How to replace a particular striing with another string in jtextpane
how to get replace a particular string with another string of a jtextpane without taking the text in a variable using getText() method .
Thanks for your answer,
"relevant object" means for you datasources, transfer rules and transformations ?
With the grouping option "Save for system copy" I can't take easily all datasources, and others objects
Will I have to pick all object one by one ?
What would be the adjustement in table RSLOGSYSMAP ? For the moment it's empty.
Regards
Guillaume P.
Similar Messages
-
How to replace one BC template with another
I am using an existing BC template and want to change to a new template (same domain) - any thoughts on how to achieve this?
Thanks.Change a BC template to another? You can not at this stage on that same site, you would have to create a new site yourself or update everything manually
-
How to replace a current driver with another one
Hi,
currently there are two different audio drivers on my solaris 10,
pkginfo | grep 810
system SUNWad810 SUNW W1100z & W2100z Audio Drivers
system TOOLSi810 Audio Driver for Intel ICH audio controller
prtconf -D gives
pci1043,1713 (driver name: audio810)
So i guess SUNWad810 is currently used for driving the audio device. If i want to change the driver to TOOLSi810 , how can i do that?
thanks !In another thread we've already found out that the pci vendor/
device id for the sound hardware in your system is "pci8086,24c5".
To configure the system to use my audio driver (audioi810) instead
of Sun's (audio810) remove the "pci8086,24c5" -> "audio810" driver
mapping and install a mapping "pci8086,24c5" -> "audioi810":
update_drv -d -i '"pci8086,24c5"' audio810
update_drv -a -i '"pci8086,24c5"' audioi810
(Note that there are double quotes around the pci8086,24c5
string, and the "pci8086,24c5" string is enclosed in single quotes
to protect the double quotes).
Unfortunately you have to reboot to activate the new driver. This
is due to a Solaris kernel bug, the kernel does not properly clean
out all references to the old driver from kernel memory after the
"update_drv -d" command, so that the next "update_drv -a" will
tell you that the new driver "failed to attach". But after a reboot
the audioi810 driver is supposed "to attach" just fine. -
How to replace a source system with another in BW
Hello experts,
I've read many topics dealing with my customer's need, but I still can't find the solution.
My landscape is the following one :
ECC6 with DEV, QUAL and PROD
BW with DEV and PROD
BW DEV source system is ECC6 DEV, I need to change it to ECC6 QUAL
A lot of work has already been done, and I'd like not to lose it changing the source system.
Datasources are the same in ECC6 DEV and QUAL.
This is not a system or a client copy, it is really a source system switch.
The new source system is already created (both DEV and QUAL ECC6 are available in "source systems" in RSA1), and I tried to use BDLS tcode
In the "old logical system name" I choose my current source system and in "new logical system name" I choose the one I now need to use.
System answer is : "The logical system name ECC6 QUAL already exists"
Obviously I did something wrong, but can't figure what.
Is there any action to perform before BDLS ?
Any help is appreciated, and points will be given.
Guillaume P.Thanks for your answer,
"relevant object" means for you datasources, transfer rules and transformations ?
With the grouping option "Save for system copy" I can't take easily all datasources, and others objects
Will I have to pick all object one by one ?
What would be the adjustement in table RSLOGSYSMAP ? For the moment it's empty.
Regards
Guillaume P. -
Replace one itunes account with another
I have the itunes application downloaded on my laptop but i recently made another itunes account and i want the new one to be on the Itunes application. So i uninstalled the application thinking that if i downloaded it again it would ask me for an account. Except all it did was restore the old account. I am wondering if anyone knows how to replace one itunes account with another. If you know anything that can be useful comment.
Store > Sign Out
Store > Sign In
All purchases remain tied to the account used to buy them, but you can authorize iTunes to multiple accounts and put protected content from up to five on your devices. Generally best to stick to one account if possible. More so once you get to iOS devices as managing app updates over multiple devices is a chore.
tt2 -
Replacing a special character in a string with another string
Hi
I need to replace a special character in a string with another string.
Say there is a string - "abc's def's are alphabets"
and i need to replace all the ' (apostrophe) with &apos& ..which should look like as below
"abc&apos&s def&apos&s are alphabets" .
Kindly let me know how this requirement can be met.
Regards
SukumariREPLACE
Syntax Forms
Pattern-based replacement
1. REPLACE [{FIRST OCCURRENCE}|{ALL OCCURRENCES} OF]
pattern
IN [section_of] dobj WITH new
[IN {BYTE|CHARACTER} MODE]
[{RESPECTING|IGNORING} CASE]
[REPLACEMENT COUNT rcnt]
{ {[REPLACEMENT OFFSET roff]
[REPLACEMENT LENGTH rlen]}
| [RESULTS result_tab|result_wa] }.
Position-based replacement
2. REPLACE SECTION [OFFSET off] [LENGTH len] OF dobj WITH new
[IN {BYTE|CHARACTER} MODE].
Effect
This statement replaces characters or bytes of the variable dobj by characters or bytes of the data object new. Here, position-based and pattern-based replacement are possible.
When the replacement is executed, an interim result without a length limit is implicitly generated and the interim result is transferred to the data object dobj. If the length of the interim result is longer than the length of dobj, the data is cut off on the right in the case of data objects of fixed length. If the length of the interim result is shorter than the length of dobj, data objects of fixed length are filled to the right with blanks or hexadecimal zeroes. Data objects of variable length are adjusted. If data is cut off to the right when the interim result is assigned, sy-subrc is set to 2.
In the case of character string processing, the closing spaces are taken into account for data objects dobj of fixed length; they are not taken into account in the case of new.
System fields
sy-subrc Meaning
0 The specified section or subsequence was replaced by the content of new and the result is available in full in dobj.
2 The specified section or subsequence was replaced in dobj by the contents of new and the result of the replacement was cut off to the right.
4 The subsequence in sub_string was not found in dobj in the pattern-based search.
8 The data objects sub_string and new contain double-byte characters that cannot be interpreted.
Note
These forms of the statement REPLACE replace the following obsolete form:
REPLACE sub_string WITH
Syntax
REPLACE sub_string WITH new INTO dobj
[IN {BYTE|CHARACTER} MODE]
[LENGTH len].
Extras:
1. ... IN {BYTE|CHARACTER} MODE
2. ... LENGTH len
Effect
This statement searches through a byte string or character string dobj for the subsequence specified in sub_string and replaces the first byte or character string in dobj that matches sub_string with the contents of the data object new.
The memory areas of sub_string and new must not overlap, otherwise the result is undefined. If sub_string is an empty string, the point before the first character or byte of the search area is found and the content of new is inserted before the first character.
During character string processing, the closing blank is considered for data objects dobj, sub_string and new of type c, d, n or t.
System Fields
sy-subrc Meaning
0 The subsequence in sub_string was replaced in the target field dobj with the content of new.
4 The subsequence in sub_string could not be replaced in the target field dobj with the contents of new.
Note
This variant of the statement REPLACE will be replaced, beginning with Release 6.10, with a new variant.
Addition 1
... IN {BYTE|CHARACTER} MODE
Effect
The optional addition IN {BYTE|CHARACTER} MODE determines whether byte or character string processing will be executed. If the addition is not specified, character string processing is executed. Depending on the processing type, the data objects sub_string, new, and dobj must be byte or character type.
Addition 2
... LENGTH len
Effect
If the addition LENGTH is not specified, all the data objects involved are evaluated in their entire length. If the addition LENGTH is specified, only the first len bytes or characters of sub_string are used for the search. For len, a data object of the type i is expected.
If the length of the interim result is longer than the length of dobj, data objects of fixed length will be cut off to the right. If the length of the interim result is shorter than the length of dobj, data objects of fixed length are filled to the right with blanks or with hexadecimal 0. Data objects of variable length are adapted.
Example
After the replacements, text1 contains the complete content "I should know that you know", while text2 has the cut-off content "I should know that".
DATA: text1 TYPE string VALUE 'I know you know',
text2(18) TYPE c LENGTH 18 VALUE 'I know you know',
sub_string TYPE string VALUE 'know',
new TYPE string VALUE 'should know that'.
REPLACE sub_string WITH new INTO text1.
REPLACE sub_string WITH new INTO text2. -
How to replace child's face with closed eyes?
Using Aperture 3.....I have a great photo of my family, however one child's eyes are closed. How can I replace her closed eyes with another shot of the child with eyes open? I've toyed around with the adjustments and can't figure it out! Please help!
Pretty sure that you are only going to be able to do this via another application that allows you to have layers such as photoshop or gimp.
Tony -
HT204266 how can I update my app with another account?
how can I update my app with another account?
kambiz.fakhr wrote:
how can I update my app with another account?
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622 -
How do I share multiple contacts with another iPhone?
How do I share multiple contacts with another iPhone? Thanks in advance.
What do you mean share?
It is not possible to send contacts from one iPhone to another without installing an app that would support this. Bump is one such app.
There is no functionality in iOS to do this. iCloud can share contacts across multiple iDevices, but it would be ALL contacts, just just a few. -
There is no 'Save as' under the file menu. How do I save a file with another name?
Numbers help refers to the 'Save As' function in the File menu. My version (latest) does not have a 'Save As' function. How do I save a file with another name?
Ross Millard wrote:
Badunit. You have an original file and an edited file. Now you duplicate the edited file and save it with a different name. Now do you have to go and delete the changed file from which the duplicate had been made? And.... is the original still unchaned... still original?
Ross,
For the situation you describe, Apple has provided Duplicate and Revert. Use File > Duplicate to reach this menu:
Regards,
Jerry -
How to publish Motion 5 templates with another editor's Final Cut Pro x
How to publish Motion 5 templates with another editor's Final Cut Pro x
That's also simpel,
Let the Motion 5 designer deliver the map that he made. For example he made a title effect with the title "We Are Awesome Company Title" than you get that map after the head "Effects" map. So he must send that map with all the stuff in it to an editor and the editor place that map in Motion Templates -> Effects.
Restart Final Cut Pro X and there you go. -
Susbtitution Variables in rules file to replace a member name with another
Hi everybody,
Can I use substitution variables to replace a member name with another name in rules file?
Please let me know if we can use substitution vars.
Essbase version :11.1.2
Thanks,
K.asAre you the same guy?
http://www.network54.com/Forum/58296/thread/1287447433/Susbtitution+Variables+in+rules+file+to+replace+a+member+name+with+another+name
The answer is still, "No".
Regards,
Cameron Lackpour -
How to replace # or Not assigned with blank in BEx Query Output.
Hi,
While running the query through BEx Query desginer or Anlayser, I am getting # or Not assigned where there are no values.
The requirement is to "Replace # or Not assigned with a blank" in the output.
I want to know, is there any setting in BEx query desginer where we can do this. How to do this.
Please share your inputs on this. Any inputs on this would be appreciated.
Thanks,
NaveenCheck out SDN-thread: "Re: Remove 'Not assigned'" for more details
Ideas from SDN research:
"a solution i have used is to put each RKF column in a CKF colum then in each CKF use RKF + 0, the outcome is that your # should now be 0s, in the query properties you can set the option to display 0s as blank."
"try to enter a text for the blank entry in the master data maintenance of the relevant objects and set the display option for the objects to 'text'."
Threads:
SDN: How to replace # or Not assigned with blank in BEx Query Output.
SDN: Re: Remove 'Not assigned
SDN: How to replace # or (Not assigned) with blank in BEx Query Output.
SDN: Bex Analyzer : Text element system's table ?
SDN: change message in web application designer ["nonavailable" -> 136 of SAPLRRSV]
SDN: Not Assigned ["Not Assigned -> 027 of SAPLRRSV]
SDN: replacing '#'-sign for 'not assigned' in queries
SDN: # in report when null in the cube
SDN: How to replace '#' with blank when there is no value for a date field
Edited by: Thomas Köpp on Sep 13, 2010 5:20 PM -
How do I insert a section with another time signature than the one im inser
How do I insert a section with another time signature than the one im inser
Yeah I've been trying to figure this out as well, for example... my song might be 90 bpm and I want to program another track using midi but have it play at 180 bpm. The only way I've found to work around this is to write my 180 bpm part make a sample of this and then loop this into the 90 bpm song.
-
In Pages how do I save a file with another name
In Pages how do I save a file with another name?
I don't know if there is a less cumbersome way to do this (I'm still pretty new to Lion) but This is what I do - since "Save As" seems to be gone with Lion.
I create a duplicate document - then click the red button to close the document - and a dialog box pops up and asks if you want to save the changes - I change the name in there and then save the file under the new name.
You can also save the copy to the desktop - get info - and then change the name if the finder window.
I copied this from the Pages help area. These help instructions were created pre-Lion I'm sure.
Saving a Copy of a Document
If you want to make a copy of your document—to create a backup copy or multiple versions, for example—you can save the document using a different name or location. (You can also automate saving a backup version, as Automatically Saving a Backup Version of a Document describes.)
To save a copy of a document:
Choose File > Save As and specify a name and location.
The document with the new name remains open. To work with the previous version, choose File > Open Recent and choose the previous version from the submenu.
Maybe you are looking for
-
How to populate transient attribute from view object dynamically
I have three 4 tables named as "employee,event,event_progress,and checklist progress". i have created a view object using the first three tables . i ahave also created 5 transient variables in to the same view object.when i dragged the view object in
-
Ical the server responded with an error?
I keep receiving this error message: The URL encountered HTTP error 404. Make sure the URL is correct. What should I do? <Edited By Host>
-
Hello We are in the process of evaluating the Cisco ISE VMWare appliance with a view to replace our existing FreeRADIUS installation as authentication provider for our wireless network and VPN service. As a part of this we are hoping to migrate our u
-
OWB Naming Conventions and Development Standards
Hi all, I am developing a project in OWB. Could any one give me 'OWB Naming Conventions and Development Standards' document.
-
Can I use Premiere Elements templates for Encore CS6
LIke the title says.... can I use menu templates from Premiere Elements for Encore CS6? If so, does it matter what version of PRE? I've seen some templates on the web (e.g. muvipix) but don't know if I could use them in Encore. I saw somebody asked a