Remove extra space value of the field in text element

Dear All,
Can any one please help me out to remove the blank spaces in the text elements of SF.
we are printing Label in which i want print quantity of material. and i am using MSEG-MENGE for quantity of maetrial.
But the issues is when we are printing the label. We are getting spaces in the Text elements fields &MSEG-MENGE&.
i am also check menge field within mseg table. in which menge field define as QUAN data type with length 13.
<
MAT CODE:&t_MSEG-MATNR&
DESC:&MAKTX&
QTY:&t_MSEG-MENGE&
UOM:&t_MSEG-MEINS&
>
My Output in SF:
MAT CODE:11000002
DESC:Coarse Aggregate 10mm Sieve
QTY:             960
UOM:LBM
MIGO.NO.:4900000025
how to remove extra blank spaces in the text elements ( QTY:             960 )
guide me.........

Dear All,
I am using code block in SF before text element.
In The Text Element ...
<
MAT CODE:&t_MSEG-MATNR&
DESC:&MAKTX&
QTY:&t_MSEG-MENGE&
UOM:&t_MSEG-MEINS&
MIGO.NO.:&t_MSEG-MBLNR&
PO.NO.:&t_MSEG-EBELN&
LOCATION:&t_MSEG-WERK&&NAME1&
>
In programe Line ( code block )....
<
read table t_mseg index w_index.
qty = t_mseg-menge.
condense qty.
SELECT SINGLE name1 FROM t001w INTO name1 WHERE werks = t_mseg-werks.
SELECT SINGLE maktx FROM makt INTO maktx WHERE matnr = t_mseg-matnr.
>
My Output:
MAT CODE:11000002
DESC:Coarse Aggregate 10mm Sieve
QTY: 960
UOM:LBM
MIGO.NO.:4900000025
Only problem in value of Quantity field .
guide me.........

Similar Messages

How to remove extra spaces from Data Matrix Label?

Hi All,
Kindly let me know how we can remove extra spaces from Data Matrix Label.
Suppose we have this following code in SO10.
^FO1380,1879^COY,78^BY4^BXR,6,200^FH^FD[)>_1E06_1DF01001T_1D6JUN&v_huf&&v_hul&_1DV&v_supnum1&_1D16K&v_del&_1D6D&v_flddat1&095_1D2L&v_unload&_1D
P&v_article&_1D4L&v_madein&_1D_1E_04^FS.
Variable have there own value. and the desired result will be shown like the attachment.
But in my code it splits into new line when CMIR value has 3 spaces.
If CMIR value is 1S0 820 355 A . then it creats a new line.
Kindly suggest me any possible solution.
Thanks,
Partha

Hi Gaurav,
In print preview we can't see any space or new line. But when it scanned by TSB (barcode scanner) it will generate a new line when there is 3 space CMIR value.
So where should I write SHIFT CMIR LEFT DELETING LEADING space this code?
Because there is no space coming at the time of debugging or print preview.
And in SO10 the code written as
^FO1380,1879^BY4^BXR,6,200^FH^FD[)>
Here CMIR value is 1SO 820 303 A
and generated output is like this.
And desired output should be like this.

Removing extra spaces from a long document

Hello
I have seen a number of find/change and GREP formulas to do similar things. I have NO scripting or coding experience and have labored to understand GREP.
So I am a little afraid to use it as I don't know what all the modifiers refer to (I do have a printout of some neat GREP cheatsheets like Mike Witherell's that I can absorb until I obtain a good reference )
I need something I can copy and paste into either find/change or GREP dialog that will do the following in less than 12 steps (hopefully) without doing something catastrophic like removing all of my paragraph marks (which I almost did using someones GREP expression)
No spaces before any comma, period, exclamation mark, question mark, colon, semicolon
One space only after any of those
One Space before any opening parenthesis and one space after the closing parenthesis
No space after the opening parenthesis or before the closing parenthesis
Remove any double or extra spaces ( en, em etc.)
Remove any commas before parentheses
Remove any spaces after a paragraph mark
I think that's it
I did find this one recently (Maybe Jongware?)
[~m~>~f~|~S~s<~/~,~3~4%]{2
Which from my dim understanding addresses em, en, flush and hair space , nonbreaking space ,figure space,third space--not sure of the rest. Really this is way over my head.
I know this will be a piece of cake for you guys
Thanks

A: Removing extra spaces from a long document

Peter is too modest, he's doing just great.
No space BEFORE-One Space after ---period,semicolon,colon, exclamation, question mark,CLOSING Parenth,Bracket,Brace, single & Dbl. quotation marks
Find (\s)([.,;:!\)\]\}~}~]])
Replace with $2
No space AFTER-One Space Before----OPENING bracket,brace,parenthesis,Dbl & single quotes
Find ([\[\{$~{~[])(\s)
Replace with $1
These remove the space before/after but do not automatically add a space after/before.
In the first case, you could add a space right after the '$2' in the Replace With string, but it already may have a space, in which case you suddenly have two. One alternative is to optionally remove it with the Find string (add it as an optional match) and always add it with the Replace string, but remember that this string will only be found if there is a space preceding it. That way you'd only check the space after in cases where there was a bad space before.
So I propose you add another two find/changes to add the space, only when necessary.
One Space After: find
([.,;:!$\]\}~}~]])(?!\s)
replace:
$0 [followed by one single space]
One Space Before: find
(?<!\s)([\[\{$~{~[])
replace:
[one single space] $0
Color-coding with my WhatTheGrep might make it just a tad clearer what's going on in that jumble of codes:
(1 [ .,;:! $ \] \} ~} ~] ] 1) (?!! \s !)
and
(?<!<! \s <!) (1 [ \[ \{ \( ~{ ~[ ] 1)
(Orange is lookahead/lookbehind, blue is a regular escaped character, pink is an InDesign special character, green is normal grouping parentheses, and lavender is a character group.)

How to remove extra spaces in a xml formatted string

Hi,
I am trying to remove extra spaces between the xml tags. For
example, if a string is something like
' <header 1> <header 2> test </header 2> </header1>'
I want to get rid of the spaces only between the closing tag of header 1 and opening tag of header 2 and closing tag of header 2 and opening tag of header 1, in short ,I want to remove the extra spaces between the tags if there are no other characters between them. I do not want the remove the spaces between closing tag header 2 and opening tag of header ,as there is occurence of other characters.
I am aware that this can be done by looping through the string and using instr to identify the characters '<' and '>', but I would like to use it as a last resort only.
Can anyone suggest me a better way of doing it in a single go by manipulating the data?
Any help is really appreciated.
Regards,
Anil.

You can use the replace function. If you only expect one extra space, then:
scott@ORA92> select replace ('<header 1> <header 2> test </header 2> </header1>',
2 '><', '><')
3 from dual
4 /
REPLACE('<HEADER1><HEADER2>TEST</HEADER2></HEADER
<header 1> <header 2> test </header 2> </header1>
If you expect more extra spaces, then you will need to wrap another replace function around it for each space, for example the following will eliminate up to three spaces:
scott@ORA92> select replace (replace (replace ('<header 1> <header 2> test </header 2> </header1>',
2 '> <', '><'), '> <', '><'), '> <', '><')
3 from dual
4 /
REPLACE(REPLACE(REPLACE('<HEADER1><HEADER2>TEST
<header 1><header 2> test </header 2></header1>

Why can I not remove extra spaces from Mail when composing?

I am using Mail Version 8.1 and I cannot find a way to remove extra spaces from between my lines while composing. Every Enter makes the cursor go down two lines and there is no way to type in the space in between. There seems to be now way to see the html or any tags that can be causing this, and I cannot seem to find any setting to change the line spacing either. Does anyone know where to find any of these options so I can simply make the text single space?

Open a message-editing window. Under the Edit menu, deselect all the options in the Spelling and Substitutions sub-menus. Test.

Remove extra space

Hi master,
how to remove extra space from the tables and columns
thanks

Apparently table and/or column names that have been created don't match those being used in queries.
This typically happens when you use tools that generate scripts with object (table/column) names in "double-quotes" thus causing them to be CaSe-SeNsItIvE to Oracle.
See this short demo of sensitive object names :
SQL> create table "My Table" (col_1 varchar2(5)); -- Sensitive Name used
Table created.
SQL> desc my table
Usage: DESCRIBE [schema.]object[@db_link] -- cannot find an object by the name "my table"
SQL> desc "My Table" -- I must explicitly use the Sensitive Name now !!!!
Name                                                                     Null?    Type
COL_1                                                                             VARCHAR2(5)
SQL> desc "MY TABLE" -- The name does not map across CASE either !
ERROR:
ORA-04043: object "MY TABLE" does not exist
SQL> create table MY TABLE (col_1 varchar2(15)); -- Normally, object names cannot contain spaces !
create table MY TABLE (col_1 varchar2(15))
ERROR at line 1:
ORA-00922: missing or invalid option
SQL> create table MY_TABLE (col_1 varchar2(15)); --- this is the correct way to name an object. DON'T USE "double-quotes" ; DON'T USE SPACEs
Table created.
SQL> desc MY_TABLE -- the properly named
Name                                                                     Null?    Type
COL_1                                                                             VARCHAR2(15)
SQL> desc "My Table" -- the first , Sensitive name
Name                                                                     Null?    Type
COL_1                                                                             VARCHAR2(5)
SQL>Hemant K Chitale
http://hemantoracledba.blogspot.com

Can we change the data type of a field based on the value of the field

HI Gurus,
My Requirement is as below -- Could you please guide me
in the Printable Adobe form -- for ex - as usual for dates fields in the Object Pallette the object type is a date/time field and for quantity/currency fields corresponding fields are taken
now in case the either the date, quantity or currency is initial in place of displaying 0.00 or empty date we need to display N/A (Not Applicable)
for this I would like to change the data type of the field
to put it simply --
we need to change the data type of date field from DATE&TIME to Char type to hold N/A or Quantity field to Char field to hold N/A
how can we realize this in SAP adobe forms
Thanks in Advace
Ramchander Rao.K

Hello Ramchander,
     You cannot change the data type of the field at run time in Adobe forms because the type of field you choose at the time of design level is associated with the data type itself.
If you want to achieve your requirement, then your main idea should be to set the data type as CHARACTER itself while designing the field in the adobe form itself. CHAR field will comfortably hold the value of Calculation/amount field, Currency field, Amount, Date, Time HHMMSS, Unit Accuracy, Currency key, Floating point number, Numeric text, Client, Language and many other data types.
After designing the field as TEXT field in Adobe form you have two options.
Option 1:
Select the Date field initially as type TEXT field or CHAR field in Adobe forms.
Suppose the name of the field is TEXTFIELD1, then write the Javascript code on this field in Initialize event as below.
if ( this.rawvalue == null )
     this.rawvalue = "N/A";
If the field is not blank, then it will show the date. Else it will show "N/A".
Option 2:
Select the Date field initially as type TEXT field or CHAR field in Adobe forms. Do the formatting part in ABAP itself. It will increase the performance. Avoid Javascript as much as possible.
Suppose you have a DATE variable l_dats of type DATS. Then take another variable l_date of type CHAR. Then write the below ABAP code.
MOVE l_dats TO l_date.
IF l_date IS INITIAL.
     l_date = 'N/A'.
ENDIF.
Bind the l_date to the TEXT field in the form.
Even in this case, if the field is not blank, then it will show the date. Else it will show "N/A".
But I will suggest you to use Option 2 of keeping the AMOUNT, QUANTITY, DATE, TIME fields etc as CHAR or TEXT fields in Adobe form and do the required formatting in ABAP itself.

How do I make a text box solid if the value in the field is greater than 0 and do this for all recor

Hello,
I have several text boxes on a document, and wish to make the boxes either solid or visible if the value in the field is greater than 0.
I am using an excel file for the data, each cell with either 1 or 0 (true or false).
Any help would be appreciated.
Thanks,
BJ

Yes, I also sent an email regarding this problem.
I am using XNET to write a custom device for PXI-8516 LIN card.
I've attached a couple snippets showing where I've tracked the problem.
The only error that I've seen comes from the XNET Wait vi in the timeout snippet. I believe that error occurs because frame queued in the write snippet is never transmitted by the LIN card.
Attachments:
Timeout_Error_Snippet.png ‏22 KB
XNET_Write_Snippet.png ‏24 KB

How to give values to the field in free selection via call transaction?

Hi,
I'm using call transaction for transaction "FAGLB03". And i'm passing the values for the fields company code, account number and year using the respective parameter id. But i need to pass the value for Profit center also, which is in the free selction button (near to variant button). I have tried by passing the value thorugh the parameter id. but it is not taking up. The code is as follows:
    SET PARAMETER ID 'ACC' FIELD lv_saknr.
    SET PARAMETER ID 'BUK' FIELD lv_rbukrs.
    SET PARAMETER ID 'GJR' FIELD lv_ryear.
    SET PARAMETER ID 'PRC' FIELD lv_prctr.
    CALL TRANSACTION 'FAGLB03' AND SKIP FIRST SCREEN.
Here the value of profit center is not filling up in the screen.
If anybody have any clue please replay back.
Thanks in Advance.

Hello Pothiraja
If the free selection parameter cannot be filled this way you may try to call the corresponding report using the SUBMIT statement. <b>SUBMIT </b>has the option
... WITH FREE SELECTIONS texpr
For details refer to the ABAP keyword documentation for SUBMIT -> selscreen_parameters.
Regards
Uwe

How to enter values in the fields of standard SAP Infotype e.g. IT0024

Hi,
How to enter values in the fields of standard SAP Infotype?
e.g. I want to enter values in infotype IT0024(Qualifications) in the field AUSPR(Profincy):-
1-Level 1
2-Level 2
3-Level 3
4-Level 4
5-Level 5
Thanks,
Ameet

Hi Divya,
I checked with the screen and report which is mentioned by you. But I want to modify/make changes that should appear in the screen when you view details for a particualar employee in Qualifications(IT0024).
Please refer the screen 2000 of module pool MP002400 in SE80. In that screen I want to make change as listbox with key.
Can it be achieved in the same way as mentioned by you before by making standard SAP report as Z and then modify using layout editor?
Please help me out. I think I am almost there.
Thanks,
Ameet

How to get the value of the field 'KOMP-NETWR' in Pur.

Hello everyone,
how do i get the value of the field 'KOMP-NETWR' in the purchase order.
thanks
Arnaud

Hi,
Try this code similarly for komp
REFRESH i_komv.
CLEAR i_komv.
CALL FUNCTION 'PRICING_REFRESH_TX'.
CALL FUNCTION 'REFRESH_TAX_TABLES'
EXPORTING
LIVERY        =
LOOP AT i_ekpo INTO wa_ekpo.
wa_taxcom-bukrs = wa_ekko-bukrs.
wa_taxcom-budat = wa_ekko-bedat.
wa_taxcom-bldat = wa_ekko-bedat.
wa_taxcom-waers = wa_ekko-waers.
wa_taxcom-hwaer = wa_ekko-waers.
wa_taxcom-kposn = wa_ekpo-ebelp.
wa_taxcom-mwskz = wa_ekpo-mwskz.
wa_taxcom-wrbtr = wa_ekpo-netwr.
wa_taxcom-xmwst = 'X'.
wa_taxcom-lifnr = wa_ekko-lifnr.
wa_taxcom-ekorg = wa_ekko-ekorg.
wa_taxcom-matnr = wa_ekpo-matnr.
wa_taxcom-werks = wa_ekpo-werks.
wa_taxcom-matkl = wa_ekpo-matkl.
wa_taxcom-meins = wa_ekpo-meins.
wa_taxcom-mglme = wa_ekpo-menge.
wa_taxcom-mtart = wa_ekpo-mtart.
wa_taxcom-land1 = wa_ekko-lands.
wa_taxcom-ebeln = wa_ekpo-ebeln.
wa_taxcom-ebelp = wa_ekpo-ebelp.
CALL FUNCTION 'CALCULATE_TAX_ITEM'
    EXPORTING
      i_taxcom                  = wa_taxcom
    IMPORTING
      e_taxcom                  = wa_taxcom
    TABLES
      t_xkomv                   = i_komv
    EXCEPTIONS
     mwskz_not_defined         = 1
     mwskz_not_found           = 2
     mwskz_not_valid           = 3
     steuerbetrag_falsch       = 4
     country_not_found         = 5
     OTHERS                    = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear wa_taxcom.
ENDLOOP.
LOOP AT i_komv INTO wa_komv.
CASE wa_komv-kschl.
*EXCISE DUTY
    WHEN 'JMOP'.
      v_jmop = v_jmop + wa_komv-kwert.
endcase.
endloop.
Hope this might be of some use.
Regards,
sirisha

How to put the SQL-statement returned value into the field (as a default)

Hi,
I am using Developer/2000 (Forms Designer) under windows 98.
Please tell me how to put the SQL-statement value (as a default value) into the field before enter-query mode. Noted that I have tried the following ways but still some problems:-
1) Place the SQL-statement into PRE_QUERY trigger in the form/block level.
There is a message box which ask 'Do you want to save the changes?'.
2) Place the SQL-statement before execute enter_query. There is still a
message box which ask 'Do you want to save the changes?'.
Any hints? Thanks. Urgent.

solved it!
1) Suppress DEFAULT save message
if form_failure then
raise form_trigger_failure;
end if;
2) Place the default value before enter-query.
Ref: Title='Default value in query field in ENTER_QUERY mode' in designer forum by CVZ
form level trigger
============
WHEN-NEW-ITEM-INSTANCE
=======================
if :system.mode = 'ENTER-QUERY' then
:block.item := 'default waarde';
end if;
3) Suppress the changes whenever leaving the default field.
if :block.item is null then
-- assign statement
end if;

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

How to set the default values of the field of the context.

Hi Experts ,
I want to set the default value of the field of the context.
Where and how this declaration should be done.
Thanks in Advance.

In the context tab of the view. Select the attribute for which you want to set the default value.it will show the properties at the bottom. set the Default value property to the value which you want to set as the default value.
Regards
Naresh

How to change a value of the field Selection Conditions in Manage- Request

Hi,
How to change manualy a value of the field Selection Conditions in Manage infocube -> Requests ?

Hi,
Here is the reason i need to do this:
The data is loaded by DTP in process chain. Overlaping requests are deleted. But, iIn some cases requests with the same selection options need not to be deleted. My idea was to change selection options in Manage(infocube) with Abap program without changing selection options in DTP filter, so that the system would not recognize requests as "overlaping requests".
So, where is the information about shown in the field Selection Options is stored? In which tables?
Thanks
Tigr_Z

Remove extra space value of the field in text element

Similar Messages

Maybe you are looking for