Create Sequence from Bin and retain sort order

I am trying to create new sequences by dragging a bin to the "new item" folder icon in the bottom right. It does create a sequence that matches the settings of the clips in the bin, but they are in a completely random order. The bin itself is sorted by name. If I select all of the clips in a bin and drag it to create a bin, they are sorted properly, but it is slowing down my workflow. Any thoughts? Does Premiere CC work this way for anyone else?

Not sure what to suggest except..
Posters often talk about wanting a faster workflow...
but it is slowing down my workflow.
FWIW
Maybe 1 minute invested in creating a New Sequence Preset (Custom) for now and future use..
Click On Bin - 1 sec
Ctrl-A ( Select all) - 1 sec
Drag to the Sequence - 2 secs
Cant think of a faster way to speed up your workflow apart from that.
[Text formatting corrected.]
Message was edited by: Jim Simon

Similar Messages

Creating a KD Tree and only sorting the points once for each axis

So right now I have some code for creating a KD Tree (2-Dimensions) but I am sorting the x and y values for the node each time I create a new node. Then I am taking the median, setting that as the nodes point, and passing on the left half and right halves of the remaining array to their respective children. I am using Arrays.Sort which I believe takes O(n log(n)) time per sort (once per node), but I have been reading a lot of stuff that states you can get the median in linear time so that the total build time is O(n log(n)). Unfortunately I am having difficulty understanding how. Here is a snippet of an explanation I found.
Each node has both x-list (ordered in x-coord.) and y-list (ordered in y-coord.)
Each pi in x-list and y-list is linked to each other.
Both x-list and y-list can be built in linear time using the two lists of its parent.
Thus total time to build all x-lists and y-lists is:
T1 (n) = O(n) + 2T1 (n/2) = O(n log n).
Since each splitting line can be found in O(1) time (via sorted lists), and there are n − 1 splitting lines in a kd-tree,
Thus total time to find all splitting lines is
T2 (n) = (n − 1) · O(1) = O(n).
Hence, total prepossessing time
= T1 (n) + T2 (n) = O(n log n).My question is, how can I build the arrays in linear time at each node? I have tried working it out on paper for the past few hours but lets say I sort the array using X first and I know that indices 0 - median will be on the left, however even if I had sorted the array by Y also, there is zero guarantee that all the points I need from x[0-median] will be in y[0-median]. They will obviously be included in x[0-median] but they will be sorted by x and not y, forcing me to resort at every single node.
Any idea?

swinte1 wrote:
My question is, how can I build the arrays in linear time at each node? I have tried working it out on paper for the past few hours but lets say I sort the array using X first and I know that indices 0 - median will be on the left, however even if I had sorted the array by Y also, there is zero guarantee that all the points I need from x[0-median] will be in y[0-median]. They will obviously be included in x[0-median] but they will be sorted by x and not y, forcing me to resort at every single node.
Any idea?So for example, you have 5 points and you sort them by x and y coordinates in two separate arrays:
x-list: 6 1 4 3 2 5
y-list: 6 5 1 2 3 4
Now you want just the points to the right of 4:
x-list: 3 2 5
y-list: 5 2 3
Create the x-list by iterating from the midpoint to the end.
Add each element in the x-list to a set..
Iterate through the y-list from left to right:
If the point in the y-list is contained in the set, add it to the new y-list.
This creates the arrays in linear time while keeping the points sorted. It does iterate over twice as many points in the y-list as needed though.

"Get photos from camera" advanced dialog sort order

Hello All,
I'm having a problem with the order of the photos in the advanced dialog when there are photos from more than one date. The import dialog orders the photos by decreasing date and increasing time. For example, a series of photos with the date/times (in order of being taken):
10/20/11 11:30 PM
10/20/11 11:31 PM
10/20/11 11:34 PM
10/21/11 01:03 AM
10/21/11 01:04 AM
will display as:
10/21/11 01:03 AM
10/21/11 01:04 AM
10/20/11 11:30 PM
10/20/11 11:31 PM
10/20/11 11:34 PM
Now imagine say one or two thousand photos taken over three or four days and wanting to rename them. Right now I have to load the group associated with each day, and then keep adjusting the index number so that the naming scheme will make any sense. This was asked in the previous post: http://forums.adobe.com/message/2981895#2981895 and has not been answered. The photo order really makes no sense to me. Surely there is some way of fixing this?
Many thanks in advance,
Chris Jones

OK, here is the situation as I see it.
Took another round of pictures on day two. Used the same method as outlined in post # 7. The day 2 photos show up first and then day 1 photos. This is in the same order as the pictures are shown on the card, with the newest pictures at the front. So if using advanced rename it starts the rename at the first picture on the card and works down, in this case newest to oldest.
Now I took the same card and pictures and used the method I always use. Short date + custom name. In this case since you are not renaming the pictures, it uses the camera name and therefore the pictures are labeled from oldest to newest. This is because the camera labels in an advancing sequence starting at the first picture.
So the easy way to avoid the problems you are addressing is to download the pictures to Bridge using the camera name, use the correct sort order, or manual sort to order pictures, and then do a batch rename. As the batch rename starts at the first pictures and works its way to the last picture in sequence.
If you feel this is awkward for your workflow I would suggest you submit a feature request to have a sort order on the photo downloader for some future update. If enought people submit the same request it may get done.
Let me know if this answers the question satisfactorily.

Equivalent for Create Sequence from clip in Extendscript

Hi,
     Please help me to create a sequence from a clip using Extendscript.(through jsx coding).
     I want to create a sequence from a clip in same way as a sequence is made through GUI when we click on "New Sequence from clip".
     This is very urgent please help..
Thanks and Regards,
Anoop NR

But before I grant this privilege, it was able to create the sequence from sql command only its like
CREATE SEQUENCE seq_name START WITH 1 INCREMENT BY 1 NOCACHE NOCYCLE;
Is the privilege specially required to be granted when used from stored procedure?

Render Markers to Files OR Create Sequences From Markers

This may have been asked before, but here goes (and yes, I did a search...extensively here and google):
Is there a way to set markers within a long sequence containing begin and end times. Either automatically create multiple sequences or video files with the same name as the marker.
I need to do this because I shoot long form Church services (1.25 hours) and need to output the Worship team performances separate from the sermon prior to upload. Currently, I have to duplicate the long video 6-7 times and set the in/out times to correspond to the markers. Then rename the sequences as the markers and then import them all to Media Encoder.
Vegasaur (a plugin for Sony Vegas) has this functionality. Much quicker and easier.
Thanks.
Wally

No, I'm afraid you can't do that trick from the iPad's Safari. What I do is take a snapshot of the screen when I want to keep a record. Press the Home and Lock buttons simultaneously real quick. You should hear a click and see the screen flash blank for a second. A snapshot of the screen will then be saved to your Saved Photos album. It's almost the same as having a PDF file of the page.
Oh, and welcome to Apple Discussions!

CREATE SEQUENCE from a stored procedure

Hello,
Is it possible, to create a sequence object from an own written stored procedure? Can I reinitialize the actual value of a sequence object without recreating it from a stored procedure?
Thank you for recommendations,
Matthias Schoelzel
EDV Studio ALINA GmbH
Bad Oeynhausen

maybe this example might be of some help.
SQL> create or replace procedure dy_sequence (pSeqName varchar2,
2                                           pStart number,
3                                           pIncrement number) as
4    vCnt     number := 0;
5 begin
6    select count(*) into vCnt
7      from all_sequences
8     where sequence_name = upper(pSeqName);
9
10    if vCnt = 0 then
11      execute immediate 'create sequence '||pSeqName||
12                        ' start with '||to_char(pStart)||
13                        ' increment by '||to_char(pIncrement);
14    else
15      execute immediate 'alter sequence '||pSeqName||' increment by '||to_char(pIncrement);
16    end if;
17 end;
18 /
Procedure created.
SQL> -- create the sequence by calling the dy_sequence procedure
SQL> execute dy_sequence ('test_sequence',1,1);
PL/SQL procedure successfully completed.
SQL> select test_sequence.nextval from dual;
   NEXTVAL
         1
SQL> -- alter the sequence to increment by 2
SQL> execute dy_sequence ('test_sequence',0,2);
PL/SQL procedure successfully completed.
SQL> select test_sequence.nextval from dual;
   NEXTVAL
         3
SQL>

Error Message While Running Sequence from Planning and/or SmartView

Following error is thrown while running a sequence from either planning or smartview at a higher level.
"*An error occurred while running the specified calc script. Check the log for details*"
This is very weird because it does not happened with any of the following:
1. Running same sequence from AAS at higher level
2. Running at lower level entity either planning or smartview
3. Running from Planning or smartview with split sequence at higher level
4. Running each rule within the sequence from Planning or smartview
What have we done?
1. Checked every log file, Essbase, Planning, HBR - no error message is logged despite above statement.
2. Recycled environment
3. Stopped and restated DB and APP
Other info:
1. DB.log file is 1.2gb
2. No meta data changes
3. We could not able to replicate same in Q and Dev
4. Looked at cache setting
5. Sequence does not fail at the same place
6. Recently updated calclockblockhigh to 15000 (restarted environment)
Environment:
Planning suite: 9.3.0.1 with 9.3.1 APS.
We are going nuts and any feedback is greatly appreciated!
Thanks!
Edited by: venuramini on Jul 9, 2009 3:50 PM
Added environment section.

Hi,
To start Planning as a foreground app, stop the Planning service and then go to Start - Programs - Hyperion Solutions - Hyperion Planning - Start Planning (Apache Tomcat).
Thats if you are using Tomcat of course. A DOS window should then pop.
What value did you enter for the HBR properties? Have you tried 960000 for both? Remember you need to restart the Planning services for changes to take effect.
Have you tried increasing some of the properties in the HBRServer.properties under Hyperion\AnalyticAdministrationServices such as:
HBR.timeout
Try setting it to 30000
The restart the AAS service for the changes to take effect.
Hope this helps.
Seb

HOW TO - Create new from clipboard and process multiple files - please help

Need help - have new version of photoshop on trial only ATM...
Want to know - HOW TO:
1. Create new from clipbaord
2. Process multiple files
Please help.

For clipboard copy, I start with File > New and the size will be set to what's in the clipboard. Then once the new file is opened, Edit > Paste will place the clipboard contents as a layer in the new document.
You must remember to use the command Layer > Flatten Image of you want to save as jpeg or any other file format that doesn't support layers.
For processing multiple files,
File > Automate > Batch or
File > Scripts > Image Processor...
Check the User guide or google information for those commands if you have specific needs.
Gene

Create Application from Database and Air

I have tried several time to use the create application from
database for an air app build in flex. I do the same steps and the
only difference is that I click the create button as air not web.
It does not seem to work. Does the create application from database
command (referencing php mysql) work with Air???
Thanks

Hi Dave,
Would you please file a bug with all the necessary details
regarding this issue? The bug base is found at:
http://bugs.adobe.com/jira.
We’ll look into this. Thank you for letting us know!
Lacra

How to paste from Word and retain formating

My co-worker and I are both running Dreamweaver. However for
some reason I can copy and paste from Word into Dreamweaver and
retain the formatting (bold/italic etc) but she can not. I've done
searches on this board and online in general but haven't found
anything about this issue. Keep in mind that we are not importing
HTML from word, just basic cutting and pasting. The paragraph
returns are retained but the bold/italic formatting is lost. We
don't need the styles to come through (and would rather they not
-they tend to corrupt the html-it get's all wonky) just the
formatting.
I'm sure it's something silly like a preference in Word or
Dreamweaver but we can't seem to find it, or any one else who is
having the same issue.
Our next step is to reinstall Dreamweaver to see if that may
clear the issue...
Any thoughts?

In DW 8 try PASTE SPECIAL. It gives you options for how much
or how little
formatting you want to retain when you paste.
MD
Scimino wrote:
> My co-worker and I are both running Dreamweaver. However
for some
> reason I can copy and paste from Word into Dreamweaver
and retain the
> formatting (bold/italic etc) but she can not. I've done
searches on
> this board and online in general but haven't found
anything about
> this issue. Keep in mind that we are not importing HTML
from word,
> just basic cutting and pasting. The paragraph returns
are retained
> but the bold/italic formatting is lost. We don't need
the styles to
> come through (and would rather they not -they tend to
corrupt the
> html-it get's all wonky) just the formatting.
>
> I'm sure it's something silly like a preference in Word
or
> Dreamweaver but we can't seem to find it, or any one
else who is
> having the same issue.
>
> Our next step is to reinstall Dreamweaver to see if that
may clear
> the issue...
>
> Any thoughts?

Creating Queries from Cubes and ODS

Dear Gurus:
I'd like to learn how to make queries from ODS and CUBES. can any Guru out there prescribe a particular infocube / ods project for me to make report on in both 3.5 and BI 7? I can send daily reports on my progress. I think this is the only way I will learn.. I may even have to seek help to create a simple architecture from Source DataSourc to Target Data Source to transfer Rules to InforSource to ODS to Cube and then fuill it with practice data just so that I can design a query / queries... Can any kind BW Guru offer me his/her assistance please... I may run out of a job if I dont learn soon...
<b>By the way... I would like to make it known that I am starting out totally from scratch.... As in ZERO BW 3.5 and/or BI 7.0 experience nor application background in either. Hence the why I seek expert advice.Your kind support, understanding and advice will be greatly appreciated to no end!</b>

The best way to start off is by reading the material on BW. The link below will give all the materials.
http://www.mysapbi.blogspot.com/
The to get hands on experience follow the scenarios in the best practices the link is below.
http://help.sap.com/bp_biv335/BI_EN/html/Bw.htm
And to get a tutor the best way I know is search for an institute in the following link
www.sulekha.com
Hope this helps.
Bhargava

How to import text from Word and retain italics and/or indented text?

Is it possible to import or copy text from Word into InDesign and retain italics or text that is indented in the Word version?

just wanna edit wrote:
Thank you, I think I understand the idea of "place" (which is what I would call "paste")
The two are not at all the same. Paste involves copying text to the clipboard and then pasting from the clipboard. Place is an import operation.

"Create Application from Database" and BLOB type

Hi all,
I see many threads about BLOB type but my question is related to the Flex Builder built-in feature "Create Application from Database".
Is there a way or a sw version to automatically use MySQL BLOB types when creating a PHP/database application?
Thank you!

Hi Dave,
Would you please file a bug with all the necessary details
regarding this issue? The bug base is found at:
http://bugs.adobe.com/jira.
We’ll look into this. Thank you for letting us know!
Lacra

New release! Create themes from images and more

It's a new release of kuler!
- Try color extraction, a new feature to create themes using
photos and other images, with different "mood" options.
- You've requested it, here at last: endless favorites. Save
all that color goodness to Mykuler.
- Random browsing: Try your luck and see what randomly
selected themes kuler serves up.
We've made a few other tweaks, I'll let you discover them for
yourselves. Please post your feedback here; we're especially
curious about color extraction and how this creative group will put
it to use. Enjoy, folks!
the kuler team

Awesome, Sami! I haven't tried the site yet, but the new AIR
extension is
great. I'll try out the site .. soon .. and give some
feedback. Terrific
so far!
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"Sami Iwata" <[email protected]> wrote in
message
news:frpioi$mp3$[email protected]..
> It's a new release of kuler!
>
> - Try color extraction, a new feature to create themes
using photos and
> other
> images, with different "mood" options.
> - You've requested it, here at last: endless favorites.
Save all that
> color
> goodness to Mykuler.
> - Random browsing: Try your luck and see what randomly
selected themes
> kuler
> serves up.
>
> We've made a few other tweaks, I'll let you discover
them for yourselves.
> Please post your feedback here; we're especially curious
about color
> extraction
> and how this creative group will put it to use. Enjoy,
folks!
>
> the kuler team
>

Can't create PDF from Word that retains links

I'm using Microsoft Word from Office Professional 2010, Version: 14.0.7116.5000 (64-bit) with Windows 7 Ultimate, Service Pack 1, and Adobe Acrobat X1 Standard 11.0.03.
Whenever I use a particular font (which is the main font I use for text, so I can't really use something else), and try to retain the links in the Word document, it never creates the PDF properly. For example, if I print to Adobe PDF, using many different settings, the font embeds properly but the hyperlinks are never retained (by "hyperlink" I mean the text in Word that is selected and has an underlying web link). I've tried many different Acrobat settings, and Word settings, but nothing seems to make it retain the links when I'm using Print to create the PDF.
But, if I use the Acrobat tab in Word, and the Create PDF button, the PDF will retain the links, but the main font I use (Mercury Text Fonts | Hoefler & Co.) is never embedded (despite all the settings I've tried), and instead that main roman font is replaced with a bold version of that font. NOTE: There are NOT license restrictions on the font, which is especially obvious since the bold versions of the font embed no matter what, and the regular roman version of the font embeds when I print to a PDF not using the Acrobat tab.
Of course, I have indeed used Acrobat's advanced settings to "always embed" the particular font, but it still won't embed.
How can I resolve this? I don't mind calling premium Acrobat support is such an option exists. Thank you.

93654User, I looked at the Hoefler website. It is not clear to me that their license allows for the embedding of fonts in pdfs: Create and modify Embedded Software Files, using the Permitted Computer(s). Licensee is also permitted to reproduce, distribute and display Non-Commercial Documents without obtaining an additional license. For clarity, except for Non-Commercial Documents, no right to reproduce, distribute or display any Embedded Software Files is granted by this license. In order to reproduce, distribute or display an Embedded Software File created pursuant to this Section that is not a Non-Commercial Document, Licensee must obtain a Software Distribution License, a Commercial Digital Publishing License, or another license as specified by Licensor. Please contact Licensor at [email protected] if you require these additional rights. All Embedded Software Files created pursuant to this subparagraph must comply with all of the following: I would contact the company to see if they allow licensing in pdfs. Also early versions of fonts from many years ago had a non-embed font flag improperly set. The only way you can be sure what is happening with this font is to contact its maker.

Create Sequence from Bin and retain sort order

Similar Messages

Maybe you are looking for