"REORG and RUNSTATS for set of tables" job

Hi,
In this DBA Planning Calendar job, there's an option for Keep Dictinary. How can I run a reorg with RESET Dictionary?
To me, Keep Dictionary should be the default option for reorg, and no need to check this box on job scheduling. What's missing is the Reset Dictionary.
Can someone comment on this?
Thanks,
Patrick

Hi Patrick,
The behavior of the reorg with or without keepdictionary or resetdictionary depends on the compress flag for the table. Like you mentioned, it would make sense to assume keepdictionary as the default and use resetdictionary based on the user input in the GUI.
An easier way to control this in my experience is to use "automatic maintenance settings" (under the configuration drop down) and carve out an offline reorg window for the required tables with the ability to choose the right dictionary rebuild option. With version 9.5 and automatic dictionary creation (ADC), rebuilding the already existing compression dictionary has been a moot point in our landscape.
Hope this helps.
- Sameer

Similar Messages

REORG and RUNSTATS: any order of precedence?

Hi.
Is there any documentation on Reorg and Runstats?
I am confused about what role each of these play on what table (ex. P, Q, X, Y etc). It all began with ST04 where I tried to manully run the REORG and Runstats (as the ACR was not running OK) and I was confused because after each of them ran, the status was shown as either "Reorg & Runstats run" or "Runstats & Reorg run".
Is there any precedence on running them, e. g. Runstats first and then REORG? Or the vise-versa? What should be the order of the tables, e. g. P, Q, X, Y etc or X, Y, P, Q etc.
And if anybody could please shed some light on how do RUNSTATS & REORG help with the ACR, that would be greatly appreciated.
Also, as two of the gurus mentioned last week, is the SE38 -->RSDDS_CHANGERUN_MONITOR program a must/good to have for the health of the ACR? I am asking this as the BASIS guys say there is no need etc.
Thank you very much.

Hi Gurus.
I have kind of an odd situation.
I am running a query on the Web Application Server. It runs fine over there, with the complete expected results (1.3 million records). But when I try to save it as a .CSV file (for further uploads through an InfoPackage), the file is truncated and saves just some 21K records.
Only one of my colleagues can save the complete file. Three of us have the file saved but it is being truncated.
Any idea of why is it so?
Thanks a lot.

Billing Set up - Parallel jobs and size of set up table

Hello All,
I want to do a billing (13) set up using comp code, sales org and document number range as selection criteria.
Would it be okay to to run jobs in parallel. I will be setting up jobs for different variants containing different document ranges. Would there be a conflict in running parallel jobs if they belong to same company codes/ sales org?
Q.2 Is there a limit to which we can fill up the set up table and will need to empty it after transferring the data into BI?
Thanks!
Edited by: BI Quest on Oct 7, 2009 6:22 PM

You can run multiple concurrent setup jobs without an issue. I'd recommend that you only execute 4 concurrently, however, unless you have a huge amount of memory on your source R3/ECC server(s). If you're using the Billing Document as part of the selection criteria, there shouldn't be a conflict. In fact, if you're using Billing Document as the selection criteria for your multiple setups, the Company Code and Sales Org designations really aren't necessary, unless the Billing Document numbering in your source R3/ECC environment has been configured to number based on Company Code and/or Sales Org, whereby you could have duplicate Billing Document numbers and the way to distinguish between them is to further qualify by Company Code and/or Sales Org.

Procedure for setting a background job

Hi Experts,
Please give me the step by step procedure in setting a background job.
Thanks,
Kavin

Hi,
Specifying ABAP Program to Run in Background
ABAP program or external program can be specified to be run in the background. More than one program can be executed with a single background job. To do it you should add a job step for each program.
Let us first discuss the procedure for creating an ABAP report.
The Users field will, by default, display your name, indicating that the user (you) is authorized to run this program.
In case there is another user authorized for scheduling the job, then the default name is changed and system displays the name of the other user.
Now choose ABAP and enter the name of the report.
Choose variant from the Variant list. Specify the language you want the report to be in.
With Print specifications, you can specify whether you want the report output to be held in the SAP spool system or have it printed as soon as the job has run.
For external command, by default, the job step will run under your SAP System authorizations. So your name will appear in the User field.
But if the program is running under the authorization of another user, you can change this default option by entering another user name.
Then choose External command and enter the predefined SAP name. If required, enter any additional arguments required for the command.
The host system on which the command should run and the type of operating system at the host should be specified. You can determine the host name using the host name command on the target host system.
You can also specify how the output from the external program should be treated, as well as other runtime options by using Control flags. It is advisable to use default settings for these options. If you are authorized for background processing, you can also choose External programs as a job step option.
To run an external program, enter the exact path, program or script name, arguments required by the program, and the name of the host system on which the program is to run. After this, save the job step and return to the job identification screen.
Note that in the SAP system the ABAP programs are not predefined; therefore, the system does not perform an authorization check. Hence, the system does not bother to check whether you are allowed to use the command.
For detailed information on Background Job, Check the following link and help.sap.com,
http://aspalliance.com/1129_Background_Processing_SAP_R3_System
Hope this helps you.
Regards,
Vinodh

Timed Subvi run and stop for set time

I have a program cod controlling temperature, i need subvi run for 5 minutes and stop for 5 minuts continously to controll current source supplying heater around my sample by continous pulses of mA.

Hello MaTaRaWeY
Could you be more specific, maybe use a VI with comments to help explain your problem better,
You may also like to look into the "Wait (ms)" node under the Timing Palette.
Derick Mathew

Dynamic Upload and Insert for each Z Table

Hi all
i search a blog or solution for dynamic upload each Z table with external data.
Because we have a lot of migration table and we will fill it dynamic from .txt or excel or others and with out check fill it to SAP.
My wish is an ABAP
Parameter: Z-table name
path to upload
inside on abap, take the structure from Z table and merge the external data to table
Thanks for help

the code for u...
http://www.sapfans.com/sapfans/repos/neil.htm

Columns and Rows for Text (invisible table)

I am trying to create text on 15 rows in 3 columns in an invisable table for a drinks menu with corresponding drink sizes (ml) and prices. I used the option Type > Area Type Options and added a grid. I encountred 2 problems:
Firstly the grid disappears (or I just cannot view it) , and secondly, i do not want the columns to be of equal size - I am looking to achieve a 60%-20%-20% ratio. I cannot find a way to resize the column widths, Would be grateful for any advice

Hi Steve, thanks. I get you as far as 'Split into Grid'. I still cant figure out how to increase the size 1 whole column (of 15 rows) in one sweep and to decrease the size 2 other columns (of 15 rows each) as one would do in an xls. chart. To widen each one seems tedious and with transform the cells are widened, but the other 2 do not automatically decrease in size. The The whole idea of the operation is simply to align the drink item to the amount (in liters) and price (horizontally) but keeping the cell content alignment (vertically uniform throughout the columns Drink name = align Left and Drink amount = align Righ as in Example which I created from a xls chart .

Pricing and plans for setting up new virtual machines

Hi,
We are having our dedicated servers with below mentioned configurations and now we are planning to move them to Microsoft Azure virtual machines.
we would like to have your suggestions and plans to move our all applications to Azure virtual machines.
We are having
8 different web applications,
1 Scheduler service,
Mobile push Notifications for mobile apps,
1 BI Server,
4 databases
Currently we are using 4 servers for all the above mentioned applications/services applications.
Our current server details are as below
S.No      Server Details
1              Processor                           2x
Xeon CPU E5-2620 @ 2.00GHz
2              CORE                                  2x
12 Core
3              HDD                                    3x
1TB (RAID 5)
4              RAM                                   16
GB RAM
5              Bandwidth
50,000 GB
6              Windows Server               Windows Server 2008 R2 Standard
7              IIS Version
7.5
8              SQL Server
Microsoft SQL Server 2012
9              Services
Web Server,database and BI server.
Looking forward for valuable suggetions and response.
Regards
Denise

Hi,
As I know,  you need to create an Azure VM with IIS installed to host your 8 web application, create an azure oracle VM to host BI server, and create an Azure SQL Server VM to host your 4 database, for Scheduler service, please try to use Azure Scheduler
service:
http://azure.microsoft.com/en-gb/documentation/services/scheduler/Azure Notification Hubs provide an easy-to-use infrastructure that enables you to send mobile push notifications from any backend (in the cloud or on-premises) to any mobile platform, see
more: https://msdn.microsoft.com/en-us/library/azure/jj927170.aspx
Please try to estimate your bill at azure pricing calculator:
http://azure.microsoft.com/en-us/pricing/calculator/
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error while filling set up tables for 2LIS_11 data sources

hello All ,
I tried to fill setup tables for 2LIS_11 data sources in OLI7BW , but the job RMCVENUA is getting cancelled. below is the Job Log ,
Job started
Step 001 started (program RMCVNEUA, variant &0000000000005, )
Start of order processing
Error determining rate: foreign curr. local curr. INR date 10.09.2008 (doc. 1)
Job cancelled
Is there any setting required in R3 side before filling setup tables of SD ?
I am able to fill the setup tables for 2LIS_05 ( Notifications) successfully.
Regards ,
Amol Kulkarni
Edited by: Amol Kulkarni on Dec 4, 2008 3:59 AM
Edited by: Amol Kulkarni on Dec 4, 2008 4:00 AM

Hi,
one of the sales document currencies is not maintained properly in the system and therefore its failing.
you need to correct those documents before filling the set up tables.
Either you can chose the option fault document toleration limit to 1000...so that 1000 records wrong records can be tolerated or you have to crrect it first before filling up the set up tables.
This will generally happen in test systems.... but very rare in production...so try to maintain currrency again in the system.
generally you will see the sales doc number in the error for which its failing.
May be at the time of filling some óne was working on some sales document and tried it save it.
correct that doc and fill the set up tables again.
Thanks
Ajeet

How set tha table boundry and how set table in panal

hi master
sir this is my table code
import javax.swing.*;
import java.awt.*;
import java.util.*;
public class fahimtable extends JApplet {
String[] columnNames = {"First Name",
"Last Name",
"Sport",
"# of Years",
"Vegetarian"};
Object[][] rdata = {
{"Mary", "Campione",
"Snowboarding", new Integer(5), new Boolean(false)},
{"Alison", "Huml",
"Rowing", new Integer(3), new Boolean(true)},
{"Kathy", "Walrath",
"Knitting", new Integer(2), new Boolean(false)},
{"Sharon", "Zakhour",
"Speed reading", new Integer(20), new Boolean(true)},
{"Philip", "Milne",
"Pool", new Integer(10), new Boolean(false)}
/** Initializes the applet fahimtable */
public void init() {
JTable table = new JTable(rdata, columnNames);
getContentPane().add(table.getTableHeader),BorderLayout.NORTH);
getContentPane().add(table);
initComponents();
private void initComponents() {
==========
sir this give me table but my need is the table in panal
now table cover the all applet
sir how set i table in panal and now i set tha table boundry and header
please give me idea
thank
aamir

Learn how to use the forum correctly. This is now your 6th posting on basically the same topic.
Not once have you bothered to reply to an old posting to state whether the answer given was helpfull or not.
You still haven't learned to use the "Code" formatting tags when posting code so the code retains its original formatting.
Twice you've been given links to the Swing tutorial, but apparently you still haven't bothered to read it. There is a section on "How to Use Layout Mangers" that will help you postion your components. The tutorial is full of working examples.

How set tha table boundry and how set in panal

hi master
sir this is my table code
import javax.swing.*;
import java.awt.*;
import java.util.*;
public class fahimtable extends JApplet {
String[] columnNames = {"First Name",
"Last Name",
"Sport",
"# of Years",
"Vegetarian"};
Object[][] rdata = {
{"Mary", "Campione",
"Snowboarding", new Integer(5), new Boolean(false)},
{"Alison", "Huml",
"Rowing", new Integer(3), new Boolean(true)},
{"Kathy", "Walrath",
"Knitting", new Integer(2), new Boolean(false)},
{"Sharon", "Zakhour",
"Speed reading", new Integer(20), new Boolean(true)},
{"Philip", "Milne",
"Pool", new Integer(10), new Boolean(false)}
/** Initializes the applet fahimtable */
public void init() {
JTable table = new JTable(rdata, columnNames);
getContentPane().add(table.getTableHeader),BorderLayout.NORTH);
getContentPane().add(table);
initComponents();
private void initComponents() {
==========
sir this give me table but my need is the table in panal
now table cover the all applet
sir how set i table in panal and now i set tha table boundry and header
please give me idea
thank
aamir

Learn how to use the forum correctly. This is now your 6th posting on basically the same topic.
Not once have you bothered to reply to an old posting to state whether the answer given was helpfull or not.
You still haven't learned to use the "Code" formatting tags when posting code so the code retains its original formatting.
Twice you've been given links to the Swing tutorial, but apparently you still haven't bothered to read it. There is a section on "How to Use Layout Mangers" that will help you postion your components. The tutorial is full of working examples.

2LIS_02_ITM - Set up Table

All,
    Can we run a set up table job (LO datasources) (in case of purchasing program RMCENEUA) parallely in (R/3)production environment by checking the block documnet option with different document date in selection ?
    The reason for this is that if we go with this option we can schedule maximun set up jobs in parallel and complete the setup table fill up in few hours instead of running series of jobs with different document date...
    please provide your inputs
Thanks
Kamal

Hi kamal,
We can do parallel execution ,but we have to keep in mind
that, in case of jobs that were scheduled in parallel, we
must assign different run names by all means. If a job is
canceled (on purpose or through an exceptional situation)
it can only be restarted by means of the correct run name.
With rgds,
Anil Kumar Sharma .P

Help me with set up table error message please

Hello
I am trying to fill set up tables for application 12 in background as I try to schdule the job, I was getting the message " datasource 2lis_12_vchdr contains data still to be transfred".
I tried twice and both the time i got same message. so I schdule it for running it immediately and it was runnning for 2 hrs and after that I got the same message that " datasource 2lis_12_vchdr contains data still to be transfred".
so what does this mean ? are the set up tables already filled or I need to do someting else before filling set up tables
can you please guide where I can check the set up tables have been filled sucessfully.
I tried in RSA3 and it is showing data there but I am not sure which mode I should select to see the data and I am also not sure weather this is right place to check the data.
This is kind of urgent pl. help
I will assign full points to right answer.
Krish

Hello Thank you all for your quick replies,
can you please suggest the set up table name I have to look in se16 to see the set up table data for application 12 ??
also as I said I did not checked in RSA7 for any records and starte filling set up tables and now I have started the loading as well, is it ok as I am in dev. system and i have to repeat filling the set up tables ?
Please suggest.
note: I will assign points to all the answers
Regards
Krish

View of set up tables data in se11??????????

Hi,
can we view the data in se11 thru set up tables names? if so then how do we find set up tables names, say for example if i am using 2lis_13_VDHDR then how can i view the data apart from RSA3 after filling up of set up tables? is there any chance to view the data thru se11 and with the set up table name? and if so then how do we find set up tables name?

Hi
set up table names starts with 'MC' followed by application component '01'/'02' etc and then last digits of the datasource name and then followed by set up..
we can say the <b>communication structure</b> (R/3 side,you can check it in LBWE also) name followed by 'setup'
for your example below is the name of setup table
MC13VD0HDRSETUP
If you want to check data in set up tables you better look at the transaction NPRT here you can see the table name from which data is picking also
Hope it helps
Thanks
Teja

Vistex Set Up table content - DataSource /IRM/LIS_RM_IPBBITM

Hi Gang,
Our company is using Vistex, and we have installed the Business Content. I'm trying to initialize the delta process, but I am return no records. I am using the programs found in transaction code /IRM/IPBWSPRO to deleted and reload the set up table - still no records!
I'd like to confirm whether or not the set up tables are being filled.
Does any one know the technical name of the Vistx set up tables?
Or how to display the contents of the table?
Without an error message, it is very difficult to troubleshoot the problem.
John Hawk

Hi John,
Vistex, data sources, are provided as part of the LO Cockpit and you need to do the set up using a program, for filling set up tables and the rest is same as LO Cockpit data sources
In BW side, I dont think, we have any content delivered for Vistex Modelling. You may have to closely look at the Commission Management module which is delivered and utilise them for your BI Data Model for Billbacks. And theres going to be no issue with most of master data as the ECC ones are still in place for you Billback reports. and make sure that you set the Vistex namespace (Tx, SE06) before you go ahead for BI modelling.
Filling Setuptable :
Goto the transaction code /IRM/IPBWSPRO (Here you will fiind the Programs)to deleted and reload the set up table.
Regards
Ram.

"REORG and RUNSTATS for set of tables" job

Similar Messages

Maybe you are looking for