Replacing  iPad with a later version

When upgrading your ipad to a later model, does the upload remember all the settings in the apps
our do you have to go in and reset set everything

Settings should all be carried over, if you backup your original iPad and then select "restore from back up" instead of "set up as new iPad" for the new iPad. Not every app has done this perfectly, however - magazine apps and comic book apps, that require seperate downloads, required me to redownload all issues. A few other apps also required a new set-up, but most did not.

Similar Messages

  • I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    Hi, M_ghaderi.  
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • An error occurred during local report processing.The definition of the report '' is invalid.The definition of this report is not valid or supported by this version of Reporting Services. he report definition may have been created with a later version of R

    Hi,
    I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
    ' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
      m_fields = NewArrayList()
      Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
          m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
      Next i
      'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
      stream = File.OpenWrite("D:\MyTestReport2.rdlc")
      Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
      ' Causes child elements to be indented
      writer.Formatting = Formatting.Indented
      ' Report element
      writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
      writer.WriteStartElement("Report")
      writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
      writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
      writer.WriteStartElement("ReportSections")
      writer.WriteStartElement("ReportSection")
      writer.WriteElementString("Width", "11in")
      writer.WriteStartElement("Body")
      writer.WriteElementString("Height", "5in")
      writer.WriteStartElement("ReportItems")
      writer.WriteStartElement("Tablix")
      writer.WriteAttributeString("Name", Nothing, "Tablix1")
      writer.WriteElementString("Top", ".5in")
      writer.WriteElementString("Left", ".5in")
      writer.WriteElementString("Height", ".5in")
      writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
      writer.WriteStartElement("TablixBody")
      ' Tablix Columns
      writer.WriteStartElement("TablixColumns")
      ForEach fieldName In m_fields
          writer.WriteStartElement("TablixColumn")
          writer.WriteElementString("Width", "1.5in")
          writer.WriteEndElement() ' TableColumnNext fieldName
      writer.WriteEndElement() ' TablixColumns' Header Row
      writer.WriteStartElement("TablixRows")
      writer.WriteStartElement("TablixRow")
      writer.WriteElementString("Height", ".25in")
      writer.WriteStartElement("TablixCells")
      ForEach fieldName In m_fields
          writer.WriteStartElement("TablixCell")
          writer.WriteStartElement("CellContents")
          writer.WriteStartElement("Textbox")
          writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
          ' writer.WriteAttributeString("CanGrow",  True)' writer.WriteAttributeString("Keeptogether", True)
          writer.WriteStartElement("Paragraphs")
          writer.WriteStartElement("Paragraph")
          writer.WriteStartElement("TextRuns")
          writer.WriteStartElement("TextRun")
          writer.WriteElementString("Value", fieldName)
          writer.WriteStartElement("Style")
          writer.WriteElementString("TextDecoration", "Underline")
          writer.WriteElementString("PaddingTop", "0in")
          writer.WriteElementString("PaddingLeft", "0in")
          writer.WriteElementString("LineHeight", ".5in")
          ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
          writer.WriteEndElement() ' Style
          writer.WriteEndElement() ' TextRun
          writer.WriteEndElement() ' TextRuns
          writer.WriteEndElement() ' Paragraph
          writer.WriteEndElement() ' Paragraphs
          writer.WriteEndElement() ' TexBox
          writer.WriteEndElement() ' CellContents
          writer.WriteEndElement() ' TablixCellNext
      writer.WriteEndElement() ' TablixCells
      writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows          Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows")         Since Rows tag in header is not closed not need to open fresh tag
      writer.WriteStartElement("TablixRow")
      writer.WriteElementString("Height", ".25in")
      writer.WriteStartElement("TablixCells")
      ForEach fieldName In m_fields
          writer.WriteStartElement("TablixCell")
          writer.WriteStartElement("CellContents")
          writer.WriteStartElement("Textbox")
          writer.WriteAttributeString("Name", Nothing, fieldName)
          '  writer.WriteAttributeString("CanGrow", True)'  writer.WriteAttributeString("Keeptogether", True)
          writer.WriteStartElement("Paragraphs")
          writer.WriteStartElement("Paragraph")
          writer.WriteStartElement("TextRuns")
          writer.WriteStartElement("TextRun")
          'writer.WriteElementString("Value", fieldName)
          writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
          writer.WriteStartElement("Style")
          writer.WriteElementString("TextDecoration", "Underline")
          writer.WriteElementString("PaddingTop", "0in")
          writer.WriteElementString("PaddingLeft", "0in")
          writer.WriteElementString("LineHeight", ".5in")
          ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
          writer.WriteEndElement() ' Style
          writer.WriteEndElement() ' TextRun
          writer.WriteEndElement() ' TextRuns
          writer.WriteEndElement() ' Paragraph
          writer.WriteEndElement() ' Paragraphs
          writer.WriteEndElement() ' TexBox
          writer.WriteEndElement() ' CellContents
          writer.WriteEndElement() ' TablixCellNext
      writer.WriteEndElement() ' TablixCells
      writer.WriteEndElement() ' TablixRow
      writer.WriteEndElement() ' TablixRows'End of Details Rows
      writer.WriteEndElement() ' TablixBody
      writer.WriteStartElement("TablixRowHierarchy")
      writer.WriteStartElement("TablixMembers")
      writer.WriteStartElement("TablixMember")
      ' Group
      writer.WriteElementString("KeepWithGroup", "After")
      writer.WriteEndElement() ' TablixMember' Detail Group
      writer.WriteStartElement("TablixMember")
      writer.WriteStartElement("Group")
      writer.WriteAttributeString("Name", Nothing, "Details")
      writer.WriteEndElement() ' Group
      writer.WriteEndElement() ' TablixMember
      writer.WriteEndElement() ' TablixMembers
      writer.WriteEndElement() ' TablixRowHierarchy
      writer.WriteStartElement("TablixColumnHierarchy")
      writer.WriteStartElement("TablixMembers")
      'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
          writer.WriteStartElement("TablixMember")
          writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
      writer.WriteEndElement() ' TablixMembers
      writer.WriteEndElement() ' TablixColumnHierarchy
      writer.WriteElementString("DataSetName", "tbdataset")
      writer.WriteEndElement() ' Tablix
      writer.WriteEndElement() ' ReportItems
      writer.WriteEndElement() ' Body
      writer.WriteStartElement("Page")
      ' Page Header Element
      writer.WriteStartElement("PageHeader")
      writer.WriteElementString("Height", "1.40cm")
      writer.WriteStartElement("ReportItems")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, "Textbox1")
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      writer.WriteElementString("Value", Nothing, "ABC CHS.")
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TextBox
      writer.WriteEndElement() ' ReportItems
      writer.WriteEndElement() ' PageHeader
      writer.WriteEndElement() ' Page
      writer.WriteEndElement() ' ReportSection
      writer.WriteEndElement() ' ReportSections' DataSources
      writer.WriteStartElement("DataSources")
      writer.WriteStartElement("DataSource")
      writer.WriteAttributeString("Name", Nothing, "tbdata")
      writer.WriteStartElement("DataSourceReference")
      writer.WriteEndElement() ' DataSourceReference
      writer.WriteEndElement() ' DataSource
      writer.WriteEndElement() ' DataSources'DataSet
      writer.WriteStartElement("DataSets")
      writer.WriteStartElement("DataSet")
      writer.WriteAttributeString("Name", Nothing, "tbdataset")
      writer.WriteStartElement("Query")
      writer.WriteElementString("DataSourceName", Nothing, "tbdata")
      'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
      writer.WriteElementString("CommandText", Nothing, "TableDirect")
      writer.WriteEndElement() ' Query'Fields
      writer.WriteStartElement("Fields")
      ForEach fieldName In m_fields
          writer.WriteStartElement("Field")
          writer.WriteAttributeString("Name", Nothing, fieldName)
          writer.WriteElementString("DataField", fieldName)
          writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
          writer.WriteEndElement() ' FieldNext
      writer.WriteEndElement() ' Fields' rd datasetinfo
      writer.WriteEndElement() ' DataSet
      writer.WriteEndElement() ' DataSets
      writer.WriteEndElement() ' Report' Flush the writer and close the stream
      writer.Flush()
      stream.Close()
      'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
      Dim ms AsNewMemoryStream(myByteArray)
      'Supply Stream to ReportViewer
      ReportViewer1.LocalReport.LoadReportDefinition(ms)
      ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
    An error occurred during local report processing.
    The definition of the report '' is invalid.
    The definition of this report is not valid or supported by this version of Reporting Services.
    The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
    Details: Data at the root level is invalid. Line 1, position 1.
    Can anybody guide me?

    Hi Wendy Fu,
    Thanks for your feed back. I could see Microsoft.ReportViewer.ProcessingObjectModel.dll to add as reference to my project. Actually I can open generated rdlc in designer, at run time I get error. I could not make out where is the exact mistake out of three
    options flashed.
    The definition of this report is not valid or supported by this version of Reporting Services.
    The report definition may have been created with a later version of Reporting Services
    or contain content that is not well-formed or not valid based on Reporting Services schemas
    Details: Data at the root level is invalid
    My web config has following references
    <add assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
    <add assembly="Microsoft.ReportViewer.Common, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
    May be I have to change these versions to 9 or 10.
    First I will try adding Microsoft.ReportViewer.ProcessingObjectModel.dll .
    Once thanks for your reply.
    Races

  • TS3682 i have upgraded ipad with the latest version of ios. However, while restoring backup from itunes to ipad, a password is being asked. i do not have password, how to go about?

    i have upgraded ipad with the latest version of ios. However, while restoring backup from itunes to ipad, a password is being asked. i do not have password, how to go about?

    Restore from iCloud Backup
    1. Erase all contents and settings (Settings>General>Reset>Erase all content and settings)
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Enable Location Service
    9. Select network, enter password and join network
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Selected Restore from iCloud Backup

  • I update my iPad with the new version 7.0.3 and my game Hay Day also was updated, but with another Apple ID that is not mine, how can i change and put my Appel Id ??

    I update my iPad with the new version 7.0.3 and my game Hay Day also was updated, but with another Apple ID that is not mine, how can i change and put my Appel Id ??

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622

  • I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

    I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

    fyfesa1970 wrote:
    Ask a simple question and get a simple answer...see below...hilarious:
    All representatives are actively assisting other customers. Your estimated wait time is 0 minute(s) and 1 second(s) or longer. Thank you for your patience.
    We all can learn from this. Whenever you get stuck in a customer-service situation that goes nowhere, as soon as you become aware of the futility, get the name and employee ID of the person, then say, "I don't mean to be rude, I think we're both wasting our time. Perhaps you weren't trained for this issue, or perhaps your system isn't displaying the correct information. It doesn't matter, because I'm not getting proper customer support this way. Please ESCALATE this to your highest-level manager IMMEDIATELY. If that person isn't availabe, ESCALATE me to that person's highest-level manager. If you haven't been given the proper training, you can use this to inform your manager that you need the training. Thanks for trying to help. I appreciate it. I have copied and saved this chat session. NOW PLEASE ESCALATE THIS CASE AS I HAVE REQUESTED ABOVE. I'm waiting now... "
    The point is that you're a customer, and the company needs customers, so the individual who's failing to deliver good service needs to be identified so they can be properly trained, and so that problems in the system can also be identified, but more important is that you get the service you're entitled to.
    If you search the forum for similar questions, you'll see the kind of information that the volunteer users like yourself on the forum need to know about your system and files involved, so they can help you better.
    Good luck.
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

  • Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10?

    Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10? We have a remote desktop farm setup with 2012 R2 servers and we are publishing some web links that only work with IE10. As a result, we need to
    downgrade the remote desktop servers to IE10. I have a feeling that this isn't possible, but if I could get a definitive answer, I would greatly appreciate it, thank you!

    Hi,
    Agreed with DonPick.
    Internet Explorer 11 is preinstalled with Windows 8.1 and Windows Server 2012 R2.
    More information regarding Internet Explorer 11, please check:
    Internet Explorer 11 - FAQ for IT Pros
    http://msdn.microsoft.com/en-us/library/dn268945.aspx
    Best regards
    Michael Shao
    TechNet Community Support

  • Will an onboard garaphic card work with the lates version of photoshop or do I have to have a dedicated graphic card

    Will an onboard graphic card work with the lates version of photoshop or do I have to have a dedicated garphic card

    Most likely you should be fine.  Some of the early i7s might not support it (did the first i7 core have integrated GPU?), but any of the last couple are fine.  The nice thing is, that you can always add an aftermarket GPU if you need to, so give it a shot.
    I have a Haswell i7 (4770k) in my desktop PC, and it's more than enough.  I did a lot of research when I built my PC and my conclusion at the time was that a GPU doesn't offer a sizable performance boost unless you buy a really nice GPU ($400+).  The integrated GPU can run all the functions of CS6.
    My laptop is an older i5.  Not sure which, but I think Sandy Bridge.  I can notice the difference in process times between the integrated GPU and discrete (AMD).  But only on certain heavy filters and when working with big composites (~2 gb files).  But that's an i5 and and older one.  That said, the integrated GPU is far more stable, so I usually just put up the lag instead of having the AMD GPU crash my computer.

  • No sound while watching you tube videos on my ipad. This is my second replacement ipad with same problem.

    no sound while watching you tube videos on my ipad. This is my second replacement ipad with same problem. No sounds coming out from the speakers, even after reset everything. Mute button is assigned for mute function instead of screen rotation lock.

    Hi herbie13!
    It sounds like you will still want to link your iPad and computer, but you want to prevent the iPad from syncing information from your computer to your iPad. I have an article here for you that can help tell you how to set this up:
    iOS: Syncing with iTunes
    http://support.apple.com/kb/ht1386
    You will want to follow the steps here to set up the iPad for syncing, but when it comes time to sync, you'll just want to make sure that the boxes for syncing the multitude of items that you can sync remain unchecked so that none of that information gets synced into the iPad.
    Another note: your second Apple ID will not be able to access the apps, music, movies, tv shows, etc., that you have purchased under your primary Apple ID. Even though it seems that the secondary Apple ID still has access to those items, that is just because you are viewing your second Apple ID through the iTunes Store section on your computer and you have those items saved locally on your computer. You will need to repurchase and download all of the content that you wish to use again on your second Apple ID, if that is what you wish to solely use on this iPad.
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • I am planning to purchase Ipad with 3G which versions should i purchase, so that it can be used back in India

    I am planning to purchase IPad with 3G, which version should i purchase, so that it can be used back in India.

    Get the AT&T version. The verizon is CDMA, which doesn't work in other countries while the AT&T version uses SIM cards, so you can use it with other networks.

  • Is Final Cur Pro 7 support due to be terminated soon?  If so, what has replaced it?  I hear Final Cut Pro X is really awful have replaced it with a new version?

    Is Final Cut Pro 7 support due to be terminated soon?  I know that Final Cut pro X is awful but has it been replaced by something new?  If so will Final Cut Pro 7 be able to interact with any new version?

    When it first appeared in 2011, FCP X attracted a lot of adverse criticism because it appeared that Apple, in their enthusiasm, had rushed it out a bit too quickly whilst there were still some glitches that needed ironing out and a lot of features that had not been incorporated.
    Since then there have been 8 revisions and these later versions have answered pretty well all the criticisms that were levelled against it.
    As with every brilliant new invention there were teething problems coupled with dinosaurs who resented anything different or new ............. when electricity took over from candles there were numerous prophets of doom and history has countless similar examples.

  • Replace photos with higher resolution versions?

    A professional photographer sent me a DVD with about 1,000 photos on it from an event I hosted.  I imported them all into iPhoto and made a couple of photo books out of them (but didn't yet get them printed).  I noticed the resolution wasn't what I expected, so the photographer sent me a new DVD with higher resolution versions.  Same filenames.  Is there any way to import the new versions into iPhoto, replacing the old ones?  Ideally they would appear in the photo books, too!  I'd hate to have to spend hours recreating what I did.
    Thanks!

    I don't think so, iPhoto is designed to prevent "collisions" between similar file names, so you can't just import them. You would have to do major surgery to the iPhoto Library, which is not a good idea. And still might not work.
    I think you should just re-import and start over.

  • OSB installation - replacing log4j with more newer version

    Hi,
    Is it safe to replace in production a log4j_1.2.8.jar file that is a part of OSB installation with a newer version - log4j-1.2.16.jar?
    We try using JBoss JMS client in the domain where OSB is installed, however it requieres at least 1.2.12 version of log4j.
    Thanks,
    Yuriy

    I wouldn't replace any library bundled with WebLogic. I would rather put new jar into the application and set prefer-web-inf-classes to true.
    http://download.oracle.com/docs/cd/E13222_01/wls/docs90/programming/classloading.html#1082452

  • I recently updated my IOS software on my IPAD with the latest version and now video from some sites does not run. I did not do the update on my other IPAD and the video runs fine. Any idea why.

    I have an IPAD 3 and recently updated the IOS software with the latest version and now video from some sites will not display where it did prior to the update. When I go to those same sites on my other IPAD that I did not do the softward update the video still works. Any idea why and what to do to fix it?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
     Cheers, Tom

  • HT4260 I am working with a later version of Airport Extreme's using Mountain Lion. Are these instructions suitable?

    I am trying to setup an extended wireless network using 2 Airport Extremes (4th and 5th generation). I have ethernet around the house. I have my wireless network setup but cannot add the second AE. My broadbanc connection is via cable modem.
    Any help would really be appreciated!
    Thanks
    Barbara

    Hello Barbara,
    Things are very different now with the new version of AirPort Utility in Mountain Lion. Apple says that no instructions are really needed, since the setup is now much simpler than in the past.
    Still, most users need a few hints to get going, and it's always good to check your connections first, to verify that the Ethernet "backbone" is working correctly before trying to add a second AirPort.
    I understand that you already have one AirPort Exteme set up and working, which we will call AE 1.
    Connect an Ethernet cable from one of the LAN <-> ports on AE1 to your Ethernet connection for the house....probably a wall jack.
    Temporarily, move your MacBook Pro to the location where you want to install AE2. Turn off the wireless on the MacBook Pro  (by clicking the fan shaped AirPort icon at the top of the screen). Connect an Ethernet cable from the Ethernet wall port to the MacBook Pro, and check to see if you can get a good Internet connection with the MacBook Pro connected this way as a test.
    If you can, then you know that the Ethernet wiring is functioning correctly. You can disconnect the Ethernet cable from the MacBook Pro now, and turn the wireless back on.
    If you cannot get an Internet connection with the "test", then you'll need to do some additional troubleshooting before you can connect AE 2.
    Post back on your results, and we will continue with the setup of AE 2.
    I assume that AE 2 is new, and that you have not made any changes to this device, or tried to configure it yet.

Maybe you are looking for