Rendering @Fontface distorted in input fields

Safari only is rendering am @fontface font poorly. Once you leave the tab/window then come back to it, it renders. The textarea is fine because it's not using the font-face. The @fontface is imported and not imbedded.
Solution Ideas:
1. Don't use special font for input forms - not a real solution
2. Try base64 loading the font in the stylesheet - will try now
Any other suggestions? I've Never seen this issue in all my years of web design.

Similar Messages

How to set focus on a input field in a selected row of a table?

In a previous discussion (http://scn.sap.com/thread/3564789) I asked how to access an input (sap.m.Input) field of a selected row in a table. In the answer that was supplied I was shown how to get the items of the table. Then using the selected index to get the selected item get the cells. Then I could set editable on the proper cell(s). This worked fine.
Now I need to set the focus on one of the fields. I tried something like this:
            var oNewLink = table.getSelectedItem();
            var oNewLinkName = oNewLink.getCells()[1];
            oNewLinkName.focus();
But this doesn't seem to work.
I have searched through other discussions and have seen this technique for putting focus on a field if you have its ID:
sap.ui.getCore().byId(id_of_the_input_field).$().focus();
In my case though I do not have an ID since the row and its cells are generated. How can I set focus on the cell of a certain row in a table?

Hello Venkatesh. Yes that code does work. First I tried it on a table cell that was already rendered and it did work. The next time I tried it on a table row that was being added and it did not work there. So I added an on after rendering function for the table and added that code there. That did not work until I added a delay (timeout) to do a context switch before calling the focus and that worked.
Once last thing though sometimes when I call focus on an input field (actually in a table row cell) if the field has text in it already the flashing cursor is at the beginning of the text and other times it is at the end of the text (which is the desired way). It depends on where I click in the row. Is there anyway to make sure the flashing cursor is at the end of the text when the focus is applied to a field that contains text?

Mouse scroll wheel do not command Photoshop input fields correctly

Hi guys,
Some general info:
1. I have Logitech Keyboard K800 - it have its own receiver
2. I have Logitech Mouse (MX1100) - it have its own receiver
3. Photoshop CS6 x64 - latest updates
4. Windows 7 x64 - latest updates
5. SetPoint - latest version
6. More about the system (please let me know if I have to post all the text from Photoshop System Info popup):
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3410 MHz
Built-in memory: 16342 MB
Free memory: 9098 MB
Memory available to Photoshop: 14718 MB
Memory used by Photoshop: 90 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 560/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1050, right: 1680
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 560
OpenCL Version:
Driver Version: 9.18.13.1090
Driver Date: 20121229000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1680 x 1050 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 560
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 92298292820550253494
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\kckfm\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
F:\, 685.6G, 198.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Some other info:
You know that you can control Photoshop input fields http://screencast.com/t/ApVseKYRxz with the mouse scroll wheel. Pretty handy indeed. You just have to click on the field and spin the wheel and values changing.
The problem:
My mouse wheel cannot control the input fields in this way. I select the field, spin the wheel and nothing happen. When I spin it faster a couple of times, than the values get changing - pretty strange ha? Scrolling normally - do not change, scrolling fast change. But to scroll fast is not an option because I cannot change the values slightly with small increments... There is a bug really...
What I tried and didn't work:
1. Restarted Photoshop
2. Plug/Unplug and change different USB slots for both receivers.
3. Reintalling latest SetPoint Drivers (after uninstall I run ccleaner)
4. Put all SetPoint settings to defaults (because I programmed some mouse keys to Photoshop specifically).
5. Install earlier versions of SetPoint drivers.
6. Set my UEFI BIOS to defaults.
7. Restarted the BIOS to load all the drivers again, but still no luck
(the last think I didn't do is to reinstall Photoshop)
What I have investigated so far:
1. When I restart the computer and run Photoshop it works perfect HA! , but after a seconds it do not words again ...
2. When I stop SetPoint software, when I shut down it, it words perfect.
3. When I unplug keyboard receiver it words perfect, but I do not have keyboard:)
4. Everything works perfect in Illustrator and After effects.
5. Also I noticed that when I scroll images in CameraRaw - http://screencast.com/t/xKnn6cY9 the I have to scroll harder and spin the wheel harder to scroll - the same problem.
6. Also in photoshop and bridge scrolling here - is pretty smooth and works perfect - http://screencast.com/t/75IXMG6Zria
Maybe the most important part - When I start experiencing the problem:
I had same configuration , same everything and everything worked fine.
I installed SSD disk, reinstalled Windows (same like before), updated my BIOS to UEFI. Installed Photoshop and SetPoint and problem started.
Posted same request to Logitech, but want to ask you for help too.
Thanks!

Hi all,
I found a solution.
1. Uninstall your current Setpoint Driver.
2. Run CCleaner - http://www.piriform.com/ccleaner
3. Download an older version of SetPoint - http://www.oldapps.com/setpoint.php
(I used SetPoint 6.15 (x64), I tried 6.20, 6.32, 6.50 , but no luck)
4. Now everything is all right!
Thanks!
Can somebody mark this as solved? Thanks!
SK

How to link label with an input field in data table?

I am curious if there is a nice way to link a label to input field in a data table directly in JSP? Data filling the table are dynamically bounded.
Sample, simplified code below. Values of "label" property are unique in the collection binded to dataTable.
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core"
     xmlns:h="http://java.sun.com/jsf/html"
     xmlns:jsp="http://java.sun.com/JSP/Page">
     <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8" />
     <f:view>
          <html>
          <body>
          <h:dataTable value="#{screen$monitoring$errorlog$CorrectHopper.dataset}" var="DATA_ROW">
               <h:column>
                    <f:facet name="header">
                         <h:outputText value="Name" />
                    </f:facet>
                    <h:outputLabel value="#{DATA_ROW.label}" for="#{DATA_ROW.label}_id" />
               </h:column>
               <h:column>
                    <f:facet name="header">
                         <h:outputText value="Value" />
                    </f:facet>
                    <h:inputText value="#{DATA_ROW.label}" id="#{DATA_ROW.label}_id" />
               </h:column>
          </h:dataTable>
          </body>
          </html>
     </f:view>
</jsp:root>
returns:
17:39:01,390 ERROR [[jsp]] Servlet.service() for servlet jsp threw exception
java.lang.IllegalArgumentException: #{DATA_ROW.label}_id
what is related to EL expression in h:inputText's "id" attribute.
Is there any other way to bind label with dynamically created input field in JSP? Do I really have to bind input field directly to component objects with "binding" and set IDs manually with setId() (what is ugly solution because it moves View related logic to Model layer)?

I've thought of using EL because I have to somehow
link a label to an input field dynamically. Somehow? Dynamically? Just use plain text :)Well... just look at my code snippet (notice: we want to join the pairs of labels and text boxes placed in a datatable [or any other repeater-like component rendering properties of objects from a collection]):
<h:dataTable value="#{screen$monitoring$errorlog$CorrectHopper.dataset}" var="DATA_ROW">
<h:column>
<f:facet name="header">
<h:outputText value="Name" />
</f:facet>
<h:outputLabel value="#{DATA_ROW.label}" for="#{DATA_ROW.label}_id" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Value" />
</f:facet>
<h:inputText value="#{DATA_ROW.label}" id="#{DATA_ROW.label}_id" />
</h:column>
</h:dataTable>
and what is your idea of using plain text as "id" attribute value in this case? :)
Regards,
Michal

Pressing tab key within table not scrolling to next input field

Hi All,
I have a table with editable and read only fields. I have more than 20 columns. When the tab Key is pressed it scrolls only to the editable fields that are in the visible screen. It does not scroll the table to the right to the next input field.
However if I change the screen size so that the scroll bar is required for the browser then it will scroll across moving the browser scroll bar, moving the cursor to the input field that was not visible. Again it does not go further moving the scroll bar within the table to the next editable field to the right.
The table has been set to scrollable with the scrollable column count set to 8.
We are using explorer 8 on 7.01
Is it possible to have the tab key move from input field to input field scrolling the table to the next input field if it is not visible yet?
Thanks
Bruce

What you describe sounds like the correct functionality. If you set a scrollable column count, only the visble rows are actually rendered on the client side. When you use the horizontal scroll bar, you are triggering a server side event to retrive the next set of visible columns. Therefore the browser doesn't actually know anything about non-visible columns and hence the tab can't go to them.
When you increase the number of visible columns (or don't set anything for visible column) you render al the columns on the client side and use the browser scrolling. Therefore the tab works.

Using cfif in input fields

I know rest buttons are useless, but my customer wants one,
so here I am. I have a form, and the text input and radio buttons
have cfif statement to check for values. It all works well. But, by
putting cfif in the input fields, the Reset button will not work.
If I take the cfif statements out, the Reset button works fine.
Just not with the cfif statements. Is there any way around this?
My code is:
<input type="radio" name="first_rate_calc" value="0"
onfocus="CLEARFORM()" <cfif
isDefined('form.first_rate_calc')><cfif form.first_rate_calc
EQ 0>checked="true"</cfif></cfif> />
and
<input name="current_multiplier" type="text"
id="current_multiplier" size="5" maxlength="5" <cfif
isDefined('form.current_multiplier')><cfif
form.current_multiplier NEQ "">Value=
"<cfoutput>#form.current_multiplier#</cfoutput>"</cfif></cfif>
/>

DaSpaz wrote:
Define 'Does not work'?
Other then some horable tag nesting going on there, I do not
see any
obvious reason why your code would not work with the 'reset'
HTML control.
Clicking on the reset button should return any changed values
in the
form to the original value when the form was first rendered
by the
client browser.

F4 help icon and Drop Down icon turned to input field in EHP4

Hi,
I am facing one strange problem, I have a system in which ECC6 with EHP3 was installed. Everthing was fine so far.
But as soon as we have upgraded to EHP4 package level 2 Web Dynpro Applicaiton UI rendering problem started.
1. F4 search help icon changed to input field like ui which does not takes any input but responds when user clicks on that field with normal F4 Search Help screen.
2. Drop Down icon also changed to input field like ui which does not takes any input but responds when user clicks on that field with normal Drop Down appears.
Any resolution for this?
-Haresh Khandal

Hi,
Yes, I also faced the same issues. I guess some patch levels you need to apply. Please approach your basis team for the same.
One moe thing, As a temporary solution, try to increase the width of those UI elements so that you can be able to the dropdown icons and F4 help icons clearly.
Try out this way.
Regards,
Lekha.

Conditionally disable input field

I was hoping for suggestions or practical advice on how to conditionally disable field on an ADF from. As the user enters data on the form I would like to grey out certain field based on the fields that are being populated.
Thanks

Hello
I have a similar situation..thats not working.
This is what I have: (levels are nested)
Level 1: panelGroupLayout -scroll (pgl1)
Level 2: I have a SELECT ONE RADIO (sor1) in a panelFormLayout. (pfl1)
Level 3: Two input fields in a panelGroupLayout. (pgl2)
The SELECT ONE RADIO has autoSubmit = TRUE, and the partial trigger for pgl2 is set to sor1 and I used EL Expression for Rendered to #{bindings.RI.inputValue=='YES'}.
But whenever I run it, the pgl2 is not showing which is correct, but when I select YES from the radio buttons, it won't show up either.
Any suggestions?

Unable to capture Input field value on BSP page

Hi
I have copied ROS (SRM) standard application ROS_PRESCREEN3 into custom and added one input field .
Now when user enters some value in it , i am not able to get that value in my back-hand code.
I have treid the availble code on Fourm , its not working .
Regards
Raul

Hi ,
I am getting the input field values in my back hand using MVC .
Regards
Raul

How to use one pop up window for multiple buttons and input fields?

Hi Experts,
I have created a pop up window that will be opened from multiple buttons in the same view. There are input fields that the data will be populated from a pop up window. How can I set up which button that a pop up window is opened from? I also would like to populate the data from a pop up window to the input field next to a clicked button. There are 6 buttons and 6 input fields that share the same pop up window. I would very appreciate your responses.
Thank you,
Don

Hi,
Try creating 2 context attributes, one in your component controller and the other in the pop-up view. Bind the attribute of pop-up view to the component controller attribute.
In the main view, on click of every button set a unique code in the controller's context which helps you in identifying the button clicked. Since u have created a binding to the pop-up view attribute the value flows from the controller.
In the init method of your pop-up view, check the value of the attribute and based on that display which ever UI elements are required.
Eg:
On Button 1 click set value "B1", Button 2 value "B2" etc. In the init() of pop-up view u can check the values and perform the required operation:
if(("B1").wdContext().currentContextElement().getButtonIdentifier()){
else...{
Hope this helps you.
Regards,
Poojith MV

Want the data store values to be displayed in input field of form

Hi,
I wanted to know wether is there possibility of displaying the data in a input field instead of expression field.
In our model i have used a form which has material type,plant and Vendor connected to data service1 in turn gives the out put in chart and i also have the second input form which has To(0CALMONTH) combo box which is connected to Data service2 and gives the data in table.
But what i wanted is to i also want to use the input fields of first form to second Data service2 and get the data based on on inputs of form1 and form2i.e also To field.
We can connect the port from form1 to DS2 but problem is we need to click the submit of form1 and form2 and it doesnt gives the output according the input of form1 and form2 as it gives the output of that form when we click that submit button.
I have followed help.sap for data tore procdure.
So i have used a datstore where i will store the values of form1 and call it in expression field which i will add and hide it in form2(hide because user should not see that input fields).
Formula used in data store for expression field.
IF(CONTAINS(STORE@matltype,@Material_Type),STORE@matltype,STORE@matltype &(IF(LEN(STORE@matltype)>0,'; ',''))&@Material_Type)
But whats happening is the value is getting concatenated when i goon change the values in input field, so i wanted to get the values to be replaced as soon as i change input field of form1(if use replace function its not working) and also it would be more preferrable if we use input field instead of expression field.
I would also like to know is there any alternate solution for the above requirement instead of datastore.
Thank You
K.Srinivas

Hi,
I have Form1 connected to Data service1 displays the data in a Chart and i have another Form2 connected to Dataservice2 displays the data in table.
In form1 there are Material Type,plant, and Vendor and form2 i have To (0CALMONTH)SO now i want also Form1 inputs for Table which gets teh data from Dataservice2.
What i have said earlier is connecting Form1 to Dataservice doesnt fetch the data correectly,its because if i click submit in form1 i get the data of those 3 inputs and i need to click the submit button in form2 after giving input which shows the data accordingly where it doesnt fulfill the requirement.
So i wanted some solution for that.For that reason i have used the data store and the procedure i have followed the help.sap as i said in my above mesage.
If Data store is also suggestable than i want to display the data in Text input Field instead of Expression field which should replace the previous values as soon as values change in data store.
Hope i have tried to be clear if still it is not i am ready to explain again.
Thank You
K.Srinivas

Input field value help

Hi all,
i gt problem to gt the value from the input field:STUDENT-OBJECT_ID, STUDENT-FILE_NAME into my sql statement. I using module. When i delcare a static value objectid = stud. My sql statement can regnoize. How can i gt the objectid base on my input field in the module?
MODULE VALUE_FNAME1 INPUT.
<b>*objectid = STUDENT-OBJECT_ID.
*filename = STUDENT-FILE_NAME.</b>
<b>objectid = 'STUD'.
filename = 'STUDFILE'.</b>
SELECT FIELD_NAME
    FROM STUDENT
    INTO CORRESPONDING FIELDS OF TABLE values_tab1
WHERE OBJECT_ID = objectid and FILE_NAME = filename.
endmodule.

Hi Gary,
Check the below code.
tables: t001k.
For Identification Number
DATA: BEGIN OF it_bwkey OCCURS 0,
        bwkey LIKE t001k-bwkey,
      END OF it_bwkey.
data: v_bukrs(4).
For Run date
DATA: BEGIN OF it_bukrs OCCURS 0,
        bukrs LIKE t001k-bukrs,
      END OF it_bukrs.
DATA it_ret LIKE ddshretval OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK main WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS:    p_bukrs(4) TYPE c.
SELECT-OPTIONS s_bwkey FOR t001k-bwkey NO INTERVALS.
SELECTION-SCREEN END OF BLOCK main.
Validation Section
INITIALIZATION.
SELECT DISTINCT bukrs FROM t001k INTO TABLE it_bukrs.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_bukrs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'P_BUKRS'
      value_org       = 'S'
    TABLES
      value_tab       = it_bukrs
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_bwkey-low.
TABLES: t130r.
DATA: BEGIN OF dynpfields OCCURS 0. "Hilfsstruktur zum auslesen des
          INCLUDE STRUCTURE dynpread. "Feldwertes vom Dynpro bei >F4<
DATA: END OF   dynpfields.
DATA : sy_repid LIKE sy-repid,
         sy_dynnr LIKE sy-dynnr.
CLEAR dynpfields.
REFRESH dynpfields.
dynpfields-fieldname = 'P_BUKRS'.
APPEND dynpfields.
Lesen des akt. Wertes von Dynpro
sy_repid = sy-repid.
sy_dynnr = sy-dynnr.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = sy_repid
      dynumb     = sy_dynnr
    TABLES
      dynpfields = dynpfields
    EXCEPTIONS
      OTHERS     = 01.
IF sy-subrc = 0.
    READ TABLE dynpfields WITH KEY fieldname = 'P_BUKRS'.
    IF sy-subrc = 0.
      v_bukrs = dynpfields-fieldvalue.
    ENDIF.
ENDIF.
SELECT bwkey FROM t001k
INTO TABLE it_bwkey
WHERE bukrs = v_bukrs.
DELETE ADJACENT DUPLICATES FROM it_bwkey.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BWKEY'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'S_BWKEY'
      value_org       = 'S'
    TABLES
      value_tab       = it_bwkey
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

Input Field: Value Range in IP Web Layout

Hi Experts,
I've created a Web Layout based on IP with a copy function (e.g. from actual 2008 to plan2009) over 12 calendar months. For choosing the months to be copied, I created a Variable (calmonths) and added an Input Field into my layout to enter the the months to be copied. I referred the variable to the input field and it's working...
When I want to select several months to be copied, I can type in " 1; 2; 3; " into the input field, execute the planning function and only month 1, 2, 3 (i.e. Jan, Feb, Mar) are being copied. But when I want to copy all 12 months, i have to enter 1; 2; 3; 4;...11; 12 which is kind of anoying! Has somebody some experience whether I can use a value range like 1-12 (or something like that) to avoid entering all the months individually? (I tried 1-12; 1- 12; 1 - 12; 1:12 etc but nothing like this is working)
It would be very helpful if someone has an idea
All the best,
Norbert

Hi Mayank, hi Srinivas.
Thanks a lot for your valuable input! Unfortunately I was not able until today to test your recommodations.
I tried your Interval variable but then faced the problem that I cannot enter multiple months anymore (e.g. 5 - 8 worked, 1; 3; 5 not). Then I inserted both variables, multiple values & interval, into the planning function as well as in the button group in WAD for executing the PF but was not able to execute the following example: 1; 8; 4 - 6. After trying out for some time I figured out that one has to type in the figures in the following order: 4 - 6; 1; 8. Only then I am able to execute the planning function for the months April-June & Jan & August. So, if you're facing the same problem in the future, maybe you have the solution
Best regards,
Norbert

Input Field of Type Time Unable to Keep Input Value

Hi,
I am facing the following problem:
I am using an input field of type time that initially its value comes from a BAPI call. I want though to be able to change its value and use the same field as import parameter for another BAPI. The value of the field is populated correctly from the first BAPI but when I try to change it, the value disappears and it does not keep what I type within the field i.e. the field remains empty.
Could you please let me know how to resolve this problem?
Thank you in advance.
Kind Regards
Michael

which runtime do you use?
which version of VC?

How to get Input field value?

Hi All,
I have some problem in getting of input value from View to customcontroller.
My problem is I have created a Input field in the view and if Iam giving the value to that field I can capture the value from View to customcontroller and send it as BAPI input.But My input filed is in the view Context.
How can i capture InputFiled value from View to CustomController.
Advance thanks
Nageswara.
Message was edited by: nageswar mandapati

Thanks for your response Patrick,
In my customcontrollerView all my BAPI mathods instances and execute methods are declared.All the attributes directly getting from model class.
But I have two views , in first view I created a input field(for that i created valueAttribute in that context).
Here I want give the conditions If the input field is empty then directly call the execute method of BAPI.
Otherwise give any input to the inputfiled then capture that value and send it input to BAPI from view to BAPI.
In my customcontroller
BAPI b = new BAPI();
b.Param1();
b.param2();
and
execute BAPI()
I done like this.
How can i capture the view input value how to send as a b.parama();
Please guide me .
Any snippests appriciate.
Thanks
nageswara.

Rendering @Fontface distorted in input fields

Similar Messages

Maybe you are looking for