Remove Prefix

Hi Experts,
      I am getting my XML output has
<?xml version="1.0" encoding="UTF-8"?>
<ns1:abc xmlns:ns1="http://abc.com">
   <ns1:First_Name>44</ns1:First_Name>
   <ns1:Last_Name>444</ns1:Last_Name>
</ns1:Profile>
BUt here in this XML I have to remove prefix ns1:
and my desired output should be as below
<?xml version="1.0" encoding="UTF-8"?>
<abc xmlns="http://abc.com">
   <First_Name>44</First_Name>
   <Last_Name>444</Last_Name>
</abc>
I tried all the ways plz give me solution for this
Thanks in Advance
Regards,
Prasad

double check, if you have put parameter anonymizer.acceptNamespaces correctly.
It should be
http://abc.com ''
'' = two apostrophes

Similar Messages

Remove prefix at the end?

I'm using apple scripts with Automator to remove prefix from files. How can I remove prefix at the end? For example, the file name is test01.mov. I want it to be test.mov
I have found this script but this script works in front. I'm not I programmer and I can't make any sense of the script.. Can any one help me out?! Thanks!
repeat with thisFile in input
                    tell application "Finder"
                              set fileName to name of (thisFile as alias)
                              set fileName to (do shell script "echo " & quoted form of fileName & " | sed 's/^[0-9]*//'")
                              set name of thisFile to fileName
                    end tell
          end repeat

I can't help with Automator or scripts, but clarifying your question -
A 'prefix at the end' is called a suffix. By definition, a prefix can only be at the beginning of something.
And, I think you want to remove something from the end of the file's name (the filename) rather than from the file itself.

How to remove prefix namespace in Xml from XmlBean

I am trying to generate XML from XML Bean but i am getting namespace prefix in all my xml elements.
For example
<abc:Cutomer xmlns:abc="http://www.xyz.com/pqr>
<abc:Name>
I don't have this namespace prefix in my XSD (imported in Weblogic workshop).
Is there any way that I can remove this prefix from my xml elements?
Also, I don't need xml namespace in my xml string.
Is there any way that I can generate xml without having namespace?

Hello ,
I think this issue as been discussed earlier in this forum. Refer follwoing link..
http://forums.bea.com/bea/message.jspa?messageID=400000090#400000090
Regards,
Kuldeep Singh.

Remove Prefix in RF scanner

Hi All,
Can anyone advise me how to remove the prefix when reading the barcode label?
I designed an RF screen with material number with standard field RLMOB-MATNR. But the labels that we receive is coming with a prefix "P" (part no.) in barcode. When I am trying to scan the barcode it is reading the prefix 'P' also.
Is there a way that we can suppress the prefix 'P' while scanning the barcode?
Any quick help is much appreciated.
Sailesh.

You can't "remove the prefix" because that refers to the namespace that is an integral part of the element. Removing the prefix would be like changing the element name. You would have to create a new element with the same element name but no namespace, and copy all the children from the old element to the new one.

Remove prefix in an XML element

Hi,
I have an element with the prefix:
<tr:ElementName>
</tr:ElementName>
Could someone please tell me how can I remove the prefix "tr"?
If I use element.setPrefix(" "); I will get an error message:
org.w3c.dom.DOMException: DOM002 Illegal character
Thanks

You can't "remove the prefix" because that refers to the namespace that is an integral part of the element. Removing the prefix would be like changing the element name. You would have to create a new element with the same element name but no namespace, and copy all the children from the old element to the new one.

Remove prefix xml in OSB

hi,
i have this xml
<operacionDummy xmlns="http://sample.services.dummy/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<arg0 xmlns="">
<fechaOperacion>2010-04-29T16:17:34.687000-04:00</fechaOperacion>
<valorAuditoriaNuevo>2</valorAuditoriaNuevo>
</arg0>
<arg1 xmlns="">
<capitalSubscrito>100000.0</capitalSubscrito>
<razonSocial>Razon Social3</razonSocial>
</arg1>
<ns1:ubicacionWebDTO xmlns:ns1="//sample.services.dummy/">
<ns1:direccion>[email protected]</ns1:direccion>
<ns1:idTipo>E</ns1:idTipo>
<ns1:idUbicacionWeb>1</ns1:idUbicacionWeb>
</ns1:ubicacionWebDTO>
<ns1:telefonoDTO xmlns:ns1="//sample.services.dummy/" xsi:type="ns1:telefonoDTO">
<ns1:codigoAcceso>0212</ns1:codigoAcceso>
<ns1:idPais>1</ns1:idPais>
<ns1:nombrePais>Venezuela</ns1:nombrePais>
<ns1:numeroTelefonico>2222222</ns1:numeroTelefonico>
<ns1:tipoUbicacion>O</ns1:tipoUbicacion>
</ns1:telefonoDTO>
</operacionDummy>
i want this
<operacionDummy xmlns="http://sample.services.dummy/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<arg0 xmlns="">
<fechaOperacion>2010-04-29T16:17:34.687000-04:00</fechaOperacion>
<valorAuditoriaNuevo>2</valorAuditoriaNuevo>
</arg0>
<arg1 xmlns="">
<capitalSubscrito>100000.0</capitalSubscrito>
<razonSocial>Razon Social3</razonSocial>
</arg1>
<arg2 xmlns:ns1="//sample.services.dummy/">
<direccion>[email protected]</direccion>
<idTipo>E</idTipo>
<idUbicacionWeb>1</idUbicacionWeb>
</arg2>
<arg3 xmlns:ns1="//sample.services.dummy/" xsi:type="ns1:telefonoDTO">
<codigoAcceso>0212</codigoAcceso>
<idPais>1</idPais>
<nombrePais>Venezuela</nombrePais>
<numeroTelefonico>2222222</numeroTelefonico>
<tipoUbicacion>O</tipoUbicacion>
</arg3>
</operacionDummy>
Basically i want to remove the prefixes and make a rename...
I want to acomplish this by actions in the osb or by XQuery transformations..
Thanks in advance
Edited by: gfandino on 29-abr-2010 16:38
Edited by: gfandino on 29-abr-2010 16:38

Xquery function of string replacement should be easiest. (definitely not suited for some use cases)
Refer--
Re: Namespace replace/rename issue in ALSB
Re: OSB 10gR3, XSD's, namespaces, etc
Manoj

Remove prefix numbers from filename

There are like 500 photos which have numbers prefixed before their name. They are all in iphoto 09. The Batch change options doesn't allow text to be replaced. The automator action for renaming finder items does allow replace however one has to specify what to replace, which in my case would be random numbers from 1 to 900. Is there any way I can prefix this images from 1 to 500 by first replacing the first three characters from the images, which in our case are all different numbers?
Neerav

Hi Neerav,
Maybe you can try doing this with an applescript. After you get/select the files somehow in Automator, add the *Run Applescript* action after that. Add this piece of code after the *on run {input, parameters}* line:
repeat with thisFile in input
tell application "Finder"
set fileName to name of (thisFile as alias)
set fileName to (do shell script "echo " & quoted form of fileName & " | sed 's/^[0-9]*//'")
set name of thisFile to fileName
end tell
end repeat
This will delete any numbers that appear in the beginning of the file name. This approach is better than deleting the first three characters in case the numbers aren't padded with leading zeroes.
Anyway, I haven't tested this script myself so back up some files and run it on a such a small sample so that if there are any bugs (I don't expect any) we can remove them.
Message was edited by: hungryjoe

Remove prefix L01 from olap universe

HI Experts
I need to remove L01 or prefix from the object name in olap universe ... i found tools- options in that there is replace preifx l00, l01 but i am nable to use it properly can some one help
Example : if object is L01 business partner it should appear Business partner only it should not have L01
regards

You can find some handy tool Based on VBA to mass update the texts of your universe and replace the L00 and L01 prefixes. As far as i could find out in XI 3.1 currently is the only way, unless you want to do it manually one by one. Have a look at the links below. I can confirm that it works.
[http://www.forumtopics.com/busobj/viewtopic.php?t=21029&postdays=0&postorder=asc&start=0]
[Remove L01 prefix from Olap uni;

Remove prefix from dimension id in *rec statement

Hi,
I search through the documentation and find that to add a prefix, the statement should be
*REC(ACCOUNT = ACC_ + ACCOUNT.GROUP).
Does anyone knows how to remove the prefix when creating new records,
for e.g. in my account dimension, I have a member "ACC_HC". After processing, it should generate a record using account "HC"?
appreciate you help. Thanks!
Rgds
PH

I don't know if I understand you correctly, but what you want to do is not use the prefix?
Cause then you would just type
*REC(ACCOUNT=ACCOUNT.GROUP)
and it would generate a record without prefix.
Regards,
Tim Vierhout

Remove prefix ns from target xml

Hi Guys,
I have a target file that is as follows
<?xml version="1.0" encoding="UTF-8"?>
<ns:MT_Case1 xmlns:ns0="urn:Case:Case1">
<Field1></Field1>
<Field2></Field2>
<Field3></Field3>
< ns /MT_Case1>
How can I remove the pre fix ns from the target xml?
can ne one help pls?
Edited by: Ravindra Teja on Jul 6, 2011 6:58 PM
Edited by: Ravindra Teja on Jul 6, 2011 7:00 PM

You can add or remove the namespace prefix using XMLAnonymizerBean module.
Refer this [link|http://help.sap.com/saphelp_nw04/helpdata/en/45/d169186a29570ae10000000a114a6b/content.htm]
BTW, this namespace prefix might not cause any impact.. What do u test? If the namespace prefix nso is removed using xmlspy editor then you dont get namespace prefix in the element tag.

Removing Prefix of members/alias in report Scripts

I need to remove the pre fixes of all members/alias of a couple of dimensions through report script.( no need to modify the outline)
For example Costcenters start with C_ , which needs to be removed when the report is created( I know everybody is going to ask why it's not used already in the alias, but there was a requirement for the prefix)
I am using {RENAME } for specific members, but there are quite a few members with the prefix and I want to know if there's a way to remove them through report scripts
Thanks.

Another alternative frequently used, especially with report scripts is the use of alternate alias tables. There is the option to add up to, last time I checked, up to 8 alias tables. Most functionality is based on the "Default" alias table, but Report Scripts allows you select an alternate alias table by using "<OUTALTSELECT" by dimension. If you set the members aliases in the alternate table "Real_Cost_Center", then you could do...
<OUTALTSELECT ("Real_Cost_Center")
As a bonus, the usage of this alternate alias table means you can actually load data using the member name or any one of the aliases across all alias tables. The main "downfall" is the uniqueness requirement still applies to the alternate alias tables. Alternate alias tables are also frequently used when using any of the BI suite, where a given view/report/etc would benefit from short names.
Just another alternative...
Good Luck!
Kevin

Remove prefix form IP phone display CME

Hello
I have a CME configured to add a prefix on the outgoing pots dial-peer. Connection to the PSTN is done via a E1.
When we dial a number and the connection is made the ip phone displays the prefix followed by number we dialed. For example we dial 123456789 and the prefix is 99999 when the call is connected the ip phone displays 99999123456789.
How can I remove the prefix from the phone's display?

Have you tried to use a voice translation rule to add the prefix instead of doing it directly on the outgoing dial-peer?
voice translation-rule 40
rule 1 /^$09[1236].......$$/ /90790\1/
voice translation-profile PSTN-OUT
translate called 40
dial-peer voice 290 pots
corlist incoming call-Internas
corlist outgoing call-Telemoveis
description *** MOBILE - PSTN ***
destination-pattern 09[1236].......
direct-inward-dial
port 0/1/0:15
forward-digits 9
translation-profile outgoing PSTN-OUT
no prefix
Please remember to rate helpful responses and identify helpful or correct answers.

How to remove prefix from AD group names in ldap auth. provider?

Hi all,
I'm using weblogic 10.3.5 and LDAP authentication provider for accessing microsoft AD.
Group names in AD are created and look like this: PREFIX_basic_user, PREFIX_advanced_user...
but enterprise roles in ADF application are created like this: basic_user, advanced_user...
Is there a way to map AD groups to enterprise roles trough LDAP Authentication provider without adding PREFIX_ on enterprise roles in ADF application?
Thanks in advance

Powershell (or vbscript if you want to be old school).
You can trigger a powershell script which will remove the offending user(s) easily enough with out resorting to a TOLDAP pass. Nearly any script type thing would work but powershell is preferred. It can be triggered separately from the TO AD stuff and will take multiple objects to run in one pass if you can construct the command line (or create a text file and feed it in).
Otherwise, TOLDAP is the way to write to AD...
Peter

Configure : add prefix and remove prefix

Hello.
I have 4 pods in our voip netowrk.
Each pod have owner PBX system.
But they have complex dial plan.
So I have to configure as simple as possible.
Thus, I have good idea to resolve.
In my opinion, I'm gonna give prefix number both of them. Pod-A is 1, Pod-B is 2, Pod-C is 3, Pod-D is 4.
for example, I'll add prefix 1 all phone number entering from pod-A's pbx to gateway in pod-A on pots dial-peer.
When the call flow pod-B, I'll strip the prefix 1 from gateway in pod-B to pod-B's PBX on pots dial-peer.
Is it possible?
Actually, I had a test, but i couldn't success it....
may be...wromg configuration...
Could you please advice to me to reslove? and any other good idea?
Regard,
John.

Hi John,
It is important to note that the DNIS you receive from the PBX really should have the pod code prefixed before the gateway receives it. It is important because you have complex dial plans and you will be very limited by the number of translations you can perform on each trunk.
This is a very simple example, but it should give you some idea of how this will work.
Dial-peer 10 is the inbound pots dial-peer on the source gateway. Dial-peer 20 is outbound to the POD A gateway.
Dial-peer 30 is the inbound voip dial-peer on the POD A gateway. Dial-peer 40 is the outboud pots dial-peer on the POD A gateway. You will replace ....... with the correct number of digits or the T parameter if the digit strings are variable.
direct-inward-dial may be required on pots peers if the interface supports DID.
On source gateway:
dial-peer voice 10 pots
port x/x
dial-peer voice 20 voip
destination-pattern 1.......
session target ipv4:
dtmf-relay h245-alpha
codec g711ulaw
no vad
On Pod A gateway:
dial-peer voice 30 voip
incoming called 1.......
codec g711ulaw
no vad
dial-peer voice 40 pots
destionation-pattern 1.......
port x/x:x
Again, if you must prefix/translate in the gateway then you'll be limited by the number of translations (15) you can configure per trunk.
Here's some examples of how to prefix the DNIS. I'm assuming PodA numbers begin with 555321, PodB 666321, and PodC 777321. Of course this will depend on your dial plan.
voice translation-rule 1
rule 1 /$555321$$.*$/ /1\1\2/
voice translation-rule 2
rule 1 /$666321$$.*$/ /2\1\2/
voice translation-rule 3
rule 1 /$777321$$.*$/ /3\1\2/
voice translation-profile podA
translate called 1
voice translation-profile podB
translate called 2
voice translation-profile podC
translate called 3
dial-peer voice 10 pots
translation-profile incoming podA
port A/A
dial-peer voice 11 pots
translation-profile incoming podB
port B/B
dial-peer voice 10 pots
translation-profile incoming podC
port C/C
Michael
Let me know if this helps by rating the post.

Remove prefix when creating menu for user in pfcg

Can I change the way pfcg creates a use menu? It now starts with the rolename and then the logical SAP menu path. When I have different roles with the same path the "collapse menu" option does not work as the two start with a diffent role name. Can I change this that pfcg starts with the logical path and not with the role name?

Hi
If you are getting the role as prefix in the user menu
Go to the initial screen (when you logon onto the screen)
Menu Tab click on Extras
->Settings
In the settings if you have checked the option of show first level
-> Show first Level (if un checked you will not get the role name)
This is what my understanding of your question.
If not let me know exact problem try to help you.
Cheers
Soma
Message was edited by:
soma pradeep

Remove Prefix

Similar Messages

Maybe you are looking for