenu" and set the value to a string that's the name of your nib file (without the .nib extension).
Subsequently, you treat that menu just as you would the menus in your menu bar. That's all there is to it.

REMOVE DEFAULT

I am using oracle 11g.
i created table
SQL> create table test2(name varchar(20) not null);
Table created.
SQL> alter table test2 modify (name default 'vir');
Table altered.
now i want to remove this default value how to do it??
thks

try this
alter table test2 modify name default nulland read
how to remove default value

Project Server 2010: PWA Removing Default Project Site Security Groups When Creating a New Project

I looked for this specific issue with Project Server 2010/PWA/SharePoint and could not find an exact answer... hopefully someone can help.
We are currently using Project Server 2010 and have a number of project site templates that are used dependent upon the enterprise project type selected. Each of these project site templates have unique permissions which should create the default security
groups on the project site upon publishing/syncing:
<Project Name> Members
<Project Name> Owners
<Project Name> Visitors
<Project Name> Project Managers (Project Web App Synchronized)
<Project Name> Team Members (Project Web App Synchronized)
Web Administrators (Project Web App Synchronized)
Whether a user creates a project through PWA or Project Pro 2010 and imports the project into PWA, we get a weird result in the Site Permissions of the newly created project site. PWA will remove all default security groups from the project site template
and add a whole list of users in the Site Permissions list without groups.
Once the project is published and the project site is created, we can then go back and add those default security groups back in the project Site Permissions and even add a couple of custom groups without them being removed on all subsequent project syncs
or publishing.
How do we get PWA to not overwrite the project site templates' security groups and place each user in the proper default security groups? At the same time, how is PWA adding a number of users into the Project Site Permissions?
Thanks in advance.

Paul,
Thanks for that information. Right now we are using the Test environment to turn the Auto-sync feature back on. I suspect that the reason this is happening is due to PWA groups/categories/security templates. There may be more than one PWA group that is "overwriting"
the default project site groups upon initial creation of the project. We will look further into the security settings to tighten up the policies.

How do I change or remove default apps for a given file extension (in Terminal?) without munging date modified on all my old files?

When a program is installed, it seems to be able to do it (sometimes inappropriately if it hijacks file associations without asking) so why can't I? This is for 10.4.
Specifically:
1. Since installing an HP wireless printer, HP not only tries to install a bunch of sales-ware on your machine that you have to carefully opt out of (annoying, but not a problem if forewarned), it changes the default file association for a number of basic file types, listing all sort of existing files as HP printer files. Using Get Info to change the default file type association globally causes it to mark ALL the files of that type as newly updated, munging the file metdata (which HP did NOT do). Most of the stuff on our computer is sorted by last modified, so if there is a way to fix this in Terminal (to simply fix or remove the HP default tag) without changing the date the file was modified, it would help. Note that uninstalling the program that created the default would do this, but I obviously can't do that (and reinstalling HP would have the same effect). So there has to be another way, right?
2. Since updating iTunes to v.9 a while back, every mp3 is marked as an iTunes file even though iTunes has NO multiple library capability without a wonky reboot using the option key, meaning that if I click on an mp3 downloaded since last update of iTunes, it opens automatically in iTunes and gets added to the SOLE itunes library without asking. (There is no way to toggle between multiple libraries or archive media in separate folders; iPhoto has a similar problem. (Has this been fixed in the latest version of iTunes?) In comparison, Quicktime starts up immediately and does not attempt to create a playlist just because you opened a file and listened to it.
(The iTunes playlists are simply subfolders of the single main library -- and you can't create a new library without doing a wonky procedure by clicking option during startup and telling iTunes to forget where its library is located (includin everything in it) and look up an entirely separate one by hand. So any mp3 file downloaded recently is uploaded to iTunes if you click on it. This wouldn't be problem if it didn't automatically add it to the sole iTunes library just because you clicked on it.)
Besides, all my old mp3s are Quicktime files and they are all archived by date modified. To its credit, ITunes, unlike HP, does NOT hijack older files already on disk and remark them as iTunes files. It only marks newly downloaded files as such. But if I try and change file association for FUTURE mp3 files using Get Info > "use this program for all files of this type", it munges the file metadata (date modified) for all existing files!
Note that in HP case, it apparently does it at the file exchange preference level (or whatever it's called) since the OS then recognizes every file of those types as an HP file. In the iTunes case, it only does it if you download a new media file or open an existing file in iTunes, but again without changing the date it was last edited.
Since these programs are able to change the default file association without changing the date the file was last edited, it should be reversible in Terminal, correct? Why does it change "date modified" when you try and correct metadata using Get Info (or sometimes just by clicking an enclosing folder?) Date modified should be a record of when a file itself was edited, not when it was renamed, or other metadata. Otherwise stuff can't be sorted correctly.

The unix commands you need are:
GetFileInfo
SetFileInfo
and maybe find
for cryptic details use the man command
Macintosh-HD -> Applications -> Utilities -> Terminal
man SetFileInfo
You may use the SetFileInfo command to set the file type & the program which will open the file.
# This little gem will do a get info on all files in a directory.
mac $ ls | xargs -I {} GetFileInfo "{}"
file: "/Users/mac/playdoc/oddadocodd"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 14:53:22
modified: 05/01/2011 14:53:22
file: "/Users/mac/playdoc/one.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 13:57:48
modified: 05/01/2011 13:57:48
file: "/Users/mac/playdoc/oneLineFile"
type: "TEXT"
creator: "!Rch"
attributes: avbstclinmedz
created: 05/07/2011 14:27:17
modified: 05/07/2011 14:27:17
file: "/Users/mac/playdoc/oneLineFile.txt"
type: "TEXT"
creator: "!Rch"
attributes: avbstclinmedz
created: 05/07/2011 14:27:49
modified: 05/07/2011 14:27:49
file: "/Users/mac/playdoc/three.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 13:58:03
modified: 05/01/2011 13:58:03
file: "/Users/mac/playdoc/two.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 13:57:56
modified: 05/01/2011 13:57:56
file: "/Users/mac/playdoc/weirder.doc.docx"
type: ""
creator: ""
attributes: avbstclinmedz
created: 05/01/2011 14:50:03
modified: 05/01/2011 14:50:03
# well, ! is a funnie character so we escape it.
mac $ SetFile -t TEXT -c \!Rch two.docx
mac $ GetFileInfo two.docx
file: "/Users/mac/playdoc/two.docx"
type: "TEXT"
creator: "!Rch"
attributes: avbstclinmedz
created: 05/01/2011 13:57:56
modified: 05/01/2011 13:57:56
mac $
mac $ date
Sat May 7 14:40:56 EDT 2011
mac $

Remove default stacks, display shares in sidebar, time machine in menu bar

Hey everyone,
I'm setting up a couple laptop labs for a school with Leopard and have run into a couple minor issues.
I created a standard user and configured this user as I would like future user profiles to be like. I then copied the Library and Documents folders of the user into the default user template (/System/Library/User Templates/English.lproj/). Everything worked as expected, except for the following...
1) When a user logs in (Active Directory), their dock contains the Documents and Downloads stacks along with Time Machine. I do not want them! I had removed all three from the user I used as a template, but for some reason they seem to still appear with new users. What I would like is a 100% empty dock (minus the Finder and Trash of course). The dock will be populated via Workgroup Manager.
2) Mounted network shares do not show up via the Finder's sidebar. This makes it a little confusing for users to save to folders on these shares as they have to navigate to them a bit differently than they do in Tiger. I had drug all the shares I wanted onto the side bar, but it seems this does not stick once you log out.
3) The Time Machine icon appears in the menu bar. I had gone into System Preferences under the user I used as a template and unchecked "Show Time Machine status in the menu bar" but this does not seem to apply with new users.
They're all relatively minor issues, but if anybody has any suggestions I'd love to see if I can fix them!
Here is a little background on how the machines are set up: The machines are all managed via Workgroup Manager. The Open Directory server is running 10.4.11, but I seem to be able to control the Leopard specific settings by using the Leopard version of the Server Admin tools without any problems. All our users come from Active Directory. If you need any more info, let me know!
Thanks in advance!
Message was edited by: Anthony J

yes, i see I replied way before you were finished with this. as you are dealing with a server you might be better off posting in the [OS X server|http://discussions.apple.com/category.jspa?categoryID=96] forum.
I don't understand why your modified dock doesn't stick. i actually have done exactly what you describe in the past with the user template folder and the modified dock was displayed correctly. all you really need for the dock is one file:
~/Library/Preferences/com.apple.dock.plist
when I copy this file for my current user to the template directory, all new users have the same dock as I do now. same with the sidebar. the file there is
~/Library/Preferences/com.apple.sidebarlists.plist
I don't think there is a way to keep connected servers in the sidebar once you disconnect. You could create aliases to them while connected and stick aliases in the sidebar.

How to install MySQL 5 and remove default install

Hi all,
I have some problems to make MySQL 5 works fine on Mac OS X server.
I have installed the package (http://dev.mysql.com/downloads/mysql/5.0.html) but a instance of the old mysql still running.
Can someone explain me how to remove the default install and make the new one works?
PowerBook G4 Mac OS X (10.4.3) Mac OS X Server

"pwd in directory /usr/local/mysql return /usr/local/mysql"
I didn't really address this in my previous post, but this could be a problem. This seems to indicate that there is an actual directory named mysql in /usr/local. That shouldn't be the case. If it's empty, you should remove it and replace it with a symbolic link to /usr/local/mysql-standard-5.0.16-osx10.3-powerpc (assuming that's the version you have installed).
To create this link, cd to /usr/local and enter:
ln -s /usr/local/mysql-standard-5.0.16-osx10.3-powerpc mysql
Or you may want to run the installer again. I would hope that the installer would not fail without giving you an error, and since creating this link is not necessary for the installation, it probably just ignored it, but the presence of the directory would have prevented it from creating the link, so it could have interfered with the normal operation of the installer.
Normally when you install MySQL it installs into the /usr/local directory, creating a folder with the full name of the version, e.g. "mysql-standard-5.0.16-osx10.3-powerpc" in the case of the current version. It then creates a symbolic link to that directory called "mysql" in the /usr/local directory. That's why, normally, if you cd to /usr/local/mysql and issue pwd it should give you the full path to the current MySQL installation directory.
The beauty of this system is that it leaves your current installation intact, so if you need to back out, because some of your applications are not compatible with the new version, you only need to re-point that symbolic link to point back to the old version.
It also allows you to transfer your data very easily. Even if you forget to extract the data folder from the old version before you installed the new one, your data is still there, safe and sound. (That's why I've been recommending leaving that folder alone until you sort out the problems with the installation of the new version.)

How to remove default facebook email on login scre...

I am using the latest version of Skype.
When I start Skype, the main Skype login screen show up. At the bottom right corner, there is a link to Sign in with facebook, After the link is clicked, then a facebook logon screen will showup. I did logon using facebook once and logout but my facebook id becomes the default on that field.
My question is how to remove the default email/facebook ID on that screen. I did not login in to Skype, not on facebook. I have tried uninstall Skype and delete all the file in %appdata%skype directory. I did try to blank out the field and close Skype. It doesn't work.
However none of the method works. When I go to the facebook logon screen in Skype, the default facebook ID still show up(I used that ID logon once but have already logout).
I have already removed the my Skype/facebook account association already but the facebook address still showup as default.
Any idea to clear that default?

Will this terminal command work in OS X 10.10?
sudo defaults write /Library/Preferences/com.apple.loginwindow SHOWOTHERUSERS_MANAGED FALSE

How to remove default search button in search module

I am a neophyte with code and css and normally work with Muse. But I am currently trying to customize the appearance of the search module so that it works with the website it will be serving. I have accomplished a large part of what I've been attempting, but have hit a snag in removing the default search button (CAT_Search). I've placed the image I want to use no problem, but it is contained in some weird gray beveled box with the original 'Search' text overlapping my image.
I have been making the rounds of tech support, tutorials, and every documented article on the search module and can find nothing that address this specific issue. Any help would be greatly appreciated! I am enclosing the what I've done so far below.
Thanks!
Paula
<style type="text/css">
body form {
width: 163px;
height: 48px;
form-top-right-radius: 5px;
form-bottom-right-radius: 5px;
background-image: url(http://corehog.businesscatalyst.com/images/search.png);
.search-box {
color: #999966;
font-family: lato;
font-style: normal;
font-weight: 100;
width: 86px;
height: 24px;
border: none;
max-width: 86px;
opacity: 0%;
max-height: 24px;
margin-left: 12px;
margin-top: 12px;
margin-bottom: 12px;
.cat_button {
width: 32px;
height: 24px;
border: none
background-color: none;
background-image: url(http://corehog.businesscatalyst.com/images/search-button.png);
margin-left: 12px;
margin-top: 12px;
margin-right: 20px;
margin-bottom: 12px;
</style>
<script>var __adobewebfontsappname__="dreamweaver"</script><script src="http://use.edgefonts.net/lato:n1:default.js" type="text/javascript"></script>
<form name="catsearchform87352" method="post" action="/Default.aspx?SiteSearchID=3752&PageID=/http://corehog.businesscatalyst.com/search-results.html"><div><input class="search-box" type="text" name="CAT_Search" id="CAT_Search" /><input class="cat_button" type="submit" value="Search" /></div></form>
{module_searchresults}

Hi Ramandeep Nanda,
Thanks for the reply.
I followed a slightly different approach than the one mentioned in your post.
I have not used any client side javascript attributes.I got the inputListOfValues Component from the launch listener event ( launchPopupEvent.getComponent() ) and in the launch listener i am setting richQuery.setModeChangeVisible(false);
It is hiding the button now but only for the first invocation of the search dialog, it is not working.
More specifically, for the first invocation of the search dialog, Iterator facetNames = inputListOfValues.getFacetNames(); is not returning the child components and hence the button is not being hidden.
Any idea why this might be happening?
Thanks,
Vikas

Reader 9.3.3 Removing default printer - says no printer installed

I have over 50 users with Adobe Reader 9.3.3 installed. Every morning someone calls and says Adobe Reader reported that there are no printers installed on their system. When I check their PC I find that the default printer setting has been removed and there is no default printer set. Once reset they have no problems with the printers or their other applications. This only happens when trying to print a PDF.
Why is Adobe Reader removing the default printer setting?

The driver has NOT been removed. Just the default setting.
In very PLAIN English the default printer check mark is GONE.

Remove default keyListeners?

Similar Messages

Maybe you are looking for