Rename oledb command parameters

Hi
i am updating nearly 200 columns in oledb command.but it is showing param_0,1,2,3, etc i want makes sure those are not mis matched ,can i rename param0 as customer id
Please urgent
thanks in advance
ADKR

For large data loads a much better option would be to capture the data to be modified in a temp location (raw file/table) and then do a batch update using execute sql task in control flow. OLEDB command works on row by row basis and would be really
slow for large data.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Similar Messages

Parameters in a OleDb Command Transformation

Hi there,
In order to prevent lookup errors in a lookup transformation, I've decided to go for an OleDb Command Transformation.
This transformation should check the lookup and, if it turns out to be null, ir returns a dummy value. Otherwise, it would return the lookup value.
This should be done by doing something like this:
select coalesce( (select ID_Table2 from ID_Table2 where FK_Table1 = ?), 0)
suposing Table2 has an atribute called "FK_Table1" that should match a column in the data flow.
Now, such command result in this message:
"An OLE DB record is available. Source "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Syntax eror, permission violation, or other nonspecific error".
But, it I remove the coalesce and type the following command:
select ID_Table2 from ID_Table2 where FK_Table1 = ?
It presents me no errors and allows me to continue.
Did i did anything wrong or is this something that is not possible to be done?
I know i have the option to use a script task to do this operation, but that would turn the maintenance process a little more difficult.
Otherwise, i know i could also re-direct the error from the lookup transformation and handle it. Though, my package has about 10 lookups and that would turn my package a lot more complex than
Thanks in advance
Best Regards
André Santana

Andre,
You have more than one option to return a dummy value if the lookup fails. Here is one:
1. Configure the lookup component error output to 'ignore failure'; the place a derived column after the lookup to replace the nulls in the lookup column by the dummy value
As Phil says, OLE DB command will perform the operation for every row then the performance is worse than using Lookup transform

OLEDB command

hi
i am trying toexecute sp in oledb command,
but i am not seeing anything in dest column
my sp like
execute p_case ?,?,?,?,?
i am assuming there should be 3 des column, also i am getting error like
:Invalid object name #tmp_cal
which i have temp table in my sp

execute p_case ?,?,?,?,? requires input parameters
mapped
Furthermore, it seems the SP has a bug with the temp table.
Not sure how you counted 3
Arthur My Blog

How to Call variable value in OLEDB Command SSIS

Hi ,
I am facing one issue in SSIS OLEDB Command.under OLEDB Command there is sql update query
    UPDATE dbo.ArchiveBBxFbapp
    SET LatestVersion = 0
    WHERE BBxKey = ?
dbo.ArchiveBBxFbapp is the name of the table, which I want to change by dynamically on fly.
table name I am getting from variable .
I want to take same variable value instead of hard coded table name in update statement.
suggest me the correct command
thanks and regards,
Vipin jha
Thankx & regards, Vipin jha MCP

For that you've to first store the query itself inside a variable after setting EvaluateAsExpression as true.
Then use expression as below
"UPDATE dbo." + @[User::TableName] +
"SET LatestVersion = 0
WHERE BBxKey = " + @[User::ColumnValue]
Use option as SQL command from variable for data access mode property
Then map the variable containing query above inside this OLEDB command.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

OLEDB command - all parameter should be bound

i am excuting my sp in OLEDB command
my proc has some required param and some null and 1 output param.
i am executing like
exec p_sp param1=?,param2=? , paramn=? output
i m just passing required filed and output, but when i go to comun mapping
its giving me error : all parameter should be bound and the one i am not passing here its showing up there in column mapping and i dont see output parameter.
any help

see
http://www.rad.pasfu.com/index.php?/archives/24-Output-Parameter-of-Stored-Procedure-In-OLE-DB-Command-SSIS.html
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Multiple Column return in OLEDB Command SSIS 2008

Hi
Can someone help me on this please? I think in case we want to capture return value from a stored proc in SSIS OLEDB Command, we usually write something as
Exec ? = mystoredProc ?, ?, ?, ?
[assuming 4 input parameter and a return value], but I want to capture all the column (5 in my case) of the output row of my stored procedure. So I tried something like,
Exec ?,?,?,?,? = mystoredproc ?, ?, ?, ?
But looks like this is completely wrong. Any suggestion please?
Regards,
Rick
Regards, Avik M.

The syntax should be
EXEC mystoredproc ?, ?, ?, ?, ?, ?, ? OUTPUT, ? OUTPUT,...
Or you can use a table variable in the SP to return multiple valuesin one variable
in this notation
EXEC ? = mystoredproc ? ,? ... remains valid
Arthur
MyBlog
Twitter

Where condition on date column using OleDb Command?

Hi,
How to read date column from excel sheet usign OleDb command. Below code failing .
OleDbCommand cmd = new OleDbCommand("SELECT Column1 FROM [sheet1$] WHERE createdDate < ="+Convert.ToDateTime("3/24/2015")+" ", connection);
OleDbDataReader dr = cmd.ExecuteReader();
Syntax error (missing operator) in query expression 'LastRun < =3/24/2015 12:00:00 AM'.
How to write a where condition on date column excel sheet?
Thanks
PS.Shakeer Hussain

Hi PS.Shakeer Hussain,
In Excel, we store these data in excel is string type. Based on your code, it is dataTime type. So if fails when compare with dataTime and string.
Please try the following code, Useing DateTime.ToOADate Method to convert to the equivalent OLE Automation date. It works fine on my side.
OleDbDataAdapter dbAdapter = new OleDbDataAdapter("select * from [Sheet1$] WHERE createdDate < "+DateTime.Parse("3/29/2015").ToOADate(), connExcel);
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Command Parameters Not Prompted

I've been trying for some time to resolve this issue but can't quite seem to narrow down what is causing the problem. The issue is as follows: Say I have a report with both command parameters and dynamic parameters. When running the report in CR 11 I am usually prompted twice, once for the command parameters and a second time for the dynamic parameters, in two separate windows (empty fields for the command parameters usually show up a second time on the dynamic prompt window). When I run the report in the viewer I am never prompted for the command parameters. Only the dynamic parameter prompt window appears with no parameters values, most likely because they depend on the command parameters. The strange thing is when I have only a command parameter I am prompted for it, the issue arises when both command and dynamic parameters are implemented. I am running CR for Eclipse 2.0 (fairly sure since I have the more recent excel export options). Any help with this issue would be very much appreciated.

I think this may have something to do with a conflict between the date command parameters I use in my report and my dynamic parameters. When I run the report in CR 2011 I am prompted for the date parameters twice, once in the initial command parameters window and again in the field parameters window containing the dynamic parameters. Has anyone else seen this double prompt issue and could it be the root of my viewer problem?

Error when using try catch inside oledb command to run stored procedure

Hi,
i'm using the below command to run some jobs using OLEDB Command
exec sp_start_job @job_name =?
and it runs successfully
when i put this code inside try catch block as below , it generates error and don't accept it
begin try
exec sp_start_job @job_name =?
end try
begin catch
end catch
the error message is "Syntax error, PErmission vaiolation or other nonspecific error"
do you know is there any problem using TRY catch insdie OLEDB command ?
Thanks ,
Ahmed Salah

Hi Ahmed,
According to your description, if an error raised that fails the package, then you want the package to continue execute.
To achieve this requirement, we can use Integration Services (SSIS) Event Handlers that we can create custom event handlers for an OnError event when an error occurs to continue processing rest of the package. For more details, please refer
to the following blog:
http://visakhm.blogspot.in/2013/03/error-handling-in-ssis-loops.html
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to pass relative dates (Yesterday, Last week) via Command Parameters in a linked subreport

I have been struggling with this one and would sure appreciate your help
I have a report that runs fine but takes to long when running, to optimise it have setup it up as a subreport , created a main report which I linked to it via a relative field ({?ServiceID}) field, this has reduced the report time but I would like to go even further by user selecting date e.g startdate, enddate or relative field eg ‘yesterday’, ‘Last Week’
I can do the selectable start and end date fine but I’m failing to make use of the ‘Yesterday’,’ last week’ within the command parameters, below is an example of the code I have on the reports select expert but I want a semiliar filtering on the command parameter to avoid the filtering taking place on crystal but straight from the DB.
IF {?Relative Date}= "Yesterday" THEN currentdate-1
ELSE IF {?Relative Date}="Last Week" THEN LastFullWeek

Good Day Guys,
Apologies for the late response, I have been looking and trying the different suggestion you pointed out, unfortunately without any success
Stored Proc
Nrupal, I tried setting one up but I’m getting a error I cannot seem to get past, below is my condition, any help would be appreciated
where cd1.Service_ID = @Service_ID
and cd1.CallStartDt in (
Case @RelativeDate
When 'Today' then CONVERT (date, getdate())
When 'Yesterday' Then DATEADD(DAY,-1,CONVERT (date, getdate()))
When ‘Last Week’ then between @LastWeekStart and @LastWeekEnd //sytntax before between, also tried using ‘IN’, same result
When ‘Last Month’ then between @LastMonthStart and @LastMonthEnd
else between @CallStart and @CallEnd
END )
End
Crystal command parameter code
where cd1.Service_ID in ({?Service_ID}) and
convert(datetime,cd1.CallStartdt) in (
Case {?RelativeDate}
When 'Yesterday' Then GetDate()-1
else {?CallStart}
END)
Abhilash,
I have tried both your proposed command parameters but still fail
I’m getting an invalid column name ‘Yesterday’ error , I’m not sure if Crytsal takes this type of command formatting using the command parameters, would appreciate your help as I would like to stay clear of the SP, unless it’s the only altanative
Dell
I will start working in your re
Thanks Again

Oracle OLE DB and command Parameters in VB6

Hi,
here's my problem :
When i a VB6 command object ( ado ) this works fine with Oracle client 8i/9i, but with 10g it seems to truncate all my string parameters
Here is my vb code :
Public Function PRC_APPLICATIONSCENARIO _
ByRef p_vConnection As Variant, _
ByVal p_sZlCle As String, _
ByVal p_dDateDeb As Date, _
ByVal p_iDiffdate As Integer, _
ByRef p_sCodeErr As String, _
ByRef p_sErrMsg As String, _
ByRef p_lScenar As Long, _
ByRef p_lSoc As Long _
) As Long
On Error GoTo Err
Dim cmd As ADODB.Command
Dim param As ADODB.Parameter
Set cmd = New ADODB.Command
cmd.ActiveConnection = p_vConnection
Set param = cmd.CreateParameter("iZlCle", adInteger, adParamInput, , CLng(p_sZlCle))
cmd.Parameters.Append param
Set param = cmd.CreateParameter("dDateDeb", adBSTR, adParamInput, , Format(p_dDateDeb, "dd/mm/yyyy"))
cmd.Parameters.Append param
Set param = cmd.CreateParameter("iDiffDate", adInteger, adParamInput, , CLng(p_iDiffdate))
cmd.Parameters.Append param
Set param = cmd.CreateParameter("nCodeErr", adInteger, adParamOutput)
cmd.Parameters.Append param
Set param = cmd.CreateParameter("vErrMsg", adBSTR, adParamOutput, 200, String(200, " "))
cmd.Parameters.Append param
Set param = cmd.CreateParameter("lIdScenar", adInteger, adParamInput, , CLng(p_lScenar))
cmd.Parameters.Append param
Set param = cmd.CreateParameter("lIdSoc", adInteger, adParamInput, , CLng(p_lSoc))
cmd.Parameters.Append param
cmd.CommandText = "{CALL ApplicationScenario" & _
cmd.Execute
this is what i have with 8i ( checking with SQL Monitor ) :
BEGIN ApplicationScenario(:1,:2,:3,:4,:5,:6,:7); END;
:1 = 1
:2 = '01/11/2010'
:3 = 6
:4 = 0
:5 = <NULL>
:6 = 2602
:7 = 1
and this is what i have in 10g :
BEGIN ApplicationScenario(:1,:2,:3,:4,:5,:6,:7); END;
:1 = 1
:2 = '0'
:3 = 6
:4 = 0
:5 = <NULL>
:6 = 2602
:7 = 1
If someone could help me find where i' m wrong, or maybe it's a known bug ?

Hi,
assuming you called the function from a sql select statement (select gf_test from dual;) then the error is as expected, you can't do DML inside a select. Parallel DML is unlikely to be your problem.
I'm a little unclear what you are trying to do with this function though, you could hack it by declaring this an autonomous transaction, but it's unlikely that that is the best way to solve the business problem. If you are trying to find the value of a primary key that is generated from a sequence then the normal way of doing this is to have a before insert trigger that generates the pk for you and then have a pl/sql procedure to do the insert and return the pk to the calling application (which can be powerbuilder or any other language that can call pl/sql.
Niall
Bill Mac wrote:
OK I have managed to get some code to return an error number and this is it:
ORA-14551: cannot perform a DML operation inside a query
Cause: DML operation like insert, update, delete or select-for-update cannot be performed inside a query or under a PDML slave.
Action: Ensure that the offending DML operation is not performed or use an autonomous transaction to perform the DML operation within the query or PDML slave.
The code was:
create or replace function GF_TEST return NUMBER is
retval number;
begin
SET TRANSACTION READ WRITE;
UPDATE parameters
SET last_parent_co = last_parent_co + 1
WHERE (row_no = 1)
RETURNING last_parent_co INTO retval;
COMMIT WORK;
retval := 1001;
return retval;
exception when others then
return sqlcode;
end;
Does that now make any sense to any one? Am I a pdml slave?
Edited by: Bill Mac on 07-Apr-2009 07:38

No value for given parameters error when using command parameters in RDC.

I am trying to create a report using RDC with a parameter in the query, but I keep getting "No value for given parameters" error. Here is the code I use:
Dim creport As CRAXDDRT.Report
Dim appn As CRAXDDRT.Application
Dim datcmd1 As New ADODB.Command
Dim adocn As New ADODB.Connection
Dim sqltext As String
Dim x As CRAXDDRT.ParameterFieldDefinition
Set appn = New CRAXDDRT.Application
Set creport = appn.NewReport
Set x = creport.ParameterFields.Add("test", 2)
x.AddCurrentValue 0
sqltext = "SELECT Name FROM TestTable WHERE ID={?test}"
Set adocn = New ADODB.Connection
adocn.Open "Provider=SQLOLEDB;Data Source=myDB;UID=xxx;PWD=xxx;"
Set datcmd1 = New ADODB.Command
Set datcmd1.ActiveConnection = adocn
datcmd1.CommandText = sqltext
creport.Database.AddADOCommand adocn, datcmd1
creport.SaveAs "test", crDefaultFileFormat
Set datcmd1 = Nothing
Set adocn = Nothing
Set creport = Nothing
Set appn = Nothing

Hello, Paul;
If you add your database connection to the command object and put fields on your report without the parameter, do you get the report you expect?
These are version 8/8.5 samples but the code is the same:
[Note 1|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
[Note 2|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Once you have added the database connection follow that with the parameter code.
[Note 3|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
[Note 4|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
If you add the parameter and put the field on the report, can you pass the value successfully?
Elaine

Receiving FTP commands/parameters in SAP ABAP

Hi Friends
In My program I need to receive acknowledgement from external systems
they will send some parameters thru FTP Commands to SAP
my sap ABAP program need to receive when ever External system sends parameters
and update them in SAP
can anybody know how to handle the FTP commands and receiving them in
SAP ABAP program, it should done automatically
i will be very happy if any one send me some piece of code
Thanks
Anil

I think you will need to watch for the arrival of the file delivered via the FTP, rather than try to act on the FTP commands themselves (as they will be handled by the FTP server software)... for example, if you were to FTP into a subdirectory called "inbox" and then have a cron job or an ABAP program that runs every X minutes to see if the directory contents have changed, you could have an event triggered back job fire up automatically (i.e. using SAPEVT from the operating system, or FM BP_EVENT_RAISE in APAP... see links:
http://help.sap.com/saphelp_sm32/helpdata/en/fa/096e5e543b11d1898e0000e8322d00/frameset.htm
http://help.sap.com/saphelp_40b/helpdata/en/fa/096e6b543b11d1898e0000e8322d00/content.htm
for more on this.
Jonathan

Command parameters in sap shortcut

Hello
we want to launch a transaction within SAP GUI from the Enterprise Portal. The transaction requires a lot of input parameters (the length of those parameters can reach up to 1000 characters). Unfortunately we found that using generated shortcut files as well as the transaction launcher iview we could not transfer more than 200 characters. All additional chars are simply ignored.
Does anyone know of a possibility of launching the SAP GUI and transfering more than 200 characters (i.e. completely filling a dynpro containing several input fields).
Best regards,
Jan Aufdemkamp

Hi Jan,
we've investigated this. It is not only a limitation in SAP GUI, but also the server itself is not able to handle such a long command string. Which server release are you on?
Best regards,
Christian

Unix "rename" Terminal command available in OS X?

Hello,
I have a couple of different cameras/phones that deliver their photos as
DSC00001.jpg
DSC00002.jpg
DSC00003.jpg
etc.
I want to be able to rename these files such that "DSC" is replaced by the camera or phone that took the shot. The "rename" command in Unix (and CMD prompt in XP) do exactly what I need. I just run
rename DSC*.jpg W580i*.jpg and all of file in the folder are renamed.
When I try and run the rename command in a Terminal in OS X, I get this error
mr-mbp:Pix_Xfer MR$ rename
-bash: rename: command not found
Is there a way to enable the rename command in OS X?
I found a nice script called "Replace Text in Item Names" that does what is needed however the command seems so much easier...
THx!
/MR

If I were renaming a single file mv would be perfect, but I need to do many files at once. The practicum is that I have a set of files that have an underscore in the file name. I wrote a perl script that automatically generates LaTeX code to make a book for the pictures. However, the \includegraphics command in LaTeX does not care for underscores in filenames so I want to transliterate the underscores into something more LaTeX friendly, like dashes. With rename it's as simple as this:
rename _ - *.jpg
and all of my images that had underscores in their names are replaced with dashes. mv just isn't practical when I'm looking at hundreds (or more) of images. That's why I was so interested in the build of rename from linux -- I don't care what the source is, I just need the functionality.
Now, the rename.c file does have a shell script at the top that is a very decent substitute:
#!/bin/sh
if [ $# -le 2 ]; then
echo call: rename from to files; exit;
fi
FROM="$1"
TO="$2"
shift
shift
for i in $@; do N=`echo "$i" | sed "s/$FROM/$TO/g"`; mv "$i" "$N"; done
but the compiled C program does fix some potential issues, and it would also satisfy the purist in me that loves having a native compiled rendition of rename around.

Rename oledb command parameters

Similar Messages

Maybe you are looking for