Removing the excel rows automatically using VB script

Hi,
Can anyone please help me in functionality of,  removing the excel rows automatically which are having  value
as ZERO across all columns.

Hi,
Please try the code:
Sub RemoveRows()
Dim i As Long
i = 1
Do While i <= ThisWorkbook.ActiveSheet.Range("A1").CurrentRegion.Rows.Count
If InStr(1, ThisWorkbook.ActiveSheet.Cells(i, 1).Text, "0", vbTextCompare) > 0 Then
ThisWorkbook.ActiveSheet.Cells(i, 1).EntireRow.Delete
Else
i = i + 1
End If
Loop
End Sub
PS：
This is the forum to discuss questions and feedback for Microsoft Excel, if you have further question about VBA code, please post the question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

  • How do I remove the last row in a csv data file

    I would like to remove the last row of data from a csv file that I have saved.  I can identify the start byte of the last row; however, I'm not sure what tool is the best one to remove it.  Should I move the EOF?  Should I open the file up to that point then save over the old one?  Is there another way I don't know about?  I am using labview 7.1.
    Thanks

    I would use the Read Text File.  You can right-click on it and tell it to read lines.  Then Delete From Array.  Leave the index and length unwired and it will delete the last item (I noticed your code is removing the second line).  Then open the file again set to replace or create and write your data.  This method allows you to propagate your errors instead of the Write/Read Spreadsheet File handling the errors for you.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Remove last row of csv_BD.png ‏14 KB

  • Qosmio X - Should I remove the battery during mains use?

    Just a quick question. I'm using the laptop mostly at home so its plugged in via the mains adapter most of the time. Question will this shorten the life of the battery by permanently trying to trickle charge it, or is the internal electronic sophisticated enough to stop trickle charging the battery and hence a slow degradation of the expensive battery?
    I am just wondering if I should remove the battery during mains use if this is the case.

    Hey,
    Its really no problem when you leave the battery installed in notebook even you work the most of time with AC adapter.
    I dont have QosmioX notebook but the most time I also work at home and battery is always installed and AC adapter is connected. No problems at all for years now.
    Furthermore if the battery is charged, the charging will be stopped and battery will not be used anymore. Power will only be used from mains. :)

  • How export report into excel sheet automatically using SSRS 2010?

    Hi,
    I have created many reports using SQL Server Data Tool 2010 and at my work, we are using active batch to ran reports every month.
    Now question is, my boss want me to set up reports such a way that when active batch is ran, reports should be exported into excel sheet automatically with the default values given for parameters at some specific folder location. How can I export report
    into excel sheet automatically when active batch is executed?
    Please help me on this. Thanks for the help in advance.
    Vicky

    Check this:
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          filename                = 'C:/test.xls'
          filetype                = 'ASC'
          write_field_separator   = 'X'
        TABLES
          data_tab                = t_output
    Regards.

  • Help with remove.Instance function removing the wrong row

    Hi there,
    I have been working on Livecycle forms for about two weeks now and have been able to work out quite a bit of what I need to do.  However, I am really hoping someone can help me with a two problems that I cannot seem to solve. 
    The first one is; if I click on the 'remove a row' function on my form and it is the only row, it comes up with an error message,  How do I stop that from being displayed?  I think I need to use the IF function with >1 but cannot seem to get it to work.
    Secondly, if for example I add two rows using the +row button to make three rows and in rows 1&2 I input some data.  If I then want to delete row 3 and press the -Row button it deletes row number 2 and the data in that row and leaves row number 3.  How can I change it so that when I delete a row it deletes row number three and leaves row number 2.  essentially, I need it to delete rows from the bottom up and not from the top down.  Hope this makes sense.  Any help would be greatly appreciated!
    Attached is a link to my form.
    https://copy.com/RiktBtj0uiSA
    Thank you.

    Hi there,
    When removing instances within an object's event which is inside the instance, you must make sure that you remove this particular instance at the end of the event.
    E.g.:
    If you remove the instance of which the button is inside before even finishing the whole event, the program will not recognize what event is to be finished because you have removed the object's which is fired..
    So here you are trying to finish some code which doesn't exist anymore ...
    I suggest you should always remove the instance of (this) object at the end of any event to make sure to finish all your actions before deleting the object.
    Hope this help!

  • Uninstalling addin removes the "Excel" entry in the registry

    I have VSTO addin and on uninstall, in registry HKLM->Wow6432->Software->Microsoft->office->excel->addin, both excel and addin is removed from the registry. Because of this the other addins also get destroyed. How to fix this?
    Registry entries are mentioned below. The properties of everything is "DeleteAtUninstall" is set to false and transitive to true and MyAddin properties are is set to "DeleteAtUninstall" to true. But even then, the "Excel" entry
    only is removed. How to make this work?
    Roopini

    Hi Roopini,
    I guess that you use Click-Once. If that is the case, please ask in ClickOnce and Setup & Deployment Projects forum.
    https://social.msdn.microsoft.com/Forums/windows/en-US/home?forum=winformssetup
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I have a late 2008 Macbook Pro last updated to Mavericks OS.  The screen died and it's not worth replacing.  How do I remove the hard drive and use a drive sled to access info I need?

    I have a late 2008 Macbook Pro last updated to the Mavericks OS.  The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model.  I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need?  What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases.  How can I accomplish this?
    My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive.  Is there a way to just access just my hard drive without interfering with hers?
    I know this is lengthy.  Thanks to whoever looks at this and offers advice/instruction.

    the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
    A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later.  A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
    The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files.

  • How to ungroup the grouped art items using VB Scripting?

    Hi,
    I need to ungroup the grouped items in Illustrator 10 using VB Script.
    Im able to get the count of group items. How to ungroup those items using VB Script.

    @Vimala Lakshmanan – to access tables inside text frames of grouped objects, you need not to ungroup.
    You could use the Group objects and iterate through all page items of the group, single out the text frames and access their Texts object and their Tables object within.
    By starting with a Group object (in the following snippet the group is selected):
    var myGroup = app.selection[0];
    var allPageItemsOfGroup = myGroup.allPageItems;
    for(var n=0;n<allPageItemsOfGroup.length;n++){
        var myObject = allPageItemsOfGroup[n].getElements()[0];
        if(myObject.constructor.name === "TextFrame" && myObject.texts[0].tables.length > 0){
            var myTables = myObject.texts[0].tables;
            for(var t=0;t<myTables.length;t++){
                //Do your stuff here:
                //Just an example line, that fills all cells in a table to "Yellow"
                myTables[t].cells.everyItem().fillColor = "Yellow";
    This snippet also considers nested groups, anchored text frames and nested text frames.
    It does not consider objects in not active states of MultiStateObjects.
    Uwe

  • Unknown column in the excel sheet created using Export to Excel

    Hi,
    I created an excelsheet for the table data using the below link
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/wdjava%20archive/exporting%20context%20data%20into%20excel%20using%20the%20web%20dynpro%
    20Binary%20Cache.pdf
    but problem here is when i open the excel sheet it is having some unknown columns apart from the expected like amount/#agg next to the actual column amount and it is happening only for the cloumns which have some numbers.
    I dont know where these columns are coming from.
    Send me the solution and points will be rewarded for the helpful answers.
    I want to put some name to the excel file instead of using system created file name.for this requirement where do i need to change the code

    Hi,
    You can export to excel even not relating with any libraries
    Follow this way..
    Take one singleDimensional array, arrColNames[], and one Two dimensional array, arrValues[][].
    File f=new File("Sample.xls);
    FileOutputStream fos=new FileOutputStream(f);
    for(int i=0;i<arrColNames.length;i++)
    fos.write(arrLabels<i>.getBytes());
    fos.write("\t".getBytes());
    fos.write("\n".getBytes());
    for(int j=0;j<noOfRows;j++)
    String arr[]=arrValues[j];
    for(int a=0;a<arr.length;a++)
    if(arr[a]!=null)
         fos.write(arr[a].getBytes());
        fos.write("\t".getBytes());
    fos.write("\n".getBytes());
    fos.flush();
    fos.close();
    The exported excelFile will be stored in your server. If you want to open it using FileDownLoad UI Element,
    Create value attributes resource of type Resource, behaviour of type FileDownLoadBehaviour, reso of type String, fileName of type String , Then then append this code
    FileInputStream fis=new FileInputStream(f);
    FileChannel fc=fis.getChannel();
    byte data[]=new byte[(int)fc.size()];
    ByteBuffer bb=ByteBuffer.wrap(data);
    fc.read(bb);
    fis.close();
    IWDCachedWebResource objCachedWebresource=null;
    if(data!=null)
    objCachedWebresource=WDWebResource.getWebResource
    (data,WDWebResourceType.XLS);
    objCachedWebresource.setResourceName(f.getName());
    wdContext.currentContextElement().setFileName(f.getName());
    wdContext.currentContextElement().setResource(objCachedWebresource);
    wdContext.currentContextElement().setReso(objCachedWebresource.getAbsoluteURL());
    wdContext.currentContextElement().setBehaviour(WDFileDownloadBehaviour.ALLOW_SAVE);
    Regards
    LN

  • Getting the selected row (selected using radio button in dataTable)

    I have problem getting the selected row.
    If not mistaken, the way used in BalusC's website sets the value to the backing bean using the valueChangeListener.
    Can I set the value to the DTO instead?
    using something like
    private boolean selected;
    public void setSelectedItem(ValueChangeEvent e){
    this.selected = true;
    }  If i use this way it throws NoSuchMethodException. I have no idea why. I did this for the checkbox and it works fine. I don't know why it doesn't work for radio buttons.

    The DataTable is below :
    <h:panelGrid columns="1" columnClasses="table_align">
              <t:dataTable id="table1" value="#{sysMgrBean.locationList}"
                   var="location" rows="5" styleClass="table" headerClass="tableHeader"
                   rowClasses="tableRowOdd, tableRowEven" width="500">
                   <t:column>
                        <f:facet name="header">
                             <h:outputText styleClass="lbl" value="#{lbl['no']}" />
                        </f:facet>
                        <h:outputText value="#{location.id}" />
                   </t:column>
                   <t:column>
                        <f:facet name="header">
                             <h:outputText styleClass="lbl" value="#{lbl['slct']}" />
                        </f:facet>
                        <h:selectOneRadio  value="#{location.selected}"
                             onfocus="dataTableSelectOneRadio(this);"
                             onclick="enableInput(this.form,this)" valueChangeListener="#{location.setSelectedItem}">
                             <f:selectItem itemValue="" value="true" />
                        </h:selectOneRadio>
                   </t:column>
                   <t:column>
                        <f:facet name="header">
                             <h:outputText styleClass="lbl" value="#{lbl['cd']}" />
                        </f:facet>
                        <h:outputText value="#{location.loccd}" />
                   </t:column>
                   <t:column>
                        <f:facet name="header">
                             <h:outputText styleClass="lbl" value="#{lbl['desc']}" />
                        </f:facet>
                        <h:inputText id="Description" value="#{location.descr}" disabled="#{location.disabled}" />
                   </t:column>
              </t:dataTable>In the DTO :
    private boolean selected;
    public void setSelectedItem(ValueChangeEvent e){
    this.selected = true;
    }

  • How to Select the Current Row When Using af:iterator?

    Hello all,
    I encounter the following problem when using af:iterator to display data from
    a View Object:
    When trying to display the content of a row via a popup, only the first row is
    returned no matter which row is selected. So a selection of the current row
    should exist or some other method which should allow the access to the
    current row.
    The af:table has a selectionListener attribute which permit to achieve this.
    Does anyone know about some similar attribute or some method for
    selecting the current row when the af:iterator is used?
    Thank you,
    Mirela

    I would be interested in the answer to this basic question as well. I cannot get the selected row value of an attribute in an iterator for a view if I simply set-up a attribute binding to the iterator. It seems that this should be possible. I've had no other option but to obtain the current row and the related attributes programmatically. This works fine, but if there is a more elegant option, then I'd certainly like to use it.
              <af:table value="#{bindings.CompaniesView1.collectionModel}"
                            var="row"
                            rows="#{bindings.CompaniesView1.rangeSize}"
                            emptyText="#{bindings.CompaniesView1.viewable ? 'No data to display.' : 'Access Denied.'}"
                            fetchSize="#{bindings.CompaniesView1.rangeSize}"
                            selectedRowKeys="#{bindings.CompaniesView1.collectionModel.selectedRow}"
                            rowBandingInterval="0" id="tCompanies"
                            summary="Companies"
                            width="100%"
                            rowSelection="single"
                            binding="#{CompanyBackingBean.companiesTable}">Page Def:
        <attributeValues IterBinding="CompaniesView1Iterator" id="Id">
          <AttrNames>
            <Item Value="Id"/>
          </AttrNames>
        </attributeValues>I should be able to get the Id attribute value of the current selected row using "#{bindings.Id}", right? Well, it doesn't work for me. Any ideas?
    Thanks

  • How to delete or remove the selected row in a table

    Dear Experts,
    I'm facing a typical requirement in VC, similiar to variable selection screen in BI Queries :
    I will have two tabes and if the user selects data from one table it will be moved to target table.I'm able to populate the target table with the value but I'm not able to delete the selected row from the source table.
    Any help in this regard would be highlt appreciated.
    Thankx in advance.
    Regds,
    Srinivasan.

    Hi
    Follow the following steps -
    1. Create two buttons.One for 'delete row' and another one for 'insert row'.
    2. Assign the proper system action as per the name.
    2. Change the name of both buttons as common name.
    3. To trigger the actions simultaneously add a star before the action.( For Example : *select)
    4. Change the visibility of any one of the button as 'false'. (so it will not get displayed)
    5. Now, if u click the visible button both actions will be triggered simultaneously.
    Regards
    Sandeep

  • Reading the Excel Spread sheet using PL/SQL

    Is there any way how to read a Excel spred sheet using PL/SQL and load in a table.Please help if any one knows about this
    Thanks
    Rama

    http://www.oraxcel.com/

  • Anyway to automate the settings of rpd using any script

    I need a small help like every after installing the BI apps, have to go to admin tool and manually configure the settings. Is there any way to automate the process using any API or scripting language.??
    awaiting for ur reply

    Very odd that you've made a post and then marked is as answered before even receiving an reply ?:|
    Anyway... you've posted in the wrong forum...
    >
    Forum: Community Feedback and Suggestions (Do Not Post Product-Related Questions Here)
    Use this forum for feedback about OTN programs, Web site content, and systems - product-related questions will be deleted.

  • How to delete the unix files automatically using the unix scripts

    Hi
    we have the ADF Project deployed on weblogic server running on top of Linux OS. But, our ADF running project is generating temporary files in weblogic server path below path
    /u01/oracle/product/Middleware/user_projects/domains/based_domain/servers/AdminServer/tmp.
    we are deleting the folders and files existed in TMP directory manually, when size is huge. but, our requirement is to delete the same automatially using the shell scripting based on the time interval say for every 10 hours or 2 days.
    Can anybody please provide us the solution.
    Regards
    Nagaraju Manchala

    Moderator Action:
    @ Nagaraju,
    Your duplicate post of this same exact question,
    that you had placed in the WebLogic Server - Clustering forum,
    has been deleted.
    For future reference, do not ever multi-post. Multi-posting is poor forum etiquette.
    Pick whichever forum you think is most appropriate and place your inquiry.
    You will get a response or you will not get a response.
    There is no obligation, in these free forums populated by end users just like yourself, that a post ever get a response.

Maybe you are looking for