Report 2.5 : How to get error

Hi,
I have done the migratation of our application from report 2.0 to
report 2.5.
When a preview is starting, a window 'Report Progress' appeared
with a cancel press button.
If I press this button during "Initialilizing report" message, a
REP-0099 report is aborted at upon user request, after cliquink
on Ok, no report preview appears. It's Ok for me.
The same actions during "Formating Page x" make the message
REP-0099 appeared and the preview is ran. By navigating on the
report preview (next page), the REP-099 message appeared at the
page number for which the cancel operation have been processed.
I had tried to get the error number (srw.geterr_run) in all form
triggers. It doesn't work.
What i want is to stop the Report preview if the user had pressed
the Cancel button.
So, I would like to know if you have a method to stop the report
when Cancel button is pressed on the "Report Progress" window (by
getting error message in forms, or any other method).
Thanks.
DAVID RONGEAT.
null

It's not possible to use wild-cards in sql-substitution.
Here are your choices :
1) write xquery that does what you need - something like :
if ( sum( $whatever) ne 0 ) then
sum( $whatever )
else (: need to distinguish between sum==0 and sum==null :)
if ( some $x in TABLE()
where $x/key eq $thekey ) then
0 (: there were matching rows, but whatever we were summing was still 0 :)
else (: no matching rows, sum was 0 )
-9999
This is likely going to result in some ugly/less efficient sql
2) use sql substitution where needed. I don't see this as being any more evil than (1). If you have ten places where you need to do sql substitution - there will be ten places where you need to do (1), correct?
3) Create a Physical Data Service based on the sql-statement that you want to have executed. This is about as much work as (2), and about twice as hard to get correct.
4) open a case with customer support for a product enhancement. You won't get this enhancement - trust me.
5) change your requirements
6) Post here again asking "but can I do xyz instead?" - in which case I will point you to this case with the six options.

Similar Messages

In ME2N report for PO- How to get or add Vendor name in ALV grid output

Hl Everyone
How to get or add Vendor Name and payment terms in the ALV grid output for the follwing reports like ME2N and ME2V.
cuurently i am in 4.7 E version.
Kindly suggest..........
thanks in advance
Regards
Prashanth

Hi Pankaj
I knew that vendor name field is avaiable in ECC versions, but how to get the same field(vendor name) in 4.7 E vesion.
Kindly suggest
Regards
Prashanth

How to get errors and/or air.trace() from installed air app?

I'm trying to debug an installed air app that behaves
differently once installed than when run with adl. However, i can't
figure out any way to get errors or air.trace() information. I am
on OS X (10.5.6). Any tips?
I imagine this should be easy since debugging an installed
app is pretty much a necessity for development.

You can enable logging to a text file using settings in the
mm.cfg file. See
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19323
Note that ALL trace output will go to the log.
Other things you can do are:
1. Run the installed app with adl -- just pass the installed
app descriptor to adl on the command line
2. Supply a publisher id to adl. This removes one difference
between installed/ not installed apps and may be enough if the
behavior issue has to do with local connections or other matters
involving the publisher id.
3. Use the adl -nodebug flag. This removes another difference
between installed/uninstalled apps. You won't see uncaught
exceptions, but trace statements are still reported.

TS3212 How to get error 2 message to go away when downloading on windows 7

How to get itunes to download on windows

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

How to get Error Msg from A step in TestStand into a variable (with Record Result disable)

I have disable "Record Result" in a step (action) that call a Labview VI (Minimise memory usage during long run).
But I want to capture the error msg and put it in a local variable (locals.log).
So in the "Post Expression" of that step, I add:
locals.log = step.result.error.msg
But it always an empty string, Is the post expression executed when the there is an error in the step ?
So How can I capture it ?

Hi,
The trouble is that when a step errors, the Post Expression doesn't get executed.
Try using one of the Override callbacks - SequenceFilePostStepRuntimeError, ProcessModelPostStepRuntimeError or StationPostStepRuntimeError.
There is an example in the Examples\Callbacks.
The Step properties are passed as a parameter to the callback so you can get the error message and do your logging.
Hope this helps
Ray Farmer
Regards
Ray Farmer

How to get error information back from Office Web Apps server?

I'm developing a web application with an embedded Word iframe that interfaces with an Office Web Apps server; I am trying to implement the MS-FSSHTTPB protocol for my WOPI server.
More details here. When I send a bad response back to the OWA server it stops making requests to the WOPI server and sends the following error message back to the browser client: "Sorry, there was a problem and we can't open this document. If this
happens again, try opening the document in Microsoft Word."
Is there a way I can get additional information about what went wrong so that I can correct it?

Yes, this is closely related to SharePoint.
I'm trying to embed a Word editor in our web app. The Word iframe is served from the OWA server. It typically communicates with a SharePoint server to receive information about the document its trying to display.
I'm trying to implement the SharePoint portion. The servers communicate via the MS-FSSHTTPB protocol (among others) which I'm struggling to implement. When I send a response to the OWA server that it doesn't like then it stops replying. I'm wondering how
I can retrieve the exact error the occurred.
I believe I originally posted this question to Open Specifications > SharePoint Server Protocols.

How to get Error Trace on Linux

Hi All,
I am trying to run my JAR ( A simple JAR that uses JCO) on Linux SUSE 10, when I run it, it just gives me the following error, there is no trace.
How can I get the full trace. Please help.
This is what im doing and the next line is the error message.
dsadm@mach1:/opt/IBM/media/SAP/sapjco> java -jar ditest1.jar
The java class is not found: com/sap/mw/jco/JCO$Exception
dsadm@mach1:/opt/IBM/media/SAP/sapjco>
This is the (ONLY) class file in the JAR, I exported my JAVA project from NWDS as a JAR file.
package com.test;
* Conn.java
* Property of SAP AG, Walldorf
* (c) Copyright SAP AG, Walldorf, 2000-2003.
* All rights reserved.
import com.sap.mw.jco.*;
public class Conn {
// The MySAP.com system we gonna be using
static final String SID = "R3";
// The repository we will be using
com.sap.mw.jco.IRepository repository;
public Conn()
     System.out.println("**** DI11 *****");
         this.buildConnection();
       System.out.println("**** DI 22*****");
public void buildConnection(){
     try {
               System.out.println("**** DI2 *****");
            // Add a connection pool to the specified system
            //    The pool will be saved in the pool list to be used
            //    from other threads by JCO.getClient(SID).
            //    The pool must be explicitely removed by JCO.removeClientPool(SID)
          com.sap.mw.jco.JCO.addClientPool( SID,         // Alias for this pool
                                    10,          // Max. number of connections
                                    "040",       // SAP client
                                    "testuser",   // userid
                                    "pass", // password
                                    "EN",        // language
                                    "ipaddress",// host name
                                    "xx" );
            // Create a new repository
            //    The repository caches the function and structure definitions
            //    to be used for all calls to the system SID. The creation of
            //    redundant instances cause performance and memory waste.
            repository = com.sap.mw.jco.JCO.createRepository("MYRepository", SID);
          catch (Exception ex) {
            System.out.println("Caught an exception: \n" + ex.getMessage());
// Retrieves and prints information about the remote system
public void systemInfo()
    try {
      // Get a function template from the repository
      IFunctionTemplate ftemplate = repository.getFunctionTemplate("RFC_SYSTEM_INFO");
      // if the function definition was found in backend system
      if(ftemplate != null) {
        // Create a function from the template
        JCO.Function function = ftemplate.getFunction();
        // Get a client from the pool
        JCO.Client client = JCO.getClient(SID);
        // We can call 'RFC_SYSTEM_INFO' directly since it does not need any input parameters
        client.execute(function);
        // The export parameter 'RFCSI_EXPORT' contains a structure of type 'RFCSI'
        JCO.Structure s = function.getExportParameterList().getStructure("RFCSI_EXPORT");
        // Use enumeration to loop over all fields of the structure
        System.out.println("System info for " + SID + ":\n" +
        for (JCO.FieldIterator e = s.fields(); e.hasMoreElements(); ) {
          JCO.Field field = e.nextField();
          System.out.println(field.getName() + ":\t" + field.getString());
        }//for
        System.out.println("\n\n");
        // Release the client into the pool
        JCO.releaseClient(client);
      else {
         System.out.println("Function RFC_SYSTEM_INFO not found in backend system.");
     catch (JCO.Exception ex) {
       System.out.println("Caught an exception: \n" + ex);
// Retrieves and displays a sales order list
public void salesOrders()
     JCO.Client client = null;
    try {
      // Get a function template from the repository
      IFunctionTemplate ftemplate = repository.getFunctionTemplate("BAPI_SALESORDER_GETLIST");
      // if the function definition was found in backend system
      if(ftemplate != null) {
          // Create a function from the template
          JCO.Function function = ftemplate.getFunction();
          // Get a client from the pool
          client = JCO.getClient(SID);
          // Fill in input parameters
          JCO.ParameterList input = function.getImportParameterList();
          input.setValue("0000001200", "CUSTOMER_NUMBER"   );
          input.setValue(      "1000", "SALES_ORGANIZATION");
          input.setValue(         "0", "TRANSACTION_GROUP" );
          // Call the remote system
          client.execute(function);
          // Print return message
          JCO.Structure ret = function.getExportParameterList().getStructure("RETURN");
          System.out.println("BAPI_SALES_ORDER_GETLIST RETURN: " + ret.getString("MESSAGE"));
          // Get table containing the orders
          JCO.Table sales_orders = function.getTableParameterList().getTable("SALES_ORDERS");
          // Print results
          if (sales_orders.getNumRows() > 0) {
            // Loop over all rows
            do {
              System.out.println("-----------------------------------------");
              // Loop over all columns in the current row
              for (JCO.FieldIterator e = sales_orders.fields(); e.hasMoreElements(); ) {
                 JCO.Field field = e.nextField();
                 System.out.println(field.getName() + ":\t" + field.getString());
              }//for
            } while(sales_orders.nextRow());
          else {
            System.out.println("No results found");
          }//if
      else {
         System.out.println("Function BAPI_SALESORDER_GETLIST not found in backend system.");
       }//if
    catch (Exception ex) {
      System.out.println("Caught an exception: \n" + ex);
    finally {
       // Release the client to the pool
      JCO.releaseClient(client);
protected void cleanUp() {
    JCO.removeClientPool(SID);
public static void main(String[] argv)
    Conn e = new Conn();
e.systemInfo();
e.salesOrders();
e.cleanUp();
This is standard SAP code, please help on how can I get the complete error trace on linux.

You do not require RFCSDK to build a jaava application that uses JCO on LINUX.

How to get error message for VISA in CVI?

Hi there,
I was using labview 2012 to handle GBIP interface with VISA, the VISA write code will return an error cluster if exists. Recently, I switch to CVI and I use viWrite to write to the GBIP, but in this case, how can I get the error cluster?

Erik-S wrote:
Hi dragondriver,
There is not an error cluster in CVI in the same way that there are error clusters in LabVIEW. A VISA function should output an integer if there is an error, but it will not include a string and a boolean like LabVIEW does. You can set up a function that acts like an error cluster by creating a struct that has the error integer, a string related to that integer, and a boolean. You would have to use the integer to look up the error string from a library.
-Erik S
Thanks Erik. I found that when I operate the VISA, it actually return a number to tell success or failure only. I wonder how to extract the error message as string in CVI?

How to get error's field name when execute sql error

I want to get the error's field name when execute sql error,but SQLException is not provide corresponding function to get it.
How can I do for it?

user523110,
I believe the "unique constraint" error message displays the name of the constraint, not the column name, as you have posted.
As far as I know, the only way to extract the column(s) would be to query the data dictionary using the constraint name provided in the error message.
Also, as far as I know, there is nothing in the JDBC API that can return the names of the columns associated with a given unique constraint.
Good Luck,
Avi.

How to get error message on the same jsp

Hi guys,
I have a login.jsp page and I want an error message to be printed "login failed" in the same jsp page when the user enters the wrong credentials.
Any ideas on how to do that is highly appreciated.
Thanx in advance.sri

If you use struts it would have been a lot easier and better than only JSP.
In struts :
Add this line in ur JSP page
<html:errors/>
In ur Action servlet ex: LoginAction.java add thsi code extract in the appropriate position ...
ActionErrors errors = new ActionErrors();
errors.add(ActionErrors.GLOBAL_ERROR, new ActionError("error.user.wrong"));
if (!errors.isEmpty())
saveErrors(request, errors);
But in JSP do something like this:-
If authentication fails then post to the same JSP and put this code in the reqd position...
<%
String postFlag=request.getParameter("postFlag");
if(postFlag.equals("FAILED"))
%>
LOGIN FAILED
<%
%>
So for JSp simply set the request parameter (postFlag) to SUCCESSFUL/FAILED from your servlet.

How to get error and correct result in different file...

Hi,
sqlplus -s u/p@i >logfile /nolog <<EOF
@ sql script
exit
EOF
Is it possible to write sqplplus so as to get only connection related error in logfile and PL/SQL script related error in spool file.
Regards
Sri

Below is a sample script I used recently; here "2>" puts the errors into file mentioned and I spool inside the sql script I call from sqlplus session.
Also if you use this type of connection users can not see you database users password with unix ps command -
#!/bin/ksh
export SAMPLE_USERNAME="usernm"
export SAMPLE_PASSWORD="passwd"
export SAMPLE_DATE=$1
export SAMPLE_DIR="/xxx/yyy/log"
if [[ -z $SAMPLE_DATE ]]
then
   echo
   echo HATA : SAMPLE_DATE parametresi girilmis olmali!..
   echo
   exit -1
fi
cd ${SAMPLE_DIR}
retc=0
sqlplus -s > $SAMPLE_DATE.log 2> $SAMPLE_DATE.err <<EOF
$SAMPLE_USERNAME/$SAMPLE_PASSWORD
@/xxx/scripts/yyy.sql $SAMPLE_DATE
exit ;
EOFbest regards.

How to get error message from the BPEL process

Hi,
We have some BPEL processes running in BPEL PM 10g. If any of these BPEL process fails, we would like to get the error message caused this process to fail.
Please let me know where does the BPEL proccess holds (table/file) these details. or is it possible to get the error message programatically.
Thanks

You can go through below link that can help
http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/faults.htm#sthref1186
http://bpelknowledge.blogspot.com/2010/07/error-conditions-that-cannot-be-handled.html
http://blog.whitehorses.nl/2009/11/03/error-handling-in-soa-suite-11g/
Hope it helps!!
Thanks
AJ

1 distinct type of ORA- errors - "How to get error message"

How do I configure Grid Control to send the full error message on the "Generic Alert Log Error Status" alert instead of just having it tell me there has been an error found?

You need to add the rule:
Click
Preferences
Rules
Database Availability and Critical States, Click Edit
Metrics, Add.
Select: Generic Alert Log Error
Continue ... etc .etc
Hope this helps
Daryl
PS. I remove the Generic Alert Log Error Status -- dont need that extra email -- its useless.
Note too that you have to clear these alerts manually via the "Clear Alert" button or do a whole wack of them via the Alerts->Warnings tab, the select all, clear.

Ewa report not good. how to get ewa report to show all server for portal

hi experts
i am using solman sp23 but server for portal not showing all instance
only 1 out of 5 showing on report.
thank u
sunil

Hi Sunil,
Please check that you have run the Managed System Configuration using solman_setup. This step is important, especially if you had just updated your Solution Manager system.
Do you have the correct data in the Workload Analysis?
Regards,
Jared

Sales office differ in header n cust.master how to get error message

hi all,
i have a problem regarding sales office. in our project we define branch offices as sales office in SAP.sales n deliveries will be done through branch office. for that we created branch office as plant as well as sales office. we assign sales groups to customers.when creating sales order we r entering S.O, D.C, DIV N sales office.when ever sales office differs from customer master and what we r entering at the time of sales order automatically system taking header sales office it is not considering customer master sales office. for our project if sales office differs system should give error message, should not allow the user to create sales order. i think u people can help me.
thanks in advance

HI Chanakya.,
In order we dont give the sales office as it is picked directly from the customer master record ,If your client pressurise for that requirement of error message ,contact your ABAPERS so that they can satisfy the requiement
REWARD if helpfull
Thanks & Regards
Narayana

Report 2.5 : How to get error

Similar Messages

Maybe you are looking for