Removing Key Date from variable input screen

Hi Experts,
I am trying to remove the "key date" entry from the variable input screen so users dont see this value when they are trying to run a query. Can you please advise me on how to do this?
Thanks in advance.

Hi Paul,
You would need to open the query and remove this variable from the query definition, or if you need this variable and then remove the ready for input check mark from the variable definition.
Hope this helps...

Similar Messages

  • AWM dimension mapping - is it possible to load data from two input tables ?

    Hello All
    I have two tables ProductFamily (parent level) and Products (child level).
    I want to load a dimension from these two tables where the parent-child relationships are maintained (I am using AWM).
    I created a mapping with these two tables as input, but the data loaded does not maintain the relationships.
    So how do I do that? Is it possible to load dimensions where different levels get data from multiple tables?
    Is there any type of joiner available in AWM?
    thanks
    Few Notes:
    - I do not want to use OWB here as my data is clean
    - In AWM, When I loaded the data from a single view which contained data from both input tables, it worked fine. But this is my worst case option.

    You should use the Snowflake Dimension option in the Dimension mapping screen for the Product Dimension (as opposed to the default dimension mapping style - star schema).
    This will modify the mapping inputs to include a separate parent level key for each hierarchy/level i.e. for each hierarchy/level (unless topmost level of hierarchy), you need to specify the parent level key in addition to the current level key, code/name/description/other attributes etc.
    You can do the mapping in either .... use icons at the top of the mapping screen.
    the drag/drop mode by dragging the relational column onto dimension model - hierarchy/level/attribute
    -or-
    the table expression mapping mode which gives the same effect.. dragging a column onto an attribute sets the expression in <schema>.<table>.<column> format.
    HTH
    Shankar
    Note1: Complete the mapping in one go.. Switching b/w the mapping modes cause the mappings to be reset.
    Note2: Assume your data is correct, foreign key to parent level table: ProductFamily exists in child level table: Products.

  • Pass Key date from Sender to Receiver Query

    Hi,
    We have a requirement to pass key date from the sender query to receiver query.
    In our sender query we derive the key date based on the calendar month value entered by the user on the variable screen and this is used to determine the hierarchy structure to be used for report.
    The user have the option to drill down to detailed query (using RRI) from the context menu option. We would like to use the same key date in the drill down query as the sender query. The drill down query does not have any variable selection.
    In RRI settings I can not see the way to pass on the key date.
    Any help is appreciated.
    Thanks,
    Ankit

    Hi Suman,
    Yes, we do not have variables in the receiver query as we expect the settings in RSBBS to pass the filter values to the receiver query and which is being done consistently.
    The problem is that we do not have any option to pass key date. If required we can add a customer exit variable but how will it work if the user does not want to enter the variable values for the drill down report.
    Thanks
    Ankit

  • How to remove leading zeros from variable

    hi,
       how to remove leading zeros from variable like it_vbap-matnr.
    value in it_vbap-matnr is 000000000000000358
    i want to remove leading zeros so that it become 358
    regards
    deepak

    You can use Function Module <b>'CONVERSION_EXIT_MATN1_OUTPUT'</b>
    This Function Module will eliminate leading Zeros.
    For each MATNR Value read form DB Table,u can eliminate Leading zeros and then modify ur Internal table.
    I think u will not get leading Zeros into utr Internal table when u read from VBAP.
    Bcoz MATNR in VBAP itself have Conversion routine.
    If u r getting leading zeros,U can use following Logic.
    tables:
      vbap.
    data:
       t_vbap like standard table of vbap.
    select matnr
    from vbap
    into corresponding fields of table t_vbap.
    loop at t_vbap into vbap.
      CALL FUNCTION 'CONVERSION_EXIT_MATN1_OUTPUT'
          EXPORTING
            INPUT         =  vbap-matnr
          IMPORTING
            OUTPUT        =  vbap-matnr
      modify t_vbap from vbap transporting matnr.
    endloop.
    Hope this will work.....

  • How to Remove the Icon from the OWL Screen

    Hi All,
    Can we remove the Icon from the OWL screen for some fields without removing the Hyperlink as in the standard for Opportunity for Account Fields as shown below:
    As in the above OWL screen, i have to remove the highlighted Icon.
    Thanks & Regards,
    Malkit Singh

    Hi Malkit,
    You can check Icon in Thing Type like COD_Account__TT screen.
    Once you are in TT screen just go to "Controller" and select "Thing Type Data" from left side pan.
    But how to remove it I don't have any idea.
    Regards,
    Mithun

  • How get Query Monitor (RSRT1) to show variable input screen

    Hi,
    I'm trying to test a query that has variable input and I can't get the variable input screen to give me a chance to input variables.  Since this is key to debugging this query, I need it to recognize my input variables.
    Help!
    Thanks
    Suzanne

    Hi,
    In rsrt, enter the query name -> select query display as HTML -> In the big text box that appears below it type "variable_screen=x", without quotes and it should show you the variable screen.
    Thanks,
    Sri.

  • Memory full. Delete or Remove some data from C: Ph...

    Last night i deleted my messages in my inbox and sent box.
    afterwards i didn't do anything else and suddenly just stopped working. i turned it off and turned it back on and it came up with
    Memory full. Delete or Remove some data from C: Phone Memory.
    and then every so often would come up with system error
    i tried going into things like the photos or video and internet and apps pages to view them but it would just freeze and not do anything...
    i recieved some text that were sent like 3 hours before when i thought it was working and i could text back as when you go to reply you can't go into the screen to start touch screen typing....
    i finally got into the C: drive by connecting to my comp and deleting stuff even though the C: is not full it keeps coming up with this...
    i can't connect to comp and PC suite has never worked to try and update software or something and it now doesn't have the settings to go on internet itself to get updates. i have got vodafone to text me configs for internet but it says its already saved and it still doesn't work...
    any ideas peeps???

    Visit this link:
    /discussions/board/message?board.id=smartphones&thread.id=120841&view=by_date_ascending&page=1
    Throw some kudos, they mean a lot to us
    Cheers,
    DeepestBlue
    5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
    If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

  • How to pass the data from a input table to RFC data service?

    Hi,
    I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
    I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
    Thanks for your answer.

    Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to  be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
    Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
    Thanks.

  • How to combine data from different input forms outside a nested iView

    Hi,
    i try to combine data from different input forms in a single one.
    Because of space reasons in Flex compiling i already use nested iViews. Within these nested iViews its possible to use the 'combine' function to do this.
    But in the main iView I cant compose these function with other elements. I need to do this because of using these model in Guided Procedures with output parameters. These parameters I only get with a 'endPoint'. Unfortunatly its not possible to combine data from different input forms into the 'endPoint'.
    Is there any solution?
    Thanx
    Mathias

    Hi Scott,
    i tried this already and i also tried to map all parameters in the endpoint by drawing lines from the other forms and assign the 'empty parameters' by a formula.
    And when i create a collable object in GP and assign the VC iView, only the parameters of the parent-form (the form who trigger the event) are shown as output-parameters.
    Maybe any other ideas? I cant believe that such a simple thing is not possible?!?!
    In my opinion, thats a bug, that I'am not able to use the combine-operator in the main VC-iView. Whats your mind?
    greets
    mathias

  • How to submit data from multiple Input Ports in single SUBMIT button  click

    Hi,
    I am in SPS8.
    What exactly steps I need to perform to submit data from multiple Input Ports.
    I couldn't able to submit One input Form and one Input Table to BAPI data service in single SUBMIT button click.
    I debugged the VC application in SPS8.
    While debugging, I found that when I click the SUBMIT button in the Input Form, Only data in that Input
    form are being passed to the BAPI, But not the Table Form data.
    If I click on the SUBMIT button in another Input Table, Only data from that table is being passed to the BAPI, but not the Input form data.
    Essentially I need to submit both of them in one SUBMIT button.
    Thanks,
    Ramakrishna

    Ramakrishna,
    From the word document that you sent to me the steps you are missing to map the appropriate information into the BAPI is first you are not mapping all data rows into the table input port. To do this double click on the input table view and change your selection mode from single to multiple. Then when you click on your link between the BAPI and your input table you will see a new option appears under data mapping "Mapping Scope" select All Data Rows.
    That's the first part of the problem to get the BAPI to recognize both the inputs coming from the form and the table eliminate the submit button from the form. Drag and drop a link from the output port of the table view to the Input port of the BAPI. Double click on the link between the BAPI and the table view and open the expressions editor for the two fields:
    1/ Automatic Source
    2/ SKIP_ITEMS_WITH_ERROR
    On the hierarchical folder structure on the right expand expand the Data Fields node to find the fields from the form and map them accordingly.
    Now when you hit the submit button on your table it should pass the BAPI all the parameters from both the form and the table.
    Hope this helps,
    Cheers,
    Scott

  • How to Remove the underline from the selection screen parameter

    How to remove the underline from a selection screen parameter ?

    >
    Anoop Menon wrote:
    > hi Avinash,
    >
    > I am not able to understand the use of the 'comment line properly.
    >
    > The last part of the statement which says modif id is confusing.
    >
    > Please clarify..... I am unable to activate my code when I put the selection screen commebnt statement.
    Use this and update it to your requierement !
    SELECTION-SCREEN begin of line.
    SELECTION-SCREEN COMMENT 1(30) comm.
    PARAMETERS test(1) type c.
      SELECTION-SCREEN end of line.
    INITIALIZATION.
      comm = 'test'.

  • Best way to remove old data from db?

    Hi,
    I am looking some ways to keep my database small and remove old data from database and archive it somewhere else. the data may need to be put back to the database in the future. One of the things I am conserned is how to enforce constraints? In other words, when I remove data, all the related pk/fk data should be removed together. Any suggestions will be greatly appreciated.
    Thanks

    hope this may help u
    concept is : exp/imp & truncate will reclaim the space
    method1
    do an export and secure the dump(say dump1) for future purpose.
    delete the unwanted data.
    commit.
    now again export the tables ( say dump2).
    now do the import(dump2).
    /*now this import will reclaim the the unused space.*/
    method 2
    /* depennded on volume of data */
    -- create backup of existing table for future
    create table backup_table nologging as select * from original_table;
    -- create copy1 of existing table
    create table copy_table nologging as select * from original_table;
    -- truncate the original table, so that highwater mark is reset.
    truncate table original_table;
    -- insert data from copy_table into original table
    insert /*+ APPEND */ into original_table select * copy_table where(ur conditions for data);
    commit all the work.
    /* now u have 3 tables
    backup_table - with all the data - for future reload
    original_table - with unwanted data deleted and space reclaimed.
    copy_table - copy of original table.
    now u drop the copy_table
    drop table copy_table;
    regards

  • What is the best way to remove personal data from the hard drive in preparation for selling my old Mac?

    I am going to sell or perhaps donate my old Power Mac G5.  Is there an easier, yet comprehensive way to remove my data from the hard-drive?  My best approach is dumping anything I do not want found into the trash.
    I am running Mac OS 10.5.8 on the powermac G5

    For better security than the simple Erase (which does not actually over-write the data blocks, only clears the directory), choose Security Options, and Zero all data, one pass.
    After a Zero all data, the only way to recover the data is to dis-assemble the drive in a clean room and use expensive test gear to recover a little of the data. That is good for all but Military Secrets.
    If you really trust no one under any circumstances, remove the drive and beat it to death with a hammer.

  • On my mac, photoshop cc "save as" removes capture date from exif data. How do I prevent this?

    On my mac, photoshop cc "save as" removes capture date from exif data. How do I prevent this?

    You had to reinstall CS6 after cancelling the CC as both were from the same Adobe ID. You can always use & keep both CC & CS6 together.
    Please refer to the blog:
    Can I install both CS6 and CC apps on my computer? « Caveat Lector
    Other references are :
    Creative Cloud Help | Install, update, or uninstall apps
    What is the difference CS6 & CC Versions?
    Regards
    Rajshree

  • How do I remove a shortcut from the Home Screen of...

    How do I remove a shortcut from the Home Screen of a Nokia 700? I'm a bit clumpsy with the touch screen and I keep adding shortcuts for everyrhing. It's easy enough (too easy) to add them, but how can I remove/delete them? There doesn't seem to be any option to deleting them and it's not mentioned in the manual. 
    Solved!
    Go to Solution.

    jimmyireland wrote:
    You tap the icon hold for a second or two the x icon appears then you tap it then it goes
    Now I got it. Thanks for the help.
    I really need to practice this touch screen malarky, I'm not very good at it.

Maybe you are looking for