Report Action in JMS Proxy gets rolled back

I am using the report action to do auditing in my proxies. To date this has worked well for both successful and error transactions.
However when using a jms proy the report actions get rolled back. They actually didn't get rolled back when I was using the test console, but when the data comes from the queue they do.
Is there a way to change this behaviour so that the report is always separate from the main transaction?
Could this be a pointbase issue and will it have a differnt result using Oracle?
Thanks,
Ryan

You can always write your own implementation of a reporting provider, overriding teh default report action. I once made a post about this: http://forums.bea.com/thread.jspa?threadID=400001303
By using a custom implementation you can meet your own company's specific reporting requirements.
If you want to stick with out-of-box report action:
- Pointbase can be tricky, best to test with oracle.
- It depends on the jdbc driver used, ie XA or non-XA.
Find tips and tricks about ALSB at my blog: http://dev2dev.bea.com/blog/jordinho/

Similar Messages

One way child BPEL getting rolled back 11g

Hi,
I am stuck with a strange issue.
Here is my design :
Bpel1
1. Invoke : Call One way Bpel2 -> Bpel 2 calls DB adapter to insert data to Database
2. Throw rollback
When i throw rollback in BPEL 1 both : BPEL 1 & BPEL 2 gets rolled back , I need BPEL 2 to get commit to DB.
I tried below settings :
BPEL 1 : weblogic.wsee.wsat.transaction.flowOption = NEVER for calling BPEL 2
BPEL 1 : bpel.config.onewayDeliveryPolicy = async.persist
BPEL 2 : Service end point weblogic.wsee.wsat.transaction.flowOption = NEVER
BPEL 2 : bpel.config.transaction = requiresNew
BPEL 2: bpel.config.onewayDeliveryPolicy = async.persist
These settings didnt helped , please suggest.
Thanks
Sam

Hello Sam,
I have created two one-way BPEL Processes with the same settings you have mentioned. In order for the DB insert in the second BPEL to be saved, you need to add one additional property.
In BPEL1, for the partnerlink of BPEL2, add the property called 'idempotent' and give its value as false.
And now test the process again, this time, after calling the BPEL2 from BPEL1, you will be throwing a rollback fault, but the record which is inserted through BPEL2 will be there in the database which is what you want.
Here the idempotent property saves the current transaction after calling the BPEL2, and starts a new transaction.
Hope this helps,
N

Calling mysql stored procedure having insert sql commands within cftransaction is not getting rolled back

Hi,
cftransaction is working perfectly when all the insert
updates are called by cfqquery.
But when there is a mysql stored procedure call with in
cftrnsaction and that mysql stored procedure is having many inserts
and updates, cftransaction is not able to roll back insert/updates
happened in stored procedure.
I am using InnoDB tables/database of mysql.
Did anybody faced a similar problem and is it a coldfusion
bug or mysql bug.
We checked with Java and java is able to roll back the
transaction, but coldfusion cftransaction is failing.
Please help.
Regards,
Saikumar

Mark,
I believe the syntax of your formatted search is not right. I guess you are trying to get the U_Width from Item Master and the other values from the current form.
SELECT @Width = T0.U_WTH FROM [dbo].[OITM] T0.WHERE T0.ItemCode = $[$38.1.0]
EXEC TBC_CHOP @Width, $[$38.U_LINETYPE.0], $[$38.U_LI.0], $[$38.U_LN.0],
$[$38.U_LD.0], $[$38.U_HI.0], $[$38.U_HN.0], $[$38.U_HD.0], $[$38.U_QTYORD.Number]
If you see I have added a third parameter which is the Type to the formatted seach field selection $[$Item.Column.Type]
I have made then all 0 but you may change it as per the col type. This Type should be 0 for Char type columns, Number for numeric columns and Date for Date type cols
Suda

Cannot install itunes for windows 7 (64), repeatedly get "Roll back" and told to reinstall, but this does not work. Tried the latest ITunes 11 for 64. Same problem. I have an ipad which works OK. HELP

Unable to use iTunes for about a month on my PC
Have PC with windows 7 (64)
Own an iPad2, which is working with no problems
When I try to install iTunes it repeatedly fails via "Roll back" Tells me to reinstall, which does not work.
Tried latest update iTunes 11, same problem
Prepared to uninstall iTunes and start all over again, but how do I do this?

hi mate i think i may have just solved this for you. had the same problem as you, i uninstalled all apple products and quicktime and safari, did a disk clean up and deleted old restore points(might not need to but did it anyway) downloaded itunes from explorer and managed to install the new itunes 11 wooohooooo hope this helps buddy

MDB transaction getting silently rolled back?

          I have an MDB that is doing a delete of a database record in the onMessage method.
          It seems to work fine. I see no errors in the log, in fact I have some debug
          statements that indicate everything was completed normally. I even do a count
          sql using the same where clause and print the results and see a '0'.
          However, when I check the database, the record is still there.
          It seems as if the transaction is getting rolled back somehow. The MDB is transaction
          required/container tx. I never setRollbackOnly anywhere.
          The topic was originally published in a transaction that was rolled back, if that
          makes any difference. In fact, the point of the MDB is to clean up a record that
          was created during the transaction but not within the transaction.
          Any help is appreciated!
          ken


          It turned out that the MDB was using a different connection pool than it should
          have, which was pointed to an old copy of the database. So it wasn't really rolling
          back, it really was deleting records as desired, just in the wrong database.
          Thanks
          ken
          Tom Barnes <[email protected].bea.com>
          wrote:
          >Some random ideas:
          >
          >Is the app sending a delete request to the MDB, and
          >the MDB acting on it, before the record is even inserted?
          >
          >Does the delete request have the correct row-id/PK?
          >
          >Is the MDB app failing without your knowledge? You
          >can instrument the MDB onMessage() with a
          >"try catch Throwable" to see.
          >
          >Is the MDB tx timing out trying to get a lock
          >on the row? You can instrument the onMessage
          >with timestamps to see if its taking longer than 30 seconds...
          >
          >Tom
          >
          >Ken Clark wrote:
          >
          >> I have an MDB that is doing a delete of a database record in the onMessage
          >method.
          >> It seems to work fine. I see no errors in the log, in fact I have
          >some debug
          >> statements that indicate everything was completed normally. I even
          >do a count
          >> sql using the same where clause and print the results and see a '0'.
          >>
          >> However, when I check the database, the record is still there.
          >>
          >> It seems as if the transaction is getting rolled back somehow. The
          >MDB is transaction
          >> required/container tx. I never setRollbackOnly anywhere.
          >>
          >> The topic was originally published in a transaction that was rolled
          >back, if that
          >> makes any difference. In fact, the point of the MDB is to clean up
          >a record that
          >> was created during the transaction but not within the transaction.
          >>
          >> Any help is appreciated!
          >>
          >> ken
          >

Fading Rollover Widget - How to get it roll back in again on Rolloff?

Hey there,
sorry for that confusing title
For a nice menu effect, I would like to use the Fading Rollover Widget.
As fading type I went for "horizontal", however, once it has completed this action, the menu does not roll back in again on Rolloff.
Is there a way to fix this?
You can visit the site at kundenservice.n90media.de/n90media (regarding the menu on top of the page).
-Markus

You can use accordion menu , where menu items can be inserted in container.
Also , check the available ones here :
http://musewidgets.com/search?q=menu
Thanks,
Sanjit

Regarding DB adapter transactions roll back

Hi All,
In a BPEL, using while loop i'm trying to insert records in a table(business table-Oracle XE DB). If any errors happen during the insertion, it should rollback the previous insertions happened in the business table and insert the error details in the log table.
Example: Let's say 5 records need to be inserted in business table, after first two records get inserted successfully, due to invalid data, 3rd record fails to get inserted.
Things i have done,
1) I have a catch block to catch the errors
2) I have an invoke activity in the catch block to invoke the DB adapter to insert error details in log table.
3) Throw activity with bpelx:rollback to roll back the previous transactions.
Question: After the error details get inserted in log table, since i have a throw activity with bpelx rollback, all the previous DB transactions including the log table insertion is getting rolled back. I don't want my log table record insertion to be rolled back, only the records which i have already inserted successfully in the business table needs to be rolled back.
Can anyone let me know, how to handle such a situation? your response is greatly appreciated.

You need to ensure that your process is working in a single transaction.
You are correctly using the XA datasource.
Next you need to ensure that you do not have a dehydration point in the process and if there is a call to another BPEL process they are in a same transaction.

Stateless SessionBean Transaction not Rolling Back

I have a situation to create two Entity Beans within a single Transaction,
          so I created a Session Bean to create the two Entity Beans.
          I have the Session bean with attribute
          <session-type>Stateless</session-type>
          <transaction-type>Container</transaction-type>
          And 2 Entity beans with attributes:
          <persistence-type>Container</persistence-type>
          <trans-attribute>Required</trans-attribute>
          Inside the Session Bean I have a method which calls the create on the two
          Entity Beans.
          create ContactInfo(){
          Phone ph = phoneHome.Create(phoneData);
          Address ad = addressHome.Create(addressData);
          When the secound bean fails to create (Key voilation), my transaction is not
          getting rolled back.
          The Phone Create did not roll back eventhough the address create failed.
          Please give me some suggetion which transaction attributes to use
          I am using Weblogic 6.0


For Create Exceptions , the transactions may or may not rollback. Mostly it
          wont rollback. You have to set the sessionctx.setRollbackOnly() to mark it
          for rollback in the catch block of the Create Exception.
          Regards,
          Swaminathan K.N.
          santo comar <[email protected]> wrote in message
          news:3b8dbb61$[email protected]..
          > I have a situation to create two Entity Beans within a single Transaction,
          > so I created a Session Bean to create the two Entity Beans.
          >
          > I have the Session bean with attribute
          >
          > <session-type>Stateless</session-type>
          > <transaction-type>Container</transaction-type>
          >
          > And 2 Entity beans with attributes:
          >
          > <persistence-type>Container</persistence-type>
          > <trans-attribute>Required</trans-attribute>
          >
          > Inside the Session Bean I have a method which calls the create on the two
          > Entity Beans.
          >
          > create ContactInfo(){
          > Phone ph = phoneHome.Create(phoneData);
          > Address ad = addressHome.Create(addressData);
          > }
          >
          > When the secound bean fails to create (Key voilation), my transaction is
          not
          > getting rolled back.
          > The Phone Create did not roll back eventhough the address create failed.
          > Please give me some suggetion which transaction attributes to use
          >
          > I am using Weblogic 6.0
          >
          >
          >

Can't install itunes 11.0.1 on windows 7...get a Rolling Back Action message

Hi...I cannot install iTunes 11 on my Windows 7 PC. The installation goes all the way through and I get a "Rolling Back Action" dialog at the end and the progress bar just goes backwards.
Why is this happening?

Not an error that I've seen. What stage of the process are you at when this happens?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Messages not rolling back in JMS

We got the following scenario
PS->JMS BS->JMS PS->BS->External WS
When external WS is down,we are expecting the message to roll back,but it is not happening.
We are using OSB 10g.
Tried following,
http://atheek.wordpress.com/2011/04/21/transaction-handling-within-osb/
But there seems no In Proxy Service Configuration –>Message Handling Configuration –>Check Transaction Required" in OSB 10g.We have done rest of the configs as per the link.
Any help here please!

When the web service is down, are you getting any http response (500, 503, 404 etc) from the service ? You can test using test console and check the value of $outbound in the trace. HTTP transport will rollback the message only if it doesn't get any http response from the invoked service. In 11g, to overide this and rollback the message even in case HTTP response is present, you need to mark the same transaction for response checkbox. I am not sure how to do this in 10g.
In older alsb versions we need to set a certain command line property . This was discussed here : OSB JMS transaction
You can check with support on what exactly you need to do in 10g.
Edited by: atheek1 on 24-Jun-2011 02:54

Report and Alert don't executed in the error handler with a JMS proxy service

Hi,
I'm working with OSB 11.1.1.4.0 and I'm facing a problem with the error handler of my JMS proxy service.
My error handler contains two main elements :
- a Report action
- an Alert with a JMS destination defined
When the business service failed the message remain in the queue. It's the expected behavior.
The problem is :
- the report is missing
- the alert is raised but missing in the JMS destination defined in the Alert setting.
I've noticed if I add a Reply with Failure or Success, Report and Alert are successfully executed.
Unfortunately the message don't remain in the JMS queue.
What can I do in order to have my report/alert done and the JMS transaction rollback in order to keep the message in the queue ?
I've already met this problem in the past with alsb v3 and my solution was to add Service Callout in the error handler in order to externalize these actions.
This solution is not convenient and I hope another solution is possible.

Inventorying workgroups can be difficult, especially when it comes to remote access and network security. Because workgroups are not centrally managed, some of the items discussed in this
wiki article on preparing your workgroup environment may require you to visit each machine individually.
For non-domain credentials, you do not use the <systemname>\<user> format, you simply enter the user name. Regarding how to enter the credentials, if you have an account that uses the same username and password on all machines and is an administrator
on all of those machines, then you can enter that in the All computers credentials page of the wizard. You can also do this if they are different user names. However, if some machines have an account with the same user name, such as Administrator,
but different passwords on each machine, you will need to use the Manually enter computer names discovery method, and then enter the information for each group or each machine.
As you can tell, workgroup environments can quickly negate any benefit that the agentless inventory nature of MAP provides.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Everytime i try to download itunes it says rolling back action and error . i dont know what to do please help . P.S. i have windows 8

everytime i try to download itunes it says rolling back action and error . i dont know what to do please help . P.S. i have windows 8

Hello there Unicornbarf534,
Thank you for using Apple Support Communities.
It sounds like you are unable to successfully install iTunes. I recommend the troubleshooting instructions in this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Here is a general outline of where the troubleshooting will take you:
General installation troubleshooting
1. Empty your Temp directory and restart
2. Completely remove iTunes and related components
3. Install the latest version of iTunes
Additional troubleshooting
After performing each of the steps below, you will need to completely remove iTunes and related components and then install iTunes again to determine whether the issue is resolved.
1. Make sure you have administrator account access
2. Make sure your folder names don't contain strange characters
3. Get the latest Windows updates
4. Disable other conflicting software
Additional Information
If you only need to install QuickTime, or if iTunes installs but QuickTime installation did not complete
Try downloading and installing the standalone version of QuickTime from http://www.apple.com/quicktime/download/. Be sure you download the version that does not include iTunes.
If the steps outlined in this article don't help, you may be able to find a solution to your issue by searching the Microsoft support website.
All the best,
Sterling

Reinstall Elements - "Rolling Back Action" Error

I am trying to reinstall Elements 7. I need to do this because I had a system problem and I needed to do a clean new Windows XP install. As a result of the XP reinstall, I have had to reinstall all my programs.
What happens with Elements is that I get to the screen that says "Registering Product" and the system stops, gives me a message that says "rolling back action" and the installation stops.
I called Adobe install help and they were less than useless. They first had me run the Windows Installer Utility followed by the Adobe CS4 Clean Script. Neither program found any problems and they did not help. They then had me set up a new User ID on my computer and told me to log on as the new user. Again - no joy.
I have successfully reinstalled Elements 3, Lightroom 2,5, Photoshop CS2 and Adobe Acrobat without any difficulty.
When I did a WEB search on this problem, the only useful thing that I found was Adobe Service note kb406851 which talks about removing a cache file. I do have that cache file but the note also says that I may have to reenter the serial numbers for my other Adobe programs. I am loath to take this step.
Any suggestions would be appreciated.
DON

This might be happening because of some of the bits of PSE 7 which didnt got removed from the machine while you removed/uninstalled PSE7.
Try following the steps mentioned in the below link and make sure that all the bits have been removed and then try to install PSE7 again.
http://kb2.adobe.com/cps/405/kb405847.html
Regards,
Ankush

How to get data back from an action ?

Hello,
Would it be possible to get data back from an action (out of the question EO_MESSAGE & ET_FAILED_KEY )?
For example we got an order with order positions and we need a "function" to e.g. count all positions. Because of Performance the function should not be processed each time the order is changed, read or a position is added. Instead the function should be processed only if it was called explicitly.
Is it possible to create a kind of action which is actually counting all entries and export the number of them?
How to mark a parameter in is_parameters as exporting?
Is this just done by (naming-) convention?
What is the preferred way to have “methods” with returning/exporting values?
Regards,
Lorenz

Hello Lorenz,
As you have already figured out , the Action API provides you with only the messages and failed keys if any.
Post action execution , you can always execute a retrieve or retrive by association , to get the latest buffer snapshot , which of course would include the changes that you have made in your action.
If you want to ensure that users have explict control on execution of your "fucntion", then of course , you should model it as an action on the BO.
The parameter is_parameters is an IMPORTING parameter. You CANNOT use it to export anything back from the action. For importing , you can of course have any structure to use as the is_paramaters , which you model as the action parameter structure which modelling your BO action.
From an external entity the only way to interact with a BO is by consuming the BO services and you are bound by the BOBF standard interfaces. Any and all data you require needs to be modelled as node attributes ( persistent or transient ) and fetched using the RETRIEVE, RETRIEVE_BY_ASSOCIATION or QUERY services.
Regards,
Indranil.

Can i cancel the eraser of my iphone done by icloud? i lost my iphone and do the eraser, but i have get it back, and i want to cancel the action. Can i do that? and How?

I lost my iphone, and then I said to iclou to eraser the iphone whet it get internet, but after some days I managed to get it back. I tries to cancel the action, but i cant. The problen is that my computer is broken and I cant get back the Backup. What can i do? Where I have to send a Email o call? Can Anybody help me?
Thanks.

Thanks for all.
Finally i did all with Itunes of a friend. I did the backup of my phone, i autorithez the computer, tranfer all the buys. Then i conect the iphone to the internet, get eraser. And then restore with the backup. And all done.
Nothing of phoneview or same similar programs.

Report Action in JMS Proxy gets rolled back

Similar Messages

Maybe you are looking for