Reply to and attach file Automator script
Please help. I've been working on this for hours.
Automator has an action to reply to an email in outlook. But I want to use mail. I tried writing an applescript the created a reply message -- but when I run the action "add attachement to front message" it doesn't see the outgoing reply. It works fine if the message created is a new message -- but not on the reply message -- which is where I need it.
The other option I tried was to just create a new message from the text in the original mail. The problem with that, is mail wants to put my signature at the bottom and I get figure out how to move it to the top.
If anyone has a solution that follows either of these options --- or a wholly other option. I would love the help. I do this several times a day and I want it automated.
Message was edited by: Dara Pressley
Thanks for the help rmgman. That actually does not work. Mail does not recognize the new message as a "quoted" reply so it doesn't pay any attention to that preference setting.
HOWEVER, after many hours I figured it out.
Basically...
1) Put in the txt I wanted as my signature (plain text only -- but I'll take it for now)
2) set that as a variable
3) found an applescript online that I altered to create all the text I needed. And compiles that into a new email that resembles a reply message.
4) get selected finder item
5) add to mail message.
Anyone who wants it can get a copy here @ http://dl.dropbox.com/u/8093803/send%20with%20mail%20reply.zip
Similar Messages
-
How to add "Comments" and attach files onto a form?
My server is LiveCycle ES 2.5, trial version, Turnkey install / Express mode with Reader Extensions.
Client side has IE8 and Reader X 10.1.2.
User interface is the standard out-of-the-box WorkSpace ES.
I have an application that routes a PDF form through a Workflow,
the input/output of the User Tasks is a Document variable that points to the PDF form.
I know that in the WorkSpace, ther's a built-in Attachment "tab" where the user can attach files and get them routed along with the form.
But how about Reader's "attach file" (the paper clip) and annotations (the yellow sticker)? how to allow users to use those features?
I tried it in the WorkSpace, and when the form is loaded in the IE window, those features were disabled.
How to enable them?
Do I need to modify the standard Render service? and add 'Apply Usgae Rights' or something?
is there an easier way that I missed?
thanksAttachments are lost if your form submits as XDP. If you change the submit type to PDF then server that same PDF back to the next user, the attachments will be there. If you decide for other reasons, you still want to submit as an XDP, take a look at this: http://forums.adobe.com/message/4316578#4316578
-
Upload and Attach file to Service Notificacion through Web Dynpro
Hi,
I need to upload and attach a file (Word, PDF, TXT ...) to Service Notificacion (TX - IW53) through Web Dynpro.
I have used the integration component "File Upload" to obtain the "fileName" atribute. Also, I have used the functions SO_OBJECT_UPLOAD, SO_INSERT_OBJECT and BINARY_RELATION_CREATE_COMMIT.
But have a problem, because the function SO_OBJECT_UPLOAD use the class "cl _ gui _ frontend _ services" and that clash with Web Dynpro.
My question is: how could I resolve that problem?
I look forward to your response.
ThanksIV_NAME Importing Type STRING
IV_CONTENT Importing Type STRING
IV_CONTENT_HEX Importing Type XSTRING
IS_LPORB Importing Type SIBFLPORB
IV_OBJTP Importing Type SO_OBJ_TP
RT_MESSAGES Returning Type BAPIRETTAB
method save.
data ls_message type bapiret2.
data:
filename type string,
filefullname type string,
mime_type type string,
size type i,
offset type i,
offset_old type i,
temp_len type i,
objname type string,
l_obj_type type so_obj_tp,
hex_null type x length 1 value '20',
l_document_title type so_text255,
file_ext type string,
lt_objcont type standard table of solisti1 initial size 6,
objcont like line of lt_objcont,
lt_ls_doc_change type standard table of sodocchgi1,
ls_doc_change like line of lt_ls_doc_change,
lt_data type soli_tab,
ls_data type soli,
lt_xdata type solix_tab,
ls_xdata type solix,
l_folder_id type sofdk,
ls_object_id type soodk,
l_object_id_fol type so_obj_id,
l_object_id type so_obj_id,
l_doc_info TYPE sofolenti1,
l_object_hd_change type sood1,
l_tab_size type int4,
l_retype type breltyp-reltype,
lt_urltab type standard table of sood-objdes.
get foler
l_folder_id = 'FOL29000000000004'.
call function 'SO_FOLDER_ROOT_ID_GET'
exporting
owner = sy-uname
region = 'B'
importing
folder_id = l_folder_id
tables
path_table =
if iv_objtp = gc_type_file.
size = xstrlen( iv_content_hex ).
get file name and extension
call method split_path
exporting
iv_path = iv_name
importing
E_PATH =
ev_filename = filename
E_PSERVER =
call method split_file_extension
exporting
iv_filename_with_ext = filename
importing
ev_filename = objname
ev_extension = file_ext.
ls_doc_change-obj_name = objname.
ls_doc_change-obj_descr = objname.
ls_doc_change-obj_langu = sy-langu.
ls_doc_change-sensitivty = 'F'.
ls_doc_change-doc_size = size.
offset = 0.
while offset <= size.
offset_old = offset.
offset = offset + 255.
if offset > size.
temp_len = xstrlen( iv_content_hex+offset_old ).
clear ls_xdata-line with hex_null in byte mode.
ls_xdata-line = iv_content_hex+offset_old(temp_len).
else.
ls_xdata-line = iv_content_hex+offset_old(255).
endif.
append ls_xdata to lt_xdata.
endwhile.
set object type relation type and other header info
l_retype = 'ATTA'.
l_obj_type = 'EXT'.
l_object_hd_change-objnam = ls_doc_change-obj_name.
l_object_hd_change-objdes = ls_doc_change-obj_descr.
l_object_hd_change-objsns = ls_doc_change-sensitivty.
l_object_hd_change-objla = ls_doc_change-obj_langu.
l_object_hd_change-objlen = ls_doc_change-doc_size.
l_object_hd_change-file_ext = file_ext.
prepare header
data lt_obj_header type standard table of solisti1.
data ls_header type solisti1.
concatenate '&SO_FILENAME=' filename into ls_header.
append ls_header to lt_obj_header.
clear ls_header.
ls_header = '&SO_FORMAT=BIN'.
append ls_header to lt_obj_header.
change hex data to text data
call function 'SO_SOLIXTAB_TO_SOLITAB'
exporting
ip_solixtab = lt_xdata
importing
ep_solitab = lt_data.
else.
for note
size = strlen( iv_content ).
objname = iv_name.
ls_doc_change-obj_descr = objname.
ls_doc_change-sensitivty = 'O'.
ls_doc_change-obj_langu = sy-langu.
put content into table
offset = 0.
if iv_objtp = gc_type_note.
it's a note
l_retype = 'NOTE'.
l_obj_type = 'RAW'.
l_object_hd_change-file_ext = 'TXT'.
read note content into table
while offset <= size.
offset_old = offset.
offset = offset + 255.
if offset > size.
temp_len = strlen( iv_content+offset_old ).
clear ls_data-line.
ls_data-line = iv_content+offset_old(temp_len).
else.
ls_data-line = iv_content+offset_old(255).
endif.
append ls_data to lt_data.
endwhile.
get title from content , if it's initial
if objname is initial.
read table lt_data index 1 into l_document_title.
while l_document_title+49 <> ' '.
shift l_document_title right.
endwhile.
shift l_document_title left deleting leading ' '.
ls_doc_change-obj_descr = l_document_title.
endif.
else.
it's url (not note)
l_retype = 'URL'.
l_obj_type = 'URL'.
if objname is initial.
split iv_content at '/' into table lt_urltab.
describe table lt_urltab lines l_tab_size.
read table lt_urltab index l_tab_size into ls_doc_change-obj_descr.
endif.
while offset <= size.
offset_old = offset.
offset = offset + 250.
if offset > size.
temp_len = strlen( iv_content+offset_old ).
clear ls_data-line.
ls_data-line = iv_content+offset_old(temp_len).
else.
ls_data-line = iv_content+offset_old(250).
endif.
concatenate '&KEY&' ls_data-line into ls_data-line.
append ls_data to lt_data.
endwhile.
endif.
ls_doc_change-doc_size = size.
l_object_hd_change-objnam = ls_doc_change-obj_name.
l_object_hd_change-objdes = ls_doc_change-obj_descr.
l_object_hd_change-objsns = ls_doc_change-sensitivty.
l_object_hd_change-objla = ls_doc_change-obj_langu.
l_object_hd_change-objlen = ls_doc_change-doc_size.
endif.
save object
call function 'SO_OBJECT_INSERT'
exporting
folder_id = l_folder_id
OBJECT_FL_CHANGE = OBJECT_FL_CHANGE
object_hd_change = l_object_hd_change
object_type = l_obj_type
ORIGINATOR_ID = OWNER_ID
OWNER = USER-USRNAM
importing
OBJECT_FL_DISPLAY = OBJECT_FL_DISPLAY
OBJECT_HD_DISPLAY = OBJECT_HD_DISPLAY
object_id = ls_object_id "l_doc_info-object_id
tables
objcont = lt_data
objhead = lt_obj_header
OBJPARA = OBJECT_PARA
OBJPARB = OBJECT_PARB
exceptions
component_not_available = 01
folder_not_exist = 06
folder_no_authorization = 05
object_type_not_exist = 17
operation_no_authorization = 21
parameter_error = 23
others = 1000.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4 into ls_message-message.
ls_message-type = sy-msgty.
ls_message-id = sy-msgid.
ls_message-number = sy-msgno.
ls_message-message_v1 = sy-msgv1.
ls_message-message_v2 = sy-msgv2.
ls_message-message_v3 = sy-msgv3.
ls_message-message_v4 = sy-msgv4.
append ls_message to rt_messages.
return.
endif.
create relation
data l_obj_rolea type borident.
data l_obj_roleb type borident.
MOVE-CORRESPONDING wd_this->ms_lporb to l_obj_rolea.
l_obj_rolea-objkey = is_lporb-instid.
l_obj_rolea-objtype = is_lporb-typeid.
l_obj_rolea-logsys = is_lporb-catid.
l_object_id_fol = l_folder_id.
l_object_id = ls_object_id.
concatenate l_object_id_fol l_object_id into l_obj_roleb-objkey respecting blanks.
l_obj_roleb-objtype = 'MESSAGE'.
clear l_obj_roleb-logsys.
call function 'BINARY_RELATION_CREATE'
exporting
obj_rolea = l_obj_rolea
obj_roleb = l_obj_roleb
relationtype = l_retype
exceptions
others = 1.
if sy-subrc = 0.
commit work and wait.
wd_this->MV_UPDATE_FLAG = 'X'.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4 into ls_message-message.
ls_message-type = sy-msgty.
ls_message-id = sy-msgid.
ls_message-number = sy-msgno.
ls_message-message_v1 = sy-msgv1.
ls_message-message_v2 = sy-msgv2.
ls_message-message_v3 = sy-msgv3.
ls_message-message_v4 = sy-msgv4.
append ls_message to rt_messages.
return.
endif.
endmethod.
Edited by: Reyleene Hunt on May 26, 2009 10:05 AM -
How to send JMS Message with use title, content, and attach file
I use OpenJMS server such as Message server
and use Tomcat 4.0 as web server.
I want to use JMS to send Message that message have
title, content, and can attach file.You probably wanna use SOAP. SOAP is based on XML, it has a soapheader (can have the title) the soapbody (has your actual message) and it can also have files attached.
read more here
http://www.w3.org/TR/SOAP/
The only thing you have to be carefull with is that when you want to put a SOAPMessage on a JMS queue, you have to serialize it
kind regards -
Photos, graphics and attached files with emailsI
I have the following problem with emails containing photos or graphics or when loading attached files : Half of the time, I cant see photos or graphics, I have empty frames. Loading attached files will never start and stay at 0 % I have set to load pictures. But even with the parameter set to "do not load picture " and using the " loading photos " button it s the same : not always working. Do you have it too? I have also the "retreiving... " message when I want to read mail. Thank you.
Am I the only one to have this issue ?
If someone could answer me : form time to time (half of the time...) I can't see photos or graphivs in my mails, I just have an empty frame... -
Report by email with whole report as body and attached file
Hello,
I try to send my Reports by mail and have to attach a file to the report.
But this filename is't a static one. Is there a work-around to attach a dynamic file to my e-mail.
Here is a part of my destination.xml file:
<foreach>
<mail id="DEST1" to="&<address>" subject="&<subject>">
<body srcType="report" format="html">
<include src="mainSection"/>
</body>
<attach srcType="file">
<include src="/coup_cache/&<filename>"/>
</attach>
</mail>
</foreach>Is it possible to create my own xml tag to solve this problem?
something like <myAttach file="xyz"/>
and something build up the necessary tag.
<attach srcType="file">
<include src="xyz"/>
</attach>
I don't know much about xml. I read something about xsl to do that?
Any ideas?
looking forward to read your hints
Avis -
Uploading and attaching files problem
Dear all,
Since a couple of weeks, I can not attach anything to a mail nor upload any image or file on any website (facebook, fileshare etc.).
The finder always freezes (no matter if it's Mail, Safari, Chrome or etc.) and I have to start the app again. I don't know where the issue comes from and I would appreciate any help on this matter.
I'm under OS X 10.9.2. (Macbook air 13")
Thanks for your help!
RossHistorically, if you wanted to send a UNIX folder via email, you would compress it into a foo.zip file. Apple understood this with Pages ’09 v4.n, when it took a Package (folder), compressed it, and renamed the .zip extension to .pages. All automatically, with general email and filesharing compatibility.
Along comes Pages v5+, with a totally new document architecture that is incompatible with prior Pages versions. To the Finder, it too looks like a file due to Package magic — and yet, in its natural state, is an uncompressed folder. To get this to play nice with Gmail webmail, and non-Apple filesharing services, you have to compress this document (folder) yourself before mail attachment, or placing on your preferred filesharing service. This is achieved by right-clicking the document icon, and choosing compress, which produces foo.pages.zip.
The other work-around is to simply not use Pages v5+, and resume using Pages ’09 v4.3. If you had Pages ’09 v4.3 previously installed, the new Pages installation moved it into /Applications/iWorks ’09. The trick here is that you cannot double-click on a document to open it as Pages v5+ will try to open it. You wil need the right-click contextual menu and Open With... Pages (4.3).
Yes, it is a PITA. -
SEND EMAIL WITH PO AND ATTACHMENT FILES
Hi,
I'm working with MySAP Enterprise 4.7 and I want to send the PO and its attachment vía e-mail, currently only the PO is being sent to the Vendor and the attachment only appears like texts into the "body" of PO. Is there some way to send e-mail with the PO and attachments at the same time??
I attached the document via DMS at position level.
Thanks in advanced for your answer and help!!
Regards,
Blanca Reyeshi
Follow these steps
Basically there are two mail types: Internet mail (external mail) and
SAPOffice mail.
Mail is sent via the output determination in both cases.
If you use the external mail, the message for the purchasing document is
converted into a corresponding text file which is sent to the vendor via
the Internet.
SAPOffice mail is sent only within the R/3 System and has mainly the
function of providing information.
In particular, it is not possible to attach a message (form) for a
purchasing document to a SAPOffice mail.
When using external mail, the following basic settings are required:
1. You must maintain an e-mail address in the address in the vendor
master.
2. The same applies to your own user master. You also have to specify
an e-mail address there in order to identify the sender.
o Note that it is not possible to change the e-mail address of the endor
o You can use a temporary email address in Transaction ME21N.
3. For the output type for default values, a communication strategy
needs to be maintained in the Customizing that supports the e-mail.
You can find the definition of the communication strategy in the
Customizing via the following path: (SPRO -> IMG -> SAP Web
Application Server -> Basic Services -> Message Control -> Define
Communication Strategy). As a default, communication strategy CS01
is delivered. This already contains the necessary entry for the
external communication. Bear in mind that without a suitable
communication strategy it is not possible to communicate with a
partner via Medium 5 (external sending).
4. Use the standard SAP environment (program 'SAPFM06P', FORM routine
'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
5. In the condition records for the output type (for example,
Transaction MN04), use medium '5' (External send).
6. You can use Transaction SCOT to trigger the output manually. The
prerequisite for a correct sending is that the node is set
correctly. This is not described here, but it must have already been
carried out.
7. To be able to display, for example, the e-mail in Outlook, enter PDF
as the format in the node.
To use the SAPOffice mail, the following basic settings are required:
1. For the output type for default values, a communication strategy
needs to be maintained in the Customizing that supports the e-mail.
You can branch to the maintenance of the communication strategy via
the input help.
2. Use the SAP standard environment (program "RSNASTSO" and FORM
routine "SAPOFFICE_AUFRUF") as the processing routines.
3. In the condition records for the output type (for example,
Transaction MN04), use medium '7' (SAPOffice) and also partner role
'MP' (mail partner).
Additional settings:
Problem:
How can you both change the mail title and text for the sending of a
mail message and maintain a replacement parameter, for example a
document number.
Solution:
1. The replacement routine is maintained in the Customizing for the
output type in the detail screen on the 'General data' tab under
'Replacement of text symbols' (for Release < 4.6B, this can be found
on the 'Mail' tab page).
Program: SAPMM06E
FORM routine: TEXT_SYMBOL_REPLACE
2. Maintain mail title and text.
o If you want to send a purchase order within an R/3 system using
the SAP office, you can maintain both the mail title ('Re:') and
also a mail text in the Customizing for the output type To do
this, select the directory mail title and text for the
corresponding message type.
o If you want to send a purchase order as (external) mail, for
example, to a vendor, you have to maintain the mail title in the
condition record for the output type (for example in Transaction
MN05) on the 'Communication method' tab page. Enter the mail
title in the 'Text for cover page' field. You cannot maintain an
additional mail text.
o Note that the values from the mail title are used to create the
description for the attachment.
3. The replacement parameters must be enclosed by &. Example: You want
to enter the title 'PO number '. For this you have to enter
the following in the Document Title field (Message Customizing ->
sub-option: Mail title and texts) 'PO number &EKKO-EBELN&'
Reward points if helpful
regards
chetan -
For later attach attempts, the plugin crashes. This has been ongoing problem for several months. About 3-4 months ago, there was a firefox update version that fixed this problem. However, it has occurred again for most recent 2 or 3 Firefox updates. I have changed Adobe setting dom.ipc.plugins.timeoutSecs to "-1" but this does not eliminate the problem. Please provide location for log files, crash reports, etc., that I might find and provide to developers for problem resolution. Thank you.
Anyone know how to read a crash report?
I can print with Lightroom, there is nothing wrong with the printer, or the file. But I want to print with Photoshop without a crash. Besides, Lightroom doesn't give me access to all of my print settings.
Hoping someone can help, I"m exasperated..... -
Best Practice/Standard for Securing and Attaching Files in a Web Service
Thanks in advance.
Being new to Web Services as well as most of my team. I would like to know what is the best practice for transporting files via a Web Service. I know of several methods and one that seems to be the standard, but you can't really tell in this ever changing world of Web Services. Below are the options that I have found.
1. MIME encoded the file and embed in the payload of the SOAP message
2. SwA (SOAP with Attachments) which applies MIME attachments to SOAP. I think this is similiar to the way emails are handled.
3. DIME (Direct Internet Message Encapsulation) similiar to MIME encoding but is more efficient
4. MTOM (Message Transmission Optimization Mechanism) I really not understand this method, but it seems that this is the NEW standard. I just don't understand why.
5. Utilize HTTPS and download the file from an accessible file server w/ a login id and password.
Is there someone out there that understands this problem and can assist me in understanding the pros and cons of these methods? Or maybe there is a method that I'm overlooking altogether.
ThanksJWSDP supports securing of attachments [1]and will soon support securing MTOM attachments too. [1]http://java.sun.com/webservices/docs/2.0/xws-security/ReleaseNotes.html
-
The sixth-generation iPod nano lets not read notes and attach files or other writings?
The ipod nano 6th generation have no or Notepad or another type of program that allows him to enter text files?
No, it doesn't have that function.
-
What I have already done:
TB has been made my default email client
I am logged in locally (not through MS)What do you mean logged in locally? Logged in to what?
-
please help me to find out whether i can reply email and attach some pdf or wordsheets and spreadsheets files from the ipad. for the moment, i can only attach photos which is linked by mail to camera roll.
highly appreciate for your input and enlightmentFirst timer and ten posts promoting this app. This is prohibited by the terms of use of this forum. It's great if if works, but since you seem to work for, or at least promote for the developers of this app, you should note in your post that you are affiliated with the company. The following is an extract of the relevant section of the Apple Support Communities Terms of Use.
No advertising. Do not use the Site to sell or market your products to others and do not post a URL unless it directly answers a user's question. If any portion of your Submission, including any posted URL, results in any accrual of compensation or benefit to you, you must note this in your post by stating, "I may receive some form of compensation, financial or otherwise, from my recommendation or link." As well, the following are not allowed:
A submission created solely to advertise a book, service, software or some other item for sale.
Any reference, including a link, to a commercial item that is not directly related to a relevant technical support question or answer. For example: "This post created by Super Post Creator."
You may sign your Submissions with information about yourself. However, this should not include a link to a website. An example of an acceptable signature:
Justine R.
Author, "Apple Lisa Communities: Tips and Tricks" -
Can I create an 'attach files' button in a pdf form?
Hello,
I'm working on a mac and want to create and 'attach files' option to my briefing form. Clients will access the form in reader, attache word documents then submit the form.
I have no javascript experience and am not too advanced with Acrobat so will need very basic instructions if it is possible.
Thanks for any help.
Cheers,
Leah =)I just responded to this here: http://acrobatusers.com/forum/forms-acrobat/create-attach-files-button-pdf-mac
-
Convert Screen(spool) to PDF file sending mail with attach file
Hi :
I'd like convert spool list to pdf and sending file...
so, I read thread about spool convert to PDF before,
and know how to convert Spool to PDF file and send mail with attach file.
but I have a problem.
my solution as:
step 1. Call function: "CONVERT_ABAPSPOOLJOB_2_PDF"
step 2. Call function: "SO_NEW_DOCUMENT_ATT_SEND_API1"
then, I got a mail with attached PDF file, but the PDF file display limited 255 line.( SO_NEW_DOCUMENT_ATT_SEND_API1 limited)
I want to showing word is wider that 255.
and then I find a manual method as:
After program finished.
Function Menu -> system -> List -> Send
use Prog: "Create Document and Send"
I use this prog sending mail and attached file ,
PDF file do <b>NOT</b> have 255 word limit !
finally. my question is, If I want sending mail as Prog: "Create Document and Send", how to do?
which Function I have to use?...
Please help me, Thanks!Hi,
Check this sample code of sending spool as attachment to an email address..
Parameters.
PARAMETERS: p_email(50) LOWER CASE.
PARAMETERS: p_spool LIKE tsp01-rqident.
Data declarations.
DATA: plist LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: document_data LIKE sodocchgi1.
DATA: so_ali LIKE soli OCCURS 100 WITH HEADER LINE.
DATA: real_type LIKE soodk-objtp.
DATA: sp_lang LIKE tst01-dlang.
DATA: line_size TYPE i VALUE 255.
DATA: v_name LIKE soextreci1-receiver.
DATA rec_tab LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
Get the spool data.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = p_spool
first_line = 1
last_line = 0
desired_type = ' '
IMPORTING
real_type = real_type
sp_lang = sp_lang
TABLES
buffer = so_ali
EXCEPTIONS
no_such_job = 1
job_contains_no_data = 2
selection_empty = 3
no_permission = 4
can_not_access = 5
read_error = 6
type_no_match = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE s208(00) WITH 'Error'.
LEAVE LIST-PROCESSING.
ENDIF.
Prepare the data.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 0.
plist-body_num = 0.
plist-doc_type = 'RAW'.
plist-obj_descr = 'Test ALV'.
APPEND plist.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 1.
DESCRIBE TABLE so_ali LINES plist-body_num.
plist-doc_type = real_type.
Get the size.
READ TABLE so_ali INDEX plist-body_num.
plist-doc_size = ( plist-body_num - 1 ) * line_size
+ STRLEN( so_ali ).
APPEND plist.
Move the receiver address.
MOVE: p_email TO rec_tab-receiver,
'U' TO rec_tab-rec_type.
APPEND rec_tab.
IF NOT sp_lang IS INITIAL.
document_data-obj_langu = sp_lang.
ELSE.
document_data-obj_langu = sy-langu.
ENDIF.
v_name = sy-uname.
Send the email.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = document_data
sender_address = v_name
sender_address_type = 'B'
TABLES
packing_list = plist
contents_bin = so_ali
receivers = rec_tab
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE e208(00) WITH 'Error'.
ENDIF.
COMMIT WORK.
Send the email immediately.
SUBMIT rsconn01
WITH mode = 'INT'
AND RETURN.
Thanks,
Naren
Maybe you are looking for
-
Yesterday my Firefox icon disappeared from my menu bar. I went into my applications and opened it. Every time I use it to reach gmail, I get a message that I'm using an out of date version and to download a new one. I download it. An installation dis
-
How to randomly show slides in Keynote
In May Cuztheyrefast posted this question (now archived). "Is there a way to shuffle the order of the slides? I am using Keynote for flashcards but I'm afraid I'll start to memorize the answers by order rather than actually knowing the answer. " This
-
Can't delete free books from iBooks
I tried to download a bunch of free books from iTunes. The download just won't work. Finally I decided to just try and delete them from my bookshelf. Nothing I tried worked; 1) Selected the undownloaded books in question and pressed "delete". Nothing
-
How to transform with xquery from CDATA to XML
Hi everyone I want to transform from CDATA to XML and I don´t know how to do. anyone can help me please? I'm using OSB OEPE PS3, I have artifacts: person.PROXY, person.BIZ, BIZ-Person.WSDL, PROXY-Person.WSDL, Person-response.xq and Person.xsd. I Use
-
Hi every one I am having problems with object CO-Item. I am trying to archive CO_Item in my variant I have to fiscal year 2005 and to posting period 12. But it picks up PM Orders from fiscal year 2006,2007 and 2008. Can anyone assit me with this