Render Markers to Files OR Create Sequences From Markers

This may have been asked before, but here goes (and yes, I did a search...extensively here and google):
Is there a way to set markers within a long sequence containing begin and end times. Either automatically create multiple sequences or video files with the same name as the marker.
I need to do this because I shoot long form Church services (1.25 hours) and need to output the Worship team performances separate from the sermon prior to upload. Currently, I have to duplicate the long video 6-7 times and set the in/out times to correspond to the markers. Then rename the sequences as the markers and then import them all to Media Encoder.
Vegasaur (a plugin for Sony Vegas) has this functionality. Much quicker and easier.
Thanks.
Wally

No, I'm afraid you can't do that trick from the iPad's Safari. What I do is take a snapshot of the screen when I want to keep a record. Press the Home and Lock buttons simultaneously real quick. You should hear a click and see the screen flash blank for a second. A snapshot of the screen will then be saved to your Saved Photos album. It's almost the same as having a PDF file of the page.
Oh, and welcome to Apple Discussions!

Similar Messages

CREATE SEQUENCE from a stored procedure

Hello,
Is it possible, to create a sequence object from an own written stored procedure? Can I reinitialize the actual value of a sequence object without recreating it from a stored procedure?
Thank you for recommendations,
Matthias Schoelzel
EDV Studio ALINA GmbH
Bad Oeynhausen

maybe this example might be of some help.
SQL> create or replace procedure dy_sequence (pSeqName varchar2,
2                                           pStart number,
3                                           pIncrement number) as
4    vCnt     number := 0;
5 begin
6    select count(*) into vCnt
7      from all_sequences
8     where sequence_name = upper(pSeqName);
9
10    if vCnt = 0 then
11      execute immediate 'create sequence '||pSeqName||
12                        ' start with '||to_char(pStart)||
13                        ' increment by '||to_char(pIncrement);
14    else
15      execute immediate 'alter sequence '||pSeqName||' increment by '||to_char(pIncrement);
16    end if;
17 end;
18 /
Procedure created.
SQL> -- create the sequence by calling the dy_sequence procedure
SQL> execute dy_sequence ('test_sequence',1,1);
PL/SQL procedure successfully completed.
SQL> select test_sequence.nextval from dual;
   NEXTVAL
         1
SQL> -- alter the sequence to increment by 2
SQL> execute dy_sequence ('test_sequence',0,2);
PL/SQL procedure successfully completed.
SQL> select test_sequence.nextval from dual;
   NEXTVAL
         3
SQL>

Xm create doesn't create required files, when creating vm from ISO file

Greetings,
I've created a virtual machine, but it won't start (blocked).
img file:
/srv/OL-DB2-PRI/OL-DB2-PRI.img
config file:
import os, re
arch = os.uname() [4]
kernel = "hvmloader"
builder='hvm'
memory = 10240
name = "OL-DB2-PRI"
cpus = "" # leave to Xen to pick
vcpus = 4
disk = [ 'file:/srv/OL-DB2-PRI/OL-DB2-PRI.img,xvda,w', 'file:/media/usb/extraISOs/OL6_64_1.iso,xvdc:cdrom,r' ]
vfb = [ 'vnc=1,vnclisten=0.0.0.0,vncdisplay=1,vncpasswd=Welkom_01' ]
root = "/dev/hda1 ro"
extra = "4"
on_poweroff = 'destroy'
on_reboot = 'restart'
on_crash = 'restart'
boot="dc"
xm list :
[root@OVS-PRI xen]# xm list
Name ID Mem VCPUs State Time(s)
Domain-0 0 832 8 r----- 547.4
OL-DB2-PRI 7 10240 4 -b---- 6.8
The log shows, xen is trying to watch files or directories that don't exsist:
xs_read(/local/domain/0/device-model/7/xen_extended_power_mgmt): read error
xs_read(/local/domain/7/log-throttling): read error
Am I using odd parameters in my config file?
The ISO file is downloaded straight from Oracle site. Which I also used to install OL6 directly.
Where else could I check?
I've created the directories manualy, but have no idea, what the files should contain.
I prefer not to use OVM Manager. To much dependancies.
Any help is appreciated.

complete qemu-dm log file:
domid: 12
Using xvda for guest's hda
Using file /dev/sda4 in read-write mode
Using xvdc for guest's hdc
Using file /media/usb/extraISOs/OL6_64_1.iso in read-only mode
Watching /local/domain/0/device-model/12/logdirty/cmd
Watching /local/domain/0/device-model/12/command
Watching /local/domain/12/cpu
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = e9775a95-847d-7256-798e-68a2678be160
Time offset set 0
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/12/xen_extended_power_mgmt): read error
Using xvdc for guest's hdc
medium change watch on `xvdc' (index: 1): /media/usb/extraISOs/OL6_64_1.iso
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
xs_read(/local/domain/12/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/12/log-throttling'
medium change watch on `/local/domain/12/log-throttling' - unknown device, ignored
char device redirected to /dev/pts/2
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
cirrus vga map change while on lfb mode
mapping vram to f0000000 - f0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
Unknown PV product 3 loaded in guest
PV driver build 1

Equivalent for Create Sequence from clip in Extendscript

Hi,
     Please help me to create a sequence from a clip using Extendscript.(through jsx coding).
     I want to create a sequence from a clip in same way as a sequence is made through GUI when we click on "New Sequence from clip".
     This is very urgent please help..
Thanks and Regards,
Anoop NR

But before I grant this privilege, it was able to create the sequence from sql command only its like
CREATE SEQUENCE seq_name START WITH 1 INCREMENT BY 1 NOCACHE NOCYCLE;
Is the privilege specially required to be granted when used from stored procedure?

Create sequence from Data Modeler?

Hi,
I started using SQL Developer Data Modeler to model my first APEX application, but there are one thing I don't understand.
From the logical model, I can create all my application model, but I don't find anywhere I can define thath my PK must be populated from a squence.
From APEX is a step in the wizard, creating the sequence and trigger, but If I model from Data Modeler, then, I "loose" this important feature common to mostly all my table objects.
There are something I'm missing?
Regards.

Philip Stoyanov wrote:
You can set surrogate key to be generated for entity during engineering to relational model - in DM 3.3 available here http://www.oracle.com/technetwork/developer-tools/datamodeler/downloads/datamodeler-33-ea-1869055.html
PhilipHi again,
Sorry sir, but I downloaded 3.3 and can't find what you point in your last message.
Regards.

Create Sequence from Bin and retain sort order

I am trying to create new sequences by dragging a bin to the "new item" folder icon in the bottom right. It does create a sequence that matches the settings of the clips in the bin, but they are in a completely random order. The bin itself is sorted by name. If I select all of the clips in a bin and drag it to create a bin, they are sorted properly, but it is slowing down my workflow. Any thoughts? Does Premiere CC work this way for anyone else?

Not sure what to suggest except..
Posters often talk about wanting a faster workflow...
but it is slowing down my workflow.
FWIW
Maybe 1 minute invested in creating a New Sequence Preset (Custom) for now and future use..
Click On Bin - 1 sec
Ctrl-A ( Select all) - 1 sec
Drag to the Sequence - 2 secs
Cant think of a faster way to speed up your workflow apart from that.
[Text formatting corrected.]
Message was edited by: Jim Simon

Can't create PDF from Word file

I may be missing some functionality or that functionality may not exist.
I'm running Acrobat Pro 9.2 and MS Word 2004 (11.5) on OSX Leopard 10.5.8. I want to create a PDF from a Word file but NOT using the Print dialog. I want to either create it in Acrobat using File > Create PDF > From File or create it from within Word using the Acrobat menu/toolbar. This is so that it will end up as a tagged PDF.
However, I don't have an Acrobat menu or toolbar in Word. I thought Acrobat was supposed to have installed these into MS Office when I installed Acrobat. And when within Acrobat if I select File > Create PDF > From File and choose a Word file, I get a message "Acrobat could not open 'filename.doc' because it is either not a supported file type or because the file has been damaged". This happens for all Word files.
Looking in Acrobat > About Adobe Plug-Ins... under Convert2AdobePDF it says 'Loaded: no'.
Are these two methods of converting Word files to PDFs something that can only be done in the Windows version of Acrobat? Or is there a plug-in or update I can download to install this missing functionality?
Thanks for your help,
Mark

Keep your Office2004. But Office 2008 does have a way to create PDF's from within the word and excel Programs.
It works better than through the AdobePDF Printer, or through the Apple Print menus save as PDF. (Unless you have X.6.x Snow leopard)
One thing it gets around is a long standing Problem Acrobat has had with word and excel since Word 6.0.1.a/Excel 5.0.1a. Acrobat doesn't know how to interpert Word Page section Breaks. Chopping up a word/excel document in to multiple PDFs that have to be merged back together. MS came up with their own PDF Converter that gets around that problem.

Create application from spreadsheet failing - APEX 3.0

Create Application from Spreadsheet failing (wrong column order) on the upload
example csv columns are nameA, nameB, nameC
Upload as csv
The column order of the csv file changes....(its random).
example csv is nameC, nameB, nameA -.but sometimes it works after numerous tries uploading it (column order is correct - same as csv file)
I have another apex/db (10.1.0.4.2) installation(same version 3.0) where it works all the time(same csv file)
The database for the failing Apex installation is (10.2.0.1.0)
ANY IDEA???...could be a a database caching issue or a wrong db parameter?

What table gets populated when you upload a csv file via create application from spreadsheet (is it only APEX_APPLICATION_FILES)? Because if i import the csv file in the repository it looks file when i download it. I not sure what controls the order of the csv file column order upon the upload create application from spreadsheet process. This is a very perplexing problem since it works on another apex 3.0/10.1 database environment.
thanks

Create Sequences on one computer and render out from another

Essentially what i'm trying to acheive is to use Premiere Pro (CS6) on my Mac to create sequences themselves but use a PC on the network to do the rendering work overnight.
I create a number sequences, anywhere from a few minutes each that can be combined into hour plus long final videos.
Is there a way to "package" a project onto a network drive where the PC can then see the project itself with the relevant source media?. I can move the project file and the source media singularly but I then need to manually relocate the media each time.
The workflow would then be
All source media originally loaded onto Mac
Sequences within project made on the Mac
When ready for rendering transfer to PC
PC does work with Media Encoder, freeing up Mac for other tasks.
Any help or suggestions would be most welcome!
Thanks guys

You will first have to have a consistent folder naming setup for both computers, so PPro may find the files
You will need to have the project and all files in one place on the server, and then copy everything to the appropriate computer for work... PPro does NOT work on a network, only on a local hard drive
So... edit on Mac, copy all to server... copy all to PC... render on PC... copy all back to server
Some reading about networks...
Win Server is NOT supported http://forums.adobe.com/thread/851602
Not in a Network environment http://forums.adobe.com/thread/771151
-a work around, of sorts http://forums.adobe.com/thread/957523
-and not on a "domain" http://forums.adobe.com/thread/858977

How to setup Compressor to create video from multiple sequences within FCP?

I am wondering how I can set compressor up to create videos from multiple sequences within FCP. When I click file -> export - > compressor for a sequence and go into the program, it doesn't allow me to go back into FCP. I just get a spinning beach ball. Is there no way to set it up so I can prep a bunch of fcp sequences within compressor and then click submit and walk away? I have over 100 sequences that need to be exported so it would be a little difficult to do this one at a time. Thanks.

Batch processing
*Step one. Make sure everything in every sequence is rendered.*
*Step two. Make a folder somewhere and name it something relevant.*
*Step three. In FCP select all you sequences that you want to compress and right click (option), choose Batch Export from the contextual menu.*
*Step three point one. In the batch export window click on settings and choose the folder you made in step two for the destination. Make sure Make Self-Contained is not check and include Audio and Video.*
*Step four. Click export in the batch window.*
Once that is done you can close FCP.
Now in Compressor
*Step five. Make a setting that will give you the output that you want (mpeg2, AC3, h.264, whatever). Make a destination for where you want to save the output.*
*Step six. Make a droplet from the settings you made in step five.*
You can quit Compressor now.
*Step seven. Take the files that you batch exported from FCP in step three and four and drop them on the droplet you made in step six.*
o| TOnyTOny |o

Brilliant way to create titles from text files

It was just pointed out to me by a fellow named Greg Hester that there is a way to create titles from a Microsoft Word file using Adobe InDesign. You can create as many titles as you need, and even change text positions around from title to title. Then you export as a PNG.
If you need to go back and change a color or a font type or size or whatever, you can do that to all of them at once and then just export again. They will automatically update in Premiere Pro.
I have never even opened InDesign before, and I was able to follow the instructions in this tutorial without a strain.
The tutorial doesn't show that you can import a frame capture from the video to help position the text, but you can.
This is very cool. If you subscribe to the Creative Cloud, then you have access to InDesign.

Best would be to have this template/style functionality in the title tool itself though
Agreed.
Remember, all this InDesign thing does is create images that can be used as titles. My Macro created actual titles.
What really needs to happen is to have a plugin that creates titles from simple text files like the ones created from Notepad, so no Microsoft program is required. The file could have the text, the font style, and many other parameters, and then it could have the time to place the title on the sequence.
But in the meantime, this InDesign thing seems to be the best we can do for now. If, however, you want to use a fancy font style and it will all be in English, you can use my macro.

Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH

Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH. I'm not new at this. I re-installed FCP successfully. I trashed the preferences. Please help.

Do you have any filters applied to your clips?
This happened to me before, I accidently had applied a broadcast safe filter to a color matte that was black....
I figured it out by duplicating my sequence and deleting items from my timeline 1 by 1 until I was able to export a reference movie.
Anywho, export again, this time with "self contained" movie selected.
Then try to import to Compressor.

Cannot create iView from PAR file

I am trying to create an iView from PAR file. But when I select the option,
"Portal component - create an iView from a portal component contained in a deployed portal archive (PAR) file"
and click next, I get the following error.
Error______________________________________
Step 1: Portal Archive Selection
No templates to display. You are not assigned to any existing templates.
I have portal_configurator and developer roles assignmed to myself. Which other role do I need? I cannot get admin role.
Note: Other users with admin roles can create iViews.

Hi
What is your portal version details ?
In EP 7.0 you do not have the option -- New From PAR.
So to create IView from Par, you should select the option New --> IView and then there will be an option to select par file.
Otherwise
1.Check if your par file is deployed on server.
2. Check the portalapp.xml, if you have configured your components properly.
Cheers
Chinmaya
reward for helpful answers

Create Cursor from File with big mouse cursor

Hi All,
I'd like to change the mouse cursor to a picture (.cur file) and back to normal again.
With the LabView vi "Create Cursor from File" and "set cursor" VIs it works, but the cursor is limited to 16x16 pixels (it will be shrinked if I load a biger .cur file).
Alternatively I tried to use the windows api to set the cursor (according to the example in Thread ) .
Setting the cursor to a biger size works now, but I'm not able to set the cursor back to normal again.
It seems to me, that the labview behaviour is overuled by the windows api.
Soes somebody know how to store the current cursor behaviour and reset it after I changed the cursor?
thank you
Mario Hirth
Attachments:
set_cursor_demo_8.2.vi ‏28 KB

Hi Mario,
I attached you an example which worked the way you want, I guess. It's saved with LabVIEW 8.6. Copy the coursor file cross_i.cur to a location you want and change the path to that location or copy it to C: and leave the path in the path control.
Regards.
TomBaum
Attachments:
example.zip ‏15 KB

Automator: Create folder from suffix of filename and put file names with same suffix into folder

I've been using a script to use automator to create a folder from the filename and put that file into it the folder just created.
I have a bunch of files that have similar names to them, but I don't want every file to be put into its own folder, instead I want all files with the same suffix (001) to go into the same folder. I would also like the folder name to just be named the same as the suffix (001) instead of the full file name.
For example all of these files names that end with the same integer (001) should be dumped into the same folder named "001":
Boston_ProRes422_1920x1080_24p_Audio_001
Boston_ProRes422_3840x2160_24p_Audio_001
Boston_ProRes422_3840x2160_24p_RAW_Audio_001
Boston_ProRes422_1920x1080_24p_Audio_002
Boston_ProRes422_1920x1080_24p_Audio_005
Boston_ProRes422_1920x1080_24p_Audio_010
Any help at all would be incredible!!
Thanks!
Here's the script I'm using right now:
on run {input, parameters} -- create folders from file names and move
set output to {} -- this will be a list of the moved files
repeat with anItem in the input -- step through each item in the input
set {theContainer, theName, theExtension} to (getTheNames from anItem)
try
set destination to (makeNewFolder for theName at theContainer)
tell application "Finder"
move anItem to destination
set the end of the output to the result as alias -- success
end tell
on error errorMessage -- duplicate name, permissions, etc
log errorMessage
# handle errors if desired - just skip for now
end try
end repeat
return the output -- pass on the results to following actions
end run
to getTheNames from someItem -- get a container, name, and extension from a file item
tell application "System Events" to tell disk item (someItem as text)
set theContainer to the path of the container
set {theName, theExtension} to {name, name extension}
end tell
if theExtension is not "" then
set theName to text 1 thru -((count theExtension) + 2) of theName -- just the name part
set theExtension to "." & theExtension
end if
return {theContainer, theName, theExtension}
end getTheNames
to makeNewFolder for theChild at theParent -- make a new child folder at the parent location if it doesn't already exist
set theParent to theParent as text
if theParent begins with "/" then set theParent to theParent as POSIX file as text
try
return (theParent & theChild) as alias
on error errorMessage -- no folder
log errorMessage
tell application "Finder" to make new folder at theParent with properties {name:theChild}
return the result as alias
end try
end makeNewFolder

Thanks Neil for the response! That script didn't work, but I did get it to work with my old script by changing "set TheName to" numbers different. Here's my final script which creates folders named "001", "002", and so forth and dumps in the files that end in that same suffix in the matching folder.
on run {input, parameters} -- create folders from file names and move
set output to {} -- this will be a list of the moved files
repeat with anItem in the input -- step through each item in the input
set {theContainer, theName, theExtension} to (getTheNames from anItem)
try
set destination to (makeNewFolder for theName at theContainer)
tell application "Finder"
move anItem to destination
set the end of the output to the result as alias -- success
end tell
on error errorMessage -- duplicate name, permissions, etc
log errorMessage
# handle errors if desired - just skip for now
end try
end repeat
return the output -- pass on the results to following actions
end run
to getTheNames from someItem -- get a container, name, and extension from a file item
tell application "System Events" to tell disk item (someItem as text)
set theContainer to the path of the container
set {theName, theExtension} to {name, name extension}
end tell
if theExtension is not "" then
set theName to text -5 thru -((count theExtension) + 4) of theName -- just the name part
set theExtension to "." & theExtension
end if
return {theContainer, theName, theExtension}
end getTheNames
to makeNewFolder for theChild at theParent -- make a new child folder at the parent location if it doesn't already exist
set theParent to theParent as text
if theParent begins with "/" then set theParent to theParent as POSIX file as text
try
return (theParent & theChild) as alias
on error errorMessage -- no folder
log errorMessage
tell application "Finder" to make new folder at theParent with properties {name:theChild}
return the result as alias
end try
end makeNewFolder

Render Markers to Files OR Create Sequences From Markers

Similar Messages

Maybe you are looking for