Replenishment TR will not generate TO due to max Qty Exceeded

We allow negative stocks in our fixed bins. A TR was created for a replenishment for the bin maximum plus the amount of the negative stock. As a result, the TO will not create due to error message "Maximum quantity for storage bin will be execeeded by NN each.
Stock situation:
Fixed bin avail stock -14
Fixed bin total stock 0
Fixed bin open TO 14 - (which will not be able to be fulfilled w/out a replenishment)
Max allowed in bin 90
Min 40
TR is created and remains open for 109 (this TR was created the previous day when we had negative stock of -19).
I don't know why the TO would not create partially the quantity from the TR as we allow this during the TO create job.
Again, thank you,
Sandy

Hi Sandy,
I think you were removing 14 pcs from your fixed bin, and confirmation still hadn't taken place.
I did the same in my system and executing report RLAUTA10 I got error message L3369. When I was trying to do it manually, processing the TR from LB10 I received the same error message you got.
1. The problem is that until the stock removal isn't confirmed SAP doesn't consider the stock removal, total stock level is same as before the creation of the TO
2. The indicator in RLAUTA10 report you are speaking about is not to allow partial processing of TR, it is to allow the processing of partial TR.
...whether transfer orders can be created for partially processed transfer requirements.
(F1 help for the field)
3. Under certain circumtainces it is possible to get partial TO in such situation: if in the first bin, from which SAP wants to remove the stock and put into fix bin, is less stock than the difference between maximum stock level and total stock - of course this is just a remark and is worth of nothing concerning business process.
Despite these things I think your claim is justful and natural since this behaviour of SAP can cause problems (in business processes). If you cannot find out anything / won't receive any better reply, maybe you should contact SAP to discuss this thing.
Please read what SAP help says:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/fd/90fbf4b3cd11d3b2ad0050045571f7/frameset.htm
(I think of two-step confirmation here)
Please also check this thread about immediate TO creation during replenishment:
http://www.sapfans.com/forums/viewtopic.php?f=6&t=319344
Regards.
Csaba
Edited by: Csaba Szommer on Oct 11, 2008 8:05 PM

Similar Messages

After the last update that was pushed out by Adobe, my Acrobat 9 Pro will not generate a PDF file fr

After the last update that was pushed out by Adobe, my Acrobat 9 Pro will not generate a PDF file from; [right click], Combine files into one PDF multiple files chosen in the explorer. A message pops up asking if I want to run repair. Answering in the afirmative results in another message stating files are missing. And we are back at square one.

What is the exact error? Else you could always reinstall your software.

Why for P.O. Accounting document will not generate.

Hi,
In T.Code ME21N why Accounting Document will not generate,
please give brief information,
Thanks
Samsunder

Hi,
In case of creating a P.O (purchase orde) no Accounting Document will be generated.Accounting entry will be generated At the PGI (post goods delivery , movement Type 601)
The accounting entry will be
cost of goods sold Dr.
to Inventry Account Cr.
With regards,
Sudipto

Tab bar will not generate new tab if press+ - Links work- Right Button click 'open in new tab'

Now working with 3.6.18 (I had v4, then v5 briefly), the tab bar 'failed' in v5 so I went back to v3.6.18, but the problem followed.
No matter how many tabs are open I cannot get a new blank tab by clicking the "+" tab on tab bar.
I CANNOT get a new tab by mousing over another tab, right button menu "new tab" will not work.
I CAN select a bookmark "open in new tab" it works.
I CAN do the same on a link, "open in new tab" it opens in a new tab.

Didn't even know I had one, so I told it to display then went to the right hand end where a drop down menu offered "uninstall" and fired that , and again, and again, and again, the sticky little booger grinned back, but would not leave.
Reminded me of early Windows days when Win would die and tell you, "I just lost all your work" "OK?"
Going to look for a big hammer, it used to make me feel good to have the last FINAL word.

Im trying to install itunes but quicktime will not allow it due to an update, i have downloaded the update but it wont install. ive tried everything i know to do. any suggestions.

i have been trying to download and intsall the latest version of i tunes, however i tunes will not install because quicktime is not up to date. I have downloaded the version of the proper quicktime update but it will not install. i need suggestions on how to fix this. this is my first mac its an old ibook g4, and i have limited computer knowledge.

Hi, and welcome to Apple Support Communities.
Which exact iBook model is it?
You can choose from this list:
http://www.everymac.com/systems/apple/ibook/index-ibook.html
Which version of the operating system is it running now? (It is impossible for an iBook G4 to run Mac OS X 10.0.)
How much RAM is installed?
What kind of optical drive does it have? (CD-ROM, CD-RW, DVD, Combo, or SuperDrive?)

ITunes will not install completely due to Windows Logo Test!

+"The software you are installing for this hardware:+
iTunes
+has not passed Windows Logo testing to verify its compatibility with Windows XP (Tell me why this testing is important.)+
+This hardware will not be installed. Contact your system administrator."+
It has been doing this for a few weeks now, and it's only when it tries to install the drivers to my CD/DVD drive. There isn't even a bypass for it provided. I have switched it to ignore the logo test and still it brings the message up every time.
Also, because of it, I get the annoying message every time I start iTunes:
+"Warning! iTunes was not properly installed. If you wish to import or burn CDs, you need to reinstall iTunes."+
I've gone through all the motions of uninstalling it and reinstalling it several times. It hasn't helped at all. Please help! I just want this behind me!
I forgot to mention before that I have been looking EVERYWHERE for a possible answer to this question with no luck, so any help at all would be greatly appreciated.
Message was edited by: Collin Alexander Curtis

I've been having the similar problems too. For some reason, I can uninstall iTunes, but when I try to uninstall Apple Application Support and Apple Mobile Device Support, I get the "Could not open key: UNKNOWN/COMPONENTS/etc./ Verify that you have sufficient access to that key, or contact your support personnel. iTunes was not installed correctly. Please reinstall. Error 7. Windows error 127." error message. I'm on an admin account on Windows 7 and I've tried setting universal permissions through Regedit for the specific keys in question, but nothing works. I'm also missing the dll files required to run iTunes and its associated programs.
Please help, this is getting really frustrating!

My mac email will not receive messages due to icloud

I have a Mac OS X verison 10.5.8. Weeks ago I thought I had moved from mobileme to icloud. This morning my apple email stopped receiving but it could send out messages. I called Apple and was told that I have to upgrade to Snow Leopard and then to Lion so because my current version is not compatible with Icloud. Until the upgrades are done, I can only check my incoming emails on the iCloud website. Something doesn't seem right here.

Yes you will be unable to use your email address after June 30, 2012, if you do not update your MobileMe account to an iCloud account.
You can upgrade your account and continue to use the email address in your mail application by entering the details manually. You will not however be able to use any other features of iCloud.

ITouch says connect to iTunes, itunes will not accept it due to password.

My iPod touch has a screen with a USB cable pointing twards the iTunes logo, and I assume that means to connect it to iTunes. When I hook my iPod up to my computer, however, iTunes gives me a message saying "iTunes cannot access this device because it has a passcode lock on it." The problem is, however, that I cannot type the password in on my iPod, because it will not move from the "Connect to iTunes" screen.

Bump. Help needed PLEASE.

Safari will not close out due to a pop-up, how do I fix it?

How can I close out safari when it will not let me?

Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide, remove adware that displays pop-up ads and graphics on your Mac, and AdwareMedic. If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.) You might consider adding this Safari extensions: Adblock Plus 1.8.9.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.

When I click on network utility and try to verify my disc it will not allow it due to a damaged disc. My Genius 3 repair disc doesn't work with the Lion OSX. What should I so now?

I have an iMac 10.07. Have a damaged disc according to disc utility. What should I do to fix this?
Thanks,
John

If you are using Lion you will need to restart your Mac in recovery mode. Then run disk utility to repair your hard drive.
OS X Lion includes a built in set of utilities in the Recovery HD. Restart your Mac and hold down the Command key and the R key (Command-R), and keep holding them until the Apple icon appears, indicating that your Mac is starting up. After the Recovery HD is finished starting up, you should see a desktop with a Mac OS X menu bar and a "Mac OS X Utilities" application window. Note: If you see a login window or your own desktop and icons, it is possible that you didn't hold Command-R early enough. Restart and try again.

Bridge in CS3 will not generate all thumbnails

I have a folder of about 1000 images. Most of the images show a thumbnail in bridge; however a few show only a blank with the name of the file under the blank "image". They are all jpeg's and about the same size. If I right-click on the blank "image" I get a drop down box that has "generate high quality thumbnail" as an option. When I left-click on that nothing happens. If I click on edit for one of the images that does have a thumbnail, both "generate high quality thumbnail" and "generate quick thumbnail" are grayed out. When I try to run a slideshow, the show runs, but when it gets to one of the "blank" images all I see is an icon in place of the image. Suggestions?

Are you using quick thumbnails? Most do as it takes less resources than HQ.
When in the folder with the problem click on Tools/cache/purge cache for folder xxx. The thumbnails will be then rebuild and see if that solves the problem. Let all the thumbs rebuild completely (spinning arrow on bottom left corner will stop) before carrying out any other operation. You may have a few corrupted files in the cache.

HTML Code will not generate Thumbnail image.

For Months I have been using this html code to generate a thumbnail image on on of the pages on my site. It essentially creates a player for the podcasts that I create on www.buzzsprout.com. Buzz sprout our the ones that provide the html code to put on your site.
Here is the code: <script src="http://www.buzzsprout.com/XXXXX.js?player=large&limit=1" type="text/javascript" charset="utf-8"></script>.
The XXXXX in the code represent the numbers for the individuals podcast page where the podcasts are displayed once they have been uploaded to their site. Soon after the latest update I have been unable to generate a thumbnail image on my site using this code. Why is that?

I am not sure what you mean be sharing a sample project. The website in question is www.ccont.com. Can't you create a page and paste the html code on it and see if it generates a thumbnail image. Use this html code that include my account number: <script src="http://www.buzzsprout.com/22782.js?player=large&limit=1" type="text/javascript" charset="utf-8"></script>

Project will not generate

I am new to Robohelp. Great software. I have been
working on a project with no problems. Generating and viewing the
results. Something has happened! I no longer can generate. I click
generate and nothing happens. No error message or anything! What
stupid mistake have I made?HELP! I have a deadline.

Here's the code that results when I try to generate a WebHelp
file:
Starting compilation...
WebHelp preprocessor 13.10.801
Compiling C:\Documents and Settings\cynthia.curl\My
Documents\RITMhelp\!SSL!\WebHelp\RITM.htm ...
Preparing to create WebHelp...
Clearing output folder...
Preparing files for WebHelp...
Copying files...
Updating files...
Finished preparing in 5 sec(s)
Initializing compiler...
Generating WebHelp 5.50 (13.10.801)...
Template Active Script Error: (null) [Line: 13] (null)
Template Error: can not resolve macro: RegisterResolvers
Fatal Error: Cannot run macro: RegisterResolvers in
compilation script.
Template Error: can not resolve macro: WH_HOME_HTM
Template Error: can not resolve macro: SF_HOMEPAGE_HTM
Template Error: can not resolve macro: WH_CSH_HTM
Template Error: can not resolve macro: WH_CSH2_HTM
Finished compiling WebHelp in 5 sec(s)
Compilation complete.
What do I need to do to get this fixed?

HT201485 My iphone won't let me download apps and refers me to my computer for verification. My computer will not access itunes due network issue. How to make iphone stand alone for downloads & updates.

In iTunes my iPhone refers me to iTunes on my computer for verification. iTunes won't work on my computer. How can both my iPhone and iPad stand alone?

Turns out that when my iPod Touch was restored, the restrictions had been turned ON for Facebook and several other apps. This is what was preventing the Facebook app from accessing my Camera Roll for picture downloads. This is odd since all of my iPod backups would not have had those settings turned on. This is also the first time this has occurred given the few times I've had to restore my iPod Touch.
Anyway if you experience the same behavior from your iPod or iPhone with iOS 8.0.2, just go to the General settings and review your settings under Restrictions. Once you set them to allow for changes, you should be back in business.

Report will not generate PDF only the XML output. View XML icon disabled

I created a PDF format report.
When the report completes, View Output shows XML code not the PDF output.
View XML button is disabled from Diagnostic on view request screen.
Any thoughts. All settings are the same as when other XML to PDF reports are created. Not sure why this one is not working.
Thanks

I'm afraid this is not an installation issue, it rather sounds and application server one, at the operative level.
I suggest you to post your thread at the Fusion Middleware or Developer Tools forums.
You didn't provide any OS nor Oracle / AS version, I suggest you to specify this information when posting in future threads.
~ Madrid.

Replenishment TR will not generate TO due to max Qty Exceeded

Similar Messages

Maybe you are looking for