Replication based on condition for whole Schema

Hi There
Oracle 11.1.0.7
We are using oracle spatial and we have got huge tables of size more than 50 GB . I just started configuring GG on test and i would like to know if it suits our requirement.
In this regards i have certain queries :
1) Can i configure GG for whole schema based on conditions , for example in the schema there are 300 tables , out of those i want all 250 to replicate at the target as is and the rest 50 should replicate on where approved = 'YES' . Is this possible ?
2) If its possible to filter data during replication , i would like to know if we can filter using a query which has a 'JOIN'
3) Should the target database (Oracle 11.1.0.7) have the tables with the data as on before starting GG so that when we start replicating both source and target should be exactly the same.
I appreciate if some one can post a response.
Thanks

You can filter data using a WHERE clause, or even using SQLEXEC, mapping OUT values to target columns. A join could be handled in the output from a stored procedure.
You can do all tables or a portion thereof. If names are similar, they can be wildcarded. Otherwise, list them.
Not sure what you mean by APPROVED.
For initial load, the stock answer is this:
GoldgenGate recommends using native RDBMS tools for the initial load. Restore a backup, that kind of drill. You can use one of the four GG initial load options, but given the size you mentioned, it would probably be much faster to create the target via Oracle Data Pump or RMAN.

Similar Messages

Error when Exporting DDL script for whole schema

When I right click connection, Select "Export" then "DDL Script", the following error occur (Exception Stack Trace)
java.lang.ClassNotFoundException: oracle.dbtools.raptor.dialogs.actions.UserDDLExport
     at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at oracle.ideimpl.IdeClassLoader.loadClass(IdeClassLoader.java:140)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:164)
     at oracle.dbtools.raptor.dialogs.BasicObjectModifier.launch(BasicObjectModifier.java:142)
     at oracle.dbtools.raptor.dialogs.BasicObjectModifier.handleEvent(BasicObjectModifier.java:210)
     at oracle.dbtools.raptor.dialogs.actions.XMLBasedObjectAction$DefaultController.handleEvent(XMLBasedObjectAction.java:265)
     at oracle.ide.controller.IdeAction.performAction(IdeAction.java:530)
     at oracle.ide.controller.IdeAction$1.run(IdeAction.java:785)
     at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:804)
     at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:499)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
     at java.awt.Component.processMouseEvent(Component.java:5488)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
     at java.awt.Component.processEvent(Component.java:5253)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3955)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1774)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

This is actually in our release notes as not implemented yet.
The following capabilities are currently planned to be added by the production release:
Tools > Export - Will be a DDL generator.
I will mention in the release notes when this function is operational. The menu item is just there now as a placeholder.
-- Sharon

Volume discount for whole month

Hello sir's
I am having one querry,
i maintain the time dependent condition Volume discount (zvls),
For EX:
I want to calculate the zvls for aspecific period,
suppose i created 10 nos of purchase order, post a GR and also settled the payment for that vendor in 1 month period,
now my purchased quantity is reaced 500 Kg and i set a discount quantity based
Qty       Disc
100       20 Rs
200       22 Rs
500       25 Rs
Now i want to take the discount from vendor,
what i suggest that its only possible only in credit memo against that vendor with all other values taken manually.
But they want to pick the condition for whole month automatically and calculate the discount for quantity for that period.
plz suggest.

Hi,
I had also once faced with the same problem but i am unable to provide a solution to my client. Instead if you configure the rebate agreement settings and process a rebate agreement for the same to avail the discount.
Also you can have multiple line items of the same material in the PO with the varying price. But this is quite manual and tedious too.
Regards,
RitiG

Freight cost condition for the whole purchase order (Header relation)

Maybe you could help me out with the following difficulty regarding freight costs for the whole purchase orders from the mass maintenance transaction MEK1 for pricing conditions.
I try to have one freight condition for the whole purchase order.
For instance, I maintained in the transaction MEK1 for the condition FRA1 the key combination vendor and purchasing organization (table 44) and entered an absolute value of X EUR.
Unfortunately this condition will not pulled as header costs in the purchase order, because I would have had defined an access sequence in the condition type, but this is not allowed for header conditions in general.
Do you have any workaround to maintain an item condition, which works like a header condition, so that I am allowed to have an access sequence and be able to maintain MEK1?
Any comments and help are very welcome.
Many thanks in advance
Sabrina

Hi,
Fright and discount conditions are called supplement conditon type and they are always matained with main condition type.
Please check PB00 condition type in m/06 transaction. You will find pricing procedure assinged as RM0002 to PB00 condtion type.
So you can maintain fra1 and other supplement condtions in main condtion only in MEk1 trasnaction.
By selecting the line item and then shift + F7 you can maintain fright or discount condtions for PB00 condition types with out having access sequence for supplement condtion types.
Regards,
shailesh Mackwan

I select agree on terms and conditions for icloud and it justs freezes the whole settings app. help? this is for ios 8

When i go to agree to the terms and conditions for icloud on ios 8, it just feezes and doesnt do anything. help?

Hello Nick,
have you already tired to restart the process?
Best regards,
David

Pricing Condition for Serivce Line Item

Hi Experts,
I'm trying to create a service PO with 1 Service line item and this service line item actually contains more than 1 service number. Using BAPI_PO_CREATE1, how can I define the pricing condition for each of the service number?
Currently, I'm able to define the pricing condition of the service item as a whole through this input parameter table POCOND.
Thanks.
Best Regards,
Weishan

Its really tricky requirement, when you are going for manual condition type.
- the best alternative to cater your requirement is to go for maintenance of condition record, which you can upload at mass with the help of LSMW. Also, will be really helpful in having report for pricing. Finally, reduce time to create sales order. Thus, discuss & encourage your user to maintain pricing based condition record. Only header condition should be on manual bases.
- If hard to convince your client on condition record. Then develop a routine with the help of ABAPer in your team. Where you can put logic. If the condition is manual enter and system is able find already entered value for material, then copy the price the slots where system don't find manually entered condition value.
Regards
JP

Query on event based job in a client schema and not SYS schema

Hi, I am fairly new to oracle job scheduler and wanted your inputs on how to create a event based job that sends a mail based on success of another job.
I was able to implement this with the jobs being created under SYS schema. I did get email notifcation when errors were logged in exception table.
However, now the requirement has changed to create the jobs under a client specific schema.
The jobs got created successfully in CLIENT schema but the event based job is not working. It does not send the email notification.
I feel this is to do with not correctly subscribing to the event queue {sys.scheduler$_event_queue}.
Can CLIENT schema use the agent "AGENT" created under SYS to subscribe to the Scheduler event queue {sys.scheduler$_event_queue}? CLIENT is the schema in which the all jobs and procedures are created.
BEGIN
DBMS_AQADM.ENABLE_DB_ACCESS('AGENT', 'CLIENT');
END;
--Main Job that will load data and errors will be logged into exception table
BEGIN
dbms_scheduler.create_job( job_name=> 'CLIENT.LOAD_DATA',
job_type=>'PLSQL_BLOCK',
job_action=>'BEGIN CLIENT.p_loaddata;
END;',
start_date=>systimestamp,
repeat_interval=>'FREQ=MINUTELY;INTERVAL=1;',
number_of_arguments=>0,
enabled=> true);
END;
--set raise_events attribute = job_succeeded for main job
BEGIN
DBMS_SCHEDULER.set_attribute ('CLIENT.LOAD_DATA', 'raise_events', DBMS_SCHEDULER.job_succeeded);
END;
--Event Job that will send email based on condition. Condition is checked in procedure CLIENT.p_check_sendmail; If errors are found in the exception table, this job will raise exception and will be JOB_FAILED status. This job will send a email notification.
BEGIN
DBMS_SCHEDULER.create_job (       job_name          => 'CLIENT.EMAIL_JOB',
job_type          => 'PLSQL_BLOCK',
job_action        => 'BEGIN CLIENT.p_check_sendmail;                                   END;',
event_condition => 'tab.user_data.event_type = ''JOB_SUCCEEDED'' and tab.user_data.object_name = ''LOAD_DATA''',
queue_spec        => 'sys.scheduler$_event_queue,AGENT',
enabled          => true);
END;
BEGIN
dbms_scheduler.add_job_email_notification ( job_name => 'CLIENT.EMAIL_JOB',     recipients => '[email protected]',events => 'JOB_FAILED');
END;
Is the way i am subscribing to the event queue correct? Could you please share an example/document of event based job in a schema other than SYS and how subscription is being done to event queue?
Thanks

Hi,
It's a good decision you made because you shouldn't create objects in the SYS schema. I see you're using the add_job_email_notification procedure, so I'm assuming you're on 11g onwards.
This procedure is meant to make the job easy for you. That is, you don't need to worry about setting up AQ, the procedure does it all for you. All you need to do is setup the mail server if not already done, and call this procedure to add the mail notification. That's it.
You can also specify a filter to the add_job_email_notification procedure, so maybe you could specify directly your CLIENT.LOAD_DATA job to this procedure.

Changing colour based on cells for ALV in Web Dynpro ABAP

Hi,
I have a requirement where I need to change the font color for some cells of ALV in Web Dynpro ABAP. I am able to change the font color for whole row or whole column but need to know how to change it based on cells.
My output should be something like the picture attached to this discussion. The coloumns/cells where I need the font colour can change for different rows, based on some internal condition.
Please let me know how to achieve this...... Thank you.
- Divya Posanpally

Hi Divya,
Your requirement can be achieved as below
Create an attribute for each column of alv i.e. COLOR_F1, COLOR_F2, COLOR_F3...... COLOR_F10 of type WDY_UIE_LIBRARY_ENUM_TYPE in the context node which holds the color value
Now while configuring ALV, set the field name of semantic color for each column as below
               data lv_color_fld_name type string.
               data lo_text_view type ref to cl_salv_wd_uie_text_view.
          loop at lt_columns into ls_column.
          concatenate 'COLOR' ls_column-id into lv_color_fld_name separated by '_'.
          lo_text_view ?= ls_column-r_column->get_cell_editor( ).
          if lo_text_view is bound.
          lo_text_view->SET_SEMANTIC_COLOR_FIELDNAME( value = lv_color_fld_name ).
          endif.
          endloop.
Set the color based on the condition
         loop at lt_data into ls_data.
                    if ..... "your condition here.
                    ls_data-color_f1 = cl_wd_text_view=>e_semantic_color-NEGATIVE.
                    ls_data-color_f2 = cl_wd_text_view=>e_semantic_color-POSITIVE.
                    elseif...... " another condition
                    endif.
          endloop.
Note: You can optimize the code as per your requirement
Hope this helps you.
Regards,
Rama

How to disable Buttons based on condition.

Hi
Need your help to disable button based on condition.
Please refer the application:
http://apex.oracle.com/pls/otn/f?p=34797:5:110582943383419::NO:::
login credentials:
workspace: vsanthanam
user: vijay
pswd: apex_demo
In the above application, i have 2 buttons in page 5, (Report1 and Report2)
Where i have to disable button based on the following conditon:
i) USER whoever has Admin value 'Y' in my table can access the button.
for this i've written a Button Condition : Type (EXISTS)
select 1 from apex_extra_values where rtrim(lower(empname)) like decode((select Admin from apex_extra_values
where rtrim(lower(empname))=rtrim(lower(V('APP_USER')))),'Y',rtrim(lower(V('APP_USER'))))
note: i have empname same as my APEx user name. with Admin access 'Y'.
By using this code i can able to hide the button for users who has no Admin access.
But my requirement is : i have to show the button even if the user is not Admin, but to grey out (disable the button - no action)
I tried using javascript function:
function disableButton(pThis)
pThis.disabled=true;
But either of this (exists condtion or JAvascript function) works in my case and not both.
Any pointer on this would be highlt appreciated.
Thanks
Vijay

Couple of things:
1. I would never use v('APP_ITEM') but :APP_ITEM - it is faster and there is no need to use this function within an application
2. The way you are doing this check is not the best approach. You should create an authorization schema and run this once per session. Whatever this authorization is returning as a result you can check using the following Function returning boolean:
IF apex_util.public_check_authorization ('MY_AUTH') THEN RETURN TRUE; ELSE RETURN FALSE; END IF;
See this example on authorization issues:
http://apex.oracle.com/pls/otn/f?p=31517:148
3. As far as disabling a button is concerned I think I explained the options. I also have an example on that here:
http://apex.oracle.com/pls/otn/f?p=31517:143
whereby it is not disabling but hiding a button.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Dataguard setup for selected schemas

Version:10.2, 11.2
Platform : Solaris 5.10
In our Production DB, we have some schemas which we do not want to be replicated at the standby site. Logical backup is enough for these schemas.
Instead of replicating the entire database, Is there a way we could set up dataguard in which the logs are shipped only for selected schemas?

With a Physical Standby Database , you always 'replicate' your whole Primary. With Logical Standby, though, you could exclude certain schemas from the 'replication'.
Another option would be - as already mentioned by others - to do a regular replication with Streams or Golden Gate and only replicate the schemas resp. objects that you deem important.
However, I would recommend that you review the requirement to exclude 'unimportant' schemas from your Standby Database. It makes the whole setup more complicated than necessary.
Just go with Physical Standby and ignore those schemas - why bother?
Kind regards
Uwe Hesse
http://uhesse.wordpress.com

Running Query Based on Condition

Hi
I want to run different query based on a condition. I am not able to execute the following query. is this the right way to run different query based on condition?
SELECT * FROM (
CASE WHEN (SELECT COUNT (*) from data1 where ID = 1 AND stype = 'A') > 0 THEN select * from data where ID = 1 AND stype = 'A'
WHEN (SELECT COUNT (*) from data1 where ID = 1 AND stype = 'B') > 0 THEN select * from data where ID = 1 AND stype = 'B'
WHEN (SELECT COUNT (*) from data1 where ID = 1 AND stype = 'C') > 0 THEN select * from data where ID = 1 AND stype = 'C'
END
) as a;
Edited by: user6016744 on 21 Apr, 2011 12:40 AM

This works for us; hope it helps.
CREATE OR REPLACE FUNCTION SCHEMA.GET_STEP_COST (loan_number_in in VARCHAR2, step_code_in in VARCHAR2 default null, ws_in in VARCHAR2 default null )
RETURN VARCHAR2 IS retval VARCHAR2 (50);
/*passing in loan number and step code you need the cost for, will return the cost*/
BEGIN
    CASE ws_in --depending on workstation in is the table select
    WHEN 'F' THEN
        EXECUTE IMMEDIATE 'SELECT '|| step_code_in ||' FROM CLAIMS_FCL_STEPS WHERE LOAN_NUMBER = '|| loan_number_in ||'' INTO retval;
    WHEN 'R' THEN
       EXECUTE IMMEDIATE 'SELECT '|| step_code_in ||' FROM CLAIMS_RS_STEPS WHERE LOAN_NUMBER = '|| loan_number_in ||'' INTO retval;
    WHEN 'L' THEN
       EXECUTE IMMEDIATE 'SELECT '|| step_code_in ||' FROM CLAIMS_LM_STEPS WHERE LOAN_NUMBER = '|| loan_number_in ||'' INTO retval;
    ELSE
        retval := 0;
    END CASE;
RETURN retval;
END GET_STEP_COST;
/

How to blink TreeView Nodes based on condition c#

suppose i am populating my tree view with data from database and i want to blink those nodes which has a specific data. now guide me with code how can i efficiently blink multiple tree view nodes based on condition in winform application.

Hi Mou_kolkata,
>> anyone can give me small working code for tree node blinking
Thank Armin for the details about blinking TreeView Nodes.
For a simple demo to blink TreeView nodes, you could refer the link below:
# Treeview control - How to make a node blink?
https://social.msdn.microsoft.com/Forums/en-US/64e7a4d7-3098-4370-990f-390cb3a640a1/treeview-control-how-to-make-a-node-blink
If you have issues when you blink Treeview nodes, please feel free to post a new thread in this forum, then you would get more help.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

AJAX Report Refresh a_report- Condition for display not being validated

Hi ,
I have a report which has the following condition for dispaly:
Exists(SQL query returs atleast one row) - SELECT * from temp1The query for the report is : select * from temp1 Now I have a button on the page and on click of the button I call the below Javascript :
function f_insert_Temp_table(pTrans){
      var l_Return = null;
      var get = new htmldb_Get(null,$x('pFlowId').value,
              'APPLICATION_PROCESS=temp_table_insert',206);       // ODP to insert into temp1
      get.add('TRANS_ID_ITEM',pTrans);
      gReturn = get.get('');
     //alert(gReturn);
     //$x_Show('6342610690289435');
     $a_report('6342610690289435','1','15','15');
}Everything executes fine and the report refreshes the rows but the condition used for display doesn't get checked when I call $a_report() ...
I can see the ODP execute successfully and row gets inserted into temp1 which means report condition is satisfied .
If I remove the condition for the report, I can see the report getting refreshed and showing new rows through the $a_Report() call.
Is there something that needs to be added to the script or $a_report call to validate the condition too ?Is there a way I can validate the region condition too ?
Appreciate any suggestions/pointers here. I really do not want to refresh the whole page.
Thanks,
Dippy
Edited by: Dippy on Feb 5, 2010 11:05 AM

Hi Flavio,
Thanks for your support.I figured where I was going completely wrong.
Its just that when the page loads for the first time the temp table is empty and hence the report is not being displayed which simply
means that the report id Im passing into the a_report function is not rendered on the page. Hence no matter what the temp table contains the report id is absent from the page.
I fixed it as follows :
Remove the condition for the report.
Added and item and computed(P_Compute) its value using select count(*) from temp.
Added an onload JS function which does a $x_Show('Report_Region') if P_Compute > 0 or $x_Hide('Report_Region') if P_Compute <0 .
Now in my JS function which has an AJAX call to an ODP does an $x_Show('Report_Region').
Flavioc : the query for my report is simple
select * from tempIt finally dawned upon me that I'm trying to catch hold of an ID that's not rendered.
So one issue is solved now the other part would be figuring out how to make $a_report work with pagination etc .

Unable to locate Spring NamespaceHandler for XML schema namespace

I am not sure if this is the best practice approach but this is the problem I am ruining into. Below, I explain what I am doing:
1) What I am doing:
=============
Based on the oracle incubator example (http://coherence.oracle.com/display/INCUBATOR/Processing+Pattern+Examples); I am running a server and submitting tasks through a proxy application that submits them to ProcessingPatternConfigurator; let's call my task processReport.
a) my processReport is using spring and ibatis together, I created a utility static class to obtain a spring context and retrieves beans using the following lines ( see exhibit "A1 and A2" below).
b) when my task calls the context and that spring loads, it is failing with the error show in exhibit "B".
I suspect I am missing a lib? I googled the error and searched you site but could find a meaningful discussion on it. I guess my question is if this is not the best approach, how do I integrated with spring initializing beans and setting up ibatis framwork, providing beans and database access through Ibatis for each task ruining on the grid (processReport).
thanks
A1) processReport (submitted in the grid) uses this line
AbstractXmlApplicationContext ctx = (AbstractXmlApplicationContext) AmrContextUtil.getInstance();
          System.out.println("Classpath loaded. Executing Report...");
          ReportProcessor repProcessor = (ReportProcessor) ctx.getBean("reportProcessor");
A2) Here is the AmrContextUtil:
import org.springframework.context.support.AbstractApplicationContext;
import org.springframework.context.support.ClassPathXmlApplicationContext;
public final class AmrContextUtil {
     private static AbstractApplicationContext ctx = null;
     public AmrContextUtil() {
          super();
     public final static synchronized AbstractApplicationContext getInstance(){
          if (ctx == null){
               ctx = new ClassPathXmlApplicationContext("classpath:config/applicationContext.xml");
               setCtx(ctx);
          return ctx;
     public final static synchronized AbstractApplicationContext getCtx() {
          return ctx;
     public final static synchronized void setCtx(AbstractApplicationContext ctx) {
          AmrContextUtil.ctx = ctx;
B) Here is the error reported by the server:
2010-02-10 15:42:28.312/57.986 Oracle Coherence GE 3.5.2/463 <Warning> (thread=GridExecutor:Thread-2
, member=1): TaskRunner - Failed to process 0x00000126B99E5524AC1F007AAB1587BBCFEC5E6637E1DED6CCB984
03D6AADF4D due to:org.springframework.beans.factory.parsing.BeanDefinitionParsingException: Configuration problem: Failed to import bean definitions from URL location [classpath:config/reports-application.xml] Offending resource: class path resource [config/applicationContext.xml]; nested exception is org.springframework.beans.factory.parsing.BeanDefinitionParsingException: Configuration problem: Unexpected failure during bean definition parsing
Offending resource: class path resource [config/reports-application.xml] Bean 'reportSqlMapConfig'; nested exception is org.springframework.beans.factory.parsing.BeanDefinitionParsingException: *Configuration problem: Unable to locate Spring NamespaceHandler for XML schema namespace [http://www.springframework.org/schema/util]*
*Offending resource: class path resource [config/reports-application.xml] Bean 'reportSqlMapConfig'*
-> Property 'resourceMap'
c)Here is my application-context.xml offending line:
<bean id="reportSqlMapConfig"
class="com.xx.report.generator.ReportSqlMapConfig">
<property name="resourceMap">
<map>
<entry>
<key>
<util:constant static-field="com.xx.report.domain.ReportType.FPA"/>
</key>
<value>classpath:config/diehardReportSqlMapConfig.xml</value>
</entry>
<entry>
<key>
<util:constant static-field="com.xx.report.domain.ReportType.FCN"/>
</key>
<value>classpath:config/falconReportSqlMapConfig.xml</value>
</entry>
<entry>
<key>
<util:constant static-field="com.xx.report.domain.ReportType.ODS"/>
</key>
<value>classpath:config/odsReportSqlMapConfig.xml</value>
</entry>
</map>
</property>
</bean>

My guess is that something is broken in the configuration of the cacheServer and its not finding
all of the dependencies that your process pattern application needs. Probably the best way
to debug this stuff is to define a static main in your runnable task which will make the call
to the run() method and invoke it as the main class using the identical settings (classpath,
run directory) that you are using to launch the Coherence cache server.
Regards,
Bob

How to create additional Line in file based on condition available as part of ZINVOIC02 Idoc segment

Scenario Details:
Receiving Zinvoic02 Idoc in PI. Idoc to file translation creates comma separated file with .csv extn
The logic was kept in such a way that how many E1EDP01 (items) are available in IDoc that many no of records will be created in csv file.
The file logic for some the fields is as below:
No of records
InvNumber
InvDate
CusNumber
LineitemDesc
Tax1Type
Tax1%
for 1st E1EDP01
E1EDK01-BELNR
E1EDK03-DATUM
E1EDK01-PARTN
Populate when E1EDP04/MSKWZ=O2 or O4 with E1EDP19/KTEXT
Hardcode when E1EDP04/MSKWZ=O2 or O4
Sum all E1EDP04 /MSATZ when E1EDP04/MSKWZ=O2 or O4
for 2nd E1EDP01
E1EDK01-BELNR
E1EDK01-DATUM
E1EDK01-PARTN
same as above
same as above
same as above
for 3rd E1EDP01
E1EDK01-BELNR
E1EDK03-DATUM
E1EDK01-PARTN
same as above
same as above
same as above
Additional Line to be created when one or more of E1EDP01 is having E1EDP04/MSKWZ = O3
same as above
same as above
same as above
Hardcode "REIM for USE TAX"
Hardcode ""
Hardcode ""
Now we have got addition requirement to add a new lineitem when tax code is equal to O3 for any of the E1EDP01.
Is it possible to create additional lineitem based on condition. If yes, please share what should be the approach.
How we can create the additional lineitem?
Currently we are using E1EDP01 to do context handling.
The target structure is :
MT_FILE
     INVOICE     0..unbounded
          InvNumber     0..1
          InvDate          0..1
          CusNumber     0..1
          LineitemDesc     0..1
          Tax1Type          0..1
          Tax1%               0..1

Hello,
Please add one extra field in the data structure of the target mapping and let its occurrence be 0..unbounded under the root node 'MT_ADP_Invoice'.
Apply the condition, if tax code MSKWZ (with its context changed to E1EDP01) equalsS to '03', then map it to the newly created target field whose occurrence is 0..unbounded.
This will then create an additional field which is your requirement.
The above is one way.
But if you want to have the same target field name as ADP_File appended for tax field being '03'.
Then in that case you can you two message mapping for one common operational mapping / interface.
In the first message mapping you need to have one target data structure created with the source data structure remaining the same as the one shown by you in scrn shot. Now this target data structure will be similar to the source, except that you need to add one more field at the end(name different from other fields) in target (whose occurrence should be 0..unbounded), and it needs to be mapped to E1EDP01 provided the tax code field MSKWZ(its context changed to E1EDP01) equalsS to constant '03'.
In the second message mapping you need to map the target structure of previous message mapping to the actual required structure. The newly added field should be mapped to ADP_File of your final target structure.
This will then create the same structure as required.
Note : Please change the occurence of ADP_File to 0..unbounded.
Regards,
Souvik

Replication based on condition for whole Schema

Similar Messages

Maybe you are looking for