Replication from 5.2 to 11g failing in Test Env, but works in my Sandbox

I am receiving this error over & over again in error log:
[09/Feb/2012:08:39:59 -0600] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Failed to connect to replication consumer 11gserver.example.com:1636
[09/Feb/2012:08:39:59 -0600] - ERROR<8318> - Repl. Transport - conn=-1 op=-1 msgId=-1 - [S] Bind failed with response: Failed to bind to remote (900).
I've googled & searched here and try the couple of suggestions that I found, but still can't get this to work.
I have gotten this setup once & it is working fine in my sandbox, but now that I am moving into our test environment it isn't working, and I can't find where I've gone wrong.
I have installed a new instance of 11g, on this instance I have:
- Imported Root CA for the 11g server (rootCA1)
- imported Root CA for the 5.2 server (rootCA2)
- Imported SSL cert for this server
- I can perform an LDAP search over ssl without any issues.
- Enabled replication via command line & set password
On the existing 5.2 server I have:
- It already had it's own cert & the CA for that Cert (rootCA2) imported
- I can perform an LDAP search over ssl without any issues.
- Imported the CA used by the 11g server (rootCA1)
- Enabled replication through the admin console, and entered the replication password set on 11g
- attempted to initialize the remote replica from the 5.2 console, this is when the error message starts.
On both servers I have verified that the old & new root CA show up in certutil, and that both servers trust both rooth CA's with "CT,," permissions.
I've compared everything I can think of between my sandbox environment that works & my test environment that doesn't, and I can't see any differences.
Any thoughts? Anything I can check that I may have overlooked?
Thanks
Brian
Edited by: BrianS on Feb 9, 2012 6:59 AM

I just had a thought about this. I tried replicating data from my Test 5.2 server that is failing, to my sandbox 11g server that is successfully receiving replication from my sandbox 5.2 server.
This fails with the same error message, so I believe my config error is on 5.2, but I still have no idea where.

Similar Messages

Printer GPOs fail on some computers but work on others - error code 0x80070034

Hello, I have a couple of GPOs that roll our printers. They have been running smoothly for quite some time, then suddenly started giving our errors on our newer machines. Meaning, the GPOs will work fine on some clients but will not work on others. Also
all other GPOs work fine on all clients. The clients are similar Lenovo Windows 7 64-bit machines.
This is the error: Event ID: 4098, Group Policy Printers. The computer '123.123.123.123' preference item in the 'Deploy printers - {3F6DE6D0-86DC-4D1F-AB99-81BC07F23F3C}' Group Policy object did not apply because it failed with error code '0x80070034 You
were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name.' This error was suppressed.
I turned every stone I could think of on the problematic machines but cannot find out a reason. I disabled anti-virus/firewall, I logged in as domain admin and I tried both user & computer GPOs. No luck. Notice that I can successfully connect manually
to the Printer shares (the ones used to distribute the drivers).
Domain is Win2008 R2. The printers "live" on a Win2012 machine and the drivers come from there. I am using Group Policy Preferences. Ideas are welcome.
Thanks
Christos

Hello and thanks for the suggestion. Yes the drivers are okay, all clients (working and not) run the same Win 7 x64. Let me summarize the situation:
- The GPO runs because the printer IP ports are created
- The Printer Shares (that distribute the drivers) are accessible because the printer is installed without any problems/warnings if I manually double click on them (the shares)
- Security prompts for driver installs are disabled
I also noticed the following. The error says "The computer '123.123.123.123' preference item in the Group Policy object ... etc" The IP mentioned in that error is NOT the computer/client running the GPO but the IP address of the target printer.
So the client thinks the Printer already exists or the IP is already taken (or something of that sort).
Here is the GPresult XML for this
<GPO>
<Name>Printers - deploy - user</Name>
<Path>
<Identifier xmlns="http://www.microsoft.com/GroupPolicy/Types">{5C21
1010-F5E0-445C-99F3-0B8A9D9CB680}</Identifier>
<Domain xmlns="http://www.microsoft.com/GroupPolicy/Types">mydomain.com</Domain>
</Path>
<VersionDirectory>34</VersionDirectory>
<VersionSysvol>34</VersionSysvol>
<Enabled>true</Enabled>
<FilterId>MSFT_SomFilter.ID="{6272C5C1-9C4E-40B7-BD5A-277ED70B337D}",Domain="mydomain.com"</FilterId>
<FilterName>Any Win Desktop OS</FilterName>
<IsValid>true</IsValid>
<FilterAllowed>true</FilterAllowed>
<AccessDenied>false</AccessDenied>
<Link>
<SOMPath>mydomain.com/Configuration/Sites/MainOffice</SOMPath>
<SOMOrder>3</SOMOrder>
<AppliedOrder>1</AppliedOrder>
<LinkOrder>4</LinkOrder>
<Enabled>true</Enabled>
<NoOverride>false</NoOverride>
</Link>
</GPO>

Crystal Reports export and print fails with SSL / https but works with http

Windows 2008 Server, 32-bit (IIS7)
ASP.NET 2.0
Ajax 1.0
Crystal Reports version 10.5.3700.0
http: printing works, export works
https: printing not working, only export to MS Excel and MS Word work.
I am able to generate reports using both http and https, and the toolbar icons are all showing. However, I am unable to print or export properly with SSL.
Printing prompts me with a select printer window, and then a window 'Retrieving Page 1' follow by two messages from Crystal Print Control both stating:
A communication error occured. Printing will be stopped.
Exporting generates various errors depending on which export method is being selected (however Excel and Word work over https).
I've found the same problem on this site and other forums, but never a resolution to get exporting and printing to work with SSL. Will someone please provide me assistance or possibly relay what settings they're using if they have Crystal Reports export or printing working over SSL in IIS7? Everything works fine when I change the address from https to http.
Please let me know if I can help by providing further information. We've gone through a great deal of possible solutions with code and I'm currently looking in to IIS settings again.
Thank you.

Thanks Ludek. I got it by searching KB number.
Unfortunately, it didn’t fix my problem even my IE (IE8 and IE 9) has correct setting. I double check my version. PrintControl.CAB is version 10.2.0.1146. we use VS 2005 Crystal report and VB .NET. It works fine on HTTP. But when we use HTTPS (SSL Certificate from go daddy).
1: Crystal report export
            Export to MS Excel, Word: pop us “File download”, then click “Save”. It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
            Export to RPt, Rich text format: It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
            Export to PDF : nothing happened.
2: Print:
            Pop up dialog to select printer, click “Print” “. Shows windows “Crystal Report Viewer” and pop us error message box. Title is “Crystal Print Control”. Message is “An communication error occurred. Printing will be stopped”. Click “OK” and pop up error message box again.
Please advise.
Thank you very much!

Query fails in BI Pub but works in other interfaces

I have a query that fails in BI Publisher with an 'ORA-00920: invalid relational operator' error but I drop the same query in toad and it works fine. I don't see an error but when one tool tells me something works and another tells me it doesn't, I tend to believe the one that works. There is a case statement in the where clause that seems to be the problem (see below). If I comment it out the query works in BI Pub. The case statement WORKS in Toad. I don't know how to troubleshoot a 'non-error' to make it work in in BI Publisher. Could it be a Toad thing?
where
o.orgpoint_nm in (:p_orgpoint_nm) and
i.inventory_status_desc in (:p_inventory_status) and
i.version_num in (:p_inventory_version) and
(case
when (:p_regulation_alt_nm) is not null and instr(lreg.regulation_alt_nm,(:p_regulation_alt_nm)) > 0
then 1
when (:p_regulation_alt_nm) is null and lreg.regulation_nm in (:p_regulation_nm)
then 1
end) = 1 AND
lreq.requirement_nm in (:p_requirement_nm) and
oi.effective_dt <= sysdate and etc.........

You could use the Word Page break and see if that works better..
Thank you,
Tony Miller
Webster, TX

AVI import fails for older files but works in iMovie

I have two sets of AVI files, one from early 2000 and newer post 2008.
Both groups of files import fine into iMovie 11.
however, only the newer group imports into FCP X.
I can convert the older files to MOV using QT, but this won't work well for many files.
Seems if iMovie can read, so should FCP X.

I have had a similar problem, where maye 8 out of 10 AVI format moves will download into iPhoto, but the rest simply never get there. I did get 107 out of 109 files OK but have seen worse. I can tell you about which camera it is, how I connect and so on, but first, this:
A small sidebar in the Bugs & Fixes column of the April, 2007 Macworld magazine (see page 89) mentions that: "the likely cause is a problematic third-party QuickTime Plug-in." and advises the reader to check for and remove plug-ins not installed by OSX.
I took the same camera and imported all 109 pics from my camera on a separate account of the same machine (20" i-mac but I don't think this is relevant) and got all 109 f 109 files just fine.
So, I think "problematic third party QT plug-ins may be a good call. Need to investigate this some more, but its a flaky problem and Macs are supposed to "just plain work".

Can't Upload Large Files (Upload Fails using Internet Explorer but works with Google Chrome)

I've been experience an issue uploading large (75MB & greater) PDF files to a SharePoint 2010 document library. Using normal upload procedures using Internet Explorer 7 (our company standard for the time being) the upload fails. No error message is thrown,
the upload screen goes away and the page refreshes and the document isn't there. I tried upload multiple and it says throws a failed error after a while.
Using google chrome I made an attempt just to see what it did and the file using the "Add a document" uploaded in seconds. Can't figure out why one browser worked and the other doesn't. We are getting sporadic inquiries with the same issue.
We have previously setup large file support in the appropriate areas and large files are uploaded to the sites successfully. Any thoughts?

File size upload has to be configured on the server farm level. Your administrator most likely set
up the limit to size of files that can be uploaded. This size can be increased and you would then be able to upload your documents.

Mac Lion macbook pro, download pdf files fails, no error messages but work in Safari.

On requesting a download of a pdf file the source supplies this but nothing appears in the Firefox download window. Same pdf appears happily in Safari. My MAC pro with same Firefox progreamme works OK also.

Disabling a plugin worked for me
Go to Tools, Add-ons, Plugins tab
then disable the plugin: Adobe Acrobat NPAPI Plug-in Version 10.1.3

Mounting partition fails at boot time, but works after system is up

**EDIT: ok, I know now the daemon array comes too late. Looks like I have to fiddle with initial ramdisk or mount the partition daemon-style. Which is recommended?**
I have a fakeraid array which works well with device-mapper. I use dmraid as a daemon to create the nodes.
No problem when I mount the partition after boot. But now I want to move my /home there, so it has to mount during boot.
When I have it inside fstab, I get a corrupt superblock error during boot and arch throws me into an maintainance shell.
What's wrong? Is fstab processed before the daemon array? If that is the case, what would be a good clean way to launch dmraid if it cannot be a daemon?
Last edited by mindfall (2008-01-24 01:14:58)

All you should have to do is put dmraid in the HOOKS line in /etc/mkinitcpio.conf and rebuild your kernel (pacman -S kernel26). This will enable you to even have your root partition on the raid array. Edit /etc/fstab to include your home as usual using the device-mapper created raid-set and correct partition.
Wiki on dmraid

VISA (Serial port) commands fail in the VI, but work in VISA test panel

Hi, I have an instrument which has a usb connection. When I connect it to a Windows 7 PC, it automatically picks up the driver and shows up as a "USB Serial Port (COM7) (Manufacturer is FTDI).
When I open up NI MAX, this device shows up as COM7 (ASRL7::INSTR) under "Serial and Parallel". And, when I click on Open VISA Test Panel, and try the "*IDN?" command, it works OK.
However, the VI (which just sends a VISA command "*IDN?") gives me a time out error (0XBFF0015) or a device/resource not present error ( 0XBFFF0011). Attached is a screenshot of the VI.
Any ideas why?
Thanks.
PS: I went through the process to create the VISA-USB driver, but that has some other issue, but I am trying to understand why this occurs. This device also has a GPIB port and when I use a USB-GPIB adapter, it works very well.
Solved!
Go to Solution.
Attachments:
problem_vi.JPG ‏24 KB

SysB1 wrote:
Hi, I have an instrument which has a usb connection. When I connect it to a Windows 7 PC, it automatically picks up the driver and shows up as a "USB Serial Port (COM7) (Manufacturer is FTDI).
When I open up NI MAX, this device shows up as COM7 (ASRL7::INSTR) under "Serial and Parallel". And, when I click on Open VISA Test Panel, and try the "*IDN?" command, it works OK.
However, the VI (which just sends a VISA command "*IDN?") gives me a time out error (0XBFF0015) or a device/resource not present error ( 0XBFFF0011). Attached is a screenshot of the VI.
Any ideas why?
Thanks.
PS: I went through the process to create the VISA-USB driver, but that has some other issue, but I am trying to understand why this occurs. This device also has a GPIB port and when I use a USB-GPIB adapter, it works very well.
Look up the examples that ship with LabVIEW. What you have there isn't quite complete - for serial VISA. While GPIB will work great with what you have, serial VISA requires you to configure your serial port and is a little more complicated to read.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Failed to load policis from repository in Jdeveloper 11g

Hi All,
While am trying to attach policy to a exposed service/external service to a composite.xml/external service, am getting below error in jdeveloper 11g.
"Failed to load policies from repository in jdeveloper 11g",
Can any body please share your input, why am not able to load policies?
I appreciate your help.
Regards
Santhosh Kumar. K

Thanks Wajid for your quick reply.
As per your instructions, you want me to set the default policy store path in the preferences.
so when am trying to do the same i didn't find the exact path in my machine, upto owsm folder which is same after that i didnt find any other folders(\policies\oracle)under it.
Path in my machine: <UserProfile>\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29\DefaultDomain\oracle\store\gmds\owsm
your path: <UserProfile>\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29\DefaultDomain\oracle\store\gmds\owsm\policies\oracle
Regards
Santhosh Kumar. K

How to reconfigure and restart GoldenGate Replication from MySQL to Oracle after a DDL operation on the source

I succesfully configured and performed the goldengate replication from MySQL 5.1 to Oracle XE 11g using GG 11g as per
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/goldengate/11g/GGS_Sect_Config_UX_MSQ_to_UX_ORA.pdf
After replication was successully started working I added a new column to one of the test tables TCUSTMER
ALTER TABLE TCUSTMER ADD COLUMN ADDRESS VARCHAR(64) DEFAULT NULL;
And inserted another row in the same table.
INSERT INTO TCUSTMER VALUES ('CLARK', 'CLARK BOATS', 'REDWOOD', 'CA', 'Test Addresss1');
As soon as I did that the replication broke.
2015-04-16 17:42:44 ERROR OGG-00146 VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <CAUSE OF FAILURE : Table Metadata Altered cause
WHEN FAILED : While processing table map event in log processor
Then I reverted the DDL change back to original
ALTER TABLE TCUSTMER DROP COLUMN ADDRESS;
and tried to run the replication again
But it is not starting as before.
What should I do to move forward with same setup.

Hi ,
Whenever you do a DDL change in the Source table, you have to make the same changes in the Target side also. Then recreate the Definition File, copy it to the Target side and Start the GoldenGate processes.
1. Add the column in the Target side.
2. Recreate the Definition File and copy it to the Target side.
3. Recreate the Replicat process in the Target side and try to start it.
Hope this works..!!!!!!!! Any other suggestions friends????????
Regards,
Veera

Kerberos Authentication between Sharepoint 2013 Foundation - SSRS 2012 - Oracle 11g failing with ORA-12638: Credential retrieval failed

I have set up SharePoint 2013 Foundation, SharePoint Reporting Services and SQL Server 2012 in a single server. I then created a Data Connection to Oracle 11g. Upon testing the connection, it throws the error “ORA-12638: Credential retrieval failed”.
Given below are the steps of installation and configuration.
Installation till basic authentication:
The installation has been done in a
single server.
Installed SQL Server 2012 (Developer version).
Selected only the following features:
Database Engine Services
Analysis Services
Reporting Services – SharePoint
Reporting Services Add-in for SharePoint Products
Management Tools – Basic
- Management Tools - Complete
2. Installed SQL Server 2012 SP1.
3. Installed SQL Server 2012 SP2.
  4. Installed SharePoint Foundation 2013.
5. Created web application (without Kerberos; we did not even create the SPNs).
      The application pool has been configured to use Reporting Services account since it is a single server installation. This account has been registered as a managed
account.
6. Created Site Collection.
7. Verified that Reporting Services is not installed.
8. Installed SharePoint Reporting Services from SharePoint 2013 Management Shell.
9. Verified that Reporting Services is installed.
10. Created a new SQL Server Reporting Services Service Application and associated the Web Application to the new SQL server Reporting Services Service Application.
11. Verified that SQL Server Reporting Services Service Application and its proxy have started. Reset IIS.
12. Created a Site.
  13. Created a Data Connection library with “Report Data Source” content type.
14. Created a Report Model library with “Report Builder Model” content type.
15. Created a Report library with “Report Builder Report” content type.
16. Uploaded an SMDL to the Report Model library.
  17. Added the top level site to Local Intranet instead of as a Trusted Site in the browser settings.
  18. Able to create and save a report using Report Builder.
Hence, basic authentication is working and SSRS is able to connect to Oracle database.
Next we have to configure Kerberos settings between SharePoint and SQL Server.
Implementation of Kerberos authentication
In the Report Server machine, opened the file C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting\rsreportserver.config and added the Authentication Types of RSWindowsNegotiate
and RSWindowsKerberos.
2. Set up the following SPNs.
               a) SQL Server Database Engine service (sqlDbSrv2):
                setspn -S MSSQLSvc/CER1110:1433 CERDEMO\sqlDbSrv2
                setspn -S MSSQLSvc/CER1110.cer.demo.com:1433 CERDEMO\sqlDbSrv2
             In the Delegation tab of the account, selected "Trust this user for delegation to any service (Kerberos only)".
b) Account: SharePoint Setup Admin account (spAdmin2)
     setspn -S HTTP/CER1110:9999 CERDEMO\spAdmin2
                setspn -S HTTP/CER1110.cer.demo.com:9999 CERDEMO\spAdmin2
                In the Delegation tab of the account, selected "Trust this user for delegation to any  service
(Kerberos only)".
c) Account: SQL Server Reporting Service account (sqlRepSrv2)
                   setspn -S HTTP/CER1110 CERDEMO\sqlRepSrv2
                   setspn -S HTTP/CER1110.cer.demo.com CERDEMO\sqlRepSrv2
                   In the Delegation tab of the account, selected "Trust this user for delegation to any service
(Kerberos only)".
3. Configure the Web Application to use “Negotiate (Kerberos)”.
4. Logged in as SharePoint Administrator to the SharePoint server and opened the top level site in the IE browser.
     The Event Viewer logged the login process for the SharePoint Administration account as
Negotiate and not Kerberos.
5. Implemented Kerberos for Oracle database and client.
     Able to connect to the Oracle database via Kerberos authentication using SQL Plus.
6. Turn on Windows Firewall.
7. While testing the site's data connection using Kerberos settings, got the error
“Can not convert claims identity to windows token. This may be due to user not logging in using windows credentials.”
      Note: The Data Connection for basic authentication still worked.
8. Created a Claims to Windows Token Service account (spC2WTS2).
9. Started the Claims to Windows Token Service.
10. Registered the Claims to Windows Token Service account as a Managed Account.
11. Changed the Claims To Windows Token Service to use the above managed account.
12. Verified that the Claims to Windows Token Service account (spC2WTS2) is automatically added to the WSS_WPG local group on the SharePoint box.
      Note: The Reporting Services service account is also a part of the WSS_WPG local group.
13. Added the Claims to Windows Token Service account (spC2WTS2) to the Local Admin Group on the machine having the SharePoint App Server.
14. In the SharePoint box, added the Claims to Windows Token Service account (spC2WTS2) in the Act as part of the operating system policy right.
15. The Claims to Windows Token Service account (spC2WTS2) has the WSS_WPG group configured.
      When the C2WTS service was configured to use the managed account Claims to Windows Token Service account (spC2WTS2) earlier, the spC2WTS2 account was automatically
added to the WSS_WPG local group on the SharePoint box. The WSS_WPG group in turn is configured in c2wtshost.exe.config file.
16. Verified that the Reporting Services account is a managed account and part of the WSS_WPG group.
17. Earlier Service Application Pool - SQL Server Reporting Services App Pool service was associated with the SharePoint Admin account.
      Changed this to associate the Reporting Service account with the Service Application Pool - SQL Server Reporting Services App Pool service.
18. Changed the delegation of the Reporting Service account to constrained delegation with Protocol Transitioning. This is because we are transitioning from one authentication scheme (Claims) to another (Windows Token).
      For this, the delegation has been changed to "Trust this user for delegation to specified services only". Also, selected the sub radio button "Use
any authentication protocol". Selected the Oracle Kerberos service as the service to which this account can present delegated credentials.
      Note: The Reporting Service account already had an HTTP SPN.
19. Next, the goal was to make the Claims To Windows Token Service account match the Reporting Service account.
       For this, we created a fake SPN for the Claims To Windows Token Service account since the delegation tab was missing.
       The delegation has been changed to "Trust this user for delegation to specified services only". Also, selected the sub radio button "Use any
authentication protocol". Selected the Oracle Kerberos service as the service to which this account can present delegated credentials.
20. Restarted the SharePoint server.
21. Tested the data connection with the Kerberos settings again.
       Got the error
“ORA-12638: Credential retrieval failed”.
Can anyone tell me what is wrong with this setup?

http://www.freeoraclehelp.com/2011/10/kerberos-authentication-for-oracle.html
Problem4: ORA-12638: Credential retrieval failed
Solution: Make sure that SQLNET.KERBEROS5_CC_NAME is set in sqlnet.ora and okinit has been run before attempting to connect to the database.
Do check
http://webcache.googleusercontent.com/search?q=cache:5a2Pf3FH7vkJ:externaltable.blogspot.com/2012/06/kerberos-authentication-and-proxy-users.html+&cd=5&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered. You can reach me through http://itfreesupport.com/

Questions regarding HR Org Structure replication from ECC to SRM

Hi Experts ,
We have SRM7.0 ( SP08) with ECC6 ( Ehp4) having Classic Scenario .
I managed to replicate entire HR Org Structure from ECC system to SRM system. I replicated O (Organization), S( Postion) and P ( Person), which successfully created O, S and CP in SRM with BP for O and US...Refered Note 934372, 312090, 550055 and help link on SDN./wiki.....etc
Now I have below questions in mind.
1. In SRM we requiers Org unit for Company Code, Purchase Organization and Purchase Group...which we set in FUNCTION tab for the requiered Org Unit with Checkbox and value of it and Logical system.....but in HR Org strcuture we do not have such Org Unit....so how to manage/create such these Org Units ( i.e.Company Code, Purchase Organization and Purchase Group ) ?...
Do I need to create these Org unit manually in SRM in PPOSA_BBP ? If yes, can I create these Org Unit above or between these replicated HR Org Units or I need to created it separtly in paralllel to these HR replicated Org Units?
2. If above I do, then what will impact on the delta /change replication from HR integraion ?
3. In ECC HR org Structure there are hundres of employee, out of that I just wanted to send the Postion ( we have postion based security in HR) whom only SRM Role had assigned . How it can be acheived ?
Will appricaite detail reply/suggestions
Thanks
NAP

Hi ,
Initially when I repliacted P of HR Org Struture it sucessfully craeted BP in SRM and was CP in Org Structure.
But suddenly , what happned don;t know, when I replicating Employees (P) in SRM , it is assigning to respective Postion (S), but BP is not creating in SRM and in the USERS_GEN for this User, its postion and ORg Unit to whom it assigned is giving below error
Determination of connections to object 'BP' of 'CP' '00000015' failed
Message no. BBP_UM_UI036
I checked all this as per Note 550055, 934372..etc....checked respetcive setting in table T77S0...I checked address alos....but no any clue......IDoC in SRM posting sucessfully....
Can anyone please suggest what should be the cause and solution of it ?
Thanks
NAP

Issue with Contract Replication from SRM to MDM - XML structure

Hi
We are having an issue with trnsfering a contract to MDM. We have released the contract for update to MDM in the contract through the distribute to catalog option. An XML is generated in SRM that gets sucessfully passed to PI through Catalogupdatenotification_out. In PI the XML fails in the Interface Determination step. the issue that has been noticed is that the XML that is generated in SRM does not contain product category or product ID which is basically what the condition mapping in PI checks for. The conditions in PI were setup as per SAP.
But now the XML fails in PI because it does not find a combination for Catalog type code = 03 and product category. Please find the XML structure in SRM and you will see that it does not have a product category even though the contract has one.
<?xml version="1.0" encoding="utf-8" ?>
- <n0:CatalogTransmission xmlns:n0="http://sap.com/xi/EBP" xmlns:prx="urn:sap.com:proxy:SS1:/1SAI/TASDE808778FFEB81012891:701:2010/10/07">
- <StandardBusinessDocumentHeader>
<ID schemeID="0080">56000004100000000220110616202243</ID>
<CreationDateTime>2011-06-16T20:22:43Z</CreationDateTime>
- <SenderParty>
<InternalID schemeID="PartyID" schemeAgencyID="SS1CLNT100">143</InternalID>
</SenderParty>
</StandardBusinessDocumentHeader>
- <Catalog>
<ID>5600000410</ID>
<CatalogTypeCode>03</CatalogTypeCode>
- <NameList>
<Name>(Copy of Contract 5600000395)</Name>
</NameList>
<ActionCode>04</ActionCode>
<CompleteTransmissionIndicator>true</CompleteTransmissionIndicator>
- <ValidityDateTimePeriod>
<StartDateTime>2011-06-13T12:00:00Z</StartDateTime>
<EndDateTime>2012-06-12T12:00:00Z</EndDateTime>
</ValidityDateTimePeriod>
- <CatalogContent>
- <ItemList>
- <Item>
<ID>1</ID>
<ActionCode>04</ActionCode>
<CompleteTransmissionIndicator>false</CompleteTransmissionIndicator>
- <PropertyValuationList>
- <PropertyValuation>
<PropertyReference>/CCM/PRICE</PropertyReference>
- <PropertyValues>
- <MultipleValue>
<Index>1</Index>
- <SimpleValue>
<AmountSpecification currencyCode="USD">1.0</AmountSpecification>
</SimpleValue>
</MultipleValue>
</PropertyValues>
</PropertyValuation>
- <PropertyValuation>
<PropertyReference>/CCM/PRICE_BASIS_QUANTITY</PropertyReference>
- <PropertyValues>
- <SimpleValue>
<QuantitySpecification unitCode="EA">1.0</QuantitySpecification>
</SimpleValue>
</PropertyValues>
</PropertyValuation>
- <PropertyValuation>
<PropertyReference>CCM/PMNTTRMS</PropertyReference>
- <PropertyValues>
- <SimpleValue>
<NameSpecification>0002</NameSpecification>
</SimpleValue>
</PropertyValues>
</PropertyValuation>
</PropertyValuationList>
</Item>
- <Item>
<ID>2</ID>
<ActionCode>04</ActionCode>
<CompleteTransmissionIndicator>false</CompleteTransmissionIndicator>
- <PropertyValuationList>
- <PropertyValuation>
<PropertyReference>/CCM/PRICE</PropertyReference>
- <PropertyValues>
- <MultipleValue>
<Index>1</Index>
- <SimpleValue>
<AmountSpecification currencyCode="USD">12.0</AmountSpecification>
</SimpleValue>
</MultipleValue>
</PropertyValues>
</PropertyValuation>
- <PropertyValuation>
<PropertyReference>/CCM/PRICE_BASIS_QUANTITY</PropertyReference>
- <PropertyValues>
- <SimpleValue>
<QuantitySpecification unitCode="EA">1.0</QuantitySpecification>
</SimpleValue>
</PropertyValues>
</PropertyValuation>
- <PropertyValuation>
<PropertyReference>CCM/PMNTTRMS</PropertyReference>
- <PropertyValues>
- <SimpleValue>
<NameSpecification>0002</NameSpecification>
</SimpleValue>
</PropertyValues>
</PropertyValuation>
</PropertyValuationList>
</Item>
</ItemList>
</CatalogContent>
</Catalog>
</n0:CatalogTransmission>
Edited by: vishakhrajeev123 on Jun 20, 2011 6:49 PM

Dear Krupa,
Thank you for your quick reply.
So we should consider the scenario where SRM is the central repository for the contracts, and all the changes done in SRM should be replicated to ERP.
In this scenario, do you know which steps should be done to allow contract replication from SRM to ERP? I already created a central contract in SRM but there is no message sent to PI.
Thanks in advance.
Regards,
Andreia

Challenges while Upgrading from OBIEE 10g to 11g

Hi Gurus,
This is Kiran again. This time I am back with the upgradation issues. We have a client which is currently on OBIEE 10g. All components are already configured in OBIEE 10g with client on RPD, Catalog and implemented all security levels for those.
Now the challenge is to upgrade all activities which we have configured in OBIEE 10g. I have seen lot of stuff online and understood how to upgrade from OBIEE 10g to OBIEE 11g by simply clicking on ua.bat file. But I am unable to understand the process how it is upgrading the securities and environments.
Can anyone help me out by providing necessary stuff I need to take care of before taking the decision to upgrade from OBIEE 10g to 11g.
And also please clear me whether we will have any challenges in upgrading process. If yes, then what kind of challenges we will face and what kind of necessary steps we need to implement to resolve it.
What kind of Architecture we need to follow?
How Schedulers will get upgraded?
Please help me out with your real experiences (Not the online websites). Your response will be highly appreciated and it will help lot of OBIEE professionals who are in the process of upgradation.
Thanks in Advance to all OBIEE GURUS.
Kiran

Hi Valli,
There is really great information available in this link. But I would like to know whether any one faced any issues while upgrading from OBIEE 10g to 11g. Please do share us few issues....
Edited by: 949144 on Nov 27, 2012 9:44 AM

Replication from 5.2 to 11g failing in Test Env, but works in my Sandbox

Similar Messages

Maybe you are looking for