Repeatedly being sold faulty products from HP

Hi HP representatives,
I had bought a HP Envy X2 on 31st May. The details of the product are provided below:
Serial Number [edited Serial Number] & Product Number C8C95PA
Within a day, I found out that the product is faulty, the battery in the base would not charge no matter what I did!!
I raised a complaint (complaint#edited complaint number) and was issued a DOA (dead on arrival) status for the product. So I took the DOA and got on to get it replaced.
For this I travelled across the Bangalore city, on 7th June, in the awesome heat and infinite traffic and finally got the new unit from Devraj Infotech in Gandhinagar, Bangalore (the retailers who sold me before).
The details of new unit are provided below.
Product number C8C95P & Serial number {edited Serial Number]
But lo, while I was in the store I found out that the new unit too had the same problem!! The battery in the base would not charge (the same problem as before)!!
So, I called up the HP service center from the dealers shop itself (complaint # complaint number edited).They (the HP Service center folks) said me it is IMPOSSIBLE that the second time the product will be faulty. Also, the retailer would not replace the faulty product there and then (SINCE THE SEAL HAD BEEN BROKEN AFTERALL!!). Instead I was asked to get it diagnosed from service engineers from HP.
The service engineers from Maha Electronics, based in Indiranagar, come to diagnose the laptop and found the same problem and were again unable to rectify the problem.
I GOT A NEW DOA AGAIN!!! Yippeeeeee
I am again instructed to collect the DOA and then run to the dealer’s shop and then collect the product in a week, else the DOA will not be valid.
My Question to you
WHY ARE YOU SELLING ME FAULTY PRODUCT AGAIN AND AGAIN? (Any bad karma of mine that you know about??)
Don't i have a life to live?
Should i only spend my weekend running to your store for replacement, now that i have bought a product from you?
Could you for once brave the awesome summer heat and the endless, friendly traffic of Bangalore, spending the money on gasoline as I have (TWICE) and give me a unit that works… (Do let me know what the experience is like)
What actions will you take if the third unit too is also a faulty one? Does it mean I HAVE TO RUN ACROSS THE CITY ONE MORE TIME!!
But, I thank you for helping me improve my health (by running across the town) and increase my nation's GDP by spending my cash on useless travel (After all my cash is not important)
I had been a fan of HP and thank you for making me realize, the hard way, that it is also about undergoing an awesome product and service experience
I thank you for the valuable lessons in chicanery.
I FEEL ENLIGHTENED NOW!!
I am probably planning to go and visit the store again and roar again under the blazing summer heat with fewer dimes in my pocket and less time to spend for myself!!
Thank you & <3

Greetings!!!
I went to the store and to my delight I was handed the third defective product. A HATRICK!!
I like Lana Del Rey have managed to find my "SUMMER TIME SADNESS"
After I called up the customer service once again (from the store itself), I was informed that
This is a rare scenario!! (BUT NOT FOR ME). In my life's sample space I obtained 100% defective product from you
Guarantee of providing a well working product can never be given
Reimbursement of money, i paid for the product, is in oblivion
I will never know if any actions will be taken for the 3X glitches i faced ( Some new protocols have been initiated which are confidential)
The vendor said me that he would take care of the new complaint and get a DOA certificate. Also, with the vendor's support I got the HP Pavillion X2 (Since, i did not want to lose out on the money i paid before and did not know if HP would pay me back so that i could walk back home with the money i spent).
A good friend of mine now says me "I run more than my computer"
I am praying to God that this time the new computer works ceaselessly...

Similar Messages

SAP Best Practise. Requirement for CERTIFICATES for products being sold

Hi All
Please share is there a SAP Best Practice for using CERTIFICATES in SAP?
There is a legal requirement in Russia for products being SOLD: if product is subject to cerification, then company is now allowed to sell such product if certicate is missing or expired.
- product should be blocked for sales order/ quoatation if mandatory ceriticate is missing or expired.
Is there a SAP Best Practice for this kind of process?
Thanks in advance
Regards
Andrey

Hi
I suppose this can be achieved through DMS (Document Mangament System).
You can customize the cross plant material master settings and link it to the DMS module.
The suggesstion I am givng is very high level, but it might help you to put your thoughts in that direction.

Am I the only one that has had every charging cable (for my iPhones and my iPads) fail? Very frustrating. I got used to quality products from Apple but seems the small stuff is being overlooked nowadays.

Am I the only one that has had every charging cable (for all of my iPhones and all of my iPads) fail? Very frustrating. I got used to quality products from Apple but seems the small stuff is being overlooked nowadays!

I have yet to have a cable for my iPad 3, iPad 4 or iPhone 5 fail. I have multiple cables for each device without any failures.

I've just bought an iPad and there's a line that runs the whole length of the screen about an inch from the outside edge of the screen. Have I bought a faulty product?

I've just bought an iPad and there's a line that runs the whole length of the screen about an inch from the outside edge of the screen. Have I bought a faulty product?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

HGA7T Antenna - still being sold by Linksys?

I have a WRT54g Linksys Router. My local computer firm sold me a HGA7S antenna when I asked for a solution to some spotty wireless internet coverage in my home. I unscrewed one of the antennas in back and tried to screw in the HGA7S, but couldn't figure out how to do it. From what I have been able to tell from looking at Linksys's product page, the HGA7T is for the WRT54G because it has a TNC connector, while the HGA7S has a SMA connector. So, the 7T seems right, but my computer guy is saying that the 7S is now being sold for all models of routers (according to his Linksys sales rep). I notice that the 7T is hard to find. Is there some adopter to make the 7S work with the WRT54g?

Linksys HGA7T are compatible and commonly used for Linksys routers and access points like WRT54GS, WRT54G, WAP54G, BEFW11S4, WAP11 and it has an optional stand, AS2TNC.
On the other hand HGA7S (1 piece antenna) are compatible with wireless adapters and wireless bridge like WMP54G, WMP54GS, WET54G, WET54GS5 and also compatible with WRV54G. It has an optional stand, AS1SMA.

How can I purchase products from the app store while travelling outside my country of residence?

How can I purchase products from the app store while travelling outside my country of residence? We are from Canada, travelling in the USA and wish to buy a TV series but get a message to buy it from the Canadian store. When we tried to do this we got the same message.

According to the terms of sale, you have to be in your country of residence in order to make a purchase. I've heard of people able to make purchases outside their country and also of people being unable to do so. It appears that Apple's enforcement is not 100%.
In order to buy from the U.S. iTunes Store, you would need to have a valid billing address in the U.S., a credit card billed to that address or an iTunes Gift card purchased in the U.S. and be physically present in the U.S. at the time of purchase.
International copyright law is currently very inconvenient for the consumer.
Best of luck.

Appletv not updating podcasts - has apple sold a product then dropped support after 1 year? May 2014

appletv not updating podcasts - has apple sold a product then dropped support after 1 yera? May 2014 - None of the podcasts are being updated on appletv. Running itunes 11.2 and it shows podcasts there. Apple looks more like windows every day.

Before blaming Apple, was any troubleshooting actually attempted? If so, what was done?
Or was it simply easier to jump to conclusions?

Expired stock being picked for production order staging.

Hi all,
While picklists are being generated for production order staging, materials that are past their expiry date are being selected and allowed to be picked and confirmed. Is there a way that such expired materials can be excluded from picking?
Many thanks in advance.
Kevin.

Hi,
As mentione dby Philippe, You can make use of batch search strategy to avoid picking of expired batches be it for production or Customer delivery.
You can use LS51 transaction to setup batch search strategy WM01 (at Warehouse level) or WM02 (Warehouse / movement type). Hope you maintain classification data for your materials (023 batch class) where you maintain expiry duration and productioninformation etc. In LS51, select the appropriate batch class and maintain batch parameters as released and sort the strategy by Shelf life expiration date.
Storage type startegy search (T334T) has to be maintained accordingly.
If this helps you kindly reward your points.
thanks and regards
Varadharajan

I'm wondering about using Apple loops in music. Is it ok to do so to make music for people to hear, without it being sold. And how do you get permission to use them in music to sell?

I'm wondering about using Apple loops in music. Is it ok to do so to make music for people to hear,like on soundcloud or other websites, without it being sold. And how do you get permission to use them in music to sell?

From the LOGIC STUDIO SOFTWARE LICENSE AGREEMENT :
C. Except as otherwise indicated, you may use the Apple and third party audio file content (including, but not limited to, the Apple Loops, built-insound files, samples and impulse responses) (collectively the “Audio Content”), contained in or otherwise included with the Apple Software, on aroyalty-free basis, to create your own original soundtracks for your film, video and audio projects. You may broadcast and/or distribute your ownsoundtracks that were created using the Audio Content, however, individual Apple loops, audio files, sound settings, samples and impulse responsesmay not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, soundfiles, sound effects or music beds.
This means, you can use all Apple Loops in your music, they're royality-free.
Best,
DaCaptain

SRM 5.0 Delete product from COMM_PRODUCT

Hi,
I want to delete a product from SRM that is replicated from ECC, when I run COM_PRODUCT_DELETE_SINGLE I am getting error message ' DELETION WITHOUT ARCHIVING IS NOT ALLOWED IN PRODUCTIVE ENVIRONMENT'. Can't I delete product without archiving? Can some help me out on how to archive a product in SRM (infact, I will be archiving abt 50k).
Thanks a lot for your replies in advance.
Regards,
Shankar

Archiving is a cross application process, hence the procedures remain the same except for the Object and Tables being archived across all areas.
Please find the documentation on the same:
http://help.sap.com/saphelp_nw70/helpdata/en/ad/b594429d7c0631e10000000a1550b0/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCCA/CAARCCA.pdf
You can follow the same procedure but for the object i mentioned in my previous reply.
Hope this solves your problem.
Regards
Kathirvel

Which version of the iPad w/ cellular is being sold in China?

A family member wants to send me an iPad 4 from the USA for Christmas. I need to know which cellular version is being sold in China (where I am currently working) so that I can get service on China Unicom.
The Apple website does not specify.
Thanks for the help.

Model od iPad sold in China
http://www.apple.com.cn/ipad/compare/

Downloading Pricing condition records for products from ECC to CRM

Hi All,
I have a requirement where i need to download condition records for products from ECC to CRM. The Inputs available for me are Product Id or the material number and the Sales org data.Kindly let me know the step by step procedure that i should follow to download the condition records for the products.
Note: 1. The Products are already in the CRM system.
2. I have downloaded the adapter object "DNL_CUST_CNDALL" already.
Thanks & Regards,
Shwetha.

First of check and ensure that if the records are already downloaded. To do so,
1) Log to ECC system and go to tcode V/06
2) From here select the condition type you are looking at. Dbl click on the condition type and note down the access seq.
3) Go to V/07. seelect the access seq you obtained in previous step and dbl click on "Accesses". Here you will come to know the condition table numbers. Note down the table numbers. (example: 002, 567)
Understand at this juncture that tables from 1-500 are SAP Standard tables and 501 - 999 are customer specific tables.
1) Log to CRM system and go to se16
2) Type CNCCRMPR002 or CNCCRMPR567 and Choose F4 from keyboard.
3) you should find an entry which looks like CNCCRMPRSAP002 or CNCCRMPRCUS567.
4) query the table with input parameters like Product or Sales Org. YOu should find the records.
If you fail in step 3, it means that the table itself has not come to CRM. For this do DNL_CUST_CNDALL with OPEN client (go to SCC4 and there Dbl clik on your client. There "NO CHANGES ALLOWED" should not have been selected. If it is so, consult your basis team and explain that DNL_CUST_CNDALL should be done on open client.(Repeat this even if you have already done that)
If you fail in step4, try downloading DNL_COND_A*** adapter Objects. *** stands for the ECC condition table captured from ECC (step3)
If you still are unable to find the record in the database table level, Check for the log in SLG1 tcode in CRM system. This gives you an idea of what's wrong.
Note: Even if you maintain conditions via Product master, ultimateley it gets stored in A* tables in ECC and CNCCRMPR* tables in CRM. So the above procedure holds good for whatever the case might be.
Hope this helps
Regds,
Raghu

MacBook Pro 15" (late 2008) seems dead. Faulty product?

Hello,
I am actually not very happy right now. My MBP died yesterday morning. I closed the lid the night before, like I have been doing for 1,5 years, and the next day, I opened it and it stayed black. I heard the HDD boot up, I even added a CD to test if my keyboard was still reacting. Nothing seemed more true.
That's where the problem started. I was (and am still) getting annoyed with this. Since I'm quite sure Apple laptops, with or without warranty, should survive 1,5 years of normal yet intensive use. I think we're dealing with a faulty product here. Apple's procedures, which I am happily following, require an investigation which seem to cost me 80 euros. I've called with Apple Support and they promised me a free investigation (probably just to tell me that the Logic board is dead, which costs 800 euros if I'm correct...). Today, I tried to bring it to a service point but was told that they couldn't promise me that the research would be free... So I kept the laptop, I'm not willing to take that risk just now, and called back. Angry.
Now I have been postponed to monday, because the supervisor wasn't there.
What's your take on this? I do not feel I am being treated correctly. Anyone have any pointers or experiences that kind of match this? How did you solve this? Talk please.
Yours faithfully,
Bjorn Schijff

eww, I'd very nearly classify my MBP as 1.5 years old. I got it in early November 2008, very close to 16 months ago. In fact, I think it will be 16 months ago tomorrow.
Anyway, I think it's likely that our poster here may have a unibody MBP. Bjorn, does your MBP look like the ones at http://www.apple.com/macbookpro ? Or does it have an all-silver keyboard?
If it does not look like the current generation, then you have an older, non-unibody MBP. In that case, your problem may be covered under the special circumstances surrounding the 8600M GT graphics card in that generation of MBPs.
If it does look like the current generation, then I'm afraid you may be on the hook for the repairs. But, have you tried something simple like an SMC/PRAM reset?
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379
There is unfortunately nothing we can do if the computer fails after 1.5 years and you do not have Applecare. It is the exact same thing as with any other electronic product. If the product fails after the warranty period ends, well, sometimes it is just bad luck. I think your comments about faulty products and such are misfounded. There are hundreds of thousands (if not millions) of MBPs or Powerbooks out there that go (and have gone) 10+ years without any problems. Some do not. It is just the nature of anything electronic we buy right now.
--Travis

I have a new Mac computer that has imovie. I recently made a movie that i would like to burn to a DVD. I hear that idvd is no longer being sold. Is there software on the computer that i can use to burn a dvd or is there a recommended software to use?

I have a new Mac computer that has imovie. I recently made a movie that i would like to burn to a DVD. I hear that idvd is no longer being sold. Is there software on the computer that i can use to burn a dvd or is there a recommended software to use?

There is no really satisfactory substitute for iDVD to burn video files from iMovie.
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that comes with OS 10.7 Lion (which also omitted iWeb) or will come with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD 7, i.e. iLife version 9 onwards. You should also do this if you plan to buy a new Mac anytime soon, as stocks of iLife that include iDVD will not be available for ever.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast, which is the best software for burning anything but again does not offer the flexibility of iDVD.

Our family has multiple products from IPods, IPads, IMac, and Apple TV. However, we made a mistake when registering them so that we seem to have at least two different ITunes accounts. How do I combine them or reset the accounts to make them one?

Over the years we have purchased multiple products from IPods, IPads, to IMacs. Unfortunately, along the way, we accidentally created more than one ITunes accounts so that we can only access some songs etc on certain devices and not on others. How do we reset our devices to create one account or transfer our music to one account?

You don't. You cannot combine iTunes accounts at this time. Pick the one that you want to use and stick to that one account for all the purchases.
Before making any changes read this article - http://support.apple.com/kb/ht4627
MJ

Repeatedly being sold faulty products from HP

Similar Messages

Maybe you are looking for