REPLACE function in PSP for formatting

Hi everyone,
I am coding PL/SQL server pages at the moment and am trying to produce an onscreen report.
 I was just wondering if it is possible to use the REPLACE function to replace a part of a string with the same thing but in bold?
for example, I have tried:

htp.p('<TD WIDTH="43%" valign="top" align="left">'||REPLACE(var_comments,'''TEST''',||'TEST'||')'||'</TD>'); but it isn't working. I just wanted to check it was possible and if so, where am I going wrong??

Thanks in advance!

This will work:
htp.p('<TD WIDTH="43%" valign="top" align="left">'||REPLACE(var_comments,'''TEST''',||'TEST'||')'||'</TD>');I also suggest generating your table HTML using the htp.table... procedures.

Similar Messages

Replacement function modules/method for obsolete Funtion Modules in ECC 6.0

We are working on Upgrade Project and need your help in finding the replacement Function module/ Methods for following obsolete Function Modules:
 1. GET_FIELDTAB
 2. WS_EXCEL
 3. HR_DISPLAY_BASIC_LIST
 4. LOG_SYSTEM_GET_RFC_DESTINATION
 5. HELPSCREEN_NA_CREATE
 6. TR_RELEASE_COMM
Thank in Advance.
Sarita.
Edited by: Sarita Yalamati on Mar 28, 2008 1:23 PM

Hi sarita,
for GET_FIELDTAB use 'DDIF_NAMETAB_GET'..here is sample code
CALL FUNCTION 'GET_FIELDTAB'
 EXPORTING
 LANGU = SY-LANGU
 TABNAME = C_STRUCTURE_NAME
 WITHTEXT = ' '
 TABLES
 FIELDTAB = IDFIES
 EXCEPTIONS
 INTERNAL_ERROR = 01
 NO_TEXTS_FOUND = 02
 TABLE_HAS_NO_FIELDS = 03
 TABLE_NOT_ACTIV = 04.
Replacement :
CALL FUNCTION 'DDIF_NAMETAB_GET'
EXPORTING
 TABNAME = C_STRUCTURE_NAME
ALL_TYPES = ' '
LFIELDNAME = ' '
GROUP_NAMES = ' '
UCLEN =
IMPORTING
X030L_WA =
DTELINFO_WA =
TTYPINFO_WA =
DDOBJTYPE =
DFIES_WA =
LINES_DESCR =
TABLES
X031L_TAB =
 DFIES_TAB = IDFIES
EXCEPTIONS
 NOT_FOUND = 1
 OTHERS = 2
For WS_EXCEL use GUI_DOWNLOAD.. here is sample code
CALL FUNCTION 'WS_EXCEL'
EXPORTING
 FILENAME = 'D:\FILE1.xls'
SYNCHRON = ' '
TABLES
 DATA = itab
EXCEPTIONS
 UNKNOWN_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Repalcement :
data : l_filename type string.
l_filename = 'D:\FILE1.xls'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
 FILENAME = l_filename
FILETYPE = 'ASC'
IMPORTING
FILELENGTH =
TABLES
 DATA_TAB = itab
FIELDNAMES =
EXCEPTIONS
 FILE_WRITE_ERROR = 1
 NO_BATCH = 2
 GUI_REFUSE_FILETRANSFER = 3
 INVALID_TYPE = 4
 NO_AUTHORITY = 5
 UNKNOWN_ERROR = 6
 HEADER_NOT_ALLOWED = 7
 SEPARATOR_NOT_ALLOWED = 8
 FILESIZE_NOT_ALLOWED = 9
 HEADER_TOO_LONG = 10
 DP_ERROR_CREATE = 11
 DP_ERROR_SEND = 12
 DP_ERROR_WRITE = 13
 UNKNOWN_DP_ERROR = 14
 ACCESS_DENIED = 15
 DP_OUT_OF_MEMORY = 16
 DISK_FULL = 17
 DP_TIMEOUT = 18
 FILE_NOT_FOUND = 19
 DATAPROVIDER_EXCEPTION = 20
 CONTROL_FLUSH_ERROR = 21
 OTHERS = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
EXPORTING
 DOCUMENT = 'D:\FILE1.xls'
 APPLICATION =
 PARAMETER =
 DEFAULT_DIRECTORY =
 MAXIMIZED =
 MINIMIZED =
 SYNCHRONOUS =
 OPERATION = 'OPEN'
EXCEPTIONS
 CNTL_ERROR = 1
 ERROR_NO_GUI = 2
 BAD_PARAMETER = 3
 FILE_NOT_FOUND = 4
 PATH_NOT_FOUND = 5
 FILE_EXTENSION_UNKNOWN = 6
 ERROR_EXECUTE_FAILED = 7
 SYNCHRONOUS_FAILED = 8
 NOT_SUPPORTED_BY_GUI = 9
 others = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Replace function not working for XML CLOB data

Hi all,
I am generating XML using DBMS_XMLGEN in oracle 10g. After generating the XML, I am replacing the ROW tags with appropriate tag name using REPLACE function. Sometimes the tag name is not replaced correctly.
Eg.I am replacing </Cargo_ROW> with </CargoDetail>. But sometimes in one xml, this tag is coming as </CargoDetROW> or </CargoDetaiW>. The XML size is always huge and the same tag is repeated so many time in the loop and in the same XML, only one tag will be replaced incorrectly. This also not happening for all XMLs.
If any one knows the cause about this problem or solution, please share the same.
thanks,

Yes Anton, you are right..
It was typecasting problem
replace supports clob
Check this out
SQL> declare
2 xmldata clob;
3 Begin
4 xmldata:='<Message transaction_log_id="" extraction_date="25/11/09 09:52:03 AM" versio
5 <Transaction>
6 <TransactionType>ORIGINAL</TransactionType>
7 <ControlNumber>60022449779</ControlNumber>
8 <BookingHeader>
9 <PortCodeOriginal>GBSOU</PortCodeOriginal>
10 <Contact>.</Contact>
11 <PhoneContact>.</PhoneContact>
12 </BookingHeader>
13 <PartyInformation>
14 <PartyDetails>
15 <PartyId>10002866</PartyId>
16 <Type>SHIP</Type>
17 <Name1>L LTD.</Name1>
18 </PartyDetails>
19 </PartyInformation>
20 <Cargo>
21 <CargoDetROW>
22 <CargoHeader>
23 <CargoReceivedSeqNo>600015391790</CargoReceivedSeqNo>
24 <CargoId>RW9330P013948</CargoId>
25 </CargoHeader>
26 <CargoDimensions>
27 <Length>1</Length>
28 <Width>2</Width>
29 </CargoDimensions>
30 </CargoDetail>
31 <CargoDetROW>
32 <CargoHeader>
33 <CargoReceivedSeqNo>600015391791</CargoReceivedSeqNo>
34 <CargoId>RW9330P01394AA</CargoId>
35 </CargoHeader>
36 <CargoDimensions>
37 <Length>2</Length>
38 <Width>2</Width>
39 </CargoDimensions>
40 </CargoDetail>
41 <Cargo_ROW>
42 <CargoHeader>
43 <CargoReceivedSeqNo>600015391792</CargoReceivedSeqNo>
44 <CargoId>RW9330P01322</CargoId>
45 </CargoDetaiW>
46 <CargoDimensions>
47 <Length>1</Length>
48 <Width>2</Width>
49 </CargoDimensions>
50 </Cargo_ROW>
51 </Cargo>
52 </Transaction>
53 </Message>';
54 xmldata:=to_clob(regexp_replac(xmldata,'</Cargo_ROW>|</CargoDetaiW>|</CargoDetROW>','</CargoDetail'));
55 xmldata:=to_clob(regexp_replace(xmldata,'<Cargo_ROW>|<CargoDetaiW>|<CargoDetROW>','<CargoDetail>'));
56 dbms_output.put_line(xmldata);
57 end;
58 /
<Message transaction_log_id="" extraction_date="25/11/09 09:52:03 AM"
version="1.0">
<Transaction>
<TransactionType>ORIGINAL</TransactionType>
<Contro
lNumber>60022449779</ControlNumber>
<BookingHeader>
<PortCodeOriginal>GBSOU</Por
tCodeOriginal>
<Contact>.</Contact>
<PhoneContact>.</PhoneContact>
</BookingHead
er>
<PartyInformation>
<PartyDetails>
<PartyId>10002866</PartyId>
<Type>SHIP</Ty
pe>
<Name1>L
LTD.</Name1>
</PartyDetails>
</PartyInformation>
<Cargo>
<CargoDetail>
<CargoHea
der>
<CargoReceivedSeqNo>600015391790</CargoReceivedSeqNo>
<CargoId>RW9330P01394
8</CargoId>
</CargoHeader>
<CargoDimensions>
<Length>1</Length>
<Width>2</Width>
</CargoDimensions>
</CargoDetail>
<CargoDetail>
<CargoHeader>
<CargoReceivedSeq
No>600015391791</CargoReceivedSeqNo>
<CargoId>RW9330P01394AA</CargoId>
</CargoHe
ader>
<CargoDimensions>
<Length>2</Length>
<Width>2</Width>
</CargoDimensions>
<
/CargoDetail>
<CargoDetail>
<CargoHeader>
<CargoReceivedSeqNo>600015391792</Carg
oReceivedSeqNo>
<CargoId>RW9330P01322</CargoId>
</CargoDetail>
<CargoDimensions>
<Length>1</Length>
<Width>2</Width>
</CargoDimensions>
</CargoDetail>
</Cargo>
</Transaction>
</Message>
PL/SQL procedure successfully completed.
SQL> Twinkle
Edited by: Twinkle on Nov 26, 2009 6:05 PM

Replace function in xslt for BPEL 2.0

Hi,
We have a requirement where special characters (e.g. \, ., &, @) will be replaced with ' ' . As the position of the special characters are not fixed, I believe I won't be able to do it by substring function.
Got some link suggesting this <xsl:value-of select="replace(description, '\n', '')" disable-output-escaping="yes" /> with <xsl:stylesheet> ='2.0' but its not working for me. I would appreciate your help .Thanks in advance.
Source: 65\Road No.1,Glasgow,Scotland
Required o/p: 65 Road No 1 Glasgow Scotland
Thanks,
Abhishek

when i test the replace in xmlspy it works, maybe you forgot to escape all the "special" characters which need to be replaced ?
xslt tested in xmlspy
[code]
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:fn="http://www.w3.org/2005/xpath-functions">
<xsl:template match="/">
<xsl:variable name="test" select="string('65\Road No.1,Glasgow,Scotland')"/>
<root>
<debug1>
<xsl:value-of select="$test"/>
</debug1>
<xsl:variable name="debug2" select="replace($test,'\\',' ')"/>
<debug2>
<xsl:value-of select="$debug2"/>
</debug2>
<xsl:variable name="debug3" select="replace($debug2,'\.',' ')"/>
<debug2>
<xsl:value-of select="$debug3"/>
</debug2>
<xsl:variable name="debug4" select="replace($debug3,'\,',' ')"/>
<debug2>
<xsl:value-of select="$debug4"/>
</debug2>
</root>
</xsl:template>
</xsl:stylesheet>
[/code]
output
[code]
<root xmlns:fn="http://www.w3.org/2005/xpath-functions" xmlns:fo="http://www.w3.org/1999/XSL/Format" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<debug1>65\Road No.1,Glasgow,Scotland</debug1>
<debug2>65 Road No.1,Glasgow,Scotland</debug2>
<debug2>65 Road No 1,Glasgow,Scotland</debug2>
<debug2>65 Road No 1 Glasgow Scotland</debug2>
</root>
[/code]

Function module used for formatting alv

hi gurus,
which function module is uesd to format alv?

Hi
see the following
ABAP List Viewer
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
Check the program in the following link:
http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
15. ALV output to PDF conversion
It has an example code for PDF Conversion.
http://www.erpgenie.com/abap/code/abap51.htm
converting the output of alv in pdf
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Regards
Anji

Issue for using replace or substring function in OBIEE for Essbase.

Hello,
We are Getting data from essbase cubes. I am trying to take out a part of characters from a data in a column. When i was trying to you replace function directly in a report, if i use the logic for only that column its work well. But when i was trying to add metric column to that report then i am getting this error.
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 42043] An external aggregate is found in an outer query block. (HY000)
SQL Issued: SELECT REPLACE("CLIN OIC"."Gen2,CLIN OIC", '_CLIN_OIC', ' ') saw_0, Revenue."Job Profit" saw_1 FROM RADAR ORDER BY saw_0
Kindly help me to fix this issue and share you suggestions.

Hello,
We are Getting data from essbase cubes. I am trying to take out a part of characters from a data in a column. When i was trying to you replace function directly in a report, if i use the logic for only that column its work well. But when i was trying to add metric column to that report then i am getting this error.
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 42043] An external aggregate is found in an outer query block. (HY000)
SQL Issued: SELECT REPLACE("CLIN OIC"."Gen2,CLIN OIC", '_CLIN_OIC', ' ') saw_0, Revenue."Job Profit" saw_1 FROM RADAR ORDER BY saw_0
Kindly help me to fix this issue and share you suggestions.

Replace function - only for characters?

When I'm using the replace function below, I get an error message stating:
replace(char,char) in java.lang.String cannot be applied to (java.lang.String,java.lang.String)
Does anyone know why this happening? Shouldn't this function work for strings? My JSP is below, thanks in advance!
<%= request.getParameter("overrides")%>

<% String message = request.getParameter("overrides"); %>
<%= message %>
<% message = message.replace("WRKS_FULL_DAY","Full Day Timecode"); %>
<%= message %>

Some examples of how to do it:
import java.util.*;
public class newT {
 public static void main(String[] args) {
 String targetString = "Hello, Hello, Goodbye,";
 String results = targetString.replaceAll(",", "\n");
 System.out.println(">>" + results + "<<");
 String x = System.getProperty("line.separator");
 String resultsx = targetString.replaceAll(",", x);
 System.out.println(">>" + resultsx + "<<");
 String[] strArray = targetString.split(",");
 String results2 = strArray[0];
 if ( strArray.length > 1) {
 for (int i =1; i < (strArray.length); i++) {
 results2 = results2 + "\n" + strArray;
if (targetString.endsWith(",")) {
 results2 = results2 + "\n";
 System.out.println(">>" + results2 + "<<");

Does Logic Pro X include replacement functionality for Compressor, Soundtrack Pro and Waveburner from Logic Studio 9?

Does Logic Pro X include replacement functionality for Compressor, Soundtrack Pro and Waveburner from Logic Studio 9?

No.. You can buy the Compressor (along with Mainstage) via the App Store as a separate download but STP and Waveburner are discontinued products. Some of STP's functionality can now be found in Final Cut Pro X...
Note: Mainstage, Compressor, Waveburner and STP were part of the full version of Logic Studio 2.0 (which also included Logic Pro 9 ) and sold for $999 compared to Logic Pro X which retails at $200...
The Apple loops/Jam packs that came as part of Logic Studio 2.0 now come free with Logic Pro X (and did so with the Appe store version of Logic Pro 9) .. as part of the additional downlaod

Replace function for HTML tags

Hie Guys,
I would like to get rid of the HTML tags from a column/object in my report using the "Replace" function. Basically, I want to replace whatever the content is between "<" & ">" i.e. the opening and closing tags. I know I can use the "Pos" function to identify the position of "<" & ">", but I am not sure exactly how to achieve this in Webi. FYI - "Read content as HTML" & "Read content as Hyperlink" did not resolve the issue. Can anyone please help? Thanks.

Hi Jeewan,
It will be very tedious to do this at Webi level.
I have tried below example. It might help you to work around your issue; however, not completely:
1. Created an Excel and inserted single value in first column as:
<html>this is yuvraj</html>
2. Used it as source and created a Webi report in Rich client.
3. Applied SubStr recursively using Pos function and created below variables:
test : =Substr([column_1]; Pos([column_1];">")+1;Length([column_1]))
test1: =Substr([test]; Pos([test];">")+1;Length([test]))
test2 : =Substr([test1]; 0;Pos([test1];"<")-1)
The output has been attached.

[8i] Help with function with parameters (for workday calculation)

Let me start by saying, I've never written a function before, and I don't have access to create a function in my database (i.e. I can't test this function). I'm trying to come up with a function that I can ask my IT department to add for me. I'm hoping someone can take a look at what I've written and tell me if it should work or not, and if this is the right way to go about solving my problem.
I am trying to create a function to do a very simple workday calculation (adding/subtracting a particular number of workdays from a calendar date).
The database I'm working with has a table with the workday calendar in it. Here is a sample table and sample data, representative of what's in my workday calendar table:
CREATE TABLE caln
( clndr_dt DATE,
 shop_days NUMBER(5)
 CONSTRAINT caln_pk PRIMARY KEY (clndr_dt)
INSERT INTO caln
VALUES (To_Date('01/01/1980','mm/dd/yyyy'),0);
INSERT INTO caln
VALUES (To_Date('01/02/1980','mm/dd/yyyy'),1);
INSERT INTO caln
VALUES (To_Date('01/03/1980','mm/dd/yyyy'),2);
INSERT INTO caln
VALUES (To_Date('01/04/1980','mm/dd/yyyy'),3);
INSERT INTO caln
VALUES (To_Date('01/05/1980','mm/dd/yyyy'),3);
INSERT INTO caln
VALUES (To_Date('01/06/1980','mm/dd/yyyy'),3);
INSERT INTO caln
VALUES (To_Date('01/07/1980','mm/dd/yyyy'),4);
INSERT INTO caln
VALUES (To_Date('01/08/1980','mm/dd/yyyy'),5);
INSERT INTO caln
VALUES (To_Date('01/09/1980','mm/dd/yyyy'),6);
INSERT INTO caln
VALUES (To_Date('01/10/1980','mm/dd/yyyy'),7);
INSERT INTO caln
VALUES (To_Date('01/11/1980','mm/dd/yyyy'),8);
INSERT INTO caln
VALUES (To_Date('01/12/1980','mm/dd/yyyy'),8);
INSERT INTO caln
VALUES (To_Date('01/13/1980','mm/dd/yyyy'),8);
INSERT INTO caln
VALUES (To_Date('01/14/1980','mm/dd/yyyy'),9);The actual table includes from 1/1/1980 though 12/31/2015.
I've written (and validated) this parameter query which does my workday (mday) calculation:
SELECT cal.clndr_dt
FROM CALN cal
 SELECT cal.shop_days+:mdays AS new_shop_days
 FROM CALN cal
 WHERE cal.clndr_dt =:start_date
 ) a
WHERE cal.shop_days = a.new_shop_days
AND ROWNUM =1
ORDER BY cal.clndr_dt;Based on this query, I've created the following function (and I have no clue if it works or if the syntax is right, etc.):
CREATE OR REPLACE FUNCTION add_mdays
 (start_date IN DATE,
 mdays IN NUMBER(5))
RETURN DATE
IS
 new_date DATE;
BEGIN
 SELECT cal.clndr_dt
 FROM CALN cal
 SELECT cal.shop_days+mdays AS new_shop_days
 FROM CALN cal
 WHERE cal.clndr_dt =start_date
 ) a
 WHERE cal.shop_days = a.new_shop_days
 AND ROWNUM =1
 ORDER BY cal.clndr_dt;
 RETURN new_date;
END add_mdays; //edit 9:31 AM - noticed I left off this bitI'm also not sure how to have the function handle results that would return a date outside of the date range that is in the table (Before 1/1/1980 or after 12/31/2015--or, another way to look at it is, before the MIN value of caln.clndr_dt or after the MAX value of caln.clndr_dt).
My goal is to be able to use the function in a situation like the following:
First, here's a sample table and data:
CREATE TABLE orders
( ord_no NUMBER(5),
 plan_start_dt DATE,
 CONSTRAINT orders_pk PRIMARY KEY (ord_no)
INSERT INTO orders
VALUES (1,To_Date('01/08/1980','mm/dd/yyyy'));
INSERT INTO orders
VALUES (2,To_Date('01/09/1980','mm/dd/yyyy'));
INSERT INTO orders
VALUES (3,To_Date('01/10/1980','mm/dd/yyyy'));And here is how I would like to use my function:
SELECT orders.ord_no
, orders.plan_start_dt
, add_mdays(orders.plan_start_dt, -3) AS prep_date
FROM ordersThus, the function would allow me to return, for every order in my orders table, the date that is 3 workdays (mdays) prior to the plan start date of each order.
Am I going about this the right way? Do I need to create a function to do this, or is there a way for me to incorporate my query (that does my mday calculation) into the sample query above (eliminating the need to create a function)?
Thanks much in advance!
Edited by: user11033437 on Feb 2, 2010 8:55 AM
Fixed a couple typos in the last insert statements
Edited by: user11033437 on Feb 2, 2010 9:31 AM (fixed some syntax in the function)

Hi,
Ah, mentioning Oracle 8 and not being able to test your own code makes me nostalgic for the good old days, when you typed your cards, and brought them to a window at the computer center, and waited an hour for the job to run, and then saw the printout to find that you had made a typo.
If you're going to write functions, you really need to test them yourself. Like all code, functions whould be written in baby steps: write a line or two (or sometimes just part of what will later become one line), test, make sure it's running correctly, and repeat.
Ideally, your employer should create a developement schema in a development database for you to use.
You can legally download your own instance of Oracle Express Edition for free; just be careful not to use features that aren't available in the database where the code will be deployed.
You don't need a function to get the results you want:
SELECT o.ord_no
, o.plan_start_dt
, MIN (e.clndr_dt) AS prep_date
FROM orders o
, caln l
, caln e
WHERE l.clndr_dt = o.plan_start_dt
AND e.shop_days = l.shop_days - 3
GROUP BY o.ord_no
, o.plan_start_dt
;This would be more efficient (and a little simpler) if you added a column (let's call it work_day) that identified if each row represented a work_day or not.
For each value of shop_days, exactly 1 row will be marked as a work day.
Then the query might be something like:
SELECT o.ord_no
, o.plan_start_dt
, e.clndr_dt AS prep_date
FROM orders o
, caln l
, caln e
WHERE l.clndr_dt = o.plan_start_dt
AND e.shop_days = l.shop_days - 3
AND e.work_day = 1
;You could use the analytic LAG function to populate the work_day column.
A function would certainly be handy, though perhaps slower.
The function you posted has a few mistakes:
(a) An argument can't be declared as NUMBER (5); just NUMBER.
(b) When you SELECT in PL/SQL, like you're doing, you have to SELECT INTO some variable to hold the results.
(c) ROWNUM is arbitrary (which makes it useless in this problem) unless you are drawing from an ordered sub-query. I don't think you can use ORDER BY in sub-queries in Oracle 8. Use the analytic ROW_NUMBER function instead.
(d) The function must end with an END statement.
Given your current caln table, here's how I would write the function:
CREATE OR REPLACE FUNCTION add_mdays
 ( start_date IN DATE DEFAULT SYSDATE,
 mdays IN NUMBER DEFAULT 1
RETURN DATE
DETERMINISTIC
IS
 -- add_mdays returns the DATE that is mdays working days
 -- after start_date. (If mdays < 0, the DATE returned
 -- will be before start_date).
 -- Work days do not include Saturdays, Sundays or holidays
 -- as indicated in the caln table.
 new_date DATE; -- to be returned
BEGIN
 SELECT MIN (t.clndr_dt)
 INTO new_date
 FROM caln f -- f stands for "from"
 , caln t -- t stands for "to"
 WHERE f.clndr_dt = TRUNC (start_date)
 AND t.shop_days = f.shop_days + TRUNC (mdays)
 RETURN new_date;
END add_mdays;
SHOW ERRORSProduction code whould be robust (that includes "idiot-proofing").
Try to foresee what errors people might make in calling your function, and correct for them when possible.
For example, if it only makes sense for start_date to be midnight, or mdays to be an integer, then use TRUNC in the function in case soembody passes a bad value.
Allow for default arguments.
Comment your function. Put all comments within the function (that is, after CREATE and before the final END) so that they will be kept in the data dictionary.
If, given the same arguments, the function always returns the same value, mark it as DETERMINISTIC, for efficiency. This means the system may remember values passed back rather than call the function every time it is told to.
I wish I could mark questions as "Correct" or "Helpful"; you'd get 10 points for sure.
You posted CREATE TABLE and INSERT statements (without even being begged).
You gave a clear description of the problem, including desired results.
The code is nicely formatted and easy to read.
All around, one of the most thoughtful, well-written questions I've seen.
Well done! Keep up the good work!
Edited by: Frank Kulash on Feb 2, 2010 1:10 PM
Added my own version of the function.

Replace function is missing

I have a BO Webi user who is unable to perform the Replace function. She is able to schedule the report. But, if she wants to change the scheduler by replacing the new time interval, the Replace function doesn't appear. We go into History, click on Action, and click on Reschedule, and there's no Replace appearing in the list (Instance Title, Recurrence, Format & Destination, Caching, Events, Scheduling Server Grou). Replace is missing from the original report scheduled. Does anyone know why? Do I (designer) have to enable some permission on the CMC for this user?
Thanks.

It is authorization issue.
check with your admin.
Bashir Awan

PLD String Replace Function?

Hello Experts,
I would like to use the Sum in Words option in the field properties Format tab. However, I would like to have this in a language for which there is no LRF.
I have read all the various Sum in Words/Amount in Words threads I can find but I have no special locale based requirements (lacs etc). The default answer seems to be to prepare a FMS query and attach it to a UDF, then pull the variable into PLD.
Rather than rewriting the functionality, it would be far easier for me to use a series of Replace functions (the structure of Turkish for amount in words is exactly the same as English and translating each word (One, Two... Ten, Twenty... etc) with a Replace would solve my problem.
Looking at the documentation for PLD, I can see no prebuilt Replace function - is there any way this can be achieved?
If not, is there any Sum in Words function in B1 queries so I can at least do the replace there rather than writing an entire convert to words query?
Thank you.

Wasn't able to force a string replace - had to hex edit the LRF instead. Quick and dirty, but it works.

XSL Replace Function

Hi all
I'm trying to convert an xml document from one format to another format.I'm writing a stylesheet for this.I'm kind of new to XSLT.What I want is to replace a string with another only if exact match occurs for eg:
if i'm looking for the string "input" in the document it should replace only input variable in the following string but not "input_array".
<function_code>
y = input_array[0];
yp = 0;
time_previous = time_array[0];
result_array[0] = y;
for (int i = 1; i < channel_size; ++i) {
 double input = input_array;
 double time = time_array[i];
 double h = time - time_previous;
 double k = h/2.0;
 double A = k*(omega_sq*input - 2*zeta*omega*yp - omega_sq*y); //k*calculate_ypp( time, y, yp, input );
 double Beta = k*(yp + A/2.0);
 double B = k*(omega_sq*input - 2*zeta*omega*(yp+A) - omega_sq*(y+Beta)); //B = k*calculate_ypp(time+k, y+Beta, yp+A, input);
 double C = k*(omega_sq*input - 2*zeta*omega*(yp+B) - omega_sq*(y+Beta)); //C = k*calculate_ypp(time+k, y+Beta, yp+B, input);
 result_array[i] = C;
} </function__code>
,the replace function XSLT provides replaces all occurrences of input i.e input followed by anything.Is there a way to do it??
thanks for your time and valuable inputs.
Sree

Hi
I wrote my own functions to check for the exact match and replace but i have another issue,since there is no variable reassignment in xslt how should i implement something like this
replace_code = replace_all_names(oldname,newname,replace_code);
where replace_code consists my code replaced and once any replacement occurs i have to pass it as an input for the next replacement.
thanks
Sree

Replace() function doesn't work in Application Designer?

I'm using PeopleSoft Application Designer 8.51. I'm trying to do a simple Replace function so I can escape single quotes rather than allow them to blow up the sql query.
&deptid = Replace(&deptid, "'", "''");
App Designer chokes when I hit Save: "Invalid function parameter type. (2,19)"
According to the docs I'm using this correctly: http://docs.oracle.com/cd/E26239_01/pt851h3/eng/psbooks/tace/book.htm?File=tace/htm/tace14.htm#H4095
Even if I try to execute the example right out of the documentation, I get the same error: REPLACE("StringFun", "Fun", "Number");
Is this a bug in app designer? REPLACE is a super common thing, it's not something obscure. How can this not work?
Thanks in advance.

I figured this out. “Replace” is a strange duck function that relies on offsets. “Substitute” is the magic I needed, works just like I was expecting Replace to work. The documentation I was reading on Replace was for “ PeopleSoft Analytic Calculation Engine” rather than peoplecode. I’ll pay closer attention to that next time. Maybe this will help someone else...

Will Apple replace my Logic Board for free?

Sounds crazy I know. But I read a bunch of different threads on many sites saying they replace it for free and some say they don't. Let me explain why I believe I shouldn't pay to get this repaired. Since I bought my MBP I've had problems from it. When I got it I kept getting the message saying...you need to restart your computer...otherwise known as a Kernal Panic. I took it to apple , they couldn't find the problem so they replaced the hard drive for free. This didn't fix the problem but I did not feel like having to continue to take my computer to apple because I do all of my work on my computer so I really didn't the time and I just worked around it. Just recently my computer has began to shut off randomly while using certain programs such as Chrome and Apple Motion. After putting a thread on here I've learned that this is a kernel panic once again but being caused by the logic board. Now I don't know if I received a faulty computer but day one I've been having these problems. Which is the reason I'm asking will Apple repair what wasn't caused by the user?
I need to add that I love Apple and their products, I've had and have many computers and other devices from them that function flawlessly. This MacBook Pro is the only thing I'm having a problem with.
Thanks for any help that anyone one can provide.

Took me a little bit to get this posted becuase i just had another kenrmal panic, but here it is.
Interval Since Last Panic Report: 98600 sec
Panics Since Last Report:          4
Anonymous UUID:                    C77BF78C-FFD1-4EB6-A92F-B6B2D541D97A
Fri May 17 15:33:10 2013
panic(cpu 1 caller 0xffffff7f80966007): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff809faaf000 0x0a5480a2, D0, P3/4
Backtrace (CPU 1), Frame : Return Address
0xffffff807bbe3290 : 0xffffff8000220792
0xffffff807bbe3310 : 0xffffff7f80966007
0xffffff807bbe33a0 : 0xffffff7f80a5eb83
0xffffff807bbe3400 : 0xffffff7f80a5ebf7
0xffffff807bbe3470 : 0xffffff7f80d60855
0xffffff807bbe35b0 : 0xffffff7f80a82ddd
0xffffff807bbe35e0 : 0xffffff7f8096fd6a
0xffffff807bbe3690 : 0xffffff7f8096b43c
0xffffff807bbe3880 : 0xffffff7f8096bebe
0xffffff807bbe3970 : 0xffffff7f81e97617
0xffffff807bbe39c0 : 0xffffff7f81e97a90
0xffffff807bbe3a00 : 0xffffff7f81e96289
0xffffff807bbe3a30 : 0xffffff7f81e41e70
0xffffff807bbe3a50 : 0xffffff7f81e62584
0xffffff807bbe3a80 : 0xffffff7f81e62311
0xffffff807bbe3ad0 : 0xffffff7f81e622c9
0xffffff807bbe3b20 : 0xffffff7f81e62646
0xffffff807bbe3b40 : 0xffffff7f81e849bc
0xffffff807bbe3b70 : 0xffffff8000656494
0xffffff807bbe3be0 : 0xffffff80006567fc
0xffffff807bbe3c40 : 0xffffff8000656fbb
0xffffff807bbe3d80 : 0xffffff80002a3f08
0xffffff807bbe3e80 : 0xffffff8000223096
0xffffff807bbe3eb0 : 0xffffff80002148a9
0xffffff807bbe3f10 : 0xffffff800021bbd8
0xffffff807bbe3f70 : 0xffffff80002aef10
0xffffff807bbe3fb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 ff000->0xffffff7f80bfafff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f808ed000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f808b4000
         com.apple.nvidia.nv50hal(7.3.2)[38ACBB3D-4E3C-3883-9A4B-67F15592905F]@0xffffff7 f80bfb000->0xffffff7f80f1dfff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 ff000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
         com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81e410 00->0xffffff7f81f03fff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 ff000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f808ed000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f808b4000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 1670784702284
last loaded kext at 831289902843: com.xvx.XVXDevice          1.5.2 (addr 0xffffff7f80795000, size 65536)
last unloaded kext at 333662557290: com.apple.driver.AppleUSBUHCI          5.1.0 (addr 0xffffff7f81759000, size 65536)
loaded kexts:
com.xvx.XVXDevice          1.5.2
com.digidesign.iokit.DigiIO          8.0.3f1
com.digidesign.iokit.DigiDal          8.0.3f1
com.apple.driver.AppleIntelProfile          85.2
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.2.5a5
com.apple.driver.AppleMikeyDriver          2.2.5a5
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AGPM          100.12.75
com.apple.driver.AppleIntelHDGraphics          7.3.2
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleIntelHDGraphicsFB          7.3.2
com.apple.driver.AppleSMCPDRC          5.0.0d8
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.3
com.apple.GeForce          7.3.2
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.driver.AppleMuxControl          3.1.33
com.apple.driver.ApplePolicyControl          3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.AppleUSBTCButtons          227.6
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
com.apple.driver.AppleUSBTCKeyboard          227.6
com.apple.driver.AppleIRController          312
com.apple.driver.AppleUSBCardReader          3.0.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.SCSITaskUserClient          3.2.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.iokit.IOAHCIBlockStorage          2.1.0
com.apple.driver.AppleUSBHub          5.1.0
com.apple.driver.AppleFWOHCI          4.9.0
com.apple.driver.AirPort.Brcm4331          561.7.22
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
com.apple.driver.AppleAHCIPort          2.3.1
com.apple.driver.AppleUSBEHCI          5.1.0
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.4
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.driver.AppleProfileTimestampAction          85.2
com.apple.driver.AppleProfileThreadInfoAction          85.2
com.apple.driver.AppleProfileRegisterStateAction          85.2
com.apple.driver.AppleProfileReadCounterAction          85.2
com.apple.driver.AppleProfileKEventAction          85.2
com.apple.driver.AppleProfileCallstackAction          85.2
com.apple.iokit.AppleProfileFamily          85.2
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.2.5a5
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.iokit.IOAudioFamily          1.8.6fc18
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleHDAController          2.2.5a5
com.apple.iokit.IOHDAFamily          2.2.5a5
com.apple.driver.AppleGraphicsControl          3.1.33
com.apple.driver.AppleSMC          3.1.3d10
com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.nvidia.nv50hal          7.3.2
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.IOPlatformPluginFamily          5.1.1d6
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.NVDAResman          7.3.2
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
com.apple.iokit.IOBluetoothFamily          4.0.8f17
com.apple.driver.AppleUSBMultitouch          230.5
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.1
com.apple.iokit.IOUSBMassStorageClass          3.0.3
com.apple.driver.AppleUSBMergeNub          5.1.0
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IOFireWireFamily          4.4.8
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IOEthernetAVBController          1.0.1b1
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IOUSBFamily          5.1.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.9
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.53 GHz, 4 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 5
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 7
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3

REPLACE function in PSP for formatting

Similar Messages

Maybe you are looking for