Remove response header

Hi,
Can anyone please show me how to remove a header from a servlet response? I use tomcat so if tomcat special features needed can be done with it... Can anyone please show me a small example of how to do it?
10x
Tomer

A response is worthless without a header.
What exactly do you want to do finally?

Similar Messages

Removing "server" response header in Netscape Enterprise Server 4 SP2

Hi folks,
I've been searching around and I couldn't find how to turn off the "server" response header for the aforementioned web server. I've tried adding ServerString "" to magnus.conf but that doesn't work. I guess that only works for versions 6.x.
Any idea where I can make the changes to 4.0?
Thanks in advance.

I don't believe you can suppress the "server" response header in the release that you are using. Look at:
http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=finfodoc%2F67865&zone_110=67865%2A%20
Also, note that 4.x versions of web server are no longer supported.
Thanks
Manish

Need to remove the header and footer regions on one page

Hi,
I have a requirement to remove the header and footer regions on one page only. The regions I'm referring to contain the following:
Header:
Company logo, Home link, Logout link, Preferences link
Footer:
Copyright info, Privacy Statement, Home link, Logout link, Preferences link
These are the standard Oracle header and footer regions/page items, so I am not specifying a particular page name, although it would be the create time cards page we want to modify.
Also, we only want to remove these regions/items from ONE page, not an entire responsibility.
Any help is greatly appreciated.
Thanks!
Suzanne

Hi,
In order to hide,
Home link, Logout link, Preferences link
Use this code in the processrequest of the controller on the page on which you want tohide these
OAPageLayoutBean page = pageContext.getPageLayoutBean();
page.prepareForRendering(pageContext);
page.setGlobalButtons((oracle.cabo.ui.UINode)null);
And for hiding the Copyright info, Privacy Statement:
Click on Personalise page link
then Click on Choose Context
Choose "OAFooter" as Scope
and click "Apply"
and then Personalise the Copyright and Privay Statememnt icon and set rendered as False.
Thanks,
Gaurav
Edited by: Gauravv on Aug 25, 2009 8:36 PM

Removing the header and footer in Pages

I just began to use Pages after purchasing a new ibook. In AppleWorks, headers and footers were never inserted by default. In Pages, how can I remove the header and footer in Pages so I can have more space for the body section of the document?

I had already set page margins to zero, and I disagree with you: Headers and footers still appear with a height of approximately 1/8 inch.
SInce I posted my previous message, I have experimented a bit. I was able to (almost but not quite) totally eliminate the header and footer by clicking into the header and footer area and reducing the font size to the absolute minimum. After having done that, the body was basically in-line with 0" on the vertical page ruler.
Also, in my opinion, whether or not most printers do a full page bleed is irrelevant. I should be able to work with the page body without its being offset from the page ruler if I don't want to employ a header or footer.
Rusty

How to remove the header in Report from SQVI

Folks,
I created a report by joining 4 tables in SQVI, the output data is around 200 pages. I need to remove the header from the report so I can down load to a excel.
Can some tell me how to switch of the header in SQVI ( Layout Mode). I did this before using Legend on/off but I quite didn't remember how I exactly did it.
Thanks,
Kumar

Hi,
It is not about the thing that, whether your source is XML or flat file. If you dont want some thing in your source file , dont consider it and dont map it with your target structure. think that, your not getting the header in your source. What is the header here.
<Emp_details>
<Emp_Id> Employee No </Emp_Id>
<Emp_Name> Employee Name </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 1234 </Emp_Id>
<Emp_Name> xxxx </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 5678 </Emp_Id>
<Emp_Name> yyy </Emp_Name>
</Emp_details>
you have two fields under node Emp_details. What do u want to avoid here?
Regards,
Reyaz

I want to remove the header and footer when printing from my mac, i can do this in the Page Setup on my PC but not on the Mac. I can do it each time I print but then it resets. How do I make a universal change?

I want to remove the header and footer when printing from my mac, I can do this in the Page Setup on my PC but not on the Mac. I can do it each time I print but then it resets. How do I make a universal change?
== This happened ==
Every time Firefox opened

Go to the "File" menu, then "Print." The window that appears will have three drop-down menus at the top.
The first is labeled "Printer",
The second is "Presets".
The third is unlabeled but has "Copies & Pages" selected by default.
Click on that third menu and select "Firefox" near the bottom of the list.

HT1349 how do you remove the header and footer from a document

how do you remove the header and footer from a document

It depends upon the app you are using.

How to remove the header tag in the XML data ?

Hi All,
I am sending an XML data from SFTP to Proxy, in that I want to remove the header tag (first tag) from the xml, while loading the data. how to do that ?

Hi,
It is not about the thing that, whether your source is XML or flat file. If you dont want some thing in your source file , dont consider it and dont map it with your target structure. think that, your not getting the header in your source. What is the header here.
<Emp_details>
<Emp_Id> Employee No </Emp_Id>
<Emp_Name> Employee Name </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 1234 </Emp_Id>
<Emp_Name> xxxx </Emp_Name>
</Emp_details>
<Emp_details>
<Emp_Id> 5678 </Emp_Id>
<Emp_Name> yyy </Emp_Name>
</Emp_details>
you have two fields under node Emp_details. What do u want to avoid here?
Regards,
Reyaz

Problem while setting response header in a filter

Hi,
I am intercepting response in a filter and trying to modify the response header, so that my subsequent class would get the header in request .
Somehow i don't get the header in request. I don't know whats going wrong.
I have few more filters other than the one in which i m modifying the response header.
I change the response header before calling doFilter() method.
Where am i going wrong ?

The subsequent servlets and filters will get the same request that the first filter has. The passing to the next servlet is via a method call.

How to reset the response status and response header

Dear Masters
Actually we are using NTLM Authentication process to get the system login id for our web application. The problem which I am getting is after running the NTLM Authentication Code I am not able to call the action class. It is telling 400 Server error bad request. I am using Struts Dispatch Action Class. In Dispatch Action I will be passing a name (eg. method) as a parameter in struts-config.xml file and using that parameter I will be calling the respective method in the Action class. The problem which I am facing is after running the authentication code I am not able to fire the action class. It is telling the error in the console as "parameter named method is not found". Actually in NTLM Authentication code they are setiing the response status to www-authenticate,NTLM. If I reset the response status back to the normal form I think i will be able to fire the action class. Please give me a suggestion on how to reset the response status and response header back to the normal form. Any solution to this is appreciated. Please respond your reply as soon as possible. Thanks in advance.
Regards
Ramesh

Hi,
I think, a servlet filter is what you need. Please check the following URLs on how to go about creating a filter.
http://dev2dev.bea.com/pub/a/2005/05/decorators.html
http://www.onjava.com/pub/a/onjava/2003/11/19/filters.html
http://www.onjava.com/pub/a/onjava/2004/03/03/filters.html?page=1
Cheers,
vidyut

Remove DataGrid Header Separator dynamically

Hello,
Scenario: I have a DG with 3 static columns and many dynamic columns added at run time.
I want to have one and only one header for all the dynamic columns.
In a way it can be seen as multiple datagridColumns (without headers) in a single dataGridColumn (with only a header). Now there is a heavy traffic between static columns and the dynamic columns. So I dont think it is possible to have two different DG's.
My Attempts: I tried to use the HeaderSeparatorSkin to remove the header separators so as to give a feel of one single header. But since the headerseparatorskin is removed at DG level it can be either removed for all columns or for none.
My Question: I will have to create a custom DG so as to draw separator skin for few columns and remove for others. But I am not sure how can I do that since using "headerSeparatorSkin" removes it for all columns. Can some one show me a path as to how I can accomplish this?
A very bad way of accomplishing the above is to remove all the header separator skins and then use headerRenderer for the static columns to show a line similar to separator skin. But that is a bad way of coding I guess.
Thanks in advance,
Bhargav

Thank you for the reply Flex harUI.
If I understood right the renderer will extend a DG and will have columnns and only one row. But the row color will not match the the row of the main DG.
Secondly I have using a checkbox renderer to be displayed in the columns created dynamically. The data of this renderer is changing with users interaction. Thus I am not very sure if implementing a renderer inside a renderer should be a good idea.
But I will try and use your suggestion to see if it can be used for my implementation.
Thanks again,
Bhargav

HT5282 remove the header & footer in windows safari 5.1.7 while in printing

Hi,
I want to remove the header and footer while printing the data in windows 7 64 bit OS.
Any one can help me out of this issue.
Regards,
Kathiresh Muthusamy

Removing columns heading for a perticular page in ALV list display

Dear All,
For last page of my ALV list display i need to remove columns heading (Strictly for single page only).
Kindly help me with possible solution.
I am triggering page break by using group attribute in the sort catalogue.( l_v_sortcat-group = '* '. )
Best Regards
Ravishekar Thallapally

if u can catch the page number,
while building fieldcat, put the condition
if sy-page = (page number)
ls_fielcact-fieldname = fieldname.
ls_fieldcat-tech = 'X'.
LS_FIELDCAT-NO_OUT = 'x'.
modify lt_fielcat from ls_fieldcat.
but how r u catching page number?? can u pls tell
endif.
Message was edited by: Hymavathi Oruganti

Wrong content length in response header, ICM

Hello,
When i checked in the SMICM log file i got the error message:
[Thr 1085303104] *** ERROR => HttpClntHdlResponse: client: premature EOS (28980/59150) - wrong content length in response header
Kindly let me know what may be the cause of this error.
Kind regards
Lutz

Hi Raghu and Anil,
here are some more information:
Kernel-Release    700
Compilation       Linux GNU SLES-9
Patch-Level       201
SAP_ABA     700     0019     SAPKA70019
SAP_BASIS     700     0019     SAPKB70019
PI_BASIS     2005_1_700     0019     SAPKIPYJ7J
ST-PI     2008_1_700     0000          -
SAP_BW     700     0021     SAPKW70021
SAP_AP     700     0016     SAPKNA7016
SAP_APPL     600     0015     SAPKH60015
SAP_HR     600     0038     SAPKE60038
ST-A/PI     01L_ECC600     0000          -
ICM Parameter
Services
icm/server_port_0     = PROT=HTTP,PORT=8022
icm/server_port_1     = PROT=SMTP,PORT=0
Hard limits
icm/max_services               = 30
icm/listen_queue_len           = 512
icm/req_queue_len              = 500
icm/max_conn                   = 500
icm/max_sockets                = 2048
Thread handling
icm/min_threads                = 10
icm/max_threads                = 50
icm/min_spare_threads          = 3
Tracing and statistic
rdisp/TRACE                    = 1
icm/tracefile                  = dev_icm
icm/log_level                  = 0
icm/stat_level                 = 1
icm/security_log               = LOGFILE=dev_icm_sec,MAXSIZEKB=500
icm/accept_remote_trace_level = 0
Monitoring
icm/ccms_monitoring            = 1
icm/ccms_refresh_rate (sec.)   = 30
Timeout handling
icm/keep_alive_timeout (sec.) = 60
icm/conn_timeout (msec.)       = 5000
HTTP settings
icm/HTTP/max_request_size_KB   = 102400
icm/HTTP/server_cache_0        = PREFIX=/, CACHEDIR=/usr/sap/PF1/DVEBMGS22/dat
a/cache
icm/HTTP/admin_0               = PREFIX=/sap/admin,DOCROOT=/usr/sap/PF1/DVEBMG
S22/data/icmanroot/admin,AUTHFILE=/usr/sap/PF1/SYS
icm/HTTP/auth_0                = PREFIX=/,FILTER=SAP
HTTP(S) error handling
is/HTTP/show_detailed_errors   = 1
HTTPS (SSL) settings
icm/HTTPS/verify_client        = 1
ssf/name                       =
ssf/ssfapi_lib                 =
sec/libsapsecu                 =
ssl/ssl_lib                    =
Context Quotas
icm/HTTP/context_quota         = 90%
icm/HTTPS/context_quota        = 90%
icm/SMTP/context_quota         = 90%
Memory Pipe settings
mpi/total_size_MB              = 80
mpi/buffer_size                = 65536
J2EE settings
rdisp/j2ee_start               = 0
is/HTTP/default_root_hdl       = J2EE
Content Filter settings
csi/enable                     = TRUE
csi/SAP/csa_lib                = /usr/sap/PF1/DVEBMGS22/exe/libsapcsa.so
Misc
icm/host_name_full             = cipf122.ikk.local
icm/cancel_strategy            = cancel requests without session (stateless)
rdisp/plugin_auto_logout       = 1800
is/HTTP/virt_host_0            = :;
is/SMTP/virt_host_0            = :;
Best regards
Lutz

How to set response header in filter

Hi,
i want to set the response header in my security filter:
private void setHeader() {
          FacesContext ctx = FacesContext.getCurrentInstance();
          if (ctx != null){
               HttpServletResponse response = (HttpServletResponse)ctx.getExternalContext().getResponse();
               response.setHeader("Pragma", "No-Cache");
               response.setDateHeader("Expires",0);
               response.setHeader("Cache-Control", "no-cache");
     }But ctx is always null? What am i doing wrong?
Regards,
barnti

My understanding is you will not have Faces Context in a filter as you have not yet hit the faces lifecycle..
Try the below to get the context.
     * (non-Javadoc)
     * @see javax.servlet.Filter#init(javax.servlet.FilterConfig)
    public void init(FilterConfig config) throws ServletException {
        setFilterCfg(config);
        setServletCtx(filterCfg.getServletContext());
     * Since your typical FacesContext.getCurrentInstance() will probably be
     * null due to the fact we have not hit the faces lifecycle yet, we must dup
     * some of the faces servlet code here to create a new current instance.
     * @param req
     * @param res
     * @return FacesContext which is fresh and virtually empty.
    protected FacesContext getFacesContext(ServletRequest req,
            ServletResponse res) {
        FacesContext facesContext = FacesContext.getCurrentInstance();
        if (facesContext != null) {
            return facesContext;
        //     Use the FactoryFinder to grab the Lifecycle object
        FacesContextFactory contextFactory = (FacesContextFactory) FactoryFinder
                .getFactory(FactoryFinder.FACES_CONTEXT_FACTORY);
        LifecycleFactory lifecycleFactory = (LifecycleFactory) FactoryFinder
                .getFactory(FactoryFinder.LIFECYCLE_FACTORY);
        Lifecycle lifecycle = lifecycleFactory
                .getLifecycle(LifecycleFactory.DEFAULT_LIFECYCLE);
        facesContext = contextFactory.getFacesContext(servletCtx, req, res,
                lifecycle);
        ProtectedFacesContext.setFacesContextAsCurrentInstance(facesContext);
        return facesContext;
    }

Remove response header

Similar Messages

Maybe you are looking for