Removing Notification Type

Hey all,
I have a flex app that when a certain event happens the app will blink in the start bar if the app is minimized. If another event happens before the user activates the window I would like to remove this effect. I use...
stage.nativeWindow.notifyUser(NotificationType.CRITICAL); to start the blinking process...
Anyone know if there is a way to stop it?
Thanks!

Hi ,
Addition to above comments can you please check few things in SPRO related to Priority like .
1. Define Priority Types
2. Define Priorities for Each Priority Type
3. Assign Priority Types to Notification Types
Then the same thing you need to check in 'Overview of Notification type' >> Priority type.
Riyaj

Similar Messages

  • Controlling same Notification Types against few Planner groups

    Dear Experts,
    We have four groups of Maintenance Team (Mec, Ele, Inst & Civ)  which are controlled against four roles to create same Notification types. The control factor is planner group which are linked against their required role and it is working fine to create notification (IW21) for their specific group.
    The problem which we are facing is, change mode of Notification,  Mech planner group team can change the details of Notification in Elec group as
    same Notification types are used by 4 groups. Is there any way to restrict for the change authorization (IW22) in Notification as four teams are following four differernt roles.
    Regards,
    Sahu

    Ajaya,
    Check the values in Authorization Object I_QMEL. (PFCG tcode of the respective Role) See the picture below. Assume this is your role for Civil Notification type (CE). It should look like this.
    Also, try by removing the values in TCD field in other authObjects of this Role.
    One more possibility is
    Some Role other than this specific Role is enabling the user for IW22. This role might have been assigned to all these 3 users. You need to trace this and remove or modify the role.
    This problem is a typical one often seen to be associated with AuthObjects, This can be managed by investigation.
    A last resort method can be to manage this through user-exit QQMA0014. This is possible.
    KJogeswaraRao

  • Default PM Notification type to PM Order type

    HI All,
    Please any one let me know where I need to make setting to obtain the default Notification type from PM Order creation or change mode.
    I have done some analysis i.e. I am able to obtain the default Order type for Notification i.e. when I click on create Order button in Notification creation or change mode (IW21 / 22). The pop-up window appears with default PM order type. To obtain the default value , we need make settings in SPRO i.e. Maintenance and Service Processing > Maintenance and Service Notifications > Notification Creation > Notification Types > Assign Notification Types to Order Types.
    I required vice verse i.e.  Default Notification type from PM Order creation or change mode. To obtain this I have checked any SPRO settings to make. Example: Maintenance and Service Processing > Maintenance and Service Orders > Functions and Settings for Order Types > Define Notification and Order Integration. But here the notification is immediately created, when we save the PM order. This is happening since the automatic creation check box (3 rd column) is checked in SPRO settings i.e. Define Notification and Order Integration.
    I need the system to display the pop-window with default notification type, when I clicked on create Notification button in PM order create or change mode (Iw31/32). Please let me know where I need to make settings for this?
    Regards
    Ramu

    Hi Ramu,
    Goto SPRO ->Maintenance and service processing ->Maintenance and service orders ->Functions and settings for order type ->Define notification and order integration.
    Goto specific order type remove the check box in the third column.
    Result:When ever you create the service order, notification is not created automatically.You have to goto IW32 goto create notification click on the icon then pop-up appears for the notification.Hope this solution resolve your problem.
    Regards
    Suman Kumar

  • Availability Before and After Malfunction - Notification type M2

    Hello everybody
    I want to know why in the notifications type M2 the fields Availability Before Malfunction, Availability after Malfunction and Availability After Completion of Task don't accept as value zero (0), if you has a failure that out of operation the system this value should be zero (0). However SAP version 6.0 don't accept this value.
    Could you help me please.
    Thanks in advance

    Dear Friend,
    this will help you to have a brief report ontechnical objects, if you see iw28 /iw29 report where you can generate report on these parameters.
    for eample if your equipment was available 100 % to production after malfunction and system condition is operational, you can generate what all are the equipments available 100 % to production and which are operational ...like that you can have report for all break down technical objects.
    hope you got an idea.
    Regards,
    pardhu

  • QM01 - Add new fields under SUBJECTS tab for notification type Q2

    Hi Experts,
    My requirement is to add 2 new fields to the create Quality Notification (QM01) Tcode under SUBJECTS tab for Notification type Q2.
    I followed the following steps to achieve this :
    [ SPRO -> Quality Mnanagement -> Quality Notifications -> Overview Quality Notification Types -> Then I selected Q2 and then selected dcreen structure for extended view -> Double clicked on 10\TAB02 ].
    Now I arrived on the screen where we have to define the custom screen area and  screen number.
    But here in this case (Q2 notification type) all the 5 screen areas are already occupied , so where can I add my custom subscreen ??
    Please refer to below screen shot for better understanding :
    Please help ! Thanks in advance.
    Kind Regards,
    Ashish Goyal

    Dear narendra bora 
    You can enter the more than two persons in but not on header screen. In operation you can make each seperate person responsible for each operation & that can be entered against each operation seperately. Also if operation is carried out by two person then also you can enter that in the form of split. 
    But it is not possible to enter two users in reported by field.
    I hope this will resolve your issue.
    Regards

  • Creation and selection of Notification types through Maintenance order

    All,
    When i  create a notification through the order, while giving the notification type in F4 selection, only i could able to see S1,S2 &S3 notification types. Neither i could see the other standard notification types nor the custom notification types configured in the selection. Also we didnt include any notification types in the personal list in selection.
    Can somebody throw ideas about this behaviour ?
    Regards,
    Suresh.

    Hi Riyaj,
    Thanks for your input.
    The custom notification types have been configured for the notification category 01 which is maintenance notification. But the order type through which the notification i am creating is activated with service profile.
    I guess, this could be the reason, if it is, is it any other way to bring the custom notification types as mentioned above ?

  • AppV 5 Remove File Type Association

    Hello,
    Could somebody tell me how I can remove File Type associations in AppV 5?
    I have imported and published an application, but I can't delete the file type associations.
    Thanks!

    You mean from the package itself? Open for Upgrade, go to Shortcuts and FTA's and delete whatever FTA's you want.
    Through the App-V Full Infra, in the console you can export the configuration under Advanced...make a copy of it and delete the FTA's from the XML file...then import and override the configuration but heads up...ensure you have another backup copy...messing
    with the XML can lead to a bad time...
    PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
    rorymon.com Twitter: @Rorymon

  • QM_move stock to block stock through Q2 notification type

    Dear QM Experts,
    u2022 I am creating quality notification type Q2 through QM01
    u2022 After doing necessary defect entry I want to post the defective material to block stock.
    u2022 For this I am using action box transfer posting unrestricted to block.
    u2022 By doing this material can be transferred to block stock of the same storage location
    Requirements,
    u2022 Is it possible to move the material to block stock of another storage location?
    u2022 Whether 311 movement can happen through this action box so as to transfer the material from unrestricted to unrestricted of another storage location?
    u2022 What type of setting needs to be done to achieve this effect?
    Thanks
    Anand Rao

    Hello
    u2022 Is it possible to move the material to block stock of another storage location?
       In notification action box you have the option of transferring the material from unrestricted to  block. In that you have the option inputting the storage location to which you want to transfer
    u2022 Whether 311 movement can happen through this action box so as to transfer the material from unrestricted to unrestricted of another storage location?
    - As said this can be done through a development or other option is that you can choose the same action box( Transfer  unrestricted to block ) and change the movement type to 311. It will allow to move material from  one storage location to another
    another solution is that you can use tak with followupaction as Goods movements. its available in the standard. when u save the notification it will take you to transfer posting but wherein you will have to key in all the details
    u2022 What type of setting needs to be done to achieve this effect?
    Its available in the action setting in the configuration of notification. you will surely require ABAP help

  • Can I see the list of Event's Notification types of Azure Site Recovery ?

    Can I see the list of Event's Notification types of Azure Site Recovery ?
    I want to verify Event's Notifications rather than "Virtual machine health is OK".
    Example senarios:
    senario 1. Disconnect the Ethernet cable.
      Can I get the notification e-mail at Disconnecting the Ethernet cable from the on-premises Hyper-V host ?
    senario 2. Turn off
      Can I get the notification e-mail at Turning off the protected Virtual Machine on the on-premises Hyper-V host ?
    senario 3. e-mail test
      Can I get the notification e-mail after turning on Event Notification ?
      Is e-mail address Collect ?
      Can I get e-mail without auto-Junk ?
    Regards,
    Yoshihiro Kawabata

    Hi Yoshihiro Kawabata,
    Thanks for bringing these requests to our attention. We currently do not have support for these three types of email notifications. I will add them to our backlog and we will enable support for them soon.
    Currently, we support email notifications only for replication issues. One example you can easily test is to Pause the replication of a virtual machine from the Hyper-V Manager UI. This should send an email notification.
    Let me know if this helps.
    Thanks
    Siva

  • Can I copy one Custom Quality Notification TYPE to another TYPE (i.e. ZH to ZC)?

    We need to make nearly identical Quality Notification Types to one we have already created. I've seen how to create one from one of the Standard SAP notification types but its pull-down copy-from only lists SAP ones and there seems to be no provision to enter any of our customized ones.
    It is more trouble than it should be to manually go line by line, screen by screen of the Dialog Structure in SPRO and make the same entries over again especially since we need two new QN Types.

    good desing would be to somehow get the key and then save the attachment based on that, for some reason if thats not possible you can use BDS_BUSINESSDOCUMENT_COPY to copy from your 0000 version to new key
    Raja

  • Transaction CLM1 not allowed for notification type QL

    Hello guys,
    one of our user try to open the transaction CLM1/CLM2/CLM3 he getting error message Transaction CLM1 not allowed for notification type QL
    please any one give solution for this issue.
    find the error screen shot for your reference.
    Thanks
    Surya

    Hello Surya,
    Have you done Basic configuration for Claims processing in SAP Project System.
    SPRO > Project System > Claim > Notification - Claim > Notification creation
    Also check config for Settings for Claims.
    Refer sap help for more details
    SAP Library - Claim Management
    Regards
    Tushar

  • Transaction QM03 not allowed for notification type MQ

    HI Dears,
         The following error is appearing when i want to view my notification created through defects
    Transaction QM03 not allowed for notification type MQ
         How to rectify it ?
    Alagesan

    Hi,
    Check IQS3 transaction also....
    Cheers,
    Tushar

  • Error handling notification type=Platform...

    The message below occurs in our logs in batches of 7 or 8 occurrences over a few ms and separated by a gap of 4-20s. It's been happening for days. The erroring storage node is not the senior node. There is no noticeable service impact. This is a dev cluster consisting of has 8 storage, 4 proxy , 1 MBean server and 4 other process nodes. There is very little load on it. The platform is SunOs 5.10 on x86.
    What does it mean?
    2013-01-31 19:05:36,514 [Logger@9240084 3.7.1.5] DEBUG Coherence 2013-01-31 19:05:36.514/636281.198 Oracle Coherence GE 3.7.1.5 <D5> (thread=Invocation:Management, member=11): Error handling notification type=Platform,Domain=java.lang,subType=GarbageCollector,name=PS Scavenge,nodeId=2

    Hi,
    The log message implies that parallel eden/surivor space collector is running on member with id =2. I don't think it implies any immediate issues but I would recommend to check you heap space graph for the node and also spit gc logs using -Xloggc:<file_location> -verbose:gc and see if the GC is tuned correctly.
    HTH
    Cheers,
    NJ

  • QM01 USer Exit to fill Coordinator Partner field for notification type Q3

    am working on Notification creation Transaction QM01. The requirement is,
    The user selects Notification type "Customer Complaint" & Provides Sales Order Number & Item number.
    In the Reference Objects Tab, User fills Coding , Description , Subject fields.
    Now when the user clicks on Save, I should fill the Coordinator field(To see this field the navigation is, in the menu Goto-> partners ) automatically based on some input criteria.
    So when I Click on Save button before any user exit/BAdi gets called, I am getting the erorr message "Enter the mandatory partner".
    I have cheked a few user exits & none of them gets called after save & before the error popup.
    please give idea about implicit enhacnement ?
    Could you please let me know how to fill Coordinator field automatically?

    Hi ,
    You can check  following user exit.
    QQMA0029
    QQMA0019
    QQMA0025
    Thanks
    Shambhu

  • Where to maintain notification type for txn IW21 in Plant maintanance

    Hi Guys,
                  I like to maintain notification type for txn IW21 in Plant maintanance module. Where can I set this.
    Cheers
    S Kumar

    Hi,
    Here is the path to maintain Notification Types.
    Use Tcode SPRO
    Plant Maintenance & Customer Service -> Maintenance & Service Processing -> Maintenance & Service Notifications -> Notification Creation -> Notification Types -> Define Notification Types
    Then,Click "New Entries" button. Enter the Notification which you need & Save.

Maybe you are looking for