Rename the CC button

Is there some way to rename the CC button in a Skin?
Also how do I add an Advanced Action to have the Closed Caption open throughout the project?
Thanks

For your second question: you can use the system variable cpCmndCC and set its value to 1 on entering the first slide. An advanced action is not necessary, since this system variable is available as simple action in the On Enter dropdown list, Action accordion.
If it seems not to be functional, insert a short first blank slide (0,1sec) that will be invisible to the user, but so CP will have the time to react.
To change the skin, you'll have to plunge into Flash. Or you can delete the CC button on the skin, add a custom button for CC that triggers this action:
Expression cpCmndCC = 1 - cpCmndCC
This will be a toggle button, as I explained in this blog post:
Toggle button
Lilybiri

Similar Messages

Can we rename the Apply button to RUN or GO in BI Publisher 11g?

Hi ,
We have a requirement to rename the Apply button to RUN or GO. ( after selecting the parameters , we have to click the Apply button)
Can this be achieved?
Thanks
Ashish

if you have data in db then you can create xml with needed structure
and so you can create bip report
do you have errors or .... ?

Renaming the Complete button in Workspace ES

Hello,
Is it possible to rename the Complete button to something like "Submit"?
Can any one please advise.
Thanks, Han

Hmmm, I seem to have gotten ahead of myself. I appologize.
For the StartPoint you cannot rename the Complete button (unless you customize and, as I said above, I'm not sure about that).
For tasks, you can initialize the task with route names (Routes and Priority property panel of the user service) and then ensure that you have a route called 'Submit'. If the task goes somewhere then that route can be called 'Submit'. If the task is not routed to another user then you can create a route called 'Submit' that merely goes to a SetValue tasks that does nothing.
That's probably a roundabout way of doing what you want to do but it's the only option I can think of.

Can we remove the Continue button from Quiz Results?

Hi Everyone,
Is there any way to remove the continue button from the Quiz Results page?
I have a captivate file in which there is a Thank you slide at the end after the Quiz results slide. Now, here's the problem - The user is just finishing the quiz and closing the browser tab - which is not showing the completion status inside LMS. The user must need to view the Thank you slide - so that the LMS can respond as "Completed" status.
Now, I want to remove the Continue button on Quizzes result slide so that user doesnot need to go ahead to next slide to complete the course. And i will put the Thank You message here in Quizzes result slide only.
Can I remove the continue button from the Quiz Results page so that it can be the last slide?
Regards
Vikas Sharma

Removing the Continue button from the Quiz Results slide is NOT a good idea in my experience. Clicking the Continue button triggers functions in Captivate to terminate the quiz and commit the score to the LMS. If this button is not clicked, Captivate may not be sure the person has decided they're done with the quiz and wants their score to be captured by the LMS at that point. There are often other buttons on the Quiz Results slide to offer the user the option of Retaking or Reviewing the Quiz. Only the Continue button is designed to take them further beyond the Quiz Result slide.
Like yourself, I have also found learners often fail to grasp the importance of the Continue button and don't realise they need to do something extra (beyond reaching the Quiz Results slide) in order for their score to be captured. So what I usually do is rename the Continue button to something more meaningful such as: Register Your Score, or Record Quiz Results Now. Having a name like this (and making the button nice and large and bold so that it's not easy to miss) clearly tells people that they need to click this button if they want their score to be retained. It's just a simple change, but it practically eliminated all issues we had with people just closing down their browser when they saw the Quiz Results.

Can we conditionally rename the "Submit" as "Next" in web determinations?

Hi,
We are using web determinations for data entry and we have multiple screens for multiple entities. Is it possible to rename the submit buttons in the first and intermediate screens as "Next" and only have the last "Submit" button named/displayed as "Submit".
Thanks!
Antara

The first question here is "what is the +last+ screen".
Generally, the last screen will change depending on what answers have been provided. This is because Web Determinations is clever, and stops asking questions when it knows the answers to all the goals on the summary screen (or it runs out of questions).
You can force a particular last screen to always be displayed if you either:
(a) Define a flow with a mandatory screen at the end of the interview, and use that flow as the goal, or
(b) Have a summary screen goal that depends on a specific piece of data collected on a screen that is last in your screen order.
If you have done one of these, then you can achieve what you want by:
(1) Making the change Jasmine suggests to change the default Submit button text to "Next" AND
(2) Edit the Web Determinations classes/templates/controls/ButtonControl.vm template to conditionally render the "submit" buttonClass with the value of "Submit", when it is being rendered in the context of the final question screen. You could do this for example by checking for #if ( {screen.getId().equals("<screenidgoeshere>"} ).
Davin Fifield

Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: Sy

Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: System Library/Application Support/Adobe. Any ideas? I only have 16 days left on the trial and have been unable to get it to work on my Macbook Pro. This is all I am seeing after Lightroom opens. Thanks!

Thanks to both of you for attempting to help. I finally figured out what was wrong . . . it was a Permissions problem. Very frustrating, but after scouring the troubleshooting tips I finally found the one that solved my problem. I had to add a User and give it Read/Write privileges to Lightroom. The file I had to add the User to was Hidden on my Mac, so that added an even bigger challenge to the mystery. Only a few days left on my trial version! I hope I have time to try it out!

Renaming the Button " Group" in Web UI

Hi Friends,
I want to Rename the Button "Group" to "XXXX XXXXX" in Accounts page.
Component-BP_HEAD_SEARCH
View-MainSearchResult
I have created the Enhancement set and have assigned also to the client.
Then I enhanced the Component BP_HEAD_SEARCH
Then I redefined the method DO_PREPARE_OUTPUT in Class ZL_BP_HEAD_MAINSEARCHRES_IMPL with following Code:-
method DO_PREPARE_OUTPUT.
DATA:
ls_button TYPE crmt_thtmlb_button,
lv_lines TYPE i.
FIELD-SYMBOLS:
<button> TYPE crmt_thtmlb_button.
CALL METHOD super->do_prepare_output
EXPORTING
    iv_first_time = iv_first_time.
DESCRIBE TABLE gt_button LINES lv_lines.
IF lv_lines < 5.
change button-label from "Group" to "xxxx xxxxx"
ls_button-text is the button-label
    READ TABLE gt_button INDEX 3
     ASSIGNING <button>.
    IF sy-subrc = 0.
      <button>-text = 'xxxx xxxxx' .     "#EC NOTEXT
    ENDIF.
    ls_button-enabled = abap_true.
    append ls_button to gt_button.
    endif.
and Saved and Activated.
But when I check the same thing in Web GUI i did not notice any difference. It is still appearing as " Group" .
Is there anything I have missed out?? Also please let me know though it says no syntax error, is there any mistake in my Coding as I am a non Technical guy??? I have a strong feeling there are errors in the Coding...Please guide
Regards
Arup

Try changing this:
READ TABLE gt_button INDEX 3
ASSIGNING <button>.
IF sy-subrc = 0.
<button>-text = 'xxxx xxxxx' . "#EC NOTEXT
ENDIF.
ls_button-enabled = abap_true.
append ls_button to gt_button.
To this:
READ TABLE gt_button INTO ls_button INDEX 3.
IF sy-subrc = 0.
ls_button-text = 'xxxx xxxxx' . "#EC NOTEXT
ENDIF.
ls_button-enabled = abap_true.
modify gt_button from ls_button INDEX 3.
Edited by: urjose on Nov 26, 2008 10:39 AM

How to rename the button "Give FInal Ratings" in appraisal.

Hi,
How to rename the button "Give FInal Ratings" in appraisal. (In Manager Appraisal the manager finally clicks on "Give Final Ratings" button. I want to rename this button.)
I tried through personalization but could not locate the button name in the personalization structure , so that I can rename it.
regards
Edited by: Maya on Nov 24, 2012 11:23 PM

Hi Maya,
In personalization, find the item with simiilar word pattern . For Example : "%Final%Rating" or something like this.
You will get the item as well as block name.
As per my understanding , If you want to change the button label , then set the property : LABEL for that item.
Apply and Save the personalization.
Switch over responsibility and retest the case.
HTH
Sanjay

Renaming the buttons on the Search Request Screen in PC-UI

Dear Gurus,
How do I rename the "Filter On", "Filter Off" and "Personalize" text that appears on the Search Request Screen in PC-UI. Also, If I want take out the help link in the Search Request screen how do I do that.
Thanks!
Vivek.

This is rendered in the PC-UI framework. There is no customizing present for this.
If you want takeout the links search for them in the corresponding view's of the framework BSP <b>CRM_BSP_FRAME</b>
Raj

Can I use the "same" button multiple times for multiple galleries?

OK so I am extremely untrained in CS4 and Actionscript. However I have managed to get along fairly well until I started to dynamically upload images as a gallery. This works great if I have one gallery, but for my site I have 9 galleries!!! I have a back and next button, but I want to be able to use those same buttons for all of the galleries so they look the same. I have split them up and renamed them, but I am clueless on how to script the buttons to work. Please help...and don't laugh at my poor scripting. This is what I have now because I do not know where to put the other button names without getting errors.
stop();
next_btn .addEventListener(MouseEvent.CLICK, nextImage);
var imageNumber: Number=1;
function checkNumber(): void{
    next_btn.visible=true;
    back_btn.visible=true;
    if(imageNumber==15){
        trace(imageNumber);
    next_btn.visible=false;
    if(imageNumber==1){
        trace(imageNumber);
    back_btn.visible=false;
function nextImage(evtObj:MouseEvent):void {
    imageNumber++;
    mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
    mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
    mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
    mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
    mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
    mc_animals.source= "design/animals/an"+imageNumber+".png";
    mc_icons.source= "design/icons/icon0"+imageNumber+".png";
    mc_objects.source= "design/objects/pc"+imageNumber+".png";
    mc_typography.source= "design/typography/type"+imageNumber+".png";
    checkNumber();
back_btn .addEventListener(MouseEvent.CLICK, backImage);
function backImage(evtObj:MouseEvent):void {
    imageNumber--;
    mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
    mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
    mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
    mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
    mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
    mc_animals.source= "design/animals/an"+imageNumber+".png";
    mc_icons.source= "design/icons/icon0"+imageNumber+".png";
    mc_objects.source= "design/objects/pc"+imageNumber+".png";
    mc_typography.source= "design/typography/type"+imageNumber+".png";
    checkNumber();

I'm still a novice with Flash myself, but I have two comments.
First, at this point, won't your buttons control all galleries at the same time? Which means, if I go to image 5 in one gallery, then move to another gallery, I'll start at image 5, because the actions are all connected.
Second, you can definitely use the same buttons for multiple galleries. It seems to me that as long as you've assigned the buttons an instance name, these actions should already work to control all the galleries (see the note above). I guess I would need to understand a bit more about how your project is built.

The share button disappeared from my Facebook add-on just before I upgraded to Firefox 5.0. I thought by upgrading and reinstalling the add-on it might come back, but it didn't. All other FB buttons are there, near as I can tell. Any ideas? I'm using XP3.

The share button disappeared from my Facebook add-on just before I upgraded to Firefox 5.0. I thought that maybe by upgrading and reinstalling the add-on it might come back, but it didn't. All the other FB buttons are there, near as I can tell. Any ideas? I'm still using XP3.

Hello,
I had the same problem with finding this file.
There's no such file in Mac OS X version of Skype. But there's a directory for your Skype user account in /Users/%current_user_name%/Library/Application Support/Skype/
try:
quitting Skype
renaming old folder
signing into the Skype

After saving a file using Excel 2010 in the My Documents folder, it cannot be found using the open button in Excel 2010

When certain files are saved using Excel 2010 to the My Documents folder, they cannot be found by using the Open button within Excel 2010. But the file is always found using My Computer and following the path to My Documents. What is
even odder is that if I do a "Save As" within Excel and rename the file to the same name but with a "!" at the beginning of the name, it will then show up in the Excel Open window. There doesn't seem to be a distinct pattern as to
when the file can or cannot be displayed by the Excel Open button.
I am using Windows 7 64bit along with Office 2010 64bit. Windows has current service packs and updates. There are perhaps 200 - 400 Excel files in the My documents folder. Some of them are .XLS and some are .XLSX.
William Fearn

Hi,
Do you mean that you can't find the Excel file when you click Excel->Open->My Documents folder?
Do you use the other folder path to test?
Dose the issue occur in other Office suits (Word, Power Point)?
Do you get some error message, like "Windows cannot find 'FilePath\FileName', Make sure you typed the name correctly, and then try again."?
Please try the following methods:
Method1:
1. Go to the registry. Click START, and in the RUN command line type REGEDIT and hit ENTER or click OK.
2. Navigate to the following key: HKEY_CLASSES_ROOT\Excel.Sheet.8\Shell\Open\Command
3. Double click on the (Default) instance over to the right. Right now this probably says something like:
C:\Program Files\Microsoft Office\Office14\EXCEL.EXE /dde
Change this value to:
C:\Program Files\Microsoft Office\Office14\EXCEL.EXE /e "%1"
4. Navigate to the following key: HKEY_CLASSES_ROOT\Excel.Sheet.12\Shell\Open\Command
Again, double click the (Default) entry to the right and change
C:\Program Files\Microsoft Office\Office14\EXCEL.EXE /dde
to
C:\Program Files\Microsoft Office\Office14\EXCEL.EXE /e "%1"
Note : Please backup the registry key before you modify.
Method2:
Click the File tab, and then click Options.
Click Advanced, scroll down to the General
section, and then clear the Ignore other applications that use Dynamic Data Exchange (DDE) check box in the
General area.
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

The text "Remove" is not appearing in the remove button of Bookmarks.

Hi,
The text "Remove" is not appearing in the remove button of Bookmarks. My problem is the same as mentioned in this question.
https://support.mozilla.org/en-US/questions/1017302
The solutions suggested on the link don't seem to work. How do I resolve this? For me this problem is persisting everyday.
Thanks

You already tested in Firefox's Safe Mode and that did not make any difference?
Can you associate this problem with any software changes, such as upgrading from Firefox 31 to Firefox 32, or updating an add-on, or Windows, etc.?
Have you noticed problems with any other dialogs or menus?
Occasionally a corrupted settings file may cause issues with dialogs. This file also stores toolbar customizations. You can rename the file and customize from scratch.
Open your current Firefox settings (AKA Firefox profile) folder using either
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button
Leaving that window open, switch back to Firefox and Exit, either:
* "3-bar" menu button > "power" button
* (menu bar) File > Exit
Pause while Firefox finishes its cleanup, then rename '''localstore.rdf''' to something like localstore.old
Start Firefox back up again. Any improvement in the Edit Bookmarks dialog?

Photos have a ? in the top left hand corner. When I click to reconnect files are found but the reconnect button is not active

Mostr f my photos have a question mark in the top left hand corner. When I go to <file> and click on reconnect the missing files are searched for and found but the reconnect button is not active. What can I do. I m unable to edit these photos.

jeglee
What version of Premiere Elements are you using and on what computer operating system is it running?
It sounds like you are in the Elements Organizer that came with your version of Premiere Elements.
That ? in the top left corner of the thumbnail indicates a file that is no longer in the hard drive save location as it was
when a copy of the file was included in the Elements Organizer.
1. Do you know that the file(s) still exist? Could you have moved, deleted, or renamed file/folder involved? Can you go
to the hard drive save location for the file and actually find it there?
If you are working with Photoshop Elements instead of Premiere Elements, you have posted in the wrong forum. In that case, please post your thread in the Adobe Photoshop Elements Forum or wait for a moderator to see your thread here and move it from here to there.
Photoshop Elements
If not, we will continue our exchanges of information here in order to resolve your issue.
Thank you.
ATR

SID Showing instead of friendly name after renaming the server

I had to rename a windows 2012 R2 server and after I rename it, Sever is showing SID instead of user friendly name.
Even when I try to add new domain group or user in any resourse of this server, the friendly name disappear, soon after I hit apply button.
So far I have done the following
disjoin/rejoin - same result
disjoin >delete AD account > Rejoin - same result
I confirm that I have see the new server name in AD. DNS is OK too. Could find anything (i think) related to this problem.
I can see the following errors
1. The server {9BA05972-F6A8-11CF-A442-00A0C90A8F39} did not register with DCOM within the required timeout. EVENT ID 10010
2. The processing of Group Policy failed. Windows could not determine if
the user and computer accounts are in the same forest. Ensure the user
domain name matches the name of a trusted domain that resides in the
same forest as the computer account. . Event ID 1110
3. Netloon server could not add the autZ RPC interface. The service
was terminated. the following error occured. " Not enough sesources are
available to compete this operation Event id 5820
4. The UAC file Virtulatization service failed to start due to the
following error: This driver has been blocked from loading.Event ID 7000
I have not deleted the computer account in the second time. Then
rejoin but this time i didn't get the message but the issue with SID
showing instead of friendly name is still there. These are related , i
can see
I can see the server in the domain and DNS also updated.
When I run GPReuslt, it shows
Data collected on: 20/03/2014 3:17:09 PM
Summary
During last computer policy refresh on
20/03/2014 3:00:29 PM
<v:group alt="Error" class="vmlimage"
coordsize="100,100"
style="width:15px;height:15px;vertical-align:middle;"><v:oval
class="vmlimage" coordsize="21600,21600" fillcolor="red"
strokecolor="red"
style="width:100px;height:100px;"></v:oval><v:line
class="vmlimage" from="25,25" strokecolor="white" strokeweight="2.25pt"
style="" to="75,75"></v:line><v:line
class="vmlimage" from="75,25" strokecolor="white" strokeweight="2.25pt"
style="" to="25,75"></v:line></v:group>
1
Errors Detected
<v:group alt="Warning" class="vmlimage"
coordsize="100,100"
style="width:15px;height:15px;vertical-align:middle;"><v:shape
class="vmlimage" coordsize="100,100" fillcolor="yellow"
path=" m50,0 l0,99,99,99 xe" strokecolor="yellow"
style="width:100px;height:100px;"><v:path></v:path></v:shape><v:rect
class="vmlimage" coordsize="21600,21600" fillcolor="black"
strokecolor="black"
style="width:10px;height:35px;"></v:rect><v:rect
class="vmlimage" coordsize="21600,21600" fillcolor="black"
strokecolor="black"
style="width:10px;height:5px;"></v:rect></v:group>
A fast link was detected More information...
<v:group alt="Warning" class="vmlimage"
coordsize="100,100"
style="width:15px;height:15px;vertical-align:middle;"><v:shape
class="vmlimage" coordsize="100,100" fillcolor="yellow"
path=" m50,0 l0,99,99,99 xe" strokecolor="yellow"
style="width:100px;height:100px;"><v:path></v:path></v:shape><v:rect
class="vmlimage" coordsize="21600,21600" fillcolor="black"
strokecolor="black"
style="width:10px;height:35px;"></v:rect><v:rect
class="vmlimage" coordsize="21600,21600" fillcolor="black"
strokecolor="black"
style="width:10px;height:5px;"></v:rect></v:group>
The following GPOs have special alerts
GPO
Name
Alert
Default Policy
AD / SYSVOL Version
Mismatch
During last user policy refresh on
20/03/2014 3:00:29 PM
<v:group alt="Error" class="vmlimage"
coordsize="100,100"
style="width:15px;height:15px;vertical-align:middle;"><v:oval
class="vmlimage" coordsize="21600,21600" fillcolor="red"
strokecolor="red"
style="width:100px;height:100px;"></v:oval><v:line
class="vmlimage" from="25,25" strokecolor="white" strokeweight="2.25pt"
style="" to="75,75"></v:line><v:line
class="vmlimage" from="75,25" strokecolor="white" strokeweight="2.25pt"
style="" to="25,75"></v:line></v:group>
1
Errors Detected
<v:group alt="Warning" class="vmlimage"
coordsize="100,100"
style="width:15px;height:15px;vertical-align:middle;"><v:shape
class="vmlimage" coordsize="100,100" fillcolor="yellow"
path=" m50,0 l0,99,99,99 xe" strokecolor="yellow"
style="width:100px;height:100px;"><v:path></v:path></v:shape><v:rect
class="vmlimage" coordsize="21600,21600" fillcolor="black"
strokecolor="black"
style="width:10px;height:35px;"></v:rect><v:rect
class="vmlimage" coordsize="21600,21600" fillcolor="black"
strokecolor="black"
style="width:10px;height:5px;"></v:rect></v:group>
A fast link was detected More information...
Please help
I feel like, something is blocking the user-friendly name to display in that server. I could be wrong.
I have also noticed that Netlogon service is not running. Try to run, it gives error Error 1721: Not enough resources are available to complete this operation.
please help.

Hi,
Would you please tell us that are all user names displayed as SIDs, or only some of them after you renamed the server?
Here are some related links below I suggest you refer to:
Event ID 1110 — Group Policy Preprocessing (Active Directory)
http://technet.microsoft.com/en-us/library/cc727342(v=WS.10).aspx
Error Message:
http://technet.microsoft.com/en-us/library/cc940521.aspx
"AD / SYSVOL version mismatch" message is displayed unexpectedly in the Group Policy Results report in Windows
http://support.microsoft.com/kb/2866345
Best Regards,
Amy Wang

Rename the CC button

Similar Messages

Maybe you are looking for