Remove "zeros" form a txt file created by Labview

Hi everyone,
I got a problem with my txt data and I hope somebody will help here.
I'm doing measuremnts and I'm saving the data in a txt.
The saved data look like that: 0.000000
1.743435
2.899894
My question

duplicate post
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

How to read avi file created in labview from matlab?

in labview, i created an avi file using 'microsoft video 1' compression codec and with each frame i have a string data attached to it.
i tried to load the avi file in matlab for further processing, but 'aviread.m' doesn't seem to work.
also does anyone know in matlab how can i play/read an avi file (created by labview) frame by frame and also have access to the data string attached to each frame?
thanks!

Maybe you can use Java.
http://stackoverflow.com/questions/9155642/how-to-read-an-excel-file-in-c-sharp-without-using-microsoft-office-interop-exce
Or, get excel Viewer.
http://www.microsoft.com/en-us/download/details.aspx?id=10
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Remove control characters in txt file (saved from Excel)

Hi,
I have a txt file that contains invisible control characters and I want to remove those characters. I've been thinking of 2 options
1/ Get the content of the file into a string, then go through each character and basically takes only alphanumeric, new lines, Alt+Enter character (character that is created in txt files in Excel that breaks line). With this approach, I'm stuck on getting the character code for Alt+Enter so if anyone could point out. That helps a great deal.
2/ Use some pattern matching {ctrnl} or something to remove all control characters. I've tried this approach and it didn't work for me.
Please help me with this problem. Any help or suggestion is greatly appreciated.

(saved from Excel) Why not save it as csv?
trivektor wrote:
With this approach, I'm stuck on getting the character code for Alt+Enter so if anyone could point out. That helps a great deal.
You can figure that out with a hex editor or just write a small app that prints int values for each byte, not character, and print the file.
Presumably you already found the Character class and its methods.
Edited by: jschell on Sep 22, 2008 4:29 PM

How to remove balnk line on txt file??

Anyone can help me please?
Tks,
Elber.

may be this helps??
How to Delete a line from a file?
http://unix.ittoolbox.com/groups/technical-functional/shellscript-l/removing-last-line-from-a-txt-file-798004

Reading an entry form a txt file in unix from Forms50

Hello all,
In the windows version D2k there is a pll in the
demo.d2kwutil.pll, this pll can be used to read/writ from/to ini
files
and registry strings.
Can anybody tell me if there is a similar feature in the UNIX
version to read/write entries from/to a text file. Also Is there
a package for working with environment settings.
Thanks,
Sunder
null

It you want to read/write to the client side use text_io.
If you wnat to read/write to the server side use utl_file.
Petr Valouch (guest) wrote:
: Sunder (guest) wrote:
: : Hello all,
: : In the windows version D2k there is a pll in the
: : demo.d2kwutil.pll, this pll can be used to read/writ from/to
: ini
: : files
: : and registry strings.
: : Can anybody tell me if there is a similar feature in the UNIX
: : version to read/write entries from/to a text file. Also Is
: there
: : a package for working with environment settings.
: : Thanks,
: : Sunder
: Hi,
: In all system you can use TEXT_IO build-in package to
: read/write form/to text files.
: Petr Valouch
null

Need to form a txt file

Hi Guys
i have a txt file ,the contect as below
=====================
APPData-CADD_RO_CNZJ
APNET\USER1
APNET\USER2
APPData-CADD_RW_CNZJ
APNET\USER3
APNET\USER4
=========================
what i want was to conver it to a csv file like , can this possible ?
APPData-CADD_RO_CNZJ   APNET\USER1
APPData-CADD_RO_CNZJ   APENT\USER2
APPdata-CADD_RW_CNZJ   APNET\USER3
APPdata-CADD_RW_CNZJ   APNET\USER4

Please don't cross post in the Flash forums.

Will a TDMS file created in Labview 8.2 be readable in later versions

Hi,
I was wondering if there will be any compatability issues with TDMS files when upgrading Labview?, i.e. should a Labview 8.2 still be readable in 8.5 and later. I do not use DIAdem and would very much prefer not having to use it in the future.
Thanks,

Hi
TDMS is a file format that adheres to a standard outlined here. Therefore as long as an application supports the reading of TDMS files, it will not matter what was used to write the file. So in answer to your question, you will be able to open a TDMS file written in LV8.2 in newer versions.
Rich
NI | UK

How do i remove header from a txt file

Hello. I have an aquisition file and this remove_headers.vi does not remove all my header. I m attaching the file, the remove_header.vi and the file after removeing header.
Pls help.
Thanks a lot...
Solved!
Go to Solution.
Attachments:
file.txt ‏223 KB
remove_headers.vi ‏40 KB
file_after1.jpg ‏231 KB

Here you go. You should read as string to get the whole header, then delete the first six rows of the array(as previously mentioned). Finally write it back to a new file.
Regards,
Even
Certified LabVIEW Associate Developer
Automated Test Developer
Topro AS
Norway
Attachments:
remove_headers_mod.vi ‏12 KB

Custom Pipeline component for Removing Trailer record from .txt file

public Microsoft.BizTalk.Message.Interop.IBaseMessage
Execute(Microsoft.BizTalk.Component.Interop.IPipelineContext pc,
Microsoft.BizTalk.Message.Interop.IBaseMessage inmsg)
    IBaseMessagePart bodyPart = inmsg.BodyPart;
    Stream originalStrm = bodyPart.GetOriginalDataStream();
    StreamReader sReader =
new StreamReader(originalStrm,
System.Text.Encoding.UTF8);
    string sRecord = sReader.ReadToEnd();
    MemoryStream memStream =
new MemoryStream();
    StreamWriter sw =
new StreamWriter(memStream);
    inmsg.BodyPart.Data
= memStream;
    inmsg.BodyPart.Data.Position
= 0;
    //"\r\n" is the delimeter for the the record
    string[] separator
= new string[]
{ "\r\n" };
    string[] strArray
= sRecord.Split(separator,
StringSplitOptions.None);
    //Loop untill the last line (i.e ignore the trailer)
    for (int n
= 1; n < strArray.Length; n++)
        sw.Write((strArray[n
- 1] +
"\r\n"));
    sw.Flush();
    memStream.Flush();
    memStream.Position
= 0;
    inmsg.BodyPart.Data
= memStream;
    inmsg.BodyPart.Data.Position
= 0;
    return inmsg;
after Deploying and in Gac, when configuring Receive Pipeline, it shows no properties in Decode stage ?
MBH

There is nothing wrong with your code it removes the lastline, if there is no carriage return on it.
If your input file is like:
line1 <cr><lf>
line2 <cr><lf>
line3
The result is:
line1 <cr><lf>
line2 <cr><lf>
But if your input file is like:
line1 <cr><lf>
  line2 <cr><lf>
line3 <cr><if>
The result is:
line1<cr><lf>
line2<cr><lf>
<empty line>
So when you have a carriage return on the last line, it results in an empty line, can this be the cause of your problem?

[solved] remove packages from a txt file list

as the subject header says, I want to run "pacman -R" and have it read a list of packages from a text file.
Is this possible????
text file is formatted as such....
file1
file2
file3
Last edited by orphius (2013-07-09 08:11:53)

Please remember to mark your thread as [Solved] by editing your first post and prepending it to the title.

Exporting txt files creates blank documents

I recently downloaded Pages '09 from the App Store and like it okay but am having the above issue. Has anyone else experienced this? Seems like a bug but I don't know how to contact Apple directly about this.
Thanks for your input!
Adam

Never got this behavior
Which kind of doc are you using ?
Word Processor or Layout ones
In which format are you trying to export ?
Here the two Pages formats export flawlessly in the different foreign formats.
Knowing exactly what you are doing may help to understand what's weird on your side.
Yvan KOENIG (VALLAURIS, France) mardi 30 août 2011 18:32:47
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

The file path and directory about the .exe file created in LabView, who knows?

I have a project, in the project, VIs and documents(.doc,.txt,.tdms,etc.) in different directories, and when the project run in the labView, it can find the directories and files, but when I created .exe file, I found the directories had changed and I didn't know the directory structure in the file, anyone know it?
Thanks for any reply!
YangAfreet

Have a look at the link in my earlier post:
http://forums.ni.com/ni/board/message?board.id=170&message.id=267439#M267439
LabVIEW Champion . Do more with less code and in less time .

Create txt file at runtime

I'm working on a biological database. People see the data via jsp pages. Now at runtime a very long string is created depending on the needs of the user. This data is derived from different tables and the output string can be up to 5000 characters. Now this output can be used by the user as input for several biological research applications. Now I can create this string at runtime and can print it in a jsp page. But it would be easier for the users if this string would be written at runtime to a txt file(or an extension supported by these applications). So that users only have to press a button, there will be a txt file created and opened in a different browser window (or maybe better would be a dialog box with the choice to save to disk or to open), so that people can easily save it and later on import this file in their applications rather than have to copy the string from a jsp page and paste it in a text editor. How can I do this???
Thanx,
Lieven

Ok I did some research by myself and discovered to set the contenType to application/octet-stream. The problem is now that the extension of the output file is still jsp. So how can I change this to the filename and extension of my choice???
thanx,
Lieven

How to fill a table with data from columns & rows from a txt file

I am trying to fill say:
Myname Myclass Mycollege
Mohan MD Stanford
from a txt file into 3 columns of a table. I can easily do it into a textarea component by
clicking a button:
try{
FileReader fr = new FileReader("F:/CreatorProjects1/stan.txt");
BufferedReader br = new BufferedReader(fr);
String s1="";
String s="";
stantxtarea.setValue(s);
while((s=br.readLine())!=null) {
s1 = s1+s;
s1=s1+"\n";
stantxtarea.setValue(s1);
br.close();
fr.close();
} catch(Exception e) {
e.printStackTrace();
return null;
All table components seem to need a database. I do not use any database. I run exe files that give output to txt files. How to solve it?
I appreciate any help in this regard...
dr.mohan rao

there may be another way. This is some thing some thing I can recommend. You can create property type of ObjectListDataProvider in session or application based on the scope you required. Create web bean class with property you want to show in the column (say col1, col2, col2). Initialize the list property like similar below
List dataList = new ArrayList();
ObjectListDataProvider mytableprops = new ObjectListDataProvider();
try {
//start loop read data from your txt file
//create instance of web bean for each line
//add web bean instance into dataList
//end of loop readind data from txt file
oldpins.setList(dataList );
oldpins.setObjectType(NotificationProfileBean.class);
} catch (Exception ee1){;}
return oldpins;
Sri Thuraisamy

How to read a binary file written in LabVIEW 6.1 using VB ?

How to read a file saved in binay forrmat in LabVIEW 6.1 platform through VB.
Is there any code ?
Thanks

Hello,
LabVIEW files stored in binary can take on just about any format that
you choose, so there will not be a single piece of code that will give
you what you are looking for. You can use VB's standard file
operation functions to read in a binary file created by LabVIEW, just
as you would read in any other binary file. See this page
on Microsoft's web site for more information on the binary file read
operation. How you stored the data in the binary file will
determine how you need to extract it from the byte array. So, if
the first element stored in the file was a 32-bit integer, you could
extract an int from the byte stream to recover that piece of your
data. You would need to know in advance how the file was
formatted in order to successfully retrieve the information. If
you need a reference for the VB functions, the microsoft link above
will get you to some good information.
Cheers,
Matt Pollock
National Instruments

Remove "zeros" form a txt file created by Labview

Similar Messages

Maybe you are looking for