Replace a typedef by a another typedef everywhere in the programHi

Hi,
I would like to replace a typedef by an other typedef because im programming an evolution and I have to had some items to the typedef but If I just modify it, it will not match with the older version and I need the older version to keep working.
So would like to know if it is possible to automatiically replace a typedef or a VI by another one everywhere in the program.
Thanks.
Olivier

One solution that may work is
1) Open all the VIs that contain the typedef you want to replace
2) Change the content of the typedef to match the other typedef
3) Use Save as to rename the typedef. Save it on top of the other typedef.
Now there are two possibilities. Either it works, or it breaks your code. So take a backup of everything before you try this. This save as functionality is at least in LV 8.0 and newer.
Tomi
Tomi Maila

Similar Messages

  • Can I replace my itunes library with another user's on the same computer?

    I just inherited a MacBook that has the previous user's iTunes library.  I'd like to use iTunes to backup my iPhone 5s without mixing my library with his.  How can I completely remove the old iTunes library before I sync my phone to this laptop?

    No. The contents of each library is tied to the Apple ID of the user.
    You need to erase the hard drive, reinstall OS X, and set up your own new account. You will need either a retail Snow Leopard DVD or the installer discs that came with the computer.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Replace one itunes account with another

    I have the itunes application downloaded on my laptop but i recently made another itunes account and i want the new one to be on the Itunes application. So i uninstalled the application thinking that if i downloaded it again it would ask me for an account. Except all it did was restore the old account. I am wondering if anyone knows how to replace one itunes account with another. If you know anything that can be useful comment.

    Store > Sign Out
    Store > Sign In
    All purchases remain tied to the account used to buy them, but you can authorize iTunes to multiple accounts and put protected content from up to five on your devices. Generally best to stick to one account if possible. More so once you get to iOS devices as managing app updates over multiple devices is a chore.
    tt2

  • Susbtitution Variables in rules file to replace a member name with another

    Hi everybody,
    Can I use substitution variables to replace a member name with another name in rules file?
    Please let me know if we can use substitution vars.
    Essbase version :11.1.2
    Thanks,
    K.as

    Are you the same guy?
    http://www.network54.com/Forum/58296/thread/1287447433/Susbtitution+Variables+in+rules+file+to+replace+a+member+name+with+another+name
    The answer is still, "No".
    Regards,
    Cameron Lackpour

  • How to replace a particular striing with another string in jtextpane

    how to get replace a particular string with another string of a jtextpane without taking the text in a variable using getText() method .

    Thanks for your answer,
    "relevant object" means for you datasources, transfer rules and transformations ?
    With the grouping option "Save for system copy" I can't take easily all datasources, and others objects
    Will I have to pick all object one by one ?
    What would be the adjustement in table RSLOGSYSMAP ? For the moment it's empty.
    Regards
    Guillaume P.

  • How to replace an audio clip by another one in a Aperture slideshow?

    Hello,
    Is it possible to replace an audio clip by another one in a slideshow in Aperture? This clip is between two other audio clips.
    Thank you

    Is it a secondary audio clip?
    Then just select and press the delete key ⌫.
    And drag a different audio clip from the Audio Browser there. The trim the clip by adjusting the start and beginning.

  • Replace one preset effect with another

    Is it possible to replace one preset effect with another withouth having to undo a prior preset effect? 
    When I used Aperture, holding down the Option key would allow me to replace one preset with another.

    Store > Sign Out
    Store > Sign In
    All purchases remain tied to the account used to buy them, but you can authorize iTunes to multiple accounts and put protected content from up to five on your devices. Generally best to stick to one account if possible. More so once you get to iOS devices as managing app updates over multiple devices is a chore.
    tt2

  • How can I remove replace my primary address to another address?

    How can I remove replace my primary address to another address? I have problem...it seems someone used my primary for their personalities and I just want to delete this primary account. Thank you in advance!

    Hi AnaMusic,
    The problem is that the button "Edit" doesn't exists at "Apple ID and Primary Email Address" section. Do you know how to make this happen? I absolutely need help!
    Apple ID and Primary Email Address

  • Replacing a Regular Expression by another

    I want to replace a regular expression by another regular expression..i.e
    if my input is : <tag>-1
    output should be : <tag-1>
    as the integer value changes for each tag I cannot hard code.I am able to match it using regular expression ">-\\d" but how do i replace it??
    Any workarounds would also be appreciated.
    Thanks in advance

    It's not totally clear what you're asking for, but it sounds like something like this:
    str = str.replaceAll("<tag>-(\\d+)", "<tag-$1>");Test it, and let me know if you have questions about what it's doing.
    Check out [http://www.regular-expressions.info] for a great regex tutorial.

  • Replacing one NIDAQPad-6016 by another

    When replacing one NIDAQPad-6016 by another one it is not possible to take over the once installed DAQmx-Tasks. Why?

    That's expected and normal behavior. As long as you don't remove the first DAQPad from MAX another DAQPad will be recognized as a different device and the driver assigns a new device ID (Dev2). You need to go to MAX and change the name if needed or you need to make your software try various device IDs until no error occurrs anymore.
    Best regards,
    Jochen Klier
    National Instruments Germany

  • Replace an iView dynamically by another one by portal navigation service

    Hi all,
    A portal page to integrate several kinds of contents is in general the best way.
    But how can you handle dynamic replacement of an iView of a page (the page contains more than one iView) by another one by using the Portal navigation service? If I navigate to the target application with mode WDPortalNavigationMode.SHOW_INPLACE, the content of the page at all is replaced by the target iView. Is there a possibility to access/replace only the desired iView of the page?
    Thanks.
    Cemal

    See for the solution the following post.
    Replace an iView dynamically by another one by portal navigating service
    Cemal

  • Replace an iView dynamically by another one by portal navigating service

    Hi all,
    A portal page to integrate several kinds of contents is in general the best way.
    But how can you handle dynamic replacement of an iView of a page (the page contains more than one iView) by another one by using the Portal navigation service of the WebDynpro Runtime? If I navigate to the target application with mode WDPortalNavigationMode.SHOW_INPLACE, the content of the page at all is replaced by the target iView. Is there a possibility to access/replace only the desired iView of the page?
    Thanks.
    Cemal

    Hi Laurent,
    this is no possible with WebDynpro except the IFRAME - UI - Element of the webdynpro. But the iframe ui-element is declared as deprecated for future releases.
    The solution is a portal component with an embedded html-iframe. The src - attribute of this iframe can be filled dynamically by the portal eventing.
    You create a dynpage as a event receiver. This fills the src-attribute of the html-iframe by the event param dataObject.
    The code below can help you:
    Create output. Called once per request.
              public void doProcessBeforeOutput() throws PageException {
                   Form myForm = this.getForm(); // get the form from DynPage
                   IPortalComponentRequest request = (IPortalComponentRequest)this.getPageContext().getRequest();
                   String Output =
                        "<iframe id='LauncheriFrame' src='' width='100%' height='100%' margin='0' padding='0' frameBorder='0'></iframe>"
                             + "<script>"
                             + "function <eventhandler>(eventObj){"
                             +"document.getElementById('LauncheriFrame').src = eventObj.dataObject;"
                             + "}"
                             + "EPCM.subscribeEvent('<namespace>', '<Eventname>', <eventhandler>);</script>";
                   this.getPageContext().write(Output);
    I hope that helps you.
    Cemal

  • Does Aus Post deliver my Iphone replacement back to me or another service??

    Hi I am just wondering. I have sent my Iphone 4 to Applecare for the repair and replace service. Will they send my replacement via Aus Post or another postal service?
    Thanks

    I cant really say if this will work or not. But you can try and see, plug in your phone to your computer and restore your phone (WARNING: this will remove all your data so back up your phone prior to this) then itll download all the software and restore your phone. Once its complete go on the phone and set up the phone (WITHOUT A BACK UP; set it up as a new iphone when it asks you). Now power off the phone and take out the sim for about 5 min and leave the phone off, then put the sim back in and power it on. If the problem keeps happening, you might need to call your carrier or go to a carrier store and get a new sim card and if the problem keeps happening then you need to go to an apple store for a replacement of the phone. Also would you mind telling me the carrier your on? This will help me be able to find more things to help you and try.

  • I just replaced my hard drive and am trying to install the Snow Leppard OS on my Mac mini using the DVD's that came with the unit. Is there a step by step procedure that will guide me through this process?

    I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.

    Prep the new drive:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option.

  • How do i download 15 photo folders to my ipad. it only lets me download one. if i try download another folder, it deletes the previous folder.

    how do i download 15 photo folders to my ipad. it only lets me download one. if i try download another folder, it deletes the previous folder.

    You need to select and sync them in one go. Photos that you sync from your computer can't be deleted directly in the Photos app, instead they are deleted by not including them in the next photo sync - so you've effectively been telling iTunes to replace the folder that you've just synced with a new folder

Maybe you are looking for