Removing the decimal places of currency field

Hi Gurus,
I have a currency type field ( to be more specific a field like BSEG-WRBTR) .
How do i eliminate the decimal places for this field.
ie if the value is 345678.91, i need to make it 345678.
Is there a standard keyword or something for this?
Points will be given to all the helpful answers.
Thanks,
Nobin.

You can use the FLOOR function to get the largest integer value without decimal.
Like:
DATA: W_RESULT TYPE I.
W_RESULT = FLOOR( P_AMT ).
Regards,
Naimesh Patel

Similar Messages

Change the decimal places of a field in screen table control

HI ,
I have a MENGE field having data element as , BSTMG (decimals 3 ).
This field MENGE , I have used in a table control. The value in this field is filled from a custom Z-table where the same data element BSTMG is used. So , for eq.) value in MENGE field is shown as 6.010
But the requirement is that the value should be displayed as only 2 decemals i.e.) 6.01
I dont want to change the domain of the field in the Z-table , to 2 decimal places , because the table is used in other developments also , so it will give a dump there which I have to correct in other developments also.
So , is there any way to change the decimal places of a field in screen table control , without changing the domain , in the table from where the value is fetched... ????
Edited by: abhijeet_7013 on Feb 14, 2011 3:18 PM

Hi, create a structure in local program with same field names and change the TYPE with some 2 decimal domain of MENGE. Populate this local stucture and use it in TABLE CONTROL.
Hope this helps...
Cheers

HOW to remove the decimal points for particaular field

hi friends,
Iam printing the quntity in decimal mode like 2.000.
but i want to print this as only 2.
How can i remove the the decimal in smart form..
Iam printing amount as 1234.00000.
But i have to print two zeros after decimal point..how can i remove zeros .
appricioate for u r answers..
regards,
sampath kumar

You may use the option
field(.0) for printing the quantity
field(.2) for printing the amount..
Go through SAP help given below..
<b>Number of Decimal Places
A program symbol of one of the data types DEC, QUAN, and FLTP can contain decimal place data. Use the option below to override the Dictionary definition for the number of decimal places for the formatting of this symbol value.
Syntax
&symbol(.N)&
The EKPO-MENGE field contains the value 1234.56. The Dictionary definition specifies 3 decimal places and an output length of 17.
&EKPO-MENGE& -> 1,234.560
&EKPO-MENGE(.1) -> 1,234.6
&EKPO-MENGE&(.4) -> 1,234.5600
&EKPO-MENGE&(.0) -> 1,235</b>

Question about decimal places for currencies

hi ,experts ,
   here is the problem , when i use mb5s, i found the net price has been enlarged 1000 times . I also found the data of the table EKPO has been enlarged 1000 times. So ,i check the decimal places for currencies , i found there are five decimal places , the standard system is two decimal places .
   Does this mean that we cann't change the decimal places in SAP? If we can change , what should we do for configuration ？
Jarod

When running OY04, you are receivingin the following message:
Before you continue, please read the following
text carefully.
If you do not heed this note, you can cause
irreparable damage to the system with this
transacton.
In the R/3 System tables currency fields are
stored as decimal figures with a variable number
of decimal places. The decimal point is not
stored in the field in the database. Instead,
each currency field refers to a currency key
field. In this transaction you assign the number
of decimal places to this currency key uniquely.
Example: If you have set currency USD to have
two decimal places and you post an amount of 100
USD, an amount of 10000 USD is stored in the
Do you want to change the decimal places despite
all recommendations?

Decimal Places in Currencies

Dear gurus,
What is the decimal places in currencied?
how it works in table tcurx.
Regards
R.Rajendran

Hello,
During operation, you must neither delete currencies used nor change their definition of decimal places. Amounts in posted documents could become invalid or incorrect as a result.
You cannot subsequently use R/3 standard functions to make a consistent change to the number of decimal places of a currency in the R/3 system that is already operatively used because the system interprets all amount values on the database according to the number of decimal places of the reference currency that is stored in the system.
Prase

Changing the Decimal places in the currency

Hi all
we are using the currecy SAR. Decimal places was set to 4, now that they want to revert back to 2 decimal places. i understand that by doing so they would be inconsistencies in the data allready recorded. how to avoid that?
is there any programmes / reports that would fix such inconsistencies?
any OSS notes?
thanks and regards
gkk

HI,
You should NOT change the decimal places in a productive system.
If you would do, the correction of the posted documents afterwards would be a remote consulting issue. Which you have to pay for SAP.
You see, all posting you have done until now, would get displayed in a wrong way, and the new posting wouldn't compare to the others.
Please check the note 137626 describes this.
If you really need to change the decimals, you should create a new currency type, for example your current is SAR, and now you should create a SA2. Then you should enter new rations and exchange rates for it, and work with the new one.
Also if you want to set the decimals to two digits from four, youshould not enter an entry in the OY04(TCURX).
In this table you can only enter a value, that discriminate from 2 decimals. If there is no entry in the table, it means the currency has two decimals.
Please assign points if it useful.
Regards
Ravinagh Boni

Decimal places in currencies from flat files

Hi experts,
I am facing a problem in the way BI is managing decimal places when I extract them from tex files. I have read a lot of post and make a lot of changes and the problem persits. Here is my problem. I am uploading data from text files. These files come from 6 different source systems. All developments are already in production so changing the way they send the data it would be the most expensive solution at this point.
For all currencies ratios I receive in the file could contain these 3 kind of values:
5.45
3.2
4
Decimal indicator is "." but it is not always present and sometimes is follow 1 decimal pla or 2, which is ogial to expect depending of the nature of the value. I haven't been able to make it work for all the cases.
I have set "." in RSCUSTV1 as decimal separator. I tried number format "direct entry" in the extraction Tab of data source. I have tried all possible combinations in the tab fields with data type CURR, DEC, even CHAR and Internal or External format, and any configuration I have made works only for some cases and not for the others. I don't know what else I can look at. Your help will be highly appreciated and rewarded with points.
Regards,
Raimundo Alvarez

HI guys and Thanks for your help.
I could solve my problem. There were some issues already fixed (a combination of the external property in the tab fields, the configuration for decimal separator and a problem with the currency). The main one was giving me the headache that I am trying to import a currency but I was not receiving the currency from the source because is always the same (Colombian Pesos). This one has an special configuration in table TCURX that was making the decimal places be wrong. I solved requesting the currency from the source even if it was a constant value.
Thanks for your help,
Rai.

Query regarding decimal places for currencies

Dear all,
SAP standard allows 2 decimal points as default for any condition value. However, based on the entries in TCURX table we can set number of decimal places with reference to specific currencies.
In our system there is no entry in TCURX table against USD currency. Still the system is taking 3 decimal places against the expected 2 decimal places.
Is there somewhere hardcoded this for US or are they any additional settings impacting this? Please help
Regards,
Rajesh

Hi All,
I have been trying to set 3 decimal places. I got the reference to Note # 38881.
This is what I did:
1. Create a new currency US$ and set the decimal places to 3
2. Maintained the prices using VK11.
3. Changed the customers' sales area currency to US$
But when I created the sales order although the system determined the prices in 3 decimals i got the following information message which keeps on showing during the entire sales order creation:
Pricing error: Mandatory condition ZMAC is missing
Message no. V1801
Details are as below:
The obligatory condition ZMAC does not exist. The document is therefore considered to be incomplete from the point of view of pricing.
The cause can be, for example, that a condition record does not exist for condition ZMAC or that a field overflow has occurred when the condition rate was calculated.
Procedure
Check why the condition could not be found. Use the pricing analysis function on the pricing screen to do this. If necessary, add the missing condition manually to the document.
I believe I am missing some configuration that should be done in pricing, not sure what. As this question has been flagged answered, hope someone would be able to help me.
Thanks & Regards,
Rajesh Singh

Changing Decimal Places for Currencies (Table V_TCURX)

The instance is ECC 6.0
We need to change the decimal places for a currency from 0 to 2 decimal places. Is there any impacts of doing that?
Also need to add some currencies which are not in the table. Is there anything need to be careful while doing this. If this table is updated, do we need to update any other tables also which may be impacted?

Hi,
It is not recommended that when postings have already been made, that a change in the currency be done, as amounts posted can become invalid or incorrect as a result (ie USD 100->1.00), which is most critical in production environment Please go through the note 137626 When you made changes via OY04, the effect of which is across all clients.
To change the number of decimal places for a currency already in use, you must convert all the tables in the R/3 System that contain currency fields, so that the data integrity remains. This cannot, however, for both organizational reasons and under the runtime aspect, in a productive system.
You must never change decimal places in a productive system if you have documents posted with this currency. Such a change could lead to inconsistencies in these documents already posted.
In case you really decide to use decimals you may consider to use SAP conversion services for them to convert all documents aready posted as explained in note 434349.
Additional inforamtion:
Note No. 137626 - FAQ: Decimal places for currency codes
                 126857 - Display of amts with correct decimal places in SE16
                   53206 - Processing of currency fields
                     9574 - Currency fields on selection screens
Regards
Ravinagh Boni

How to remove the decimal points at the end of the value????

hi,
we are using crystal reports 9.0. we have some reports which contains group by field. we have one field like address. if we select group by as address "The data is displayed grouped by the Address. But the address is shown in decimal points". for example if we have 55 as address field value, it shows 55.00.
the formula has written like as follows
if lowercase({?GroupBy}) = 'Address' then totext({rsp_GetDevMicro.Address})
now, i want to remove zeros which comes along with address field values.
can anyone help me in this?

Not sure about Crystal 9 but on 11 I would convert it to a number to remove the leading zeroes then back to text again which allows you to remove the decimal point and any thousand seperators, ie:
CStr(ToNumber(),0,"")

The decimal place is wrong in GR55

Dear Expert:
We are using currency JPY
We now creating a new report using report painter, but unfortunately the decimal place is wrong,
the result is only one percentage of the real amount, how can I get this issue solved?
notice that we are using report painter, not ABAP programming, so function module BAPI_CURRENCY_CONV_TO_INTERNAL
is not applicable.

Dear Lu Meng
I was reading your question which seems not answered at all.
I have EXACTLY your same issue.
In ECC using a FAGLFLEXT Report Painter.
My zero decimal currencies such as HUF and JPY are showing in the report, with decimals, thus are factor of 100 too small. Even changing layout deimcals, etc has NO EFFECT.
Did you solve this sissue? OSS has nothing either?
Thanks for any assistance.
Richard

Changing decimal places for currencies

Hi everyone,
I'm a complete begginer to SAP BI and I need to change a value in SPRO > General Settings > Currencies > Set Decimal Places for Currencies, but the option that I want doesn't exist.
I need to add a new entry with the value: currency - EUR6 and decimals 6, but there is no 6 available. Can anyone tell me where can I add this or what is the table where this information is???
Thanks in advance!
Rogério Brá

ok I think it works - just try and play
This is what I did (sort of same scenario - if you get my drift)
Currency Key MGF - translation ratio 1000:1
Exchange rate is : 11:02750 to the Euro
Invoice entered for 1,000,000.00
Currency calculated as 90.68 eur
(ie 1,000,000/(11.02750 * 1000))
You can play aroudn with direct/indirect to ge the factors right
But it works (I thought it did - I am qualified FICO honest!!)
This wont get you around displaying 6 decimals - BUT it will help with currency conversion

Decimal place in Quantity field

Hello experts,
Got a query regarding decimal places in the quantity field of a sales order.
The material UOM is maintained as EA. I have checked the transaction CUNI, where the decimal place is maintained as ZERO. Still , Sales order / Delivery documents which i am creating is allowing decimal places for in the quantity.
For eg: material quantity of 50 EA in sales order, during the delivery batch splitting is getting splitted as 25.095 EA and 24.050 EA. Can you pleae advise the reason for this and how to go about this...
Thanks,
Safeer Rahman

Thanks for your reply....
But , as i have already told the decimal place field is maintained as 0(zero) in CUNI for the UOM EA.... Still its allowing me to enter decimal values... for eg:. its allowing me to enter 50.038 EA. I don't know why its not giving an error message prompting me not to enter decimal values...
Any idea?
Thanks,
Safeer Rahman

Inscrease the decimal Places in Tcode QA32(UD)

Hi Guys,
I want to increases decimal point in Tcode QA32 .
My user requirement is to increases the decimal places from 3 to 4 in Inspection lot stock / to be posted.
We maintain 3 decimal places & I want 5 decimal places at the time of Usage Decision. But I couldn't found the required customizing setting.
Please suggest me....

Hello,
Changing Data Types and Lengths of Existing Fields
If a data element is assigned to the field, you must change the technical field attributes (data type, length, number of decimal places) in the domain of the data element.
Procedure for Fields with Data Elements
Double-click on the name of the data element.
The data element maintenance screen appears.
Double-click on the name of the domain.
The domain maintenance screen appears.
Choose Domain ® Display ® Change.
Make the required changes and save your entries.
Note that this change affects all the table fields that refer to the particular domain. Foreign keys could become inconsistent and conversions required. You should therefore consider the effects of this action before changing the domain by choosing in the maintenance screen of the domain and checking if the domain is used in other tables.
Choose .
The table is activated again and the table field is adjusted to the domain change.
Procedure for Fields with Direct Type Entry
Place the cursor on the field and choose Data element / Direct type.
Values can now be entered in fields Data type, Length, DecPlaces and Short text.
Change the entries for the data type, length and possibly the number of decimal places.
Save your entries.
Choose .
Note that a table conversion will normally be necessary (see Adjusting Database Structures) if you change the field attributes
NOTE: You need to have Access key.
Regards,
Alok Tiwari

How can we remove the following zeros from quantity field ?

Hi All.
how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
eg:getting output zqty = 2.000
but i need           zqty = 2.
help me to reslove this issue.
Regards.
jay

Hi,
While populating the field catlog do the following thing to   avoid zeros.
wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
wa_fieldcat-fieldname = 'FWAER'.
wa_fieldcat-seltext_l = text-023.
wa_fieldcat-no_zero = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Thanks,
Khushbu.

Removing the decimal places of currency field

Similar Messages

Maybe you are looking for