Replacing PO Out for Communication

Hi,
We have a custom BIP Report for printing POs. Now we want to replace the PO Out for Communication program with our new custom program so that PO Approval workflow will pick the output generated by the custom template. Please let me know if someone has already done this.
Thanks in advance.
Regards,
Raj

ICX was already checked.... The Issue got resolved when I select the check box "Can Change Forward-To" in the Setup --> purchasing --> Document type window for Standard Purchase Order.
Thanks,
Ranjith

Similar Messages

RTF for PO Out for communication

Hi All,
My question is for all people who have succeeded in creating a rtf template from scratch for a Purchase order using the standard XML obtained from XML Publisher Responsibility.
I want to the know the procedure to do. I am trying to create it from scratch but getting a strange error while generating to XSL.(Something related Encoding/Decoding).
I am sure many might have succeeded in doing this.
Please guide me through.
Thanks

How can I get the template( word rtf ) for PO – Printed Purchase Order ? XML Publisher Administrator -> Templates
find by code or name
open it and you can downloadtemplate by "download" button

If my iphone 3g screen has smashed and my phone is out of warranty. will apple be able to replace the phone for me or repair the screen?

if my iphone 3g screen has smashed and my phone is out of warranty. will apple be able to replace the phone for me or repair the screen?
i heard apple can upgrade my phone if a pay a specific amount? is this correct?
also if my phone is out of warranty how much would it cost for it to be replaced?

Apple does not repair smashed phones. It will replace the phone with another iPhone 3G as an out of warranty exchange for 199.00 USD.
You should check with your carrier to see if you are eligible for a subsidized iPhone 4. It may cost you the same as the out of warranty replacement for a phone almost 3 generations old.

SOLUTION to "Software required for communicating with the iPod is not insta

Folks, I can not take credit for this.....you should send your checks to MarkinMadison. I've included his post in it's entirety. For me, this was the Holy Grail !!
My only comment is make sure when you are in the registry that you hit the "apply" button to change and add things.
This probably won't solve everyone's problem but it clearly solved mine (and I tried all other "solutions"), as well as Mark's.
Apple: please find out who MarkinMadison is and either cut him a big check or offer him free Ipods for life.
"Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Click the checkbox that says: "Replace owner on subcontainers and objects."
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
3.7 If you can't delete, you might need to open up the keys and repeat the procedure on the sub-keys.
4. Exit out of the registry editor.
5. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark"
Dimension 4600 Windows XP

I have also posted the same question, earlier today. I purchased two for my children and cannot get the iPod to communicate with the computer. I have the iTunes software on my system, but during the installation process I cannot click the NEXT button, once I plug the iPod cable in. The computer does not detect it. I have tried all 6 USB 2.0 ports. I even removed the Dell Jukebox and MusicMatch programs. I am not a computer savvy person - just a mom who wants to give these to my children for Christmas. This is the first "chat" site I have even registered on. I am so very frustrated. Hopefully, this can be resolved.

Standard def STB repeatedly blacks out for a second or 2

A site search on "black out" does not turn up a similar issue, of course it may be my search skills are lacking.
New subsciber since Sep 2010. I have 3 boxes, 2 standard QIP2500 phase 3 (basement/MBR) and 1 hi-def (LR). Hi def TV in MBR, standard in other 2. Both standards would on occassion 'black out' for just a second or 2 ever since original install. No problem with the hi-def. One standard is wired with coax, one with s-video, the hi-def with HDMI. When the black out occurs, the screen will freeze for an instant, then the screen goes black, then it comes back. The information on the box does not black out, the TVs don't power-off and restart. It's just the screen goes blank and then comes back. It happens without any seeming warning, and will happen at any time of day. Sometimes it will happen repeatedly, sometimes it won't happen for a long time. Both boxes have been repeatedly reset and rebooted with no improvement. During one tech call the tech had me relocate one of the standard boxes to the hi-def location to isolate that it wasn't a location (in-house cable) problem. I thought it curious since it was happening at 2 different locations but went through the drill anyway. The relocated standard worked for a few minutes, then went black for a second as the problem does. Plugging the high-def back in resolved the issue at that location. The tech said he would send 2 new standard boxes. The replacement boxes have not resolved the issue. Any suggestions?

if it's doing that on two different boxes using both coax and s-video then I think that leaves a possibility of the coax. that would be a unusual symptom of a bad coax/splitter but try this.
Wait for it to start acting up - when it starts acting up, stay tuned to that station, and hit your menu > customer support > in home agent > network diagnostics and click ok to start.
check the video signal using that menu selection. after it's done running it will give you a general message like "you're video signals are not in the optimal range" after you see that, hit info and then look at the SNR DB it should give you a number.
32-36 is optimal, below that is questionable.
If it is below that then it's probably going to be a problem with the splitter at your house, and you would either replace it yourself, or call verizon to replace it. be sure to tell them the DB

"The software required for communicating with the iPod is not installed..."

I realize my explanation of my problem is long-winded, so if you want a shortened version, here it is:
I've followed all the instructions trying nearly everything, and no matter what I do, iTunes gives me the error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." My G5 iPod (60GB) works on two other computers (both without any music on them), so I assume there something wrong with my computer and not the iPod itself.
Now for the long-winded story of the last eight hours of my life...
I just got the Generation-5 iPod Video (60GB) a today and I'm having problems already. I followed the instructions and installed the iPod software and then plugged in my iPod (iTunes has been on my computer for a while now). I was expecting iTunes to open after plugging in the iPod, but my device manager only detected and installed "a new device". I manually opened iTunes and got an error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
After re-installing the iPod software and iTunes, and restarting my computer countless times, I came looking for help here. I found this page, which seemed to outline my problem exactly. My computer recognizes the iPod as a drive, but iTunes won't have anything to do with it. I have all the symptoms outlined in the heading, so I hoped to solve my problem there. I followed the instructions step-by-step, and after the final restart, I open iTunes to get the same exact error message.
I decided to determine whether there was a problem with my iPod or if it was my computer. I plugged my iPod into my uncles's powerbook, and got to the point where I can name and configure my iPod. I expected it to work flawlessly on a Mac (which it did) but there is no way for me to continue using a Mac (after tomorrow) for my iPod. This formatted the iPod for a Mac, so I went to another (different from the original) Windows computer, clean of any iTunes and iPod software, and followed the instructions exactly as they're supposed to be followed. After the installations, I plugged in my iPod, and although iTunes didn't open, I was able to format back to Windows and name my iPod (a step in the right direction). I should note that my (anti-iPod) computer is a Windows XP Pro, and the working one is Windows XP Home Edition. This was all well and good, until I remembered there was no music on this computer. So my iPod is completely working there, but there isn't anything I can do with it.
Next, I came back here and browsed around the discussion boards, hoping to find somebody with a similar problem to mine. There seems to be alot of errors concerning iTunes not recognizing the iPod, but none of the solutions I tried worked for me, including changing the drive letter. I get the "iPod Service Error" while trying to restore to factory settings through iPod updater.
Of course, I could transfer all 32GB of music from one computer to another, but the second (working) computer isn't mine and I won't have access to it in a couple months. It would be most convenient if I could get my iPod working on my own computer. Any help would be appreciated, especially from somebody who has solved this problem or know how to solve this problem.
P.S.
Here are some other minor details that my be important, but I didn't feel they were worth including.
- My brother has his iPod mini set up on my computer, under a different user login. He gets the same error once in a while, but re-installing iTunes always solves the problem for him. I had him try solving my problem his way, but nothing worked for him either.
- My computer is an AMD Athlon 64 Processor 3200+, 512MB RAM with Windows XP Pro SP2 installed. My internal hard drive is partitioned, using the letters C, D and H (C being my system files, D used for recovery files and H for my applications and games). My E drive is used as a DVD/CD-ROM Drive, and drives F and G are reserved for virtual drives (none have been running during this entire ordeal). My external hard drive uses the letter I, and I manually set my iPod to use the letter J (I've never used 'J' for anything else before).
- Yes, I have downloaded and installed the latest versions of iTunes and the iPod software.
- I'm assuming there is a problem with my computer and not my iPod, since it worked on both other computers I tried. I'm hoping it's as simple as changing a registry file or cleaning out (yet another) temp directory.

Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
I think that's all that's required, but I also searched through the registry and deleted the following keys.
4. Other keys I deleted:
4.1 HKEYCLASSESROOT --> IPodManager.IPodManagerUI.1
4.2 HKEYLOCALMACHINE --> SOFTWARE --> Apple Computer Inc. --> iPod
I think that's all I deleted, but I'm not positive. I seached for instances of "ipod" using the Find... and Find Next functions under the Edit menu.
5. Exit out of the registry editor.
6. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark

My power just went out for a few seconds- is there any way to restore the document I was working on?

My power just went out for a few seconds. Is there any way to restore my document? I had already had 2 hrs worth of work for an interview tomorrow and do not have time to start from scratch?

UPS
http://www.amazon.com/CyberPower-CP1500PFCLCD-Compatible-1500VA-Tower/dp/B00429N 19W/
Mac OS X Forum
https://discussions.apple.com/community/mac_os?view=discussions
Recovery Mode
http://support.apple.com/kb/HT4718
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
General purpose Mac troubleshooting guide:
Mac OS X: Starting up in Safe Mode - http://docs.info.apple.com/article.html?artnum=107393
What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form
You should have TimeMachine saving your work, YOU need to be doing Save As somewhere else as you work, you don't say what application and whether you have Lion 10.7 or later (10.8.4)
Can't say enough for the importance of using a UPS. Get one and plug your modem, router, computer into one and don't worry about data loss and lost modem or corruption or the effects to electronic devices.
This forum deals with a desktop/tower 65lb Mac Pro
http://www.apple.com/support/macpro

Screen blacks out for a few seconds occassionally

Sometimes my screen blacks out for a few seconds, then comes back on again. I have an original Titanium powerbook. Is this a warning signal of worse to come? I know I should replace the computer soon, but it's working just fine for now. I just don't want it to die before I've moved on to a new machine.

Hi Julie,
Obviously no one can predict with certainty what the future will bring, but if I were in your shoes, I would certainly think there was worse to come.
Many things could be causing this, but it sounds like a short circuit or bad connection, possibly with the display cables running through the hinges, or where they connect to the logic board. It could also be a sign of the display dying, though they usually just get dimmer and dimmer or simply die.
Does the "blinking" correspond to any movement of the PB?

Apex 4.0 install note - watch out for PLSQL_OPTIMIZE_LEVEL 3 in 11g!

Hi all,
I just wanted to share a tidbit I found during installation Apex 4.0 on an 11.2.0.1.1 database on a slower computer...
We had our PLSQL_OPTIMIZE_LEVEL set to 3 to enable code-inlining for PL/SQL objects - and this REALLY slowed down the apex installation big time. It was so slow I aborted the install, then restarted after setting it down to level 2.
After setting it to level 2 - it really sped up and installed fine.
I just wanted to share this in case others run into a hanging install like I did...
I'm thinking that apexins.sql should be modified to "ALTER SESSION SET plsql_optimize_level = 2;" before proceeding - but before then - be sure to keep an eye out for this...
Good luck!
Edited by: Philbewan on Jun 24, 2010 6:14 PM

Hi Phil,
Thanks for posting this information.
I've installed APEX 4.0 with optimization level 3 and code=type = native in an 11.2.0.1 database, and you're correct - it took a while. And I imagine on a "slower computer", this will take even longer. But I reason this is to be expected - you're asking the PL/SQL optimizing compiler to be most aggressive in its optimization against the PL/SQL objects of Application Express...and as you know, there is a lot of PL/SQL in Application Express.
Also, the installation and compilation step is a one-time event. If you're looking for maximum performance for each and every page view (execution of the APEX engine for millions of page views), the extra cost of time associated with installation seems almost trivial, by comparison.
I don't agree that apexins.sql should be modified to alter the PL/SQL optimization level. Customers have it set for a particular reason and the Application Express installer shouldn't override that.
Regardless, I do believe your advice to be aware of this setting is worthwhile for the APEX community. Thanks for sharing this.
Joel

Replacement optical drive for late 2009 Mini

I recently purchased a used late 2009 Mac Mini that works great except the optical drive does not read any CD's/ DVD's I have fed into it. I hooked up an external USB drive which reads hem fine, but is not bootable, in case I ever need to reinstall my OS.
Can anyone provide a model # of a reasonability priced internal slot load CD/ DVD reader- writer that is also Mac bootable?

There should be a compatible replacement superdrive-like optical drive
among those listed for Apple Mac Mini from OWC macsales site online.
They also appear to have several other upgrade & replacement parts...
An instruction video (free) can be seen on the bottom of their pages
on how to install optical and hard drives. Or use online iFixit guides.
About USB flash or externalHDD, be sure the HDD or SSD is formatted
to use with GUID and HFS+ Journaled; there may be other details that
need to be readfor these to work. External USB optical drives can be
used with bootable system discs, be sure to check retail seller returns
policy when you get some brand such as LG or other, so you may return
the unit should it not work out for your purposes. Some won't boot OS X.
Good luck & happy computing!

Where can I buy a replacement DVD drive for a mac mini A1347

My mac mini is out of warranty and my toddler stuffed several discs into the drive slot.
Whenever it booted, it made a horrible ratcheting clicking noise, but couldn't eject anything.
I disassembled the entire computer, and pulled all 3 discs out with pliers. After reassembling, the computer works fine, but the DVD drive won't "catch" a disc and pull it in. I'm pretty sure some gear or something has been irreparably damaged, or that I bent it as I was pulling the disc out.
I've been having a difficult time trying to find a replacement drive to order anywhere.
Besides going with an external USB drive, does anyone know of the cheapest option for a replacement slot drive for the mac mini A1347. (AKA "mid 2010", AKA Core 2 Duo DDR3).
I don't want to haul it down to an Apple Store and pay a huge premium to have them diagnose and replace a part that I'm very capable of doing myself.
-John

If your in the US then the ifixit link is a good option, in the UK the following is an option
http://www.applemacparts.co.uk/store/mac-mini-intel-mid-2010-a1347-core-duo-c-76 85_8044_9197_9198.html?filter_id=1371&sort=1a
However when I had to replace a drive in a Mac mini, I bought a bare drive off eBay.

The software for communicating with ipod is not installed correctly..

Everything used to work fine on my laptop. I'm fairly sure it was after I had uninstalled Zune crap from my laptop when my iTunes started messing up and saying "the software for communicating with ipod is not installed correctly".
I've searched the whole internet front to back about this error and most things I find are from 2005'ish. I've tried changing the registry permissions, reinstalling itunes, clearing out everything that has to do with itunes, doing all the msconfig things, manually starting the ipodservice.exe.
I still cannot figure it out and I've had this error for like 3 months. Only thing that I notice that MIGHT be odd is that I'll have ipodservice.exe running (from System) and when I open iTunes another ipodservice.exe will open (from my username) and then close after a few seconds and then I plug my ipod up and bam, the error from above comes up. Anyone have any clue? Like I said everything worked fine at one point!
Thanks!

Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!

Adding logo to the standard PO Output for communication program

Hello All.
I need to add company logo to the Standard PO Output for Communication program. Can someone please tell me a way to do this. I went into applications and see its a Java Concurrent program. I even went into these forums and I saw there is a way to uncomment out the line in the XSL file and add the logo there , but how do I upload back to the template. The Upload Button is disabled for this template.
Can we use the Standard Purchase Order Stylesheet for this?
If so how to make changes and how can I upload it back?
Should I do an RTF temnplate?
Can someone pl help me here. We are on R12 and I am not much familiar with exposting RTF to XSF FO.
Thanks
Vidhya

We took the standard PO document XSL-FO template and enhanced for our own needs. The first of those is to utilize the company's logo. Search for 'external-graphic' in the xsl-fo template. The first hit will be the section for the logo. The comments in the template provide some guidance on what to change. For our company, I changed the URL to point to a .gif file on the Apps server ($OA_MEDIA/company_logo.gif) .
The one downside that I have found so far, is that I am have to hard-code the entire document path. This path will change between instances. So I once our production instance is defined, I will set it to that path.
- Scott

URL for communication channel monitoring

Can anyone help me out with the url for communication channel monitoring as we have for adapter engine monitoring
http://<host>:5<sys#>00/mdt/amtServlet
Mudit

Hi,
http://hostname:server/rwb/index.jsp
to monitor the CC go to RWB and click display...there u will find CC...........click on it then u can check the cc log.
Regards,
Pphani

VS Exp 2013: Unable to create the Web site ... The components for communicating with FTP servers are not installed.

I have MS Visual Studio Express 2013 It has worked fine for many months and then suddenly (I have made no configuration changes or added new programs) when I try to publish I am getting the message:
Unable to create the Web site 'ftp://ftp.xx.xx/xxx.org.uk/www/htdocs'. The components for communicating with FTP servers are not installed.
(I have replaced actual name with x's).
I had a similar problem some months ago and found that saving all files, closing VS 2013 and re-starting the program fixed the problem. This time it has not.
I am at a loss to know how to take this forwards. I do not use IIS.
Any help would be appreciated.
Michael.

Hi Michael,
For web site development, so you use the VS2013 express for web, am I right? We have to make sure that it is not the VS version issue.
As you said that it worked well before, did you install other add-ins or tools in your VS IDE like
Xamarin or others?
Maybe you could disable or remove all add-ins in your VS IDE, test it again.
please also install the VS2013 update 4 in your side.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Replacing PO Out for Communication

Similar Messages

Maybe you are looking for